Tom Rini [Fri, 16 Aug 2024 03:49:04 +0000 (21:49 -0600)]
test/boot: Make BOOTSTD tests depend on UT_BOOTSTD
While we have a symbol for controlling if we will be testing BOOTSTD or
not, and it depends on SANDBOX, we do not control the building of
test/boot/ content correctly. Guard the current bootstd tests with
a check for UT_BOOTSTD and leave the measurement test available.
Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
Simon Glass [Thu, 22 Aug 2024 13:55:02 +0000 (07:55 -0600)]
spl: Create a function to init spl_load_info
Rather than having every caller set this up individually, create a
common init function. This allows new fields to be added without the
risk of them being left uninited.
Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Michael Trimarchi <michael@amarulasolutions.com>
Simon Glass [Thu, 22 Aug 2024 13:55:00 +0000 (07:55 -0600)]
spl: mmc: Try to clean up raw-mode options
Make the raw-mode options depend on SPL_SYS_MMCSD_RAW_MODE in a more
direct way. This makes it easier to understand the options with
'make menuconfig'.
There are three different ways of specifying the offset:
- sector offset
- partition number
- partition type
So make these a choice, so it is more obvious what is going on.
Update existing boards to enable SPL_SYS_MMCSD_RAW_MODE where needed.
Reviewed-by: Sean Anderson <seanga2@gmail.com> Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de> Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Thu, 22 Aug 2024 13:54:59 +0000 (07:54 -0600)]
spl: mmc: Adjust args of spl_mmc_find_device()
At present spl_mmc_load() is the only caller of this function, passing
it a boot_device, an index into the available MMC devices. Pass the
device number instead, since it is known by the caller and simplifies
the code.
Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Sean Anderson <seanga2@gmail.com> Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Simon Glass [Thu, 22 Aug 2024 13:54:58 +0000 (07:54 -0600)]
spl: mmc: Handle error codes consistently
Use 'ret' as the return code, since it may not be an error and this is
the common name in U-Boot. Make sure to return the error code when
given, rather than transforming it into -1 (-EPERM).
Simon Glass [Thu, 22 Aug 2024 13:54:56 +0000 (07:54 -0600)]
log: Avoid including function names by default
Unless function names are requested, the logging system should not
compile these into the code. Adjust the macros to handle this.
This means that turning on function names at runtime won't work unless
CONFIG_LOGF_FUNC is enabled. We could perhaps split this into a
separate option if that is a problem.
Enable CONFIG_LOGF_FUNC logging for sandbox since the tests expect the
function names to be included. Fix up the pinmux test which checks a
logging statement.
Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Simon Glass [Thu, 22 Aug 2024 13:54:51 +0000 (07:54 -0600)]
spl: Correct use of CMD_BOOTI and CMD_BOOTZ
These should have a CONFIG_ prefix. Add it.
Signed-off-by: Simon Glass <sjg@chromium.org> Fixes: 7a0d88076b9 ("Add in the ability to load and boot an uncompr...") Reviewed-by: Sean Anderson <seanga2@gmail.com> Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
- Add BOOTAUX support for apalis and colibri imx8 boards.
- Cleanup tqma6 board by removing unneeded board code.
- Add support for booting from ecspi3 via bmode command on imx6.
- Add a script to ease updating flash.bin on imx8mm phytec board.
- Enable cat and xxd commands on Data Modul i.MX8M Mini/Plus eDM SBC and
use USB SDPS as fallback option.
- Fix critical temperature on imx9.
- Add Cortex M and bootaux support for phycore-imx8mp.
Marek Vasut [Wed, 21 Aug 2024 21:01:16 +0000 (23:01 +0200)]
ARM: imx: Use USB SDPS as fallback option on Data Modul i.MX8M Plus eDM SBC
The Data Modul i.MX8M Plus eDM SBC does have USB gadget capable port
accessible via USB A-A cable plugged into the bottom USB 3.0 port.
Use USB SDPS as the fallback boot device, so USB SDPS loading can
be performed using e.g. uuu tool.
- Migrate Atmel usb gadget to DM_USB_GADGET
- More small cleanups/improvements on the atmel UDC driver
- Change udc uclass name from "usb" -> "usb_gadget"
Tom Rini [Mon, 19 Aug 2024 22:15:47 +0000 (16:15 -0600)]
Merge patch series "clk: mediatek: mt7622: clk migration for OF_UPSTREAM"
Christian Marangi <ansuelsmth@gmail.com> says:
These are all the required patches to migrate clk and correctly support
OF_UPSTREAM. This will align the clk index to upstream to support the same
clk implementation with downstream and upstream DTS.
clk: mediatek: mt7622: add missing A1/2SYS clock ID
Add missing A1/2SYS clock ID just as a reference for OF_UPSTREAM
support. These clocks are not defined and are not usable as current
clock topckgen OPs doesn't support gates.
These special node won't ever be used by uboot hence just add them for
reference.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Tested-by: Frank Wunderlich <frank-w@public-files.de>
Add missing PERIBUS_SEL clock to match upstream linux clk ID order. Also
convert pericfg to mux + gate implementation as now we have also mux on
top of gates.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Add missing clock PERI_UART4_PD for peri clock gates. This is needed to
match upstream linux clk ID in preparation for OF_UPSTREAM.
Also convert infracfg to mux + gate implementation as now we have mux on
top of gates.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Tom Rini [Mon, 19 Aug 2024 22:15:13 +0000 (16:15 -0600)]
Merge patch series "clk: mediatek: mt7986: clk migration for OF_UPSTREAM"
Christian Marangi <ansuelsmth@gmail.com> says:
These are all the required patches to migrate clk and correctly support
OF_UPSTREAM. This will align the clk index to upstream to support the same
clk implementation with downstream and upstream DTS.
clk: mediatek: mt7986: comment out CK_TOP_A_TUNER as not used
Comment out CK_TOP_A_TUNER as not used and not defined in upstream
kernel linux. This is to permit support of OF_UPSTREAM and have a 1:1
match with upstream linux clock ID.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
clk: mediatek: mt7986: drop 1/1 spurious factor for topckgen
Now that we can have advanced parent handling for mux, we can drop
spurious topckgen 1/1 factor. This is in preparation to make the clk
ID match the ID in upstream include for mt7986.
Drop the factor entry from mt7986-clk.h and reference to them in
mt7981.dtsi. Muxes and gates are updated to reference the apmixed clk
following how it's done in upstream kernel linux. Add relevant clk type
flag in clk_tree for apmixed.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reorder TOPCKGEN factor ID to put TOP_FACTOR first and then PLL. This is
to match how it's done in upstream kernel linux and in preparation for
OF_UPSTREAM support.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
clk: mediatek: mt7986: rename TOPCKGEN factor clock to upstream naming
Rename TOPCKGEN factor clock to upstream neaming.
Upstream kernel linux reference the factor clock for apmixedpll with the
"pll" suffix. Align the naming to the upstream naming format in
preparation for OF_UPSTREAM support.
Also rename rtc clock to drop the CB_ as upstream doesn't have that.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
clk: mediatek: mt7986: drop 1/1 infracfg spurious factor
Now that we can have advanced parent handling for mux, we can drop
spurious infracfg 1/1 factor. This is in preparation to make the clk
ID match the ID in upstream include for mt7986.
Drop the factor entry from mt7986-clk.h and reference to them in
mt7981.dtsi. Muxes and gates are updated to reference the topckgen clk
following how it's done in upstream kernel linux. Add relevant clk type
flag in clk_tree for infracfg and topckgen.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
clk: mediatek: mt7986: fix wrong parent for INFRA_ADC_26M_CK
Fix wrong parent for INFRA_ADC_26M_CK as should be INFRA_ADC_FRC_CK
instead of INFRA_CK_F26M. This is to match implementation on upstream
kernel linux.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
clk: mediatek: mt7986: rename 66M_MCK to SYSAXI_D2
Upstream kernel linux clock include use SYSAXI_D2 instead of 66M_MCK.
Rename this clock to the upstream kernel in preparation for support of
OF_UPSTREAM.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
clk: mediatek: mt7986: rename CB_CKSQ_40M to TOP_XTAL
Upstream kernel linux clock include use TOP_XTAL instead of CB_CKSQ_40M.
Rename this clock to the upstream kernel in preparation for support of
OF_UPSTREAM.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Tom Rini [Mon, 19 Aug 2024 22:14:29 +0000 (16:14 -0600)]
Merge patch series "clk: mediatek: mt7988: clk migration for OF_UPSTREAM"
Christian Marangi <ansuelsmth@gmail.com> says:
These are all the required patches to migrate clk and correctly support
OF_UPSTREAM. This will align the clk index to upstream to support the same
clk implementation with downstream and upstream DTS.
clk: mediatek: mt7988: comment out infracfg clk not defined
Comment out infracfg clk not defined in upstream kernel linux clock ID
include. These clock are not used and can be safely commented. Keep them
just to have a reference of their existence.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
clk: mediatek: mt7988: drop 1/1 spurious factor for topckgen
Now that we can have advanced parent handling for mux, we can drop
spurious topckgen 1/1 factor. This is in preparation to make the clk
ID match the ID in upstream include for mt7988.
Drop the factor entry from mt7988-clk.h and reference to them in
mt7988.dtsi. Muxes and gates are updated to reference the apmixed clk
following how it's done in upstream kernel linux. Add relevant clk type
flag in clk_tree for apmixed and topckgen.
Also move TOP_XTAL to the fixed clock table following how it's done in
upstream linux kernel.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reorder TOPCKGEN factor ID to put TOP_FACTOR first and then PLL. This is
to match how it's done in upstream kernel linux and in preparation for
OF_UPSTREAM support.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
clk: mediatek: mt7988: rename TOPCKGEN factor clock to upstream naming
Rename TOPCKGEN factor clock to upstream neaming.
Upstream kernel linux reference the factor clock for apmixedpll with the
"pll" suffix. Align the naming to the upstream naming format in
preparation for OF_UPSTREAM support.
Also rename rtc clock to drop the CB_ as upstream doesn't have that.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
clk: mediatek: mt7988: drop 1/1 infracfg spurious factor
Now that we can have advanced parent handling for mux, we can drop
spurious infracfg 1/1 factor. This is in preparation to make the clk
ID match the ID in upstream include for mt7988.
Drop the factor entry from mt7988-clk.h and reference to them in
mt7988.dtsi. Muxes and gates are updated to reference the topckgen clk
following how it's done in upstream kernel linux.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
clk: mediatek: mt7988: fix wrong parent for INFRA_PCIE_PERI_26M_CK_P2
Fix wrong parent for INFRA_PCIE_PERI_26M_CK_P2 as should be
INFRA_PCIE_PERI_26M_CK_P3 instead of INFRA_F26M_O0. This is to match
implementation on upstream kernel linux.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
clk: mediatek: mt7988: move INFRA_PCIE_PERI_26M_CK_Px clock at top
Move INFRA_PCIE_PERI_26M_CK_Px clock at top of the infracfg gates
in preparation for support of OF_UPSTREAM to have a 1:1 match with
upstream clock ID.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
clk: mediatek: mt7988: rename TOP_CK_NPU_SEL_CM_TOPS_SEL to TOP_NPU_SEL
Upstream kernel linux clock include use TOP_NPU_SEL instead of
TOP_CK_NPU_SEL_CM_TOPS_SEL.
Rename this clock to the upstream kernel in preparation for support of
OF_UPSTREAM.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
clk: mediatek: mt7988: rename TOP_DA_SELM_XTAL_SEL to TOP_DA_SEL
Upstream kernel linux clock include use TOP_DA_SEL instead of
TOP_DA_SELM_XTAL_SEL.
Rename this clock to the upstream kernel in preparation for support of
OF_UPSTREAM.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
clk: mediatek: mt7988: rename CB_CKSQ_40M to TOP_XTAL
Upstream kernel linux clock include use TOP_XTAL instead of CB_CKSQ_40M.
Rename this clock to the upstream kernel in preparation for support of
OF_UPSTREAM.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Tom Rini [Mon, 19 Aug 2024 22:13:51 +0000 (16:13 -0600)]
Merge patch series "clk: mediatek: mt7981: clk migration for OF_UPSTREAM"
Christian Marangi <ansuelsmth@gmail.com> says:
These are all the required patches to migrate clk and correctly support
OF_UPSTREAM. This will align the clk index to upstream to support the same
clk implementation with downstream and upstream DTS.
Add and fix support for pwm3 clock. In the pwm DTSI node we were
actually using PWM2 clock for PWM3. Now that we have correct ID also add
the missing entry of gate and mux to support PWM3 clock.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Now that we can have advanced parent handling for mux, we can drop
spurious infracfg 1/1 factor. This is in preparation to make the clk
ID match the ID in upstream include for mt7981.
Drop the factor entry from mt7981-clk.h and reference to them in
mt7981.dtsi. Muxes and gates are updated to reference the topckgen clk
following how it's done in upstream kernel linux. Add relevant clk type
flag in clk_tree for infracfg and topckgen.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Implement missing sgmii0/1 clock and update the compatible the DTS to
match upstream kernel linux and in preparation for OF_UPSTREAM support
since the ethernet node define these additional clocks.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
projects / u-boot.git / log