Hai Pham [Mon, 16 Aug 2021 02:26:36 +0000 (09:26 +0700)]
mtd: spi: renesas: Extract strobe delay setting code into separate function
Move strobe delay setting code into extra function and reflect the latest
setting in datasheet (R-Car Gen3 v2.20, R-Car V3U v0.50).
i.e. STRTIM[2:0] should be set to 110 (RCar M3-W) or 111 (Other products)
This is also a preparation for new R-Car Gen4 SoC which has 4-bits STRTIM
Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Signed-off-by: Hai Pham <hai.pham.ud@renesas.com> Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> # Fix for RZ/A1
Tom Rini [Sat, 10 Jun 2023 00:35:02 +0000 (20:35 -0400)]
Merge branch '2023-06-09-fwu-updates' into next
Two sets of FWU updates from Jassi Brar. First:
The patchset reduces ~400 lines of code, while keeping the functionality same and making
meta-data operations much faster (by using cached structures).
Issue:
meta-data copies (primary and secondary) are being handled by the
backend/storage layer instead of the common core in fwu.c (as also noted by
Ilias) that is, gpt_blk.c manages meta-data and similarly raw_mtd.c will have
to do the same when it arrives. The code could by make smaller, cleaner and
optimised.
Basic idea:
Introduce .read_mdata() and .write_mdata() in fwu_mdata_ops that simply
read/write meta-data copy. The core code takes care of integrity and redundancy
of the meta-data, as a result we can get rid of every other callback
.get_mdata() .update_mdata() .get_mdata_part_num() .read_mdata_partition()
.write_mdata_partition() and the corresponding wrapper functions thereby making
the code 100s of LOC smaller.
Get rid of fwu_check_mdata_validity() and fwu_mdata_check() which expected
underlying layer to manage and verify mdata copies.
Implement fwu_get_verified_mdata(struct fwu_mdata *mdata) public function that
reads, verifies and, if needed, fixes the meta-data copies.
Verified copy of meta-data is now cached as 'g_mdata' in fwu.c, which avoids
multiple low-level expensive read and parse calls.
gpt meta-data partition numbers are now cached in gpt_blk.c, so that we don't
have to do expensive part_get_info() and uid ops.
And second:
Introduce support for mtd backed storage for FWU feature and enable it on
Synquacer platform based DeveloperBox.
Jassi Brar [Wed, 31 May 2023 05:30:06 +0000 (00:30 -0500)]
fwu: provide default fwu_plat_get_bootidx
Just like fwu_plat_get_update_index, provide a default/weak
implementation of fwu_plat_get_bootidx. So that most platforms
wouldn't have to re-implement the likely case.
Jassi Brar [Wed, 31 May 2023 05:29:56 +0000 (00:29 -0500)]
fwu: DeveloperBox: add support for FWU
Add code to support FWU_MULTI_BANK_UPDATE.
The platform does not have gpt-partition storage for
Banks and MetaData, rather it used SPI-NOR backed
mtd regions for the purpose.
Masami Hiramatsu [Wed, 31 May 2023 05:29:14 +0000 (00:29 -0500)]
FWU: Add FWU metadata access driver for MTD storage regions
In the FWU Multi Bank Update feature, the information about the
updatable images is stored as part of the metadata, on a separate
region. Add a driver for reading from and writing to the metadata
when the updatable images and the metadata are stored on a raw
MTD region.
The code is divided into core under drivers/fwu-mdata/ and some helper
functions clubbed together under lib/fwu_updates/
Jassi Brar [Mon, 6 Mar 2023 23:18:58 +0000 (17:18 -0600)]
test: dm: fwu: fix for the updated api
fwu_get_mdata() no more requires 'dev' argument and
fwu_check_mdata_validity() has been rendered useless and dropped.
Fix the test cases to work with aforementioned changes.
Jassi Brar [Mon, 6 Mar 2023 23:18:41 +0000 (17:18 -0600)]
fwu: meta-data: switch to management by common code
The common code can now read, verify and fix meta-data copies
while exposing one consistent structure to users.
Only the .read_mdata() and .write_mdata() callbacks of fwu_mdata_ops
are needed. Get rid of .get_mdata() .update_mdata() .get_mdata_part_num()
.read_mdata_partition() and .write_mdata_partition() and also the
corresponding wrapper functions.
Jassi Brar [Mon, 6 Mar 2023 23:18:28 +0000 (17:18 -0600)]
fwu: move meta-data management in core
Instead of each i/f having to implement their own meta-data verification
and storage, move the logic in common code. This simplifies the i/f code
much simpler and compact.
Jassi Brar [Mon, 6 Mar 2023 23:18:14 +0000 (17:18 -0600)]
dt/bindings: fwu-mdata-mtd: drop changes outside FWU
Any requirement of FWU should not require changes to bindings
of other subsystems. For example, for mtd-backed storage we
can do without requiring 'fixed-partitions' children to also
carry 'uuid', a property which is non-standard and not in the
bindings.
There exists no code yet, so we can change the fwu-mtd bindings
to contain all properties within the fwu-mdata node.
Import R8A77980 V3HSK DTs from Linux 6.1.31,
commit d2869ace6eeb ("Linux 6.1.31").
Extracted from a larger patch by Valentine Barshak.
Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Signed-off-by: Valentine Barshak <valentine.barshak@cogentembedded.com> Signed-off-by: Hai Pham <hai.pham.ud@renesas.com> Signed-off-by: Tam Nguyen <tam.nguyen.xa@renesas.com> Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> # Sync with 6.1.31
Import R8A77970 V3MSK DTs from Linux 6.1.31,
commit d2869ace6eeb ("Linux 6.1.31").
Extracted from a larger patch by Valentine Barshak.
Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Signed-off-by: Valentine Barshak <valentine.barshak@cogentembedded.com> Signed-off-by: Hai Pham <hai.pham.ud@renesas.com> Signed-off-by: Tam Nguyen <tam.nguyen.xa@renesas.com> Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> # Sync with 6.1.31
The reset_cpu() implementation is basically the same across Gen3
SoCs and identical across Gen4 SoCs. Introduce weak default for
reset_cpu(), so that it does not have to be duplicated in every
board file again.
There is a slight difference for CA53 only systems, like E3 and D3,
which now check MIDR for CPU ID first just like the other systems,
but this is OK since the MIDR always returns CA53 core type and the
correct reset register is written.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Masahisa Kojima [Wed, 7 Jun 2023 05:41:59 +0000 (14:41 +0900)]
test: efi_capsule: refactor efi_capsule test
Current efi capsule python tests have much code duplication.
This commit creates the common function
in test/py/tests/test_efi_capsule/capsule_common.py,
aim to reduce the code size and improve maintainability.
Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org> Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Masahisa Kojima [Wed, 7 Jun 2023 05:41:56 +0000 (14:41 +0900)]
mkeficapsule: add FMP Payload Header
Current mkeficapsule tool does not provide firmware
version management. EDK II reference implementation inserts
the FMP Payload Header right before the payload.
It coutains the fw_version and lowest supported version.
This commit adds a new parameters required to generate
the FMP Payload Header for mkeficapsule tool.
'-v' indicates the firmware version.
When mkeficapsule tool is invoked without '-v' option,
FMP Payload Header is not inserted, the behavior is same as
current implementation.
The lowest supported version included in the FMP Payload Header
is not used, the value stored in the device tree is used instead.
Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org> Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Masahisa Kojima [Wed, 7 Jun 2023 05:41:55 +0000 (14:41 +0900)]
efi_loader: check lowest supported version
The FMP Payload Header which EDK II capsule generation scripts
insert has a firmware version.
This commit reads the lowest supported version stored in the
device tree, then check if the firmware version in FMP payload header
of the ongoing capsule is equal or greater than the
lowest supported version. If the firmware version is lower than
lowest supported version, capsule update will not be performed.
Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org>
Masahisa Kojima [Wed, 7 Jun 2023 05:41:53 +0000 (14:41 +0900)]
efi_loader: versioning support in GetImageInfo
Current FMP->GetImageInfo() always return 0 for the firmware
version, user can not identify which firmware version is currently
running through the EFI interface.
This commit reads the "FmpStateXXXX" EFI variable, then fills the
firmware version in FMP->GetImageInfo().
Now FMP->GetImageInfo() and ESRT have the meaningful version number.
Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org> Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Masahisa Kojima [Wed, 7 Jun 2023 05:41:52 +0000 (14:41 +0900)]
efi_loader: store firmware version into FmpState variable
Firmware version management is not implemented in the current
FMP protocol.
EDK II reference implementation capsule generation script inserts
the FMP Payload Header right before the payload, FMP Payload Header
contains the firmware version and lowest supported version.
This commit utilizes the FMP Payload Header, reads the header and
stores the firmware version into "FmpStateXXXX" EFI non-volatile variable.
XXXX indicates the image index, since FMP protocol handles multiple
image indexes.
Note that lowest supported version included in the FMP Payload Header
is not used. If the platform uses file-based EFI variable storage,
it can be tampered. The file-based EFI variable storage is not the
right place to store the lowest supported version for anti-rollback
protection.
This change is compatible with the existing FMP implementation.
This change does not mandate the FMP Payload Header.
If no FMP Payload Header is found in the capsule file, fw_version,
lowest supported version, last attempt version and last attempt
status is 0 and this is the same behavior as existing FMP
implementation.
Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org>
Masahisa Kojima [Wed, 7 Jun 2023 05:41:51 +0000 (14:41 +0900)]
efi_loader: add the number of image entries in efi_capsule_update_info
The number of image array entries global variable is required
to support EFI capsule update. This information is exposed as a
num_image_type_guids variable, but this information
should be included in the efi_capsule_update_info structure.
This commit adds the num_images member in the
efi_capsule_update_info structure. All board files supporting
EFI capsule update are updated.
Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org> Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Nishanth Menon [Tue, 16 May 2023 23:06:21 +0000 (18:06 -0500)]
arm: mach-k3: am625_init: Add Erratum WA for RTC startup
In the first silicon revision of the am62x family of SoCs, the hardware
wakeup event cannot be used if software is unable to unlock the RTC
device within one second after boot. To work around this limitation
unlock RTC as soon as possible in the boot flow to maximize our chance
of linux being able to use this device.
Add the erratum i2327 workaround to initialize the RTC.
Signed-off-by: Nishanth Menon <nm@ti.com>
[bb@ti.com: rebased from 2021.01 and expanded commit and code messages] Signed-off-by: Bryan Brattlof <bb@ti.com>
arm: mach-k3: arm64-mmu: do not map ATF and OPTEE regions in A53 MMU
ATF and OPTEE regions may be firewalled from non-secure entities.
If we still map them for non-secure A53, speculative access may happen,
which will not cause any faults and related error response will be ignored,
but it's better to not to map those regions for non-secure A53 as there
will be no actual access at all.
Create separate table as ATF region is at different locations for am64
and am62/am62a.
Udit Kumar [Thu, 11 May 2023 09:17:50 +0000 (14:47 +0530)]
arch: arm: mach-k3: j721e: add support for UDA FS
When selecting UDA partition for booting. MMC read
mode was selected as RAW.
Due to growing/changing size of u-boot and tispl
images.
It will be better change to FS in case of UDA FS instead of
adjusting offsets with new change.
Udit Kumar [Thu, 11 May 2023 09:17:49 +0000 (14:47 +0530)]
configs: j7200: correct mmc offset
This patch corrects the MMC raw mode sector offset.
Current allocated size for tiboot3 is 1MB and 2MB for tispl.
Without this correct offset eMMC boot will fail.
Fixes: f8c1e893c82 (configs: j7200_evm_a72: Add Initial suppot) Fixes: 02dff65efe7 (configs: j7200_evm_r5: Add initial support) Fixes: 360c7f46f39 (configs: Add configs for J7200 High Security EVM)
Way to test with eMMC boot from boot0/1 partition
Boot with SD card, copy images to eMMC boot0 or boot1 partition
The "Message not acknowledged" error message is missing a line feed,
leading to the console log getting garbled and joined together with
whatever the next output is in case this error happens:
"ti_sci system-controller@44043000: Message not acknowledgedAuthentication failed!"
Fix ths by adding the missing linefeed character.
Signed-off-by: Andreas Dannenberg <dannenberg@ti.com> Acked-by: Andrew Davis <afd@ti.com>
arm: mach-k3: common: reorder removal of firewalls
K3 devices have some firewalls set up by ROM that we usually remove so
that the development is easy in HS devices.
While removing the firewalls disabling a background region before
disabling the foreground regions keeps the firewall in a state where all
the transactions will be blacklisted until all the regions are disabled.
This causes a race for some other entity trying to access that memory
region before all the firewalls are disabled and causes an exception.
Since there is no guarantee on where the background regions lie based on
ROM configurations or no guarantee if the background regions will allow
all transactions across the memory spaces, iterate the loop twice removing
the foregrounds first and then backgrounds.
Leo Yan [Thu, 4 May 2023 07:54:58 +0000 (15:54 +0800)]
arm64: Remove duplicated symbols
When build U-boot with clang with using commands:
$ make HOSTCC=clang xenguest_arm64_defconfig
$ make HOSTCC=clang CROSS_COMPILE=aarch64-linux-gnu- \
CC="clang -target aarch64-linux-gnueabi" -j8
The compiler reports error:
/tmp/start-acdf31.s:330:1: error: symbol '_start' is already defined
_start:
^
Because the symbol '_start' has been defined twice, one is defined in
arch/arm/cpu/armv8/start.S, another is defined in the header
boot0-linux-kernel-header.h.
To fix building failure, this patch removes the symbol '_start' from
boot0-linux-kernel-header.h.
Sam Edwards [Thu, 18 May 2023 19:47:07 +0000 (13:47 -0600)]
mmc: fix improper use of memset
Buffers created through DEFINE_(CACHE_)ALIGN_BUFFER are actually
pointers to the real underlying buffer. Using sizeof(...) is
not appropriate in this case.
Signed-off-by: Sam Edwards <CFSworks@gmail.com> Reviewed-by: Peng Fan <peng.fan@nxp.com>
Ravi Gunasekaran [Thu, 18 May 2023 06:36:23 +0000 (12:06 +0530)]
common: dfu: Remove leading space characters
As per [1], dfu_alt_info is mentioned to be as semicolon separated
string of information on each alternate and the parsing logic in
the dfu.c is based on this.
Typically, the dfu_alt_info_* is defined in .h files as preprocessor
macros with 'alt' info separated by semicolon.
But when dfu_alt_info_* is added in the environment files(.env)
the script at "scripts/env2string.awk" converts a newline to space.
Thus adding a space character after semicolon. This results in
incorrect parsing in dfu.c which is based on the information that
'alt' info are only semicolon separated.
One option is to add dfu_alt_info_* variable in .env in single line.
But there is possiblity for it to exceed the line length limit.
So update the parsing logic to remove leading space characters
before adding to the dfu list.
Rasmus Villemoes [Tue, 16 May 2023 09:17:56 +0000 (11:17 +0200)]
scripts/Makefile.lib: change spelling of $(srctree)/arch/$(ARCH)/dts in dtc_cpp_flags
Currently, all in-tree .dts files (apart from some under test/ and
tools/), reside in arch/$ARCH/dts. However, in the linux kernel tree,
dts files for arm64 boards, and probably in the not too distant
future [1], arm boards as well, live in subdirectories of that.
For private forks, using a vendor or project subdirectory is also more
convenient to clearly separate private code from upstream - in the
same way that code under board/ is also split and easy to maintain.
In order to prepare for us to follow suit and do the splitting of the
in-tree .dts files, and to make life a little easier for private forks
that already place dts files not directly in arch/$ARCH/dts, change
the $(srctree)/arch/$(ARCH)/dts path to instead refer to the directory of
the .dts file being compiled. This should be a no-op for all existing
cases.
Sam Edwards [Fri, 12 May 2023 22:31:05 +0000 (16:31 -0600)]
arm: set alignment properly for asm funcs
ARM requires a 4-byte alignment on all ARM code (though this
requirement is relaxed to 2-byte for some THUMB code) and we
should be explicit about that here.
GAS has its own fix for this[1] that forces proper alignment
on any section containing assembled instructions, but this is
not universal: Clang's and other gaslike assemblers lack this
implicit alignment. Whether or not this is considered a bug in
those assemblers, it is better to ask directly for what we want.
Function b_getch() retrieves a character from the input stream. This
character may be > 0x7f. If type char is signed, static_get() will
return a negative number and in parse_stream() we will use that
negative number as an index for array map[] resulting in a buffer
overflow.
Reported-by: Harry Lockyer <harry_lockyer@tutanota.com> Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Reviewed-by: Simon Glass <sjg@chromium.org>
Samuel Holland [Mon, 20 Feb 2023 06:14:58 +0000 (00:14 -0600)]
fastboot: Only call the bootm command if it is enabled
This fixes an error with trying to link against do_bootm() when
CONFIG_CMD_BOOTM is disabled.
Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Tom Rini [Wed, 31 May 2023 20:30:16 +0000 (16:30 -0400)]
Merge branch '2023-05-31-cleanup-unaligned-access-macros' into next
To quote the author:
There are two versions of get/set_unaligned, get_unaligned_be64,
put_unaligned_le64 etc in U-Boot causing confusion (and bugs).
In this patch-set, I'm trying to fix that with a single unified version of
the access macros to be used across all archs. This work is inspired by
similar changes in this Linux kernel by Arnd Bergman,
https://lore.kernel.org/lkml/20210514100106.3404011-1-arnd@kernel.org/
Jens Wiklander [Mon, 22 May 2023 12:22:36 +0000 (14:22 +0200)]
fs/btrfs: use asm/unaligned.h
Use asm/unaligned.h instead of linux/unaligned/access_ok.h for unaligned
access. This is needed on architectures that doesn't handle unaligned
accesses directly.
Jens Wiklander [Mon, 22 May 2023 12:22:35 +0000 (14:22 +0200)]
powerpc: use asm-generic/unaligned.h
Powerpc configurations are apparently able to do unaligned accesses. But
in an attempt to clean up and handle unaligned accesses in the same way
we ignore that and use the common asm-generic/unaligned.h directly
instead.
Jens Wiklander [Mon, 22 May 2023 12:22:34 +0000 (14:22 +0200)]
m68k: use asm-generic/unaligned.h
M68k essentially duplicates the content of asm-generic/unaligned.h, with
an exception for non-Coldfire configurations. Coldfire configurations
are apparently able to do unaligned accesses. But in an attempt to clean
up and handle unaligned accesses in the same way we ignore that and use
the common asm-generic/unaligned.h directly instead.
Tom Rini [Tue, 16 May 2023 16:34:47 +0000 (12:34 -0400)]
include: Remove unused header files
As part of various code clean-ups we have on occasion missed removing
unused header files. None of these files are referenced anywhere else
at this point.
Andre Przywara [Mon, 15 May 2023 13:52:14 +0000 (14:52 +0100)]
faraday: remove orphaned header file
Commit 11232139e399 ("nds32: Remove the architecture") removed the nds32
architecture, and with it the last user of the Faraday AHB controller
header file.
Consequently remove that header file as well.
This was found because the inclusion guard was misspelled.
Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Tom Rini <trini@konsulko.com>
Tom Rini [Wed, 17 May 2023 00:24:21 +0000 (20:24 -0400)]
Merge branch '2023-05-16-remove-misuse-of-env-is-nowhere' into next
To quote the author:
When using a list of writeable variables, the initial values come from
the built-in default environment since commit 5ab81058364b
("env: Complete generic support for writable list"). Remove unnecessary
misuse of the env is nowhere driver as default environment.
Marek Vasut [Sat, 6 May 2023 14:42:40 +0000 (16:42 +0200)]
usb: gadget: Add and use matching SPL USB ethernet gadget Kconfig symbols
Define SPL_USB_ETH_RNDIS symbol to make it possible to select USB
gadget ethernet support in SPL and U-Boot separately in Kconfig .
Make use of the new symbols in gadget Makefile and move the rndis.o
just below the now merged USB_ETHER symbol in Makefile.
Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Tom Rini <trini@konsulko.com>
Marek Vasut [Sat, 6 May 2023 14:42:39 +0000 (16:42 +0200)]
usb: Move SPL_USB_GADGET and related Kconfig symbols to drivers/usb/
To avoid piling up all the various Kconfig symbols in one place, i.e.
common/spl/Kconfig, move the USB Kconfig symbols into drivers/usb/ .
This commit moves SPL_USB_GADGET and related symbols. Fix typo and
rename SPL_USB_GADGET to "USB Gadget Support in SPL" .
Update the gadget Makefile to match the symbol changes.
Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Tom Rini <trini@konsulko.com>
Marek Vasut [Sat, 6 May 2023 14:42:38 +0000 (16:42 +0200)]
usb: Move SPL_USB_STORAGE Kconfig symbol to drivers/usb/
To avoid piling up all the various Kconfig symbols in one place, i.e.
common/spl/Kconfig, move the USB Kconfig symbols into drivers/usb/ .
This commit moves SPL_USB_STORAGE and matching SYS_USB_FAT_BOOT_PARTITION .
Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Tom Rini <trini@konsulko.com>
Marek Vasut [Sat, 6 May 2023 14:42:37 +0000 (16:42 +0200)]
usb: Move SPL_USB_HOST Kconfig symbol to drivers/usb/
To avoid piling up all the various Kconfig symbols in one place, i.e.
common/spl/Kconfig, move the USB Kconfig symbols into drivers/usb/ .
This commit moves SPL_USB_HOST and updates help text of both USB_HOST
and SPL_USB_HOST .
Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Tom Rini <trini@konsulko.com>
projects / u-boot.git / log