Tom Rini [Mon, 24 Aug 2020 21:28:18 +0000 (17:28 -0400)]
Merge tag 'efi-2020-10-rc3-3' of https://gitlab.denx.de/u-boot/custodians/u-boot-efi
Pull request for UEFI sub-system for efi-2020-10-rc3 (3)
The following bug fixes are contained in this pull-request:
* ResetSystem() should no hang if not implemented.
* Device paths in Bootxxxx variables should be verified.
* Use ':' as separator for command setenv -e -i instead of ','.
* Correct comments for functions.
* Update UEFI documentation.
ERROR: do not use assignment in if condition
#281: FILE: drivers/xen/pvblock.c:260:
+ if ((err = xenbus_switch_state(XBT_NIL, nodename,
CHECK:COMPARISON_TO_NULL: Comparison to NULL could be written "err"
#52: FILE: drivers/xen/pvblock.c:298:
+ if (err != NULL) {
ERROR: do not use assignment in if condition
#176: FILE: drivers/xen/gnttab.c:103:
+ if ((flags = nflags) & (GTF_reading | GTF_writing)) {
WARNING: Missing or malformed SPDX-License-Identifier tag in line 1
#329: FILE: include/xen/gnttab.h:1:
+/*
WARNING: Misplaced SPDX-License-Identifier tag - use line 1 instead
#330: FILE: include/xen/gnttab.h:2:
+ * SPDX-License-Identifier: GPL-2.0
ERROR: do not use assignment in if condition
#630: FILE: lib/sscanf.c:558:
+ if ((n = inr) < width) {
Signed-off-by: Anastasiia Lukianenko <anastasiia_lukianenko@epam.com> Reviewed-by: Simon Glass <sjg@chromium.org>
Fix defects such as uninitialized variables and untrusted pointer
operations. Most part of the tainted variables and the related defects
actually comes from Linux's macro get_unaligned_le**, extensively used
in SquashFS code. Add sanity checks for those variables.
Signed-off-by: Joao Marcos Costa <joaomarcos.costa@bootlin.com>
AKASHI Takahiro [Wed, 19 Aug 2020 09:07:32 +0000 (18:07 +0900)]
virtio_blk: set log2blksz correctly
'log2blksz' in blk_desc structure must always be initialized, otherwise
it will cause a lot of weird failures in file operations.
For example, fs_set_blk_dev[_with_part]() examines a block device against
every file system with its probe function. In particular, ext4 file
system's ext4_probe() will calls fs_devread() to fetch a super block.
If log2blksz is 0, the actual 'read' size, i.e. block_len >> log2blksz, is
much bigger than a buffer's size, and it can end up with memory corruption.
Improve SquashFS tests architecture. Add 'Compression' class. LZO
algorithm may crash if the file is fragmented, so the fragments are
disabled when testing LZO.
Signed-off-by: Joao Marcos Costa <joaomarcos.costa@bootlin.com>
Add call to lzo's lzo1x_decompress_safe() into sqfs_decompress().
U-Boot's LZO sources may still have some unsolved issues that could make the
decompression crash when dealing with fragmented files, so those should be
avoided. The "-no-fragments" option can be passed to mksquashfs.
Signed-off-by: Joao Marcos Costa <joaomarcos.costa@bootlin.com>
Add call to ZSTD's ZSTD_decompressDCtx(). In this use case, the caller
can upper bound the decompressed size, which will be the SquashFS data
block (or metadata block) size, so there is no need to use streaming
API. Add ZSTD's worskpace to squashfs_ctxt structure.
Signed-off-by: Joao Marcos Costa <joaomarcos.costa@bootlin.com>
fs/squashfs: Add init and clean-up functions to decompression
Add sqfs_decompressor_init() and sqfs_decompressor_cleanup(). These
functions are called respectively in sqfs_probe() and sqfs_close(). For
now, only ZSTD requires an initialization logic. ZSTD support will be
added in a follow-up commit.
Move squashfs_ctxt definition to sqfs_filesystem.h. This structure is
passed to sqfs_decompressor_init() and sqfs_decompressor_cleanup(), so
it can no longer be local to sqfs.c.
Signed-off-by: Joao Marcos Costa <joaomarcos.costa@bootlin.com>
Michal Simek [Thu, 13 Aug 2020 10:43:22 +0000 (12:43 +0200)]
firmware: psci: Do not bind driver if U-Boot runs in EL3
There is no reason to bind psci driver if U-Boot runs in EL3 because
SMC/HVC instructions can't be called. That's why detect this state and
don't let user to crash from prompt by performing reset or poweroff
commands (if enabled).
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Usama Arif [Wed, 12 Aug 2020 15:12:53 +0000 (16:12 +0100)]
board: armltd: Add support for Total Compute platform
Total Compute is based on ARM architecture and has
the following features enabled in u-boot:
- PL011 UART
- PL180 MMC
- NOR Flash
- FIT image with Signature
- AVB
Signed-off-by: Usama Arif <usama.arif@arm.com> Reviewed-by: Tom Rini <trini@konsulko.com>
Usama Arif [Tue, 11 Aug 2020 14:46:03 +0000 (15:46 +0100)]
avb: Make AVB independent of fastboot
AVB only uses CONFIG_FASTBOOT_BUF_ADDR from fastboot for memory.
This memory is used for assigning temporary buffers.
This can be assigned a new variable and used as CONFIG_AVB_BUF_ADDR.
This is to support future boards that support AVB but dont support
USB and therefore dont support FASTBOOT.
Signed-off-by: Usama Arif <usama.arif@arm.com> Cc: Igor Opaniuk <igor.opaniuk@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Igor Opaniuk <igor.opaniuk@gmail.com>
[trini: Change defaults] Signed-off-by: Tom Rini <trini@konsulko.com>
The unit test will reset the system by calling the ResetSystem() runtime
service before or after ExitBootServices() according to the users choice
by setting environment variable efi_selftest to:
* 'reset system' or
* 'reset system runtime'.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
If ResetSystem() is not implemented at runtime, it should return instead
of hanging in an endless loop. This allows the operating system to reset
the system by other means as Linux does. It also matches what EDK II
suggests in comments for functions ResetShutdown() and ResetWarm() in
OvmfPkg/Library/ResetSystemLib/ResetSystemLib.c.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Tom Rini [Mon, 24 Aug 2020 13:06:02 +0000 (09:06 -0400)]
Merge tag 'u-boot-clk-24Aug2020' of https://gitlab.denx.de/u-boot/custodians/u-boot-clk
- Add CCF clocks definitions for iMX6Q enet (ETH)
- Several fixes for CCF framework - the most notable is the one, which
adds get_rate helper to clk-mux.c
- Improvements for clk command - better visibility and alignment.
Dario Binacchi [Wed, 3 Jun 2020 13:36:25 +0000 (15:36 +0200)]
clk: ccf: mux: change the get_rate helper
The previous version of the get_rate helper does not work if the mux
clock parent is changed after the probe. This error has not been
detected because this condition has not been tested. The error occurs
because the set_parent helper does not change the parent of the clock
device but only the clock selection register. Since changing the parent
of a probed device can be tricky, the new version of the get_rate helper
provides the rate of the selected clock and not that of the parent.
Dario Binacchi [Sat, 2 May 2020 15:58:33 +0000 (17:58 +0200)]
clk: ccf: mux: fix access to the sandbox register
The tests developed for the mux clock are run on the sandbox. They don't
call the clk_mux_set_parent routine and therefore they do not detect
this error.
The top-level framework flags are passed as parameter to the common
clock framework (ccf) registration routines without being used.
Checks of the flags setting added by the patch have been added in the
ccf test.
dm: test: clk: add the test for the ccf gated clock
Unlike the other clock types, in the case of the gated clock, a new
driver has been developed which does not use the registering routine
provided by the common clock framework.
The addition of the ecspi0 clock to sandbox therefore allows testing
the ccf gate clock.
Signed-off-by: Dario Binacchi <dariobin@libero.it> Reviewed-by: Simon Glass <sjg@chromium.org>
Lukasz Majewski [Mon, 24 Feb 2020 13:55:26 +0000 (14:55 +0100)]
clk: imx6: Add definition for IMX6QDL_CLK_ENET_REF clock
After commit 673f6597321d ("net: fec_mxc: support i.MX8M with CLK_CCF") all
NXP boards, which are not IMX8 and in the same time are supporting CCF need
to provide PTP clock.
On the i.MX6Q this clock is provided with IMX6QDL_CLK_ENET_REF in the Linux
kernel's CCF.
Code in this change models the simplest case when enet reference clock is
generated from 'osc' clock.
Lukasz Majewski [Mon, 24 Feb 2020 13:55:24 +0000 (14:55 +0100)]
clk: imx6: Add definition for IMX6QDL_CLK_ENET clock
After commit 673f6597321d ("net: fec_mxc: support i.MX8M with CLK_CCF") all
NXP boards, which are not IMX8 and in the same time are supporting CCF
need to provide IMX6QDL_CLK_ENET.
This change defines the missing clock in i.MX6Q's CCF.
Ovidiu Panait [Mon, 17 Aug 2020 18:27:51 +0000 (21:27 +0300)]
sandbox: u-boot.lds: Remove bogus __bss_start symbol
The sections described in the sandbox linker script are inserted before
data section via "INSERT BEFORE .data;". Running readelf -S on sandbox
u-boot binary shows that the bss section is located after the data
section:
This means that the __bss_start assignment in the linker script is bogus,
as the actual bss section start is located elsewhere. Remove this
assignment, as the __bss_start symbol is not used on sandbox anyway.
Ovidiu Panait [Mon, 17 Aug 2020 18:27:50 +0000 (21:27 +0300)]
board_f: Remove dead code from init_func_i2c
Since commit 69153988a6f4 ("i2c: Finish dropping use of CONFIG_I2C_HARD")
init_func_i2c is wrapped only by "#if defined(CONFIG_SYS_I2C)". Because
of this, the second ifdef within becomes pointless:
Simon Glass [Wed, 5 Aug 2020 19:27:46 +0000 (13:27 -0600)]
binman: Move GetEntryModules() to control
When binman is installed its main program is in a different directory
to its modules. This means that __file__ is different and we cannot use
it to obtain the path to etype/ from main.py
To fix this, move the function to the 'control' module, since it is
installed with all the other modules, including the etype/ directory.
Masahiro Yamada [Tue, 4 Aug 2020 05:14:43 +0000 (14:14 +0900)]
treewide: convert devfdt_get_addr_ptr() to dev_read_addr_ptr()
When you enable CONFIG_OF_LIVE, you will end up with a lot of
conversions.
To help this tedious work, this commit converts devfdt_get_addr_ptr()
to dev_read_addr_ptr() by coccinelle. I also removed redundant casts
because dev_read_addr_ptr() returns an opaque pointer.
To generate this commit, I ran the following semantic patch
excluding include/dm/.
Ovidiu Panait [Mon, 3 Aug 2020 19:17:35 +0000 (22:17 +0300)]
dm: core: Fix devfdt_get_addr_ptr return value
According to the description of devfdt_get_addr_ptr, this function should
return NULL on failure, but currently it returns (void *)FDT_ADDR_T_NONE.
Fix this by making devfdt_get_addr_ptr return NULL on failure, as
described in the function comments. Also, update the drivers currently
checking (void *)FDT_ADDR_T_NONE to check for NULL.
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com> Reviewed-by: Simon Glass <sjg@chromium.org>
Add documentation in doc/drivel-model for the bind/unbind command.
Part of this documentation is extracted from original patch commit
message:
commit 49c752c93a78 ("cmd: Add bind/unbind commands to bind a device to a driver from the command line")
Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
As bind-test is now binded at sandbox startup and no more by
test_bind.py, bind-test nodes are not located at the end of
"dm tree" output, but can be located everywhere in the tree, so
bind-test output could either be:
sandbox: dts: Add compatible string for bind-test node
Usage of lists_bind_fdt() in bind command imposes to add
a compatible string for bind-test node.
Others impacts are:
- bind-test node is binded at sandbox start, so no need to bind it
in test_bind_unbind_with_node() test.
- As explained just above, after sandbox start, now a phy exist.
In test/dm/phy.c, it was verified that a third phy didn't exist,
now we must verified that a fourth phy doesn't exist.
Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
Add driver data to existing compatible string "sandbox,phy".
Add an additional compatible string without driver_data
This will verify that bind command parses, finds and passes the
correct driver data to device_bind_with_driver_data() by using
driver_data in the second sandbox_phy_ids table entry.
In sandbox_phy_bind() a check is added to validate driver_data
content.
Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
Initial implementation invokes device_bind_with_driver_data()
with driver_data parameter equal to 0.
For driver with driver data, the bind command can't bind
correctly this driver or even worse causes data abort as shown below:
As example, for debug purpose on STM32MP1 platform, ethernet
(dwc_eth_qos.c) driver needed to be unbinded/binded.
This driver is using driver data:
In the case of the live tree ofnode_read_addr_cells() and
ofnode_read_size_cells() return the #address-cells and #size-cells defined
in the parent node. With the patch the same is done for a non-live tree.
The only consumer of these functions is currently the CFI flash driver.
This patch fixes the incorrect parsing of the device tree leading to
'saveenv' failing on qemu_arm64_defconfig.
For testing qemu-system-aarch64 has to be called with
Michal Simek [Thu, 23 Jul 2020 07:24:06 +0000 (09:24 +0200)]
clk: versal: Move pm_query_id out of clock driver
There is no reason to have firmware specific structure in clock driver.
Move it to generic location and also initialize enum values which is based
on https://lore.kernel.org/linux-arm-kernel/20200318125003.GA2727094@kroah.com/
recommended way to go to make sure that values guaranteed by compiler.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Faiz Abbas [Thu, 23 Jul 2020 04:12:19 +0000 (09:42 +0530)]
mmc: sdhci: Enable high speed conditional on the corresponding bit
The capabilities register has a field to indicate whether the host
supports high speed mode or not. Add high speed host_caps based on
this bit instead of enabling it by default.
Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Reviewed-by: Michal Simek <michal.simek@xilnx.com> Tested-by: Michal Simek <michal.simek@xilnx.com>
(zcu104 with sdhci-caps-mask = <0 0x200000>;)
Linux kernel for arm32 requires dtb and initrd to be placed in low memory
to work properly. This requirement is described in chapter 4b) and 5) in
Linux documentation (Documentation/arm/booting.rst).
There is an issue on arm32 with 2GB of memory that bootm_size is bigger
than Linux lowmem (for example with VMSPLIT_3G). That's why limit bootm
size on these systems not to be above 768MB.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Michal Simek [Wed, 12 Aug 2020 10:04:50 +0000 (12:04 +0200)]
xilinx: common: Get rid of fdt_high variable
There is no need to setup this variable if bootm_low and bootm_size
variable are properly setup. If fdt_high variable is missing U-Boot is
asking LMB to return free memory which is not used.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Michal Simek [Mon, 3 Aug 2020 10:59:28 +0000 (12:59 +0200)]
xilinx: Change logic around zynq_board_read_rom_ethaddr()
There is no reason to build private function when
CONFIG_ZYNQ_GEM_I2C_MAC_OFFSET is not defined. There is already weak
function which handles default case properly.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Ibai Erkiaga [Tue, 4 Aug 2020 22:17:32 +0000 (23:17 +0100)]
xilinx: zynqmp: fix incorrect map not align with IPI HW
Current IPI module register description is not align with IPI HW. The
registers with the wrong offset are not used so it does not cause real
issues. This patch aligns the register description.
Additionally comments added to explain why recv function does not check
any flag prior copying rx data.
Fixes: 660b0c77d816 ("mailbox: zynqmp: ipi mailbox driver") Signed-off-by: Ibai Erkiaga <ibai.erkiaga-elorza@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Ibai Erkiaga [Tue, 4 Aug 2020 22:17:30 +0000 (23:17 +0100)]
xilinx: zynqmp: remove chip_id function
Remove chip_id function and integrate the firmware call in the
zynqmp_get_silicon_idcode_name function. The change avoids querying the
firmware twice and makes the code bit more clear.
Signed-off-by: Ibai Erkiaga <ibai.erkiaga-elorza@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Ibai Erkiaga [Tue, 4 Aug 2020 22:17:28 +0000 (23:17 +0100)]
xilinx: zynqmp: get chip ID using firmware driver
Current implementation for getting chip ID uses either raw access on EL3
or a SMC call to get the silicon information. Following change
simplifies the code using always the firmware driver.
Signed-off-by: Ibai Erkiaga <ibai.erkiaga-elorza@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Ibai Erkiaga [Tue, 4 Aug 2020 22:17:27 +0000 (23:17 +0100)]
xilinx: zynqmp: merge firmware calls for EL2 and EL3
This patch merges ZynqMP firmware calls under xilinx_pm_request in order
to make trainsparent the EL. Calls at EL3 are send through IPI messages
and EL2 through SMC calls.
The EL2 call uses fixed payload and arg size as the EL3 call. The
firmware is capable to handle PMUFW_PAYLOAD_ARG_CNT bytes but the
firmware API is limited by the SMC call size.
Signed-off-by: Ibai Erkiaga <ibai.erkiaga-elorza@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Removes duplicated definition of PAYLOAD_ARG_CNT and define it in the
firmware driver. Additionally fixes payload buffer declarations without
macro usage
Signed-off-by: Ibai Erkiaga <ibai.erkiaga-elorza@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
projects / u-boot.git / log