- Remove unneeded USB board code and fix reset on mx6ul_14x14_evk.
- Update fastboot buffer size/address for verdin-imx8m{m|p}.
- Fix imxrt1050-evk boot and convert it to standard boot.
- Fix imx8qxp-mek and imx8qm-mek boot.
- Add support for the i.MX93 9X9 QSB board.
- Make livetree API to work on i.MX.
- Set sane default value for i.MX8M SPL_LOAD_FIT_ADDRESS.
- Deduplicate DH i.MX8MP/i.MX6 DHSOM defconfigs.
- Select default TEXT_BASE for i.MX6/i.MX7.
- Several updates for DH i.MX8MP DRC02.
Marek Vasut [Sun, 20 Oct 2024 21:00:38 +0000 (23:00 +0200)]
ARM: imx: soc: Select default TEXT_BASE for i.MX6
Select default U-Boot and SPL text base for the i.MX6 SoC. The U-Boot
and SPL text base is picked as the one used by various i.MX6 boards.
Update all the boards.
Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Tom Rini <trini@konsulko.com>
Jesse Taube [Fri, 25 Oct 2024 02:02:26 +0000 (22:02 -0400)]
imx: imxrt1050-evk: Fix missing clocks for mmc
Two of the clocks required by the usdhc1 controller are missing from the
clock controller node. A recent change enables all the clocks in the
esdhc node, which fails as they are not defined in the clock controller.
Fixes: 76332fae769 ("mmc: fsl_esdhc_imx: Enable AHB/IPG clk with clk bulk API") Signed-off-by: Jesse Taube <Mr.Bossman075@gmail.com> Cc: Peng Fan <peng.fan@nxp.com>
Marek Vasut [Fri, 25 Oct 2024 22:55:06 +0000 (00:55 +0200)]
arm64: imx: Deduplicate DH i.MX6 DHSOM defconfig
Deduplicate defconfigs for all DH i.MX6 DHSOM by including common
configs/imx_dhsom_defconfig . This does introduce changes to the
board configuration, namely it enables commands used on all DHSOM
devices consistenty, the prompt is changed to u-boot=>, support for
booting non-Linux OS which was likely never used is disabled, GPT
partition table support is enabled, generic MTD support is enabled,
LED support is enabled, DM PHY, PMIC and regulator support is also
enabled, KASLR command is enabled.
Deduplicate defconfigs for all DH i.MX8MP DHSOM by factoring out the
common parts into generic _dhsom_defconfig and including those using
the #include <configs/...> preprocessor macro, which is applicable to
defconfigs as well. This enables CMD_EXPORTENV on all iMX8MP DHSOM
systems to be consistent with other DHSOM systems.
Marek Vasut [Fri, 25 Oct 2024 22:55:04 +0000 (00:55 +0200)]
arm64: imx: imx8mp: Disable PCA954x I2C mux on DH i.MX8MP DRC02 and PicoITX
Neither the DRC02 nor PicoITX carrier board contains the PCA954x I2C mux
chip, the chip is only present on PDK3 carrier board. Disable support for
the PCA954x mux chip and I2C mux altogether on both i.MX8MP DHCOM DRC02 and
PicoITX.
Tom Rini [Fri, 25 Oct 2024 20:22:36 +0000 (14:22 -0600)]
Merge patch series "Allow showing the memory map"
Simon Glass <sjg@chromium.org> says:
This little series adds a new 'memmap' command, intended to show the
layout of memory within U-Boot and how much memory is available for
loading images.
Simon Glass [Mon, 21 Oct 2024 08:19:29 +0000 (10:19 +0200)]
cmd: Move meminfo command into its own file
In preparation for expanding this command, move it into a separate file.
Rename the function to remove the extra underscore. Update the number of
arguments to 1, since 3 is incorrect.
Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Simon Glass [Mon, 21 Oct 2024 08:19:28 +0000 (10:19 +0200)]
bootstage: Allow counting memory without strings
The bootstage array includes pointers to strings but not the strings
themselves. The strings are added when stashing, but including them in
the size calculation gives an inflated view of the amount of space used
by the array.
Update this function so it can return the amount of memory used by the
bootstage structures themselves, without the strings which they point
to.
Simon Glass [Mon, 21 Oct 2024 08:19:26 +0000 (10:19 +0200)]
common: Tidy up how malloc() is inited
The call to malloc() is a bit strange. The naming of the arguments
suggests that an address is passed, but in fact it is a pointer, at
least in the board_init_r() function and SPL equivalent.
Update it to work as described. Add a function comment as well.
Note that this does adjustment does not extend into the malloc()
implementation itself, apart from changing mem_malloc_init(), since
there are lots of casts and pointers and integers are used
interchangeably.
Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Tom Rini [Fri, 25 Oct 2024 17:55:23 +0000 (11:55 -0600)]
Merge tag 'xilinx-for-v2025.01-rc1-v2' of https://source.denx.de/u-boot/custodians/u-boot-microblaze
AMD/Xilinx changes for v2025.01-rc1 v2
.mailmap:
- Switch Padmarao's email to AMD one
zynq_spi:
- Make update_stripe static
xilinx:
- Update DT description for EMMCs
zynqmp:
- Update logic around RPUs and tcm handling
- Update bootmenu selection for Kria
- Add description for SC vm-p-b1369
- Fix comment about file location in zynqmp-p-a2197-00-revA.dts
versal:
- Fix logic around USB boot
versal2:
- Disable useless features for Mini configurations
versal-net:
- Get rid of current-speed DT property from mini configuration
Dfu:
- Rely on device tree for spi speed/mode on spi flash
Android Image:
- Fix booting on platforms having > 4GiB of memory
- Decompress boot image to kernel_addr_r when compression is enabled
- Honor CONFIG_SYS_LOAD_ADDR when mkbootimg uses default address
Bcb:
- Rework bcb command to use U_BOOT_LONGHELP
- Move ab_select cmd to bcb cmd
- Implement ab_dump command in bcb
- bcb: Write '_<slot>' instead of '<slot>' to misc partition
Padmarao Begari [Fri, 11 Oct 2024 11:34:35 +0000 (17:04 +0530)]
arm64: zynqmp: fix tcm initialization for mini u-boot
Fix the issue introduced by commit fed064477c2c
("arm64: zynqmp: Print an error for split to lock mode switch").
The mini u-boot is hanging, because of the tcm is not initialized.
The mini u-boot is using the tcm to reserve the mmu table and
currently it is not initialized, so allowing u-boot to initialize
the tcm.
Paul Alvin [Wed, 25 Sep 2024 07:03:13 +0000 (09:03 +0200)]
xilinx: Add cap-mmc-hw-reset and no-sd, no-sdio property to eMMC
Add "cap-mmc-hw-reset" property to the eMMC DT node to perform the
eMMC device hardware reset.
Also, add "no-sd", "no-sdio" properties to eMMC DT node to skip
unwanted sd, sdio related commands during initialization for eMMC
device as this may lead to unnecessary register dump.
xilinx: zynqmp: Remove conditional check for bootmenu_default variable
As per bootmenu support added default boot options to CC on AMD CCs and
default to SOM on others.
However, if no secondary boot device is enabled in the design,it should
be the default boot option for SOM when combined with AMD CCs because it
only contains SOM peripherals.
To address this issue, The conditional check for the bootmenu_default
variable was removed, and it has always been set to SOM as the default
boot option.
In this way, users can choose preferred boot options from the bootmenu
based on the boot devices configured in the design for AMD CCs.
Padmarao Begari [Tue, 1 Oct 2024 08:25:37 +0000 (13:55 +0530)]
xilinx: common: fix script address for Microblaze
Fix the issue introduced by commit 067e0294806e
("board: xilinx: Remove conditional check for Microblaze").
The scriptaddr should be physical location not really offset
from start of DDR. When U-Boot is not found boot.scr script
address in device tree, then it is assigned based on script
address and ram base address for Microblaze and i.e exceeding
DDR memory. To fix this, the script address is assigned
initially with offset instead of address. Later it is added
with ram base address and gets the physical address.
arm64: zynqmp: Fix tcminit mode value based on argv
The RPU pytest introduced by commit e894c10c040b
("test/py: zynqmp_rpu: Add test for loading RPU apps") expects
3rd parameter as string not a number that's why extend command
to actually handle both. The issue with existing code is that
when any non number string is passed hextoul returns 0. For
backward compatibility zynqmp tcminit 0/1 can be still used but
it is recommended to use strings instead.
arm64: zynqmp: Print an error for split to lock mode switch
The zynqmp tcminit crashes the U-Boot when switching from
r5-mode "split" to "lockstep" instead it should throw an error.
When cpu is enabled, the check_tcm_mode() function checks
if the previous mode is "split", switch mode is "lockstep" then
it returns the error code and the initialize_tcm() function is not
updating the global control register of the RPU instead it prints
the error message. When cpu is disabled, the check_tcm_mode()
function returns the success code for switch split to lockstep mode.
Rasmus Villemoes [Thu, 24 Oct 2024 10:01:45 +0000 (12:01 +0200)]
imx8m: set sane default value for SPL_LOAD_FIT_ADDRESS
I enabled IMX_HAB on an imx8mp board, but even though I knew about the
implementation, I forgot that I had to provide a sane value for
SPL_LOAD_FIT_ADDRESS. The help text for IMX_HAB doesn't mention this
implicit requirement, and there's no build-time warning; the default
0x0 value just ends up being returned from
board_spl_fit_buffer_addr(), obviously resulting in a non-booting
board.
The existing imx8m* board configs that set a non-zero value currently
all use 0x44000000. The actual value doesn't matter too much, but 0 is
always wrong for imx8m platforms. So just use 0x44000000 as default
for those platforms.
Tim Harvey [Wed, 23 Oct 2024 20:28:53 +0000 (13:28 -0700)]
imx: power-domain: Convert to use livetree API for fdt access
Convert to using livetree API functions.
Without this if livetree is enabled (OF_LIVE) the imx8m-power-domain
driver will (silently) fail to probe its children leaving you with
no power domain support causing issues with certain devices.
Signed-off-by: Tim Harvey <tharvey@gateworks.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
Remove FASTBOOT_BUF_SIZE from verdin-imx8mm_defconfig and
verdin-imx8mp_defconfig to use the default value of 0x7000000, aligning
with other Toradex boards.
Update FASTBOOT_BUF_ADDR to 0x44200000, consistent with the value in
previous downstream NXP U-Boot releases. This will make fastboot
applications continue working with upstream U-Boot by using the same
address.
Signed-off-by: Hiago De Franco <hiago.franco@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Peng Fan [Sat, 19 Oct 2024 00:51:25 +0000 (08:51 +0800)]
arm: dts: imx8qm-mek: fix boot
serial_init runs into panic because no serial device found.
Update the device tree to include bootph-some-ram for some critial
devices needed in pre-reloc stage
Also update usdhc related properties to avoid card initialization
failure.
Fixes: 8c103c33fb1 ("dm: dts: Convert driver model tags to use new schema") Signed-off-by: Peng Fan <peng.fan@nxp.com>
Peng Fan [Sat, 19 Oct 2024 00:51:24 +0000 (08:51 +0800)]
arm: dts: imx8qxp-mek: fix boot
serial_init runs into panic because no serial device found.
Update the device tree to include bootph-some-ram for some critial
devices needed in pre-reloc tage
Fixes: 8c103c33fb1 ("dm: dts: Convert driver model tags to use new schema") Signed-off-by: Peng Fan <peng.fan@nxp.com>
Andy Shevchenko [Mon, 21 Oct 2024 14:20:45 +0000 (17:20 +0300)]
Mark a few functions static inline
The function prototypes that are defined in the header most likely has
to be marked as static inline. This helps avoiding the compiler warnings:
include/mux.h:120:14: warning: no previous prototype for ‘mux_control_states’ [-Wmissing-prototypes]
include/mux.h:125:18: warning: no previous prototype for ‘mux_control_select’ [-Wmissing-prototypes]
include/mux.h:133:5: warning: no previous prototype for ‘mux_control_deselect’ [-Wmissing-prototypes]
include/mux.h:138:21: warning: no previous prototype for ‘mux_control_get’ [-Wmissing-prototypes]
include/mux.h:143:6: warning: no previous prototype for ‘mux_control_put’ [-Wmissing-prototypes]
include/mux.h:147:21: warning: no previous prototype for ‘devm_mux_control_get’ [-Wmissing-prototypes]
include/mux.h:153:5: warning: no previous prototype for ‘dm_mux_init’ [-Wmissing-prototype ]
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Andy Shevchenko [Mon, 21 Oct 2024 13:56:33 +0000 (16:56 +0300)]
cmd: nvedit: Mark a few functions static
Some functions are not used anywhere except the same file
where they are defined. Mark them static. This helps avoiding
the compiler warnings:
cmd/nvedit.c:201:5: warning: no previous prototype for ‘do_env_ask’ [-Wmissing-prototypes]
cmd/nvedit.c:315:5: warning: no previous prototype for ‘do_env_callback’ [-Wmissing-prototypes]
cmd/nvedit.c:384:5: warning: no previous prototype for ‘do_env_flags’ [-Wmissing-prototype ]
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Simon Glass <sjg@chromium.org>
There are no users of the blk_create_device() function outside the uclass.
Let's make it static. This will ensure that new block drivers will use
blk_create_devicef().
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Reviewed-by: Simon Glass <sjg@chromium.org>
Add the latest 4000 MT/s DDR config generated by
Jacinto7_DDRSS_RegConfigTool Rev 0.11 for J722S , make it the
default config and update A53 default clock to 1.4 GHz matching
the default speed grade (K).
Marek Vasut [Sun, 20 Oct 2024 15:43:12 +0000 (17:43 +0200)]
boot: Introduce BOOTSTD_MENU to control bootflow menu build
The bootflow_menu.c code depends on e.g. scene_txt_set_font(),
which is only built when CONFIG_EXPO is enabled. Introduce new
Kconfig symbol BOOTSTD_MENU which depends on EXPO to prevent
triggering errors like these in case e.g. CONFIG_VIDEO=n :
"
boot/bootflow_menu.c:158:(.text+0x8851): undefined reference to `scene_txt_set_font'
"
Make the symbol depend on BOOTSTD_FULL as well to get rid of
the Makefile dependency workaround. Since BOOTSTD_FULL is not
available in SPL, do not define SPL variant of BOOTSTD_MENU.
Fix up bootflow test accordingly.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Reviewed-by: Simon Glass <sjg@chromium.org>
Han Xu [Sat, 5 Oct 2024 23:46:20 +0000 (07:46 +0800)]
mtd: spi-nor: Add mt35xu01gbba octal mode SPI NOR flash
Add SPI NOR flash id for mt35xu01gbba which supports 4 bytes address with
octal mode read.
Signed-off-by: Han Xu <han.xu@nxp.com> Signed-off-by: Alice Guo <alice.guo@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
Neil Armstrong [Thu, 17 Oct 2024 14:44:44 +0000 (16:44 +0200)]
image: android: handle ramdisk default address
The two tools that create android boot images, mkbootimg and the fastboot
client, set the kernel address by default to 0x11008000.
U-boot always honors this field, and will try to copy the ramdisk to
whatever value is set in the header, which won't be mapped to the actual
RAM on most platforms, resulting in the kernel obviously not booting.
All the targets in U-Boot right now will download the android boot image
to CONFIG_SYS_LOAD_ADDR, which means that it will already have been
downloaded to some location that is suitable to use the ramdisk in-place
for header version 0 to 2. For header version 3 and later, the ramdisk
can't be used in-place to use ramdisk_addr_r in this case.
Neil Armstrong [Thu, 17 Oct 2024 14:44:43 +0000 (16:44 +0200)]
image: android: do not boot XIP when kernel is compressed
When trying to boot an android boot image with a compressed
kernel, if the kernel is used in-place because it was created
with mkbootimg, the space will be too small to properly
uncompress.
Take in account the compressed state, and if compressed
use the kernel_addr_r which should be big enough.
Dmitry Rokosov [Thu, 17 Oct 2024 14:12:11 +0000 (17:12 +0300)]
common: android_ab: fix slot suffix for abc block
To align with the official Android BCB (Bootloader Control Block)
specifications, it's important to note that the slot_suffix should start
with an underscore symbol.
For a comprehensive understanding of the expected slot_suffix format in
userspace, please refer to the provided reference [1].
The ab_dump command allows you to display ABC data directly on the
U-Boot console. During an A/B test execution, this test verifies the
accuracy of each field within the ABC data.
Dmitry Rokosov [Thu, 17 Oct 2024 14:12:09 +0000 (17:12 +0300)]
cmd: bcb: change strcmp() usage style in the do_bcb_ab_select()
In the entire cmd/bcb.c file, the return value of strcmp() is not
directly compared to 0. Therefore, it would be better to maintain this
style in the new do_bcb_ab_select() function as well.
Dmitry Rokosov [Thu, 17 Oct 2024 14:12:08 +0000 (17:12 +0300)]
treewide: bcb: move ab_select command to bcb subcommands
To enhance code organization, it is beneficial to consolidate all A/B
BCB management routines into a single super-command.
The 'bcb' command is an excellent candidate for this purpose.
This patch integrates the separate 'ab_select' command into the 'bcb'
group as the 'ab_select' subcommand, maintaining the same parameter list
for consistency.
Neil Armstrong [Tue, 1 Oct 2024 16:06:12 +0000 (18:06 +0200)]
dfu: sf: rely on DT for spi speed and mode
Align with cmd_sf, and try to rely on DT for spi speed and mode,
and still fallback on spi_flash_probe() if it fails.
With the current scheme, spi_flash_probe() will be called
with CONFIG_SF_DEFAULT_SPEED and CONFIG_SF_DEFAULT_MODE
with are set to 0 by default on DT platforms using DM_SPI_FLASH.
Like cmd_sf, keep the option to specify the speed and mode
from the dfu_alt_mode string, but rely on DT properties
if not specified.
Using CONFIG_SF_DEFAULT_SPEED and CONFIG_SF_DEFAULT_MODE
makes the SPIFC controller on Amlogic Meson G12B & SM1
hardware fail and is unable to recover until a system reboot.
To smoothly handle the transition from the legacy SPI FLASH
API to the driver model API, add the DM functions
as dummy inline functions.
Today, client code uses #if/#else conditionals, but it's better
to use if(IS_ENABLED()) to make sure all code builds fine
and avoid configuration hell, leaving the compiler remove
the dead code.
An example is cmd/sf, which could make use of those dummy
functions to drop the conditional compilation.
* watchdog: gpio_wdt: add support for stoppable devices (Rasmus)
* watchdog: Add DaVinci's watchdog support (Bastien)
* cyclic: disentangling cyclic API from schedule() (Rasmus)
* watchdog: introduce separate SPL symbol for WDT_GPIO (Rasmus)
watchdog: introduce separate SPL symbol for WDT_GPIO
Currently, enabling WDT_GPIO on a board which uses SPL, but does not
have SPL_WDT, SPL_DM_GPIO or SPL_OF_CONTROL enabled, breaks the build.
Make it possible to use the WDT_GPIO driver on such boards by
introducing a separate symbol controlling whether the driver is built
for SPL. Make it default to WDT_GPIO such that boards that already
have it enabled and all the SPL prerequisites satisfied will continue
to have it in SPL.
Signed-off-by: Rasmus Villemoes <ravi@prevas.dk> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Stefan Roese <sr@denx.de>
watchdog.h: change include of cyclic.h to u-boot/schedule.h
Nobody relies on getting the cyclic API declared by including the
watchdog.h header, but for historical reasons, many TUs include
watchdog.h to get a declaration of schedule(). Now that we have a
dedicated header for just that, include that header instead of
cyclic.h.
Eventually, all TUs that call schedule() should themselves include
u-boot/schedule.h, but this is a step towards getting rid of
unnecessary include statements in cyclic.h and global_data.h.
Signed-off-by: Rasmus Villemoes <ravi@prevas.dk> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Stefan Roese <sr@denx.de>
This is the last place outside of cyclic.c that references
cyclic_run() directly. Replace by schedule(), so that cyclic_run() can
be made private. This also better matches what I believe commit 29caf9305b6f ("cyclic: Use schedule() instead of WATCHDOG_RESET()")
intended to do.
Signed-off-by: Rasmus Villemoes <ravi@prevas.dk> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Stefan Roese <sr@denx.de>
fs/cramfs: use schedule instead of cyclic_run as callback
Prior to commit 29caf9305b6f ("cyclic: Use schedule() instead of
WATCHDOG_RESET()") we had
/* Currently only needed for fs/cramfs/uncompress.c */
static inline void watchdog_reset_func(void)
{
WATCHDOG_RESET();
}
and .outcb was set to that watchdog_reset_func(). Said commit changed
that .outcb to cyclic_run instead of schedule, which would otherwise
match all the other WATCHDOG_RESET replacements done. As the
HW_WATCHDOG case is not handled by cyclic_run, this seems to be an
oversight.
Signed-off-by: Rasmus Villemoes <ravi@prevas.dk> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Stefan Roese <sr@denx.de>
Modifying a generic header like watchdog.h, removing not directly used
asm/ptrace.h header relies on whoever includes it to already have
included something that defines the type ulong.
Make the asm/ptrace.h header self-contained by including the proper
header.
Signed-off-by: Rasmus Villemoes <ravi@prevas.dk> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Stefan Roese <sr@denx.de>
This makes use of the cyclic API but relies on implicitly getting the
appropriate declarations through some nested include. Include the
cyclic.h header directly.
Signed-off-by: Rasmus Villemoes <ravi@prevas.dk> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Stefan Roese <sr@denx.de>
I noticed an "unnecessary" include of <cyclic.h> in
global_data.h, in the sense that nothing in cyclic.h is needed in
order to define 'struct global_data'.
Well, it's not unnecessary, as it implicitly ensures that everybody
gets a declaration of schedule(), and schedule() is (obviously) called
all over the tree. Almost none of those places directly include
<cyclic.h>, but for historical reasons, many do include
<watchdog.h> (most schedule() instances are replacements of
WATCHDOG_RESET()).
However, very few TUs actually need the declarations of the
cyclic_register() and struct cyclic_info, and they also don't really
need anything from the watchdog.h header.
So introduce a new header which just contains a declaration of
schedule(), which can then be included from all the places that do
call schedule(). I removed the direct reference to cyclic_run(),
because we shouldn't have two public functions for doing roughly the
same without being very explicit about when one should call one or the
other.
Testing of later patches that explicitly include <schedule.h> when
schedule() is used revealed a problem with host tool build on win32,
which apparently picked up a host <schedule.h>. To avoid that problem,
put the new header in include/u-boot/ and hence make the include
statements say <u-boot/schedule.h>.
Signed-off-by: Rasmus Villemoes <ravi@prevas.dk> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Stefan Roese <sr@denx.de>
WATCHDOG_RESET is no more. Replace the reference by schedule().
While here, rearrange the sentence a bit so that "cyclic_run()"
becomes the object and "the main function responsible for calling all
registered cyclic functions" a parenthetical rather than the other way
around, which at least to me makes it more readable.
Signed-off-by: Rasmus Villemoes <ravi@prevas.dk> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Stefan Roese <sr@denx.de>
watchdog: gpio_wdt: add support for stoppable devices
Back when I added this driver in commit 2ac8490412c9, I wrote
The corresponding linux driver apparently has support for some
watchdog circuits which can be disabled by tri-stating the gpio, but I
have never actually encountered such a chip in the wild;
That has changed now; I have a board with just such a watchdog on my
desk currently. Add support for that.
- For a hw_algo="toggle" device, the gpio is requested as output if the
always-running flag is set, otherwise as input.
- The ->start() method is updated to change the direction to output when
required (i.e. it is not always-running).
- The ->stop() method is implemented, but of course reports failure if
always-running.
As I still haven't met any hw_algo="level" devices, I'm not entirely
sure how they fit in, but I'm borrowing logic from the corresponding
linux driver:
- In ->probe(), such devices always request the gpio as GPIOD_IS_OUT.
- In ->stop(), the linux driver has an "eternal ping" comment and sets
the gpio to (logic) high.
Stefan:
Added necessary changes in test/dm/wdt.c to fix CI build breakage, as
suggested by Rasmus.
Signed-off-by: Rasmus Villemoes <ravi@prevas.dk> Reviewed-by: Stefan Roese <sr@denx.de>
* VNBYTES() comment fix
* add VIDEO dependency for FDT_SIMPLEFB
* fdt_simplefb: drop not needed CONFIG_VIDEO check
* am62x,evm: preserve splash screen while OS is booting
* simplefb: warning fix for CONFIG_FDT_64BIT=n
board: ti: am62x: evm: Update simple-framebuffer node in device-tree
Update simple-framebuffer device-tree node by enumerating framebuffer
related information in existing simple-framebuffer node in Linux
device-tree file and enabling it.
In case there is no simple-framebuffer stub detected in Linux kernel
device-tree and video is still active, then update the device-tree to
reserve the framebuffer region for the active splash screen.
This helps preserve the splash screen till the display server takes over
after OS is booted.
boot/Kconfig: Add Video Kconfig as dependency for FDT_SIMPLEFB
The fdt_simplefb.c APIs rely on video-uclass APIs and structures to
fill/update framebuffer information, so compile it only when VIDEO
Kconfig is enabled, as otherwise below warning can be seen if VIDEO
Kconfig is disabled:
"boot/fdt_simplefb.c:96:12: warning: fdt_simplefb_enable_existing_node
defined but not used [-Wunused-function]
96 | static int fdt_simplefb_enable_existing_node(void *blob)"
The VNBYTES() macro has been updated to silence possible warnings
regarding authorized (but unusual) uses of this macro, but the comment
was kept unchanged. A year has passed so let's fix the comment now to
avoid confusions.
Fixes: cc05d352fbc ("video: Add parentheses around VNBYTES() macro") Suggested-by: Tom Rini <trini@konsulko.com> Link: https://lore.kernel.org/u-boot/20240906183432.GG3879073@bill-the-cat/ Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Simon Glass <sjg@chromium.org>
The only defconfig we use for which it is not broken is
stm32mp13_defconfig. They all work just fine in v2024.07.
The symptoms are slightly different, but all related to the fact that
some transitively included header uses IS_ENABLED or CONFIG_IS_ENABLED
without linux/kconfig.h having already been included.
A simple git bisect doesn't produce anything sensible, it ends up at 3a9f642ca94 (crypto: nuvoton: npcm_sha: Support SHA 384/512) which
clearly has nothing to do with this. But digging deeper, one
eventually finds 0f92fa45603 ("env: Remove <common.h> and add needed
includes").
So at first I tried adding "#include <linux/kconfig.h>" in
include/env_default.h and include/env_flags.h. That fixes it for some,
but not all, of the above. For example rpi_3_defconfig still fails,
then in log.h complaining about BIT() and u8 not being defined. At
least BIT() is should have gotten from bitops.h, except that that's
behind ifdef __KERNEL__, so not set for the envtools build.
It turns out that the envtools source code in fw_env_private.h already
has some hackery to deal with all this, in the form of the __ASSEMBLY__
games it plays before including config.h. It seems that if we just
make sure to do that include early enough, so that config.h is indeed
parsed with that __ASSEMBLY__ hackery in place, everything builds
fine.
Tom Rini [Mon, 21 Oct 2024 23:53:11 +0000 (17:53 -0600)]
Merge patch series "aspeed: ast2700: Add Caliptra ECDSA driver"
Chia-Wei Wang <chiawei_wang@aspeedtech.com> says:
Aspeed AST2700 SoCs integrates the Caliptra secure IP, where an ECDSA384
signature verification HW interface is exported for SoC crypto needs.
This patch series firstly extends the FIT image signing/verify common
code to support the ECDSA384 algorithm. For better convenience, the
device tree for ECDSA public key storage is also revised by referring
to RSA implementations.
After the FIT common code revision, the driver is implemented for
AST2700 to leverage the Caliptra ECDSA384 signature verification.
These are verified by signed FIT images with the algorithm "sha384,ecdsa384".
projects / u-boot.git / log