Tom Rini [Mon, 5 Dec 2022 13:33:19 +0000 (08:33 -0500)]
Merge tag 'xilinx-for-v2023.01-rc3-v2' of https://source.denx.de/u-boot/custodians/u-boot-microblaze
Xilinx changes for v2023.01-rc3-v2
xilinx:
- Fix MAC address selection for System Controller from FRU
- Cleanup Kconfig (ZYNQ_MAC_IN_EEPROM symbol)
versal:
- Create u-boot.elf for mini spi configurations
versal-net:
- Enable MT35XU flash
zynq:
- Add missing timer to DT for mini configurations
zynqmp:
- Do not include psu_init to U-Boot by default
- Do not enable IPI by default to mini U-Boot
- Update Luca's fragment
- Fix SPL_FS_LOAD_PAYLOAD_NAME usage
spi:
- gqspi: Fix tapdelay values
- gqspi: Fix 64bit address support
- cadence: Remove condition for calling enable linear mode
- nor-core: Invert logic to reflect sst26 flash unlocked
mtd: spi-nor-core: Invert logic to reflect sst26 flash unlocked
flash_is_locked is changed to flash_is_unlocked with commit 513c6071ce73
("mtd: spi: Convert is_locked callback to is_unlocked"). sst26_is_locked()
is also changed to sst26_is_unlocked() but the logic remained same.
Invert the logic for the flash lock/unlock to work properly.
SPL_FS_LOAD_PAYLOAD_NAME depends on SPL to be enabled.
If SPL is not enabled code still expects SPL_FS_LOAD_PAYLOAD_NAME to be
present. That's why setup proper dependency in the code.
And by doing so also change the logic around dfu_alt_info string
composition to be simpler.
Michal Simek [Tue, 29 Nov 2022 12:23:20 +0000 (13:23 +0100)]
ARM: zynq: Add missing twd timer for mini configurations
The commit b7e0750d8872 ("zynq: Convert arm twd timer to DM driver")
switched timer to DM but missing to add nodes to all mini configurations.
Based on it missing timer end up in non functional system where any delay
doesn't work.
Michal Simek [Tue, 29 Nov 2022 15:09:42 +0000 (16:09 +0100)]
arm64: zynqmp: Do not enable IPI by default
ZynqMP mini configurations are not using IPI driver and enabling this is
adding additional ~1200 Bytes (depends on configuration).
This ends up in situation that there is no enough space in OCM for
relocation that's why disable this driver for all mini configurations.
Michal Simek [Fri, 2 Dec 2022 08:18:06 +0000 (09:18 +0100)]
arm64: zynqmp: Do not include psu_init to U-Boot by default
The commit ed35de617013 ("Convert CONFIG_ZYNQMP_PSU_INIT_ENABLED to
Kconfig") converted CONFIG_ZYNQMP_PSU_INIT_ENABLED symbol and enabled it by
default which is not correct configuration.
Intention of this config was to have it enabled by default for SPL and
provide an option to users to also do low level initialization directly
from U-Boot.
That's why it is necessary to define second symbol with SPL marking in it
and properly use symbols depends on usage in Makefile.
Also disable ZYNQMP_PSU_INIT_ENABLED from boards which enables it by
default. CONFIG_SPL_ZYNQMP_PSU_INIT_ENABLED is enabled by default when SPL
is enabled.
The commit ba74bcf3e07b ("xilinx: common: Remove
zynq_board_read_rom_ethaddr()") removed zynq_board_read_rom_ethaddr()
because xlnx,eeprom link via DT chosen node is no longer used. But forget
to remove Kconfig entries which are used by this code only.
spi: zynqmp_qspi: Add support for 64-bit read/write
When we pass the 64-bit address to read/write, only lower 32-bit
address is getting updated. Program the upper 32-bit address in the
DMA destination memory address MSBs register, which can handle upto
44-bit destination address.
arm64: versal: Enable REMAKE_ELF for mini_ospi/mini_qspi
Enable the config REMAKE_ELF in xilinx_versal_mini_ospi_defconfig
and xilinx_versal_mini_qspi_defconfig which generates u-boot.elf.
This commit a8c281d4b737("Convert CONFIG_REMAKE_ELF to Kconfig")
misses to enable this config in these defconfigs.
T Karthik Reddy [Wed, 23 Nov 2022 09:04:51 +0000 (02:04 -0700)]
spi: zynqmp_gqspi: Update tapdelay value
The driver was using an incorrect value for GQSPI_LPBK_DLY_ADJ_DLY_1
tapdelay for Versal for frequencies above 100MHz. Change it from 2 to 1
based on the recommended value in IP spec.
Lukas Funke [Fri, 28 Oct 2022 12:15:47 +0000 (14:15 +0200)]
arm64: zynqmp: dynamically mark r5 cores as used
When Linux boot takes over control of the pmu
(by signaling PM_INIT_FINALIZE via ipi), pmu will switch off 'unused'
rpu cores. The Xilinx zynqmp fsbl prevents switching off those cores by
marking rpu cores as 'used' when loading code partitions to those cores.
The current u-boot SPL is missing this behaviour, which results in
halting rpu cores during Linux boot.
This commit mimics the xilinx zynqmp fsbl behavior by marking r5 cores as
used when they are released during boot.
Andy Chiu [Tue, 1 Nov 2022 03:58:00 +0000 (11:58 +0800)]
net: xilinx_axi: check PCS/PMA PHY status in setup_phy
Both PCS/PMA PHY and the external PHY need to have a valid link status
in order to have Ethernet traffic. Check and wait this status at
setup_phy() so that we could diagnose if there is a PHY issue.
Andy Chiu [Tue, 1 Nov 2022 03:57:59 +0000 (11:57 +0800)]
net: xilinx_axi: add PCS/PMA PHY
If we bridge an external PHY to Xilinx's PCS/PMA PHY and would like to
get and set the real status of the PHY facing the external world. Then
we should phy_connect() to the external PHY instead of the PCS/PMA one.
Thus, we add a pcs-handle DT entry, which have been merged in Linux, and
leave the configuration of it to the driver itself.
Unlike Linux, where the PCS/PMA PHY is managed by phylink, managing the
PCS/PMA PHY is only internal to the driver in U-Boot. The PCS/PMA PHY
pressents only when the phy-mode is configured as SGMII or 1000Base-X,
so it is always 1 Gbps and full-duplex and we may skip passing link
information out.
Tom Rini [Sun, 4 Dec 2022 15:01:48 +0000 (10:01 -0500)]
Merge tag 'efi-2023-01-rc3' of https://source.denx.de/u-boot/custodians/u-boot-efi
Pull request for efi-2023-01-rc3
Documentation:
* describe DM firmware needed for j721e_evm
* describe management of UEFI security data base with eficonfig
UEFI:
* code clean-up for eficonfig command
* fix handling of DHCP aknowledge
* correct EFI memory type used for U-Boot code
* unit test for FatToStr() truncation
* add an EFI binary to print boot hart ID
Other:
* improve parameter checks in console functions
* fix variable initialization in blk_get_device_part_str
Masahisa Kojima [Fri, 2 Dec 2022 04:59:37 +0000 (13:59 +0900)]
doc: eficonfig: add description for UEFI Secure Boot Configuration
This commits adds the description for the UEFI Secure Boot
Configuration through the eficonfig menu.
Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org>
Redacted the complete document. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Masahisa Kojima [Fri, 2 Dec 2022 04:59:36 +0000 (13:59 +0900)]
eficonfig: use efi_get_next_variable_name_int()
eficonfig command reads all possible UEFI load options
from 0x0000 to 0xFFFF to construct the menu. This takes too much
time in some environment.
This commit uses efi_get_next_variable_name_int() to read all
existing UEFI load options to significantlly reduce the count of
efi_get_var() call.
Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org>
Masahisa Kojima [Fri, 2 Dec 2022 04:59:35 +0000 (13:59 +0900)]
efi_loader: utility function to check the variable name is "Boot####"
Some commands need to enumerate the existing UEFI load
option variable("Boot####"). This commit transfers some code
from cmd/efidebug.c to lib/efi_loder/, then exposes
efi_varname_is_load_option() function to check whether
the UEFI variable name is "Boot####".
Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org> Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Masahisa Kojima [Fri, 2 Dec 2022 04:59:33 +0000 (13:59 +0900)]
eficonfig: fix going one directory up issue
The directory name in eficonfig menu entry contains the
'\' separator. strcmp() argument ".." is wrong and one directory
up handling does not work correctly. strcmp() argument must
include '\' separator.
Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org> Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
EFI_LOADER_DATA/CODE is reserved for EFI applications.
Memory allocated by U-Boot for internal usage should be
EFI_BOOT_SERVICES_DATA or _CODE or EFI_RUNTIME_SERVICES_DATA or _CODE.
efi_loader: add an EFI binary to print boot hart ID
Provide an EFI binary that prints the boot hart ID as found in the
device-tree as /chosen/boot-hartid property and as provided by the
RISCV_EFI_BOOT_PROTOCOL.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
blk_get_device_part_str() should always initialize all info fields
including sys_ind. As a side effect the code is simplified.
Replace '(0 ==' by '(!' to conform with Linux coding style.
Fixes: 4d907025d6a5 ("sandbox: restore ability to access host fs through standard commands") Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Reviewed-by: Heiko Schocher <hs@denx.de>
We use the parameter file in console functions to choose from an array
after checking against MAX_FILES but we never check if the value of file
is negative.
Running ./u-boot -T -l and issuing the poweroff command has resulted in
crashes because os_exit() results in std::ostream::flush() calling U-Boot's
fflush with file being a pointer which when converted to int may be
represented by a negative number.
This shows that checking against MAX_FILES is not enough. We have to ensure
that the file argument is always positive.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Reviewed-by: Simon Glass <sjg@chromium.org>
Tom Rini [Fri, 2 Dec 2022 15:00:55 +0000 (10:00 -0500)]
Merge branch '2022-12-02-assorted-updates'
- Add Peter Robinson as a co-custodian for Pi, update the maintainer
record for common/usb_storage.c, re-add bmp_logo to tools-only and fix
SPI booting on the SanCloud BBE
Paul Barker [Mon, 14 Nov 2022 12:42:39 +0000 (12:42 +0000)]
am335x-evm: Fix spiboot configuration
The advanced address translation provided by CONFIG_SPL_OF_TRANSLATE is
needed to determine the base address of the uart0 peripheral on am335x
platforms when CONFIG_SPL_OF_CONTROL is enabled.
If CONFIG_SPL_OF_CONTROL is enabled in the base (non-spiboot)
am335x_evm_defconfig, then CONFIG_SPL_OF_TRANSLATE will also need to be
enabled there. Unfortunately this cannot be done pre-emptively due to
the kconfig dependencies.
The TI clk-ctrl & TI sysc drivers are also required to bring up the SPI
bus on am335x platforms.
Signed-off-by: Paul Barker <paul.barker@sancloud.com>
Paul Barker [Mon, 14 Nov 2022 12:42:38 +0000 (12:42 +0000)]
am335x-evm: Enable required dtb nodes in SPL
For successful boot when CONFIG_SPL_OF_CONTROL=y, we need to ensure that
the board EEPROM on i2c0, the uart0 serial port and the relevant boot
device (mmc1 or mmc2) can be accessed in the SPL. We also need to
preserve the parent nodes for each required dtb node.
Signed-off-by: Paul Barker <paul.barker@sancloud.com>
Paul Barker [Mon, 14 Nov 2022 12:42:37 +0000 (12:42 +0000)]
bus: Optionally include TI sysc driver in SPL/TPL
The TI sysc bus driver is required to allow access to the SPI bus on
am335x platforms. To support SPI boot this driver needs to be enabled in
the SPL/TPL as appropriate.
Signed-off-by: Paul Barker <paul.barker@sancloud.com>
Paul Barker [Mon, 14 Nov 2022 12:42:35 +0000 (12:42 +0000)]
dm: core: Fix iteration over driver_info records
We should only perform additional iteration steps when needed to
initialize the parent of a device. Other binding errors (such as a
missing driver) should not lead to additional iteration steps.
Unnecessary iteration steps can cause issues when memory is tightly
constrained (such as in the TPL/SPL) since device_bind_by_name()
unconditionally allocates memory for a struct udevice. On the SanCloud
BBE this led to boot failure caused by memory exhaustion in the SPL
when booting from SPI flash.
Signed-off-by: Paul Barker <paul.barker@sancloud.com>
Peter Robinson [Thu, 24 Nov 2022 14:05:59 +0000 (14:05 +0000)]
config: tools only: add VIDEO to build bmp_logo
Pre 2023.01 the bmp_logo was built as part of the tools-only_defconfig
build, something changed and the VIDEO dep needed to build it
is no longer pulled in so fix that by explicitly defining it.
Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
Yaron Micher [Thu, 10 Nov 2022 17:31:34 +0000 (19:31 +0200)]
net: macb: Fix race caused by flushing unwanted descriptors
The rx descriptor list is in cached memory, and there may be multiple
descriptors per cache-line. After reclaim_rx_buffers marks a descriptor
as unused it does a cache flush, which causes the entire cache-line to
be written to memory, which may override other descriptors in the same
cache-line that the controller may have written to.
The fix skips freeing descriptors that are not the last in a cache-line,
and if the freed descriptor is the last one in a cache-line, it marks
all the descriptors in the cache-line as unused.
This is similarly to what is done in drivers/net/fec_mxc.c
In my case this bug caused tftpboot to fail some times when other
packets are sent to u-boot in addition to the ongoing tftp (e.g. ping).
The driver would stop receiving new packets because it is waiting
on a descriptor that is marked unused, when in reality the descriptor
contains a new unprocessed packet but while freeing the previous buffer
descriptor & flushing the cache, the driver accidentally marked the
descriptor as unused.
Simulate a TCP HTTP server's response for testing wget command.
Signed-off-by: Ying-Chun Liu (PaulLiu) <paul.liu@linaro.org> Cc: Christian Gmeiner <christian.gmeiner@gmail.com> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Michal Simek <michal.simek@xilinx.com> Cc: Ramon Fried <rfried.dev@gmail.com> Cc: Simon Glass <sjg@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
Signed-off-by: Ying-Chun Liu (PaulLiu) <paul.liu@linaro.org> Cc: Christian Gmeiner <christian.gmeiner@gmail.com> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Michal Simek <michal.simek@xilinx.com> Cc: Ramon Fried <rfried.dev@gmail.com> Cc: Simon Glass <sjg@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
This commit adds a simple wget command that can download files
from http server.
The command syntax is
wget ${loadaddr} <path of the file from server>
Signed-off-by: Duncan Hare <DuncanCHare@yahoo.com> Signed-off-by: Ying-Chun Liu (PaulLiu) <paul.liu@linaro.org> Reviewed-by: Simon Glass <sjg@chromium.org> Cc: Christian Gmeiner <christian.gmeiner@gmail.com> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Michal Simek <michal.simek@xilinx.com> Cc: Ramon Fried <rfried.dev@gmail.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
Currently file transfers are done using tftp or NFS both
over udp. This requires a request to be sent from client
(u-boot) to the boot server.
The current standard is TCP with selective acknowledgment.
Signed-off-by: Duncan Hare <DH@Synoia.com> Signed-off-by: Duncan Hare <DuncanCHare@yahoo.com> Signed-off-by: Ying-Chun Liu (PaulLiu) <paul.liu@linaro.org> Reviewed-by: Simon Glass <sjg@chromium.org> Cc: Christian Gmeiner <christian.gmeiner@gmail.com> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Michal Simek <michal.simek@xilinx.com> Cc: Ramon Fried <rfried.dev@gmail.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
Rasmus Villemoes [Mon, 17 Oct 2022 07:52:51 +0000 (09:52 +0200)]
net: deal with fragment-overlapping-two-holes case
With a suitable sequence of malicious packets, it's currently possible
to get a hole descriptor to contain arbitrary attacker-controlled
contents, and then with one more packet to use that as an arbitrary
write vector.
While one could possibly change the algorithm so we instead loop over
all holes, and in each hole puts as much of the current fragment as
belongs there (taking care to carefully update the hole list as
appropriate), it's not worth the complexity: In real, non-malicious
scenarios, one never gets overlapping fragments, and certainly not
fragments that would be supersets of one another.
So instead opt for this simple protection: Simply don't allow the
eventual memcpy() to write beyond the last_byte of the current hole.
Rasmus Villemoes [Fri, 14 Oct 2022 17:43:42 +0000 (19:43 +0200)]
net: tftp: sanitize tftp block size, especially for TX
U-Boot does not support IP fragmentation on TX (and unless
CONFIG_IP_DEFRAG is set, neither on RX). So the blocks we send must
fit in a single ethernet packet.
Currently, if tftpblocksize is set to something like 5000 and I
tftpput a large enough file, U-Boot crashes because we overflow
net_tx_packet (which only has room for 1500 bytes plus change).
Similarly, if tftpblocksize is set to something larger than what we
can actually receive (e.g. 50000, with NET_MAXDEFRAG being 16384), any
tftp get just hangs because we never receive any packets.
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
Rasmus Villemoes [Fri, 14 Oct 2022 17:43:41 +0000 (19:43 +0200)]
net: tftp: use IS_ENABLED(CONFIG_NET_TFTP_VARS) instead of #if
Nothing inside this block depends on NET_TFTP_VARS to be set to parse
correctly. Switch to C if() in preparation for adding code before
this (to avoid a declaration-after-statement warning).
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
[trini: Update to cover CONFIG_TFTP_PORT case as well] Signed-off-by: Tom Rini <trini@konsulko.com>
Rasmus Villemoes [Fri, 14 Oct 2022 17:43:40 +0000 (19:43 +0200)]
net: fix ip_len in reassembled IP datagram
For some reason, the ip_len field in a reassembled IP datagram is set
to just the size of the payload, but it should be set to the value it
would have had if the datagram had never been fragmented in the first
place, i.e. size of payload plus size of IP header.
That latter value is currently returned correctly via the "len"
variable. And before entering net_defragment(), len does have the
value ntohs(ip->ip_len), so if we're not dealing with a
fragment (so net_defragment leaves *len alone), that relationship of
course also holds after the net_defragment() call.
The only use I can find of ip->ip_len after the net_defragment call is
the ntohs(ip->udp_len) > ntohs(ip->ip_len) sanity check - none of the
functions that are passed the "ip" pointer themselves inspect ->ip_len
but instead use the passed len.
But that sanity check is a bit odd, since the RHS really should be
"ntohs(ip->ip_len) - 20", i.e. the IP payload size.
Now that we've fixed things so that len == ntohs(ip->ip_len) in all
cases, change that sanity check to use len-20 as the RHS.
Rasmus Villemoes [Fri, 14 Oct 2022 17:43:39 +0000 (19:43 +0200)]
net: (actually/better) deal with CVE-2022-{30790,30552}
I hit a strange problem with v2022.10: Sometimes my tftp transfer
would seemingly just hang. It only happened for some files. Moreover,
changing tftpblocksize from 65464 to 65460 or 65000 made it work again
for all the files I tried. So I started suspecting it had something to
do with the file sizes and in particular the way the tftp blocks get
fragmented and reassembled.
v2022.01 showed no problems with any of the files or any value of
tftpblocksize.
Looking at what had changed in net.c or tftp.c since January showed
only one remotely interesting thing, b85d130ea0ca.
So I fired up wireshark on my host to see if somehow one of the
packets would be too small. But no, with both v2022.01 and v2022.10,
the exact same sequence of packets were sent, all but the last of size
1500, and the last being 1280 bytes.
But then it struck me that 1280 is 5*256, so one of the two bytes
on-the-wire is 0 and the other is 5, and when then looking at the code
again the lack of endianness conversion becomes obvious. [ntohs is
both applied to ip->ip_off just above, as well as to ip->ip_len just a
little further down when the "len" is actually computed].
IOWs the current code would falsely reject any packet which happens to
be a multiple of 256 bytes in size, breaking tftp transfers somewhat
randomly, and if it did get one of those "malicious" packets with
ip_len set to, say, 27, it would be seen by this check as being 6912
and hence not rejected.
====
Now, just adding the missing ntohs() would make my initial problem go
away, in that I can now download the file where the last fragment ends
up being 1280 bytes. But there's another bug in the code and/or
analysis: The right-hand side is too strict, in that it is ok for the
last fragment not to have a multiple of 8 bytes as payload - it really
must be ok, because nothing in the IP spec says that IP datagrams must
have a multiple of 8 bytes as payload. And comments in the code also
mention this.
To fix that, replace the comparison with <= IP_HDR_SIZE and add
another check that len is actually a multiple of 8 when the "more
fragments" bit is set - which it necessarily is for the case where
offset8 ends up being 0, since we're only called when
(ip_off & (IP_OFFS | IP_FLAGS_MFRAG)).
====
So, does this fix CVE-2022-30790 for real? It certainly correctly
rejects the POC code which relies on sending a packet of size 27 with
the MFRAG flag set. Can the attack be carried out with a size 27
packet that doesn't set MFRAG (hence must set a non-zero fragment
offset)? I dunno. If we get a packet without MFRAG, we update
h->last_byte in the hole we've found to be start+len, hence we'd enter
one of
/* overlaps with initial part of the hole: move this hole */
newh = thisfrag + (len / 8);
/* fragment sits in the middle: split the hole */
newh = thisfrag + (len / 8);
IOW these division are now guaranteed to be exact, and thus I think
the scenario in CVE-2022-30790 cannot happen anymore.
====
However, there's a big elephant in the room, which has always been
spelled out in the comments, and which makes me believe that one can
still cause mayhem even with packets whose payloads are all 8-byte
aligned:
This code doesn't deal with a fragment that overlaps with two
different holes (thus being a superset of a previously-received
fragment).
Suppose each character below represents 8 bytes, with D being already
received data, H being a hole descriptor (struct hole), h being
non-populated chunks, and P representing where the payload of a just
received packet should go:
DDDHhhhhDDDDHhhhDDDD
PPPPPPPPP
I'm pretty sure in this case we'd end up with h being the first hole,
enter the simple
} else if (h->last_byte <= start + len) {
/* overlaps with final part of the hole: shorten this hole */
h->last_byte = start;
case, and thus in the memcpy happily overwrite the second H with our
chosen payload. This is probably worth fixing...
Rasmus Villemoes [Fri, 14 Oct 2022 17:43:38 +0000 (19:43 +0200)]
net: compare received length to sizeof(ip_hdr), not sizeof(ip_udp_hdr)
While the code mostly/only handles UDP packets, it's possible for the
last fragment of a fragmented UDP packet to be smaller than 28 bytes;
it can be as small as 21 bytes (an IP header plus one byte of
payload). So until we've performed the defragmentation step and thus
know whether we're now holding a full packet, we should only check for
the existence of the fields in the ip header, i.e. that there are at
least 20 bytes present.
In practice, we always seem to be handed a "len" of minimum 60 from the
device layer, i.e. minimal ethernet frame length minus FCS, so this is
mostly theoretical.
After we've fetched the header's claimed length and used that to
update the len variable, check that the header itself claims to be the
minimal possible length.
This is probably how CVE-2022-30552 should have been dealt with in the
first place, because net_defragment() is not the only place that wants
to know the size of the IP datagram payload: If we receive a
non-fragmented ICMP packet, we pass "len" to receive_icmp() which in
turn may pass it to ping_receive() which does
compute_ip_checksum(icmph, len - IP_HDR_SIZE)
and due to the signature of compute_ip_checksum(), that would then
lead to accessing ~4G of address space, very likely leading to a
crash.
Marek Vasut [Sun, 9 Oct 2022 15:51:46 +0000 (17:51 +0200)]
net: dwc_eth_qos: Add support for bulk RX descriptor cleaning
Add new desc_per_cacheline property which lets a platform run RX descriptor
cleanup after every power-of-2 - 1 received packets instead of every packet.
This is useful on platforms where (axi_bus_width EQOS_AXI_WIDTH_n * DMA DSL
inter-descriptor word skip count + DMA descriptor size) is less than cache
line size, which necessitates packing multiple DMA descriptors into single
cache line.
In case of TX descriptors, this is not a problem, since the driver always
does synchronous TX, i.e. the TX descriptor is always written, flushed and
polled for completion in eqos_send().
In case of RX descriptors, it is necessary to update their status in bulk,
i.e. after the entire cache line worth of RX descriptors has been used up
to receive data.
Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
Sean Anderson [Sun, 27 Nov 2022 14:31:55 +0000 (15:31 +0100)]
usb: dwc3: Program GFLADJ
GUCTL.REFCLKPER can only account for clock frequencies with integer
periods. To address this, program REFCLK_FLADJ with the relative error
caused by period truncation. The formula given in the register reference
has been rearranged to allow calculation based on rate (instead of
period), and to allow for fixed-point arithmetic.
Additionally, calculate a value for 240MHZDECR. This configures a
simulated 240Mhz clock using a counter with one fractional bit (PLS1).
This register is programmed only for versions >= 2.50a, since this is
the check also used by commit db2be4e9e30c ("usb: dwc3: Add frame length
adjustment quirk").
[ marek: Ported from Linux kernel commit 596c87856e08d ("usb: dwc3: Program GFLADJ") ]
Reviewed-by: Sean Anderson <seanga2@gmail.com> Signed-off-by: Sean Anderson <sean.anderson@seco.com> Signed-off-by: Marek Vasut <marex@denx.de> # Port from Linux
Sean Anderson [Sun, 27 Nov 2022 14:31:54 +0000 (15:31 +0100)]
usb: dwc3: Calculate REFCLKPER based on reference clock
Instead of using a special property to determine the reference clock
period, use the rate of the reference clock. When we have a legacy
snps,ref-clock-period-ns property and no reference clock, use it
instead. Fractional clocks are not currently supported, and will be
dealt with in the next commit.
[ marek: Ported from Linux kernel commit 5114c3ee24875 ("usb: dwc3: Calculate REFCLKPER based on reference clock") ]
Reviewed-by: Sean Anderson <seanga2@gmail.com> Signed-off-by: Sean Anderson <sean.anderson@seco.com> Signed-off-by: Marek Vasut <marex@denx.de> # Port from Linux
Set reference clock period when it differs from dwc3 default hardware
set.
We could calculate clock period based on reference clock frequency. But
this information is not always available. This is the case of PCI bus
attached USB host. For that reason we use a custom property.
Tested (USB2 only) on IPQ6010 SoC based board with 24 MHz reference
clock while hardware default is 19.2 MHz.
[ baruch: rewrite commit message; drop GFLADJ code; remove 'quirk-' from
property name; mention tested hardware ]
[ marek: Ported from Linux kernel commit 7bee318838890 ("usb: dwc3: reference clock period configuration") ]
Reviewed-by: Sean Anderson <seanga2@gmail.com> Signed-off-by: Balaji Prakash J <bjagadee@codeaurora.org> Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Marek Vasut <marex@denx.de> # Port from Linux
Marek Vasut [Sun, 27 Nov 2022 14:31:52 +0000 (15:31 +0100)]
usb: dwc3: Cache ref_clk pointer in struct dwc3
Cache ref_clk clock pointer in struct dwc3 . This is a preparatory
patch for subsequent backports from Linux kernel which configure
GFLADJ register content based on the ref_clk rate and therefore need
access to the ref_clk pointer.
It is possible to extract the clock pointer from existing clk_bulk
list of already claimed clock, no need to call clk_get*() again.
Reviewed-by: Sean Anderson <seanga2@gmail.com> Signed-off-by: Marek Vasut <marex@denx.de>
Marek Vasut [Sat, 26 Nov 2022 12:57:53 +0000 (13:57 +0100)]
usb: Expand buffer size in usb_find_and_bind_driver()
The "generic_bus_%x_dev_%x" string which is printed into this buffer
can be up to 34 characters long ("generic_bus_12345678_dev_12345678").
The buffer would be clipped by snprintf() if both %x were at maximum
range. Make sure the buffer is long enough to cover such possibility.
Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
John Keeping [Wed, 23 Nov 2022 17:16:14 +0000 (17:16 +0000)]
cmd: fix dependency for CMD_CLS
It seems this symbol was missed when renaming DM_VIDEO -> VIDEO. Update
it.
Fixes: b86986c7b3 ("video: Rename CONFIG_DM_VIDEO to CONFIG_VIDEO") Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: John Keeping <john@metanate.com>
Tom Rini [Mon, 21 Nov 2022 17:52:40 +0000 (12:52 -0500)]
CI: Make more use of git safe.directory
We have a number of jobs that will have git complain about needing to
set safe.directory and this being untrue as a fatal error, but then
complete. Set this flag correctly now as it should be used, and may
prevent a future failure.
Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
4. Read and write termination
- change RTT_ROM from 40 ohm to 48 ohm (MR1[10:8])
- change RTT_PARK from disable to 48 ohm (MR5[8:6])
- change RTT_WR from 120 ohm to disable (MR2[11:9])
- change PHY ODT from 40 ohm to 80 ohm (0x1e6e0130[10:8])
Note1: Both DDR-PHY and DDR controller have their own registers for DDR4
Mode Registers (MR0~MR6). This patch introduces macros to synchronize
the MR value on both sides.
Note2: the waveform meansurement can be found in item #21 of Aspeed
AST26x0 Application note (AP note).
Review-by: Ryan Chen <ryan_chen@aspeedtech.com> Signed-off-by: Dylan Hung <dylan_hung@aspeedtech.com>
Dylan Hung [Fri, 11 Nov 2022 07:30:06 +0000 (15:30 +0800)]
ram: ast2600: Fix incorrect statement of the register polling
The condition "~data" in the if-statement is a typo. The original
intention is to poll if SDRAM_PHYCTRL0_INIT bit equals to 0. So use
"data == 0" for instead.
Besides, the bit[1] of "phy_status" register is hardwired to
SDRAM_PHYCTRL0_INIT (with inverse logic). Since SDRAM_PHYCTRL0_INIT has
already done, remove the unnecessary checking of phy_status[1].
Fixes: fde93143469f ("ram: aspeed: Add AST2600 DRAM control support") Review-by: Ryan Chen <ryan_chen@aspeedtech.com> Signed-off-by: Dylan Hung <dylan_hung@aspeedtech.com>
Marek Vasut [Mon, 7 Nov 2022 00:56:04 +0000 (01:56 +0100)]
tools: mkenvimage: Drop duplicate crc header include
This header was already included just above version.h,
do not include it twice.
Fixes: 3db71108575 ("crc32: Use the crc.h header for crc functions") Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
Pali Rohár [Sun, 7 Aug 2022 19:58:56 +0000 (21:58 +0200)]
cmd: ubifs: Do not show usage when command fails
Return value -1 cause U-Boot to print usage message. Return value
1 (CMD_RET_FAILURE) indicates failure. So fix return value when ubifs
command starts it execution and fails.
Pali Rohár [Sun, 7 Aug 2022 19:27:09 +0000 (21:27 +0200)]
ubifs: Allow to silence debug dumps
Debug dump logs are not always required. Add a new config option
UBIFS_SILENCE_DEBUG_DUMP to silence all debug dumps. On powerpc/mpc85xx
when enabled this will decrease size of U-Boot binary by 11 kB.
Signed-off-by: Pali Rohár <pali@kernel.org> Tested-by: Tony Dinh <mibodhi@gmail.com>
Marek Vasut [Mon, 14 Nov 2022 21:49:59 +0000 (22:49 +0100)]
cmd: fdt: Fix iteration over elements above index 1 in fdt get
Always increment both the iterator and pointer into the string
property value by length of the current element + 1 (to cater
for the string delimiter), otherwise the element extracted from
the string property value would be extracted from an offset that
is multiple of the length of the first element, instead of sum
of element lengths until select index.
This fixes 'fdt get value' operation for index above 1 (counting
from index 0).
Acked-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Fixes: 13982ced2cc ("cmd: fdt: Add support for reading stringlist property values") Signed-off-by: Marek Vasut <marex@denx.de>
Tom Rini [Thu, 10 Nov 2022 02:14:50 +0000 (19:14 -0700)]
global: Do not default to faking missing binaries for buildman
While it is possible and documented on how to re-run buildman to replace
faked required binary files after the fact, this behavior ends up being
more confusing than helpful in practice. Switch to requiring
BINMAN_ALLOW_MISSING=1 to be passed on the 'make' line to enable this
behavior.
Cc: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com> Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Thu, 10 Nov 2022 02:14:49 +0000 (19:14 -0700)]
binman: Add a separate section about environment variables
These are documented in various several sections. Add a new section that
mentions them all in one place so it is easier to see what environment
variables can be used to control U-Boot's use of binman.
Signed-off-by: Simon Glass <sjg@chromium.org> Suggested-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
projects / u-boot.git / log