Sean Anderson [Thu, 5 Sep 2024 17:18:32 +0000 (13:18 -0400)]
zynqmp: Disable secure access for boot devices
Boot devices (QSPI, MMC, NAND, and Ethernet) use secure access for DMA
by default. As this causes problems when using the SMMU [1], configure
them for normal access instead.
Michal Simek [Tue, 3 Sep 2024 07:48:15 +0000 (09:48 +0200)]
xilinx: Enable SIMPLE_PM_BUS
Enable simple-pm-bus driver to handle case where axi bus coming between PS
(fixed) part to PL (programmable) part has own clock or power domain.
That's why enable driver to be ready for this configuration.
Prasad Kummari [Tue, 27 Aug 2024 11:55:30 +0000 (17:25 +0530)]
arm64: zynqmp: Add u-boot command to boot into recovery image
To boot into the firmware recovery tool, the user currently
needs to press a button on the board while powering the
system up. To simplify this process, a U-Boot command
was added to allow booting directly into the recovery tool.
For example:
ZynqMP> zynqmp reboot <multiboot offset in hex>
xilinx: versal-net: fix no previous prototype for function warning.
Included the SPI header to resolve the no previous prototypes
for function. Removed unused mode variable.
sparse warnings
warning: no previous prototype for 'spi_get_env_dev'
[-Wmissing-prototypes]
warning: variable 'mode' set but not used
[-Wunused-but-set-variable]
mtd: spi-nor: scale up timeout for full-chip erase
This patch fixes timeout issues seen on large NOR flash.
For full-chip erase, where we use the SPINOR_OP_CHIP_ERASE (0xc7)
opcode. Use a different timeout for full-chip erase than for other
commands.
[Ported from Linux kernel commit 09b6a377687b ("mtd: spi-nor: scale up timeout for
full-chip erase") ]
- Several updates to i.MX9 SOC and i.MX93 EVK.
- Power domain fixes.
- TRDC cleanup and update.
- MAC address layout update.
- Add support for the i.MX9301/9302 variants.
- Add runtime detection of voltage mode.
- Generalize some code for i.MX8M and i.MX9.
- Add support for Comvetia imx6q-lxr board.
Tom Rini [Thu, 19 Sep 2024 17:25:26 +0000 (11:25 -0600)]
Merge tag 'fwu-next-19092024' of https://source.denx.de/u-boot/custodians/u-boot-tpm into next
This PR contains various improvements in the A/B update logic for EFI
- Read both copies of metadata, in case one of the is corrupted
- Check the metadata version against the running firmware to make sure it's
allowed
- Limit the use of a revert capsule if the board is on a trial state and
make sure it's not applied if the max counter has expired
When dealing with processing of the empty capsule, the capsule gets
applied only when the checks for the empty capsule pass. Print a
message to highlight if empty capsule checks fail, and return an error
value, similar to the normal capsules.
fwu: do not allow capsule processing on exceeding Trial Counter threshold
When in Trial State, the platform keeps a count of the number of times
it has booted in the Trial State. Once the threshold of the maximum
allowed count exceeds, the platform reverts to boot from a different
bank on subsequent boot, thus coming out of the Trial State. It is
expected that all the updated images would be accepted or rejected
while the platform is in Trial State. Put in checks so that it is not
possible to apply an empty capsule once the max Trial Count exceeds.
fwu: add dependency checks for selecting FWU metadata version
The FWU code supports both versions of the FWU metadata, i.e. v1 and
v2. A platform can then select one of the two versions through a
config symbol. Put a dependency in the FWU metadata version selection
config symbol to ensure that both versions of the metadata cannot be
enabled.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org> Reviewed-by: Michal Simek <michal.simek@amd.com> Tested-by: Michal Simek <michal.simek@amd.com> Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
fwu: check all images for transitioning out of Trial State
The platform transitions out of Trial State into the Regular State
only when all the images in the update bank have been accepted. Check
for this condition before transitioning out of Trial State.
Do a sanity check that the version of the FWU metadata that has been
read aligns with the version enabled in the image. This allows to
indicate an early failure as part of the FWU module initialisation.
In the version 2 of the FWU metadata, the metadata is broken into two
parts, a top-level structure, which provides information on the total
size of the structure among other things. Try reading the primary
partition first, and if that fails, try reading the secondary
partition. This will help in the scenario where the primary metadata
partition has been corrupted, but the secondary partition is intact.
After it gets accepted in mainline (most likely in kernel 6.13),
the lxr2 board can then be switched to OF_UPSTREAM and these device trees
can be removed from U-Boot.
Peng Fan [Thu, 19 Sep 2024 04:01:38 +0000 (12:01 +0800)]
imx93_evk: Remove CONFIG_IMX9_LOW_DRIVE_MODE and ld defconfig
Remove unused CONFIG_IMX9_LOW_DRIVE_MODE kconfig and
imx93_11x11_evk_ld_defconfig.
Remove the ld timing file.
The LD mode support will be added back with runtime detection later.
Peng Fan [Thu, 19 Sep 2024 04:01:37 +0000 (12:01 +0800)]
imx93_evk: spl: update pmic settings
1. Use runtime voltage selection for LD/OD/ND mode.
2. According to latest PE/TE report, the voltages of VDD_SOC for
LD and ND mode need add 50mv margin, so LD voltage is 0.75v->0.8v,
ND voltage is 0.8v->0.85v.
3. Use TOFF_DEB to differentiate new trimmed pmic and old pmic
Ye Li [Thu, 19 Sep 2024 04:01:33 +0000 (12:01 +0800)]
imx93: Add Low performance parts 9302/9301 support
Add support for iMX93 low performance parts 9302 and 9301 which
restrict to low drive voltage only.
The parts run A55 max speed at 900Mhz and M33 at 133Mhz, have NPU
and A55 core1 (9301) disabled.
Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
Peng Fan [Thu, 19 Sep 2024 04:01:31 +0000 (12:01 +0800)]
imx: Generalize disable_cpu_nodes
disable_cpu_nodes could be reused by i.MX9, so move disable_cpu_nodes
out from mach-imx/imx8m/soc.c to mach-imx/fdt.c and update
disable_cpu_nodes to make it easy to support different socs.
Peng Fan [Thu, 19 Sep 2024 04:01:30 +0000 (12:01 +0800)]
imx8m: soc: Drop disable_pmu_cpu_nodes
i.MX8M use PPI for PMU interrupts, there is no reason to update
interrupt-affinity for PMU even interrupt-affinity was wrongly added
to device tree before.
Jacky Bai [Thu, 19 Sep 2024 04:01:28 +0000 (12:01 +0800)]
imx9: soc: Mask the wdog reset in src by default on i.mx9
Normally, the wdog will be used for trigger external PMIC reset
through the WDOG_ANY pin. If the PMIC chip has debounce logic for
the reset signal, in some corner case the wdog can NOT trigger
external PMIC reset if the SoC has been reset internal before the
PMIC captures the WDOG_ANY pin reset, so need to keep the WDOG3-5
reset masked in the SRC to let the PMIC to do the reset safely.
Reviewed-by: Ye Li <ye.li@nxp.com> Signed-off-by: Jacky Bai <ping.bai@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
Ye Li [Thu, 19 Sep 2024 04:01:27 +0000 (12:01 +0800)]
imx9: clock: Update clock init function and sequence
Since we use SPEED GRADE fuse to set A55 frequency, remove the
set_arm_core_low_drive_clk function which has hard coded frequency.
And adjust clock_init called sequence and split it to early and late
functions.
Set the authen register in early function, because CCF driver checks
NS bit.
Set bus and core clock in late function, because the fuse read and
SoC type/rev depend on ELE.
Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
Ye Li [Thu, 19 Sep 2024 04:01:26 +0000 (12:01 +0800)]
imx9: soc: Add function to get target voltage mode
Replace the static CONFIG_IMX9_LOW_DRIVE_MODE with runtime target
voltage mode by checking the part's SPEED GRADE fuse.
SPL will configure to highest A55 speed which is indicated by the SPEED
fuse and select corresponding voltage mode.
Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
Ye Li [Thu, 19 Sep 2024 04:01:20 +0000 (12:01 +0800)]
imx9: soc: Configure TRDC for M33 TCM access
On OSCCA part, M33 TCM is used for ROM PATCH and protected by ELE ROM.
So after release TRDC, we need to configure TRDC for M33 TCM,
otherwise A55 can't access the TCM.
Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Ye Li <ye.li@nxp.com>
Tom Rini [Wed, 18 Sep 2024 19:07:19 +0000 (13:07 -0600)]
Merge patch series "Fix various bugs"
Simon Glass <sjg@chromium.org> says:
This series includes the patches needed to make make the EFI 'boot' test
work. That test has now been split off into a separate series along with
the EFI patches.
This series fixes these problems:
- sandbox memory-mapping conflict with PCI
- the fix for that causes the mbr test to crash as it sets up pointers
instead of addresses for its 'mmc' commands
- the mmc and read commands which cast addresses to pointers
- a tricky bug to do with USB keyboard and stdio
- a few other minor things
Simon Glass [Sun, 1 Sep 2024 22:26:32 +0000 (16:26 -0600)]
test: mbr: Use a constant for the block size
It isn't that important to factor out constants in tests, but in this
case we have 0x200 and 512 used. The commands don't use the constant
as they use a block count ('1'). It doesn't create more code to use a
constant, so create one.
Simon Glass [Sun, 1 Sep 2024 22:26:31 +0000 (16:26 -0600)]
test: mbr: Unmap the buffers after use
This tests maps some local variables into sandbox's address space. Make
sure to unmap them afterwards.
Note that the normal approach with sandbox is to use a fixed memory
address in the RAM, to avoid needing to create a map for transient local
variables.
Signed-off-by: Simon Glass <sjg@chromium.org> Fixes: 04291ee0aba ("cmd: mbr: Allow 4 MBR partitions without need...")
Simon Glass [Sun, 1 Sep 2024 22:26:25 +0000 (16:26 -0600)]
sandbox: Unmap old tags
So far unmapping has not been implemented. This means that if one test
maps a pointer to an address with map_sysmem(), then a second test can
use that same pointer, by mapping the address back to a pointer with
map_to_sysmem(). This is not really desirable, even if it doesn't
cause any problems at the moment.
Simon Glass [Sun, 1 Sep 2024 22:26:23 +0000 (16:26 -0600)]
sandbox: Change the range used for memory-mapping tags
Sandbox keeps a table of addresses which map to pointers which are
outside its emulated DRAM. The current range from 10000000 conflicts
with the PCI range, meaning that if PCI mapping is on, that particular
address can be decoded by PCI instead of the table.
Fix this by moving the range up to the top of memory. Update the docs
while we are here.
Simon Glass [Sun, 1 Sep 2024 22:26:22 +0000 (16:26 -0600)]
test: mbr: Adjust test to drop 0x
U-Boot commands typically don't need 0x to specify hex, since they use
hex by default. Adding 0x in this test is confusing since it suggests
that it is necessary. Drop it from the file.
Also use the %#x construct to get the 0x when needed.
Simon Glass [Sun, 1 Sep 2024 22:26:20 +0000 (16:26 -0600)]
dm: usb: Deal with USB keyboard persisting across tests
Clear any USB-keyboard devices before running a unit test, to avoid
using a stale udevice pointer in stdio. Add a long comment to explain
this situation and why this solution seems best, at least for now.
Tomas Paukrt [Mon, 2 Sep 2024 18:49:17 +0000 (20:49 +0200)]
cmd: mmc: Allow using partition name in mmc erase command
The mmc erase command currently requires blk# and cnt parameters
which can be obtained using the part start and part size commands
if the entire partition needs to be erased.
Simplify the use of the mmc erase command by allowing the partition
name to be specified directly.
Signed-off-by: Tomas Paukrt <tomaspaukrt@email.cz> Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Marek Vasut [Mon, 2 Sep 2024 13:37:09 +0000 (15:37 +0200)]
mmc: Hide mmc speed command under mmc command
The mmc speed command configuration option keeps showing up in
Kconfig directly in 'Command line interface'. Move MMC_SPEED_MODE_SET
under CMD_MMC to make it show up alongside the MMC command.
Tom Rini [Mon, 26 Aug 2024 17:01:40 +0000 (11:01 -0600)]
doc/develop/sending_patches.rst: Reword where our git tree is slightly
We shouldn't have had the link to our git tree be contained within "``"
as that meant that it did not work as a link, so remove those. And
rather than make this a link plus text, keep this as a link within the
text for overall clarity.
Suggested-by: Quentin Schulz <quentin.schulz@cherry.de> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de> Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Fri, 13 Sep 2024 19:44:00 +0000 (13:44 -0600)]
Merge patch series "Bump new hush commits and fix old hush test behavior"
Francis Laniel <francis.laniel@amarulasolutions.com> says:
Hi!
With this series, I bumped the new hush to get the latest commits from upstream.
Also, I added back a reverted commit which goal was to fix a bad behavior in
old hush test.
I had to tweak a bit this commit, but everything worked both locally and in the
CI.
Francis Laniel [Tue, 3 Sep 2024 17:09:43 +0000 (19:09 +0200)]
cli: modern_hush: Add upstream commits up to 13 July 2024
This commit adds the following hush busybox upstream commits: 23da5c4b716b ("hush: do not exit interactive shell on some redirection errors") 14e28c18ca1a ("hush: fix "exec 3>FILE" aborting if 3 is exactly the next free fd") 6c38d0e9da2d ("hush: avoid duplicate fcntl(F_SETFD, FD_CLOEXEC) during init") 758b21402abc ("hush: detect when terminating "done"/"fi" is missing") 2639f3bc72ac ("hush: set G.ifs sooner (prevents segfault)")
Adding specific ifdef and endif guard was needed for 2639f3bc72ac.
Signed-off-by: Francis Laniel <francis.laniel@amarulasolutions.com>
Ion Agorria [Tue, 3 Sep 2024 17:09:42 +0000 (19:09 +0200)]
test: hush: dollar: fix bugous behavior
The dollar test was merged with bugous console behavior, and
instead of fixing it, this behavior was just workarounded.
This was done to keep compatibility with the existing behavior.
It seems like without the fix the ut_assert_skipline(); didn't clear
console and running ut_assert_skipline(); many times would give always
OK. With e58bafc35fe3 ("lib: membuff: fix readline not returning line in case of overflow")
the line is cleared correctly and next assert fails because now there
is nothing to clean which is correct if we look the this a bit above
the failing assert:
if (gd->flags & GD_FLG_HUSH_MODERN_PARSER) {
/*
* For some strange reasons, the console is not empty after
* running above command.
* So, we reset it to not have side effects for other tests.
*/
console_record_reset_enable();
} else if (gd->flags & GD_FLG_HUSH_OLD_PARSER) {
ut_assert_console_end();
}
Which further confirms that tests workaround the old problem and now
that problem is fixed we can remove the whole if blocks and simply
place ut_assert_console_end() right after ut_assert_skipline() without
any conditional and will pass green.
So this part of code goes from:
ut_assert_skipline();
ut_assert_skipline();
if (gd->flags & GD_FLG_HUSH_MODERN_PARSER) {
/* See above comments. */
console_record_reset_enable();
} else if (gd->flags & GD_FLG_HUSH_OLD_PARSER) {
ut_assert_console_end();
}
to become:
ut_assert_skipline();
if (gd->flags & GD_FLG_HUSH_OLD_PARSER) {
ut_assert_skipline();
}
ut_assert_console_end();
The if block mentioned above that calls console_record_reset_enable() is
completely removed as fixed by e58bafc35fe3.
* Use generated UUIDs in UEFI capsules:
- efi: define struct efi_guid
- lib: uuid: add UUID v5 support
- efi: add a helper to generate dynamic UUIDs
- doc: uefi: document dynamic UUID generation
- sandbox: switch to dynamic UUIDs
- lib: uuid: supporting building as part of host tools
- include: export uuid.h
- tools: mkeficapsule: use u-boot UUID library
- tools: mkeficapsule: support generating dynamic GUIDs
- test: lib/uuid: add unit tests for dynamic UUIDs
- test: lib/uuid: add tests for UUID version/variant bits
* Minor code clean-up
- shorten efi_bootmgr_release_uridp_resource()
- rename efi_bootmgr_image_return_notify
- return the correct error in efi_bootmgr_release_uridp()
- Kconfig: clean up the efi configuration status
- Use puts() in cout so that console recording works
- Put back copyright message in helloworld.c
Tom Rini [Fri, 13 Sep 2024 14:18:54 +0000 (08:18 -0600)]
Merge tag 'doc-2024-10-rc4' of https://source.denx.de/u-boot/custodians/u-boot-efi
Pull request doc-2024-10-rc4
* doc/develop/sending_patches.rst: Clarify when to use which branch
* doc/arch/m68k.rst: Update toolchain comment
* doc/arch/mips.rst: Update toolchain list
* doc: Update rST to not reference the old wiki
* doc/mkeficapsule.1: Update homepage link
* bootcount: Update to point to current documentation
* binman: Update links for sending patches
Tom Rini [Mon, 26 Aug 2024 16:49:54 +0000 (10:49 -0600)]
doc: Update rST to not reference the old wiki
In two places we had references to the old wiki pages instead of links
to the relevant part of our documentation. Update (and slightly reword)
these spots.
Tom Rini [Mon, 26 Aug 2024 16:39:17 +0000 (10:39 -0600)]
doc/develop/sending_patches.rst: Clarify when to use which branch
The previous wording on the paragraph about what branch to use when
submitting patches did not reflect how / when the next branch is
currently used. Reword this to note that master should be used for bug
and regression fixes, always, and that next should be used once it
opens, with -rc2.
Reported-by: Jerome Forissier <jerome.forissier@linaro.org> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de> Acked-by: Jerome Forissier <jerome.forissier@linaro.org> Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Simon Glass [Mon, 2 Sep 2024 01:18:12 +0000 (19:18 -0600)]
efi_loader: Use puts() in cout so that console recording works
At present EFI output to the console uses fputs() which bypasses the
console-recording feature. This makes it impossible for tests to check
the output of an EFI app.
There doesn't seem to be any need to do this bypass, so adjust it to
simply use the puts() function.
Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Caleb Connolly [Fri, 30 Aug 2024 12:34:40 +0000 (13:34 +0100)]
test: lib/uuid: add unit tests for dynamic UUIDs
Add some basic unit tests to validate that the UUID generation behaves
as expected. This matches the implementation in efi_loader for sandbox
and a Qualcomm board and should catch any regressions.
Caleb Connolly [Fri, 30 Aug 2024 12:34:39 +0000 (13:34 +0100)]
tools: mkeficapsule: support generating dynamic GUIDs
Add support for generating GUIDs that match those generated internally
by U-Boot for capsule update fw_images when using dynamic UUIDs.
Dynamic UUIDs in U-Boot work by taking a namespace UUID and hashing it
with the board compatible and fw_image name. This feature just provides
a way to determine the UUIDs for a particular board without having to
actually boot U-Boot on it.
Caleb Connolly [Fri, 30 Aug 2024 12:34:35 +0000 (13:34 +0100)]
sandbox: switch to dynamic UUIDs
Migrate sandbox over to generating it's capsule update image GUIDs
dynamically from the namespace and board/image info. Update the
reference and tests to use the new GUIDs.
Caleb Connolly [Fri, 30 Aug 2024 12:34:33 +0000 (13:34 +0100)]
efi: add a helper to generate dynamic UUIDs
Introduce a new helper efi_capsule_update_info_gen_ids() which populates
the capsule update fw images image_type_id field. This allows for
determinstic UUIDs to be used that can scale to a large number of
different boards and board variants without the need to maintain a big
list.
We call this from efi_fill_image_desc_array() to populate the UUIDs
lazily on-demand.
Caleb Connolly [Fri, 30 Aug 2024 12:34:32 +0000 (13:34 +0100)]
lib: uuid: add UUID v5 support
Add support for generating version 5 UUIDs, these are determistic and work
by hashing a "namespace" UUID together with some unique data. One intended
usecase is to allow for dynamically generate payload UUIDs for UEFI
capsule updates, so that supported boards can have their own UUIDs
without needing to hardcode them.
In addition, move the common bit twiddling code from gen_ran_uuid into a
separate function and rewrite it not to use clrsetbits (which is not
available when building as part of host tools).
Ilias Apalodimas [Fri, 30 Aug 2024 11:45:27 +0000 (14:45 +0300)]
Kconfig: clean up the efi configuration status
The EFI_LOADER and EFI config options are randomly scattered under lib/
making it cumbersome to navigate and enable options, unless you really
know what you are doing. On top of that the existing options are in
random order instead of a logical one.
So let's move things around a bit and move them under boot/. Present a
generic UEFI entry where people can select Capsules, Protocols,
Services, and an option to compile U-Boot as an EFI for X86
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Reviewed-by: Simon Glass <sjg@chromium.org>
Ilias Apalodimas [Mon, 12 Aug 2024 20:56:38 +0000 (23:56 +0300)]
efi_loader: return the correct error in efi_bootmgr_release_uridp()
There's currently a chance for this function to overwrite an error if
one occurred and the subsequent call to
efi_uninstall_multiple_protocol_interfaces() succedded. Although this
is an EFI event and we can't do much let's at least set and return
the correct error
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Reviewed-by: Simon Glass <sjg@chromium.org>
We use this event when returning from an EFI HTTP booted image.
The name is a bit confusing since it suggests we always run it,
rename it to make it clearer
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Reviewed-by: Simon Glass <sjg@chromium.org>
Tom Rini [Thu, 12 Sep 2024 15:03:40 +0000 (09:03 -0600)]
Merge branch 'next' of https://source.denx.de/u-boot/custodians/u-boot-riscv into next
CI result shows no issue:
https://source.denx.de/u-boot/custodians/u-boot-riscv/-/pipelines/22315
----------------------------------------------------------------
- Aspeed: Add AST2700 board (Ibex RISC-V core) support
- Add timer, dram controller, network support
- Sophgo: Add clock controller support for Milk-V Duo
projects / u-boot.git / log