Pali Rohár [Tue, 21 Dec 2021 11:20:11 +0000 (12:20 +0100)]
arm: mvebu: Convert board_pex_config() to CONFIG_SPL_BOARD_INIT
The only user of board_pex_config() weak function is A385 controlcenterdc
board. It looks like that code in its board_pex_config() function needs to
be executed after PCIe link is up. Therefore put this code into
spl_board_init() function which is called after a38x serdes initialization,
and therefore it is after the serdes hws_pex_config() function finishes
(which is the state before this change).
With this change completely remove board_pex_config() function as it is not
used anymore.
Simon Glass [Thu, 13 Jan 2022 02:26:25 +0000 (19:26 -0700)]
bloblist: Relicense to allow BSD-3-Clause
This implementation is intended to be copied to other projects and
modified, to as to foster a standard means of communcating runtime
information between firmware projects.
The GPL-2 license is too restrictive for some projects, e.g. those
intended as reference implementations rather than designed for
collaborative open-source development.
Simon Glass [Thu, 13 Jan 2022 02:26:22 +0000 (19:26 -0700)]
bloblist: Refactor Kconfig to support alloc or fixed
At present we do support allocating the bloblist but the Kconfig is a bit
strange, since we still have to specify an address in that case. Partly
this is because it is a pain to have CONFIG options that disappears when
its dependency is enabled. It means that we must have #ifdefs in the code,
either in the C code or header file.
Make use of IF_ENABLED_INT() and its friend to solve that problem, so we
can separate out the location of bloblist into a choice. Put the address
and size into variables so we can log the result.
Add the options for SPL as well, so we can use CONFIG_IS_ENABLED().
Simon Glass [Thu, 13 Jan 2022 02:26:21 +0000 (19:26 -0700)]
bloblist: Use 'phase' consistently for bloblists
We typically refer to the different U-Boot builds that a board runs
through as phases. This avoids confusion with the word 'stage' which is
used with bootstage, for example. Fix up some bloblist Kconfig help
which uses the wrong term.
Simon Glass [Thu, 13 Jan 2022 02:26:19 +0000 (19:26 -0700)]
bloblist: Use explicit numbering for the tags
At present if someone adds a tag in the middle of the list it works well
enough within a U-Boot build. But if these tags are used in another
project, or with an older version of SPL, the numbers make become
inconsistent.
Use explicit tag numbers that never change, to resolve this problem.
Allocate areas for existing U-Boot tags and set up an area for use by
projects and vendors, as well as for private use. Keep tags above
0x10000 unallocated for now.
Update bloblist_tag_name() and the tests to work with this new setup.
Simon Glass [Thu, 13 Jan 2022 13:47:55 +0000 (06:47 -0700)]
stddef: Avoid warning with clang with offsetof()
Some bright sparks have decided that a cast on a constant cannot be a
constant, so offsetof() produces this warning on clang-10:
include/intel_gnvs.h:113:1: error: static_assert expression is not an
integral constant expression
check_member(acpi_global_nvs, unused2, GNVS_CHROMEOS_ACPI_OFFSET);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
include/linux/kernel.h:284:2: note: expanded from macro 'check_member'
offsetof(struct structure, member) == (offset), \
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
include/linux/stddef.h:20:32: note: expanded from macro 'offsetof'
^
include/intel_gnvs.h:113:1: note: cast that performs the conversions of
a reinterpret_cast is ot allowed in a constant expression
include/linux/stddef.h:20:33: note: expanded from macro 'offsetof'
Fix it by using the compiler built-in version, if available. This syncs
the function to the same implementation as Linux v5.16 in this header
file.
Andre Przywara [Tue, 11 Jan 2022 15:34:50 +0000 (15:34 +0000)]
genboardscfg: limit to 240 jobs
When genboardscfg.py is run on machines with 255 or more cores, the
process will consume more than 1024 file descriptors, which is a common
standard ulimit for user processes. As a consequence it will fail with a
lenghty Python trace, with the almost hidden message:
OSError: [Errno 24] Too many open files
It's somewhat questionable whether that level of parallelity is actually
useful for genboardscfg, so we limit the *default* number of jobs to the
safe number of 240, to avoid the problem.
If a user persists, she can still force a higher number via the -j
parameter - hopefully having raised the ulimit accordingly beforehand.
Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
U-Boot define loff_t as long long. But the header
/usr/include/linux/types.h may not define it.
This has lead to a build error on Alpine Linux.
So let's use long long instead of loff_t for
the size parameter of function os_get_filesize().
Reported-by: Milan P. Stanić <mps@arvanta.net> Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Tested-by: Milan P. Stanić <mps@arvanta.net> Reviewed-by: Simon Glass <sjg@chromium.org>
Brian Norris [Fri, 7 Jan 2022 23:15:55 +0000 (15:15 -0800)]
patman: Support absolute and ~user-relative alias files
Python doesn't naturally support tilde (~) as a user-home marker in
paths, but git-config does. So we need to resolve it before continuing.
We also shouldn't blindly join the top-level tree with the aliasesfile
path, because it might be an absolute path.
This resolves warnings like the following:
Warning: Cannot find alias file '/path/to/source/tree/~/.git-email'
Seen when git-config is like:
$ git config sendemail.aliasesfile
~/.git-email
Signed-off-by: Brian Norris <briannorris@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Otavio Salvador <otavio@ossystems.com.br>
Michal Simek [Fri, 7 Jan 2022 15:38:09 +0000 (16:38 +0100)]
dm: core: Switch order of pinctrl and power domain calls
The commit 3ad307784847 ("dm: core: device: enable power domain in probe")
introduced enabling power domain when device is probed.
By checking this sequence in Linux kernel was found that power domain is
handled first followed by pinctrl setting.
This patch is switching this order to follow Linux kernel that power
domains are handled first follow by pinctrl setting.
The issue was found on Xilinx Kria SOM where firmware is blocking setting
up pin configuration/muxes without enabling power domain for the specific
IP first.
Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Simon Glass <sjg@chromium.org>
Tom Rini [Thu, 13 Jan 2022 12:34:27 +0000 (07:34 -0500)]
Merge branch '2022-01-12-assorted-updates'
- Fix binman fake blob support to write outside source directory
- Azure now has stages in the pipeline
- Update to latest focal tag for containers in CI.
- Finish dropping LynxOS
- Add migration message for timer code
Mark Kettenis [Wed, 12 Jan 2022 18:55:17 +0000 (19:55 +0100)]
arm: apple: Use watchdog timer for system reset
Rely on the new watchdog timer driver and the sysreset uclass to
reset the system. This gets rid of hard-coded addresses and
should work on systems based on the new M1 Pro and M1 Max SoCs
as well.
Signed-off-by: Mark Kettenis <kettenis@openbsd.org> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Stefan Roese <sr@denx.de>
Tested-on: Apple M1 Macbook Tested-by: Simon Glass <sjg@chromium.org>
Mark Kettenis [Wed, 12 Jan 2022 18:55:16 +0000 (19:55 +0100)]
arm: dts: apple: Add watchdog timer node
Add a node for the watchdog timer based on the proposed Linux
device tree bindings.
Remove the old reboot node which was a watchdog timert node in
disguise using a preliminary device tree binding.
Signed-off-by: Sven Peter <sven@svenpeter.dev> Signed-off-by: Mark Kettenis <kettenis@openbsd.org> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Stefan Roese <sr@denx.de>
Tested-on: Apple M1 Macbook Tested-by: Simon Glass <sjg@chromium.org>
Mark Kettenis [Wed, 12 Jan 2022 18:55:15 +0000 (19:55 +0100)]
watchdog: Add a driver for the Apple watchdog
This driver supports the watchdog timer found on Apple's M1 SoC.
On systems that use these SoC, the watchdog timer is the primary
way to reboot the system.
Signed-off-by: Mark Kettenis <kettenis@openbsd.org> Reviewed-by: Sven Peter <sven@svenpeter.dev> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Stefan Roese <sr@denx.de>
Tested-on: Apple M1 Macbook Tested-by: Simon Glass <sjg@chromium.org>
Thomas Huth [Sat, 13 Nov 2021 17:13:50 +0000 (18:13 +0100)]
LynxOS is no longer supported
LynxOS needed the do_bootm_lynxkdi() function that got removed in 7e713067ee ("Remove LYNX KDI remainders") - and that function needed
a lynxkdi_boot() function, where the last implementation had been
removed in 98f705c9ce ("powerpc: remove 4xx support") already. Looks
like this OS is definitely not supported anymore, so remove it from
the corresponding lists.
Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Stefan Roese <sr@denx.de>
Simon Glass [Wed, 12 Jan 2022 20:10:36 +0000 (13:10 -0700)]
binman: Write fake blobs to the output directory
At present binman writes fake blobs to the current directory. This is not
very helpful, since the files serve no useful purpose once binman has
finished. They clutter up the source directory and affect future runs,
since the files in the current directory are often used in preference to
those in the board directory.
To avoid these problems, write them to the output directory instead.
Move the file-creation code to the Entry base class, so it can be used by
any entry type that needs it. This is required since some entry types,
such as Entry_blob_ext_list, are not subclasses of Entry_blob.
Tom Rini [Wed, 12 Jan 2022 00:14:28 +0000 (19:14 -0500)]
ci: azure: Update to use stages
Follow what we do in GitLab CI where we break the jobs up in to stages
such that if earlier and often quicker sanity tests fail we don't run
everything else.
Pali Rohár [Fri, 26 Nov 2021 10:42:52 +0000 (11:42 +0100)]
pci: sh7751: Fix access to config space via PCI_CONF1_ADDRESS() macro
sh7751 platform uses standard format of Config Address for PCI
Configuration Mechanism #1.
Commit 72c2f4acd76f ("pci: sh7751: Convert to DM and DT probing") which did
conversion of PCI sh7751 driver to DM, broke access to config space as that
commit somehow swapped device and function bits in config address.
Fix all these issues by using new U-Boot macro PCI_CONF1_ADDRESS() which
calculates Config Address correctly.
Also remove nonsense function sh7751_pci_addr_valid() which was introduced
in commit 72c2f4acd76f ("pci: sh7751: Convert to DM and DT probing")
probably due to workarounded issues with mixing/swapping device and
function bits of config address which probably resulted in non-working
access to some devices. With correct composing of config address there
should not be such issue anymore.
Signed-off-by: Pali Rohár <pali@kernel.org> Fixes: 72c2f4acd76f ("pci: sh7751: Convert to DM and DT probing") Cc: Marek Vasut <marek.vasut+renesas@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
Pali Rohár [Fri, 26 Nov 2021 10:42:41 +0000 (11:42 +0100)]
pci: Add standard PCI Config Address macros
Lot of PCI and PCIe controllers are using standard Config Address for PCI
Configuration Mechanism #1 or its extended version.
So add PCI_CONF1_ADDRESS() and PCI_CONF1_EXT_ADDRESS() macros into U-Boot's
pci.h header file which can be suitable for most PCI and PCIe controller
drivers. Drivers do not have to invent their own macros and can use these
new U-Boot macros.
Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Simon Glass <sjg@chromium.org>
Pali Rohár [Thu, 25 Nov 2021 10:34:37 +0000 (11:34 +0100)]
pci: When disabling pref MEM set all base bits
It is common to set all base address bits to one and all limit address bits
to zero for disabling address forwarding. Forwarding is disabled when base
address is higher than limit address, so this change should not have any
effect.
Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
Pali Rohár [Thu, 25 Nov 2021 10:32:43 +0000 (11:32 +0100)]
pci: Disable I/O forwarding during autoconfiguration if unsupported
If U-Boot does not have any I/O resource for assignment then disable I/O
forwarding in PCI bridge autoconfiguration code. Default initial state of
PCI bridge IO registers is unspecified, therefore they can be in enabled if
U-Boot does not touch them.
Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
Pali Rohár [Thu, 25 Nov 2021 10:30:58 +0000 (11:30 +0100)]
pci: Fix register for determining type of IO base address
Function dm_pciauto_prescan_setup_bridge() configures base address
registers, therefore it should read type of IO from base address registers
(and not from limit address registers).
Note that base and limit address registers should have same type, so this
change is just usage correction and has no functional change on correctly
working hardware.
Fixes: 8e85f36a8fab ("pci: Fix configuring io/memory base and limit registers of PCI bridges") Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Stefan Roese <sr@denx.de>
We want to replace '#ifdef' by 'if (IS_ENABLED(CONFIG_...))' in our code.
Therefore functions should be defined unconditionally even if they are not
implemented.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Acked-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
The initial clock setting should be through sysctl register only,
while the mmc_set_clock() will call mmc_set_ios() introduce other
configurations like bus width, mode, and so on.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Sean Anderson [Tue, 23 Nov 2021 20:03:46 +0000 (15:03 -0500)]
mmc: fsl_esdhc_imx: Replace more #ifdefs by if
This builds on the previous patch by converting yet more preprocessor
macros to C ifs. This is split off so that the changes adapted from
Micheal's patch may be clearly distinguished from the ones I have
authored myself.
MMC_SUPPORTS_TUNING should really get a Kconfig conversion. And DM_GPIO
needs some -ENOSYS stubs when it isn't defined.
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
First, we need the waterlevel setting for PIO mode only. Secondy, both DMA
setup code is identical for both directions, except for the data pointer.
Thus, unify them.
Signed-off-by: Michael Walle <michael@walle.cc> Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
Use the dma_{map,unmap}_single() calls. These will take care of the
flushing and invalidation of caches.
Signed-off-by: Michael Walle <michael@walle.cc> Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
SDMA can only do DMA with 32 bit addresses. This is true for all
architectures (just doesn't apply to 32 bit ones). Simplify the code and
remove unnecessary CONFIG_FSL_LAYERSCAPE.
Also make the error message more concise.
Signed-off-by: Michael Walle <michael@walle.cc> Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
- For DM_MMC, remove getting "bus-width" from device tree.
This has been done in mmc_of_parse().
- For non-DM_MMC, move bus width configuration from fsl_esdhc_init()
to fsl_esdhc_initialize() which is non-DM_MMC specific.
And fix up bus width configuration to support only 1-bit, 4-bit,
or 8-bit. Keep using 8-bit if it's not set because many platforms
use driver without providing max bus width.
- Remove bus_width member from fsl_esdhc_priv structure.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
[ converted if statement to switch ] Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
Voltage validation should be done by CMD8. Current comparison between
mmc_cfg voltages and host voltage capabilities is meaningless.
So drop current comparison and let voltage validation is through CMD8.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
Sean Anderson [Tue, 11 Jan 2022 23:18:52 +0000 (08:18 +0900)]
mmc: fsl_esdhc_imx: make BLK as hard requirement of DM_MMC
U-boot prefers DM_MMC + BLK for MMC. Now eSDHC driver has already
support it, so let's force to use it.
- Drop non-BLK support for DM_MMC introduced by below patch. 66fa035 mmc: fsl_esdhc: fix probe issue without CONFIG_BLK enabled
- Support only DM_MMC + BLK (assuming BLK is always enabled for DM_MMC).
- Use DM_MMC instead of BLK for conditional compile.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by: Sean Anderson <sean.anderson@seco.com> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
The return type of EVP_PKEY_get0_RSA() is const struct rsa_st *.
Our code drops the const qualifier leading to
In file included from tools/lib/rsa/rsa-sign.c:1:
./tools/../lib/rsa/rsa-sign.c: In function ‘rsa_add_verify_data’:
./tools/../lib/rsa/rsa-sign.c:631:13: warning:
assignment discards ‘const’ qualifier from pointer target type
[-Wdiscarded-qualifiers]
631 | rsa = EVP_PKEY_get0_RSA(pkey);
| ^
Add a type conversion.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Tom Rini [Sun, 9 Jan 2022 12:56:31 +0000 (07:56 -0500)]
Merge tag 'u-boot-amlogic-20220107' of https://source.denx.de/u-boot/custodians/u-boot-amlogic into next
- disable CONFIG_NET_RANDOM_ETHADDR when unnecessary on amlogic based configs
- meson64_android: add board specific env settings, in order to support VIM3/L for android
- add changes to support VIM3/L android boot by using meson64_android.h config
Patrick Wildt [Sat, 8 Jan 2022 15:34:17 +0000 (16:34 +0100)]
imx8mq: Generate a single bootable flash.bin again
All i.MX8MQ boards have been converted to binman, which makes it
necessary to flash both flash.bin and u-boot.itb to get a bootable
system. Prior to the conversion, only flash.bin was needed.
Such new requirement breaks existing distro mechanisms to generate the
final binary because the extra u-boot.itb is now required.
Generate a final flash.bin that can be used again as a single bootable
binary to keep the original behavior.
After this change the SPL binary is called spl.bin, which is a more
descriptive name for its purpose, and can still be used standalone (for
example, for secure boot purposes).
Also update imx8mq_evk.rst to remove the u-boot.itb copy step.
This is a cherry-pick of 028abfd9b157 ("imx8mm-evk: Generate a single
bootable flash.bin again") adjusted to apply to i.MX8MQ.
Signed-off-by: Patrick Wildt <patrick@blueri.se> Reviewed-by: Fabio Estevam <festevam@denx.de>
Gary Bisson [Wed, 5 Jan 2022 13:17:53 +0000 (14:17 +0100)]
nitrogen6x: add missing pinctrl to fix mmc
Since commit f7ac30b042d, the pin muxing for mmc was removed from the
board file to be managed by DM_MMC which requires PINCTRL to work. It
made the change for sabrelite but nitrogen configs were forgotten.
Gary Bisson [Thu, 6 Jan 2022 15:02:08 +0000 (16:02 +0100)]
usb: gadget: dwc2_udc_otg: set ep's desc during enable/disable
Fastboot support has been broken on platforms using dwc2 controller
since the gadget gets its max packet size from it.
This patch is the equivalent of 723fd5668ff which fixed the same issue
but for the chipidea controller.
Fixes: 27c9141b111 ("usb: gadget: fastboot: use correct max packet size") Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Tested-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
- A large number of updates for i.MX8 platforms. We update buildman /
binman to be able to fake binaries if needed, for CI, and tell the user
the binary won't work. Update platforms to build again with these
changes.
The binman node is part of the imx8mm-u-boot.dtsi file which
is duplicated in imx8mm-kontron-n801x-s-u-boot.dtsi and causes
a build error. Remove the duplicate.
Fixes: 3cbb31f0e848 ("arm64: dts: imx8mm: use common binman configuration") Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
The binman node is part of the imx8mm-u-boot.dtsi file which
is duplicated in phycore-imx8mm-u-boot.dtsi and causes a build
error. Remove the duplicate.
Fixes: 3cbb31f0e848 ("arm64: dts: imx8mm: use common binman configuration") Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
projects / u-boot.git / log