Jan Kiszka [Tue, 17 Oct 2023 05:20:14 +0000 (07:20 +0200)]
board: siemens: iot2050: Fix M.2 detection
The "simpler" the logic, the higher the probability to not test and get
things wrong, again: The absence of a "-PG2" suffix is not sufficient to
derive that we are on PG1. There is also "IOT2050-ADVANCED-M2".
Finally fix that by exactly matching against the two PG1 device names.
While changing this, we can also drop the not really needed check for
!board_is_sr1 in board_is_m2 and call the boards by their names
("board_is_pg1").
Reported-and-tested-by: Bao Cheng Su <baocheng.su@siemens.com> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Marcel Ziswiler [Mon, 28 Aug 2023 21:38:02 +0000 (23:38 +0200)]
board: toradex: verdin-imx8mp: enable usb device and fastboot support
Enable USB device and fastboot support which may be used to load the
Toradex Easy Installer FIT image.
While at it also enable USB mass storage aka UMS support.
Note that the i.MX 8M Plus recovery mode support is based on the USB
boot stage of the BOOTROM and does NOT require USB SDP SPL aka serial
downloader support.
Tom Rini [Fri, 27 Oct 2023 23:27:29 +0000 (19:27 -0400)]
Merge tag 'tpm-next-27102023' of https://source.denx.de/u-boot/custodians/u-boot-tpm
bootX measurements and measurement API moved to u-boot core:
Up to now, U-Boot could perform measurements and EventLog creation as
described by the TCG spec when booting via EFI.
The EFI code was residing in lib/efi_loader/efi_tcg2.c and contained
both EFI specific code + the API needed to access the TPM, extend PCRs
and create an EventLog. The non-EFI part proved modular enough and
moving it around to the TPM subsystem was straightforward.
With that in place we can have a common API for measuring binaries
regardless of the boot command, EFI or boot(m|i|z), and contructing an
EventLog.
I've tested all of the EFI cases -- booting with an empty EventLog and
booting with a previous stage loader providing one and found no
regressions. Eddie tested the bootX part.
Eddie also fixed the sandbox TPM which couldn't be used for the EFI code
and it now supports all the required capabilities. This had a slight
sideeffect in our testing since the EFI subsystem initializes the TPM
early and 'tpm2 init' failed during some python tests. That code only
opens the device though, so we can replace it with 'tpm2 autostart'
which doesn't error out and still allows you to perfom the rest of the
tests but doesn't report an error if the device is already opened.
There's a few minor issues with this PR as well but since testing and
verifying the changes takes a considerable amount of time, I prefer
merging it now.
Heinrich has already sent a PR for -master containing "efi_loader: fix
EFI_ENTRY point on get_active_pcr_banks" and I am not sure if that will
cause any conflicts, but in any case they should be trivial to resolve.
Both the EFI and non-EFI code have a Kconfig for measuring the loaded
Device Tree. The reason this is optional is that we can't reason
when/if devices add random info like kaslr-seed, mac addresses etc in
the DT. In that case measurements are random, board specific and
eventually useless. The reason it was difficult to fix it prior to this
patchset is because the EFI subsystem and thus measurements was brought
up late and DT fixups might have already been applied. With this
patchset we can measure the DT really early in the future.
Heinrich also pointed out that the two Kconfigs for the DTB measurements
can be squashed in a single one and that the documentation only explains
the non-EFI case. I agree on both but as I said this is a sane working
version, so let's pull this first it's aleady big enough and painful to
test.
Tom Rini [Fri, 27 Oct 2023 19:23:21 +0000 (15:23 -0400)]
Merge tag 'efi-2024-01-rc2-2' of https://source.denx.de/u-boot/custodians/u-boot-efi
Pull request efi-2024-01-rc2-2
Documentation:
* Bump urllib3 version
* Replace references to dm_dump_all() with dm_dump_tree()
* Update description of build dependencies for Alpine Linux
* Fix typo in gpt example
* Fix ordering of shell commands
Ilias Apalodimas [Thu, 19 Oct 2023 16:21:55 +0000 (11:21 -0500)]
efi_loader: fix EFI_ENTRY point on get_active_pcr_banks
efi_tcg2_get_active_pcr_banks doesn't immediately call the
EFI_ENTRY() wrapper once it enters the function. Move the call a
few lines above to cover the error cases properly as well.
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Tom Fitzhenry [Tue, 24 Oct 2023 12:03:00 +0000 (23:03 +1100)]
doc: usage: fix ordering of shell commands
I initially didn't find the bootz docs when I went looking for them. :)
Signed-off-by: Tom Fitzhenry <tom@tom-fitzhenry.me.uk> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Dylan Corrales [Thu, 19 Oct 2023 14:02:30 +0000 (10:02 -0400)]
doc: Replace dm_dump_all() with dm_dump_tree()
Replace dm_dump_all() with dm_dump_tree() in driver model documentation,
to reflect changes introduced in commit 145287040480 ("dm: core: Rename
dm_dump_all()").
Tom Rini [Fri, 27 Oct 2023 14:19:17 +0000 (10:19 -0400)]
Merge tag 'u-boot-amlogic-20231027' of https://source.denx.de/u-boot/custodians/u-boot-amlogic
- Fix environment saving for new Android boot features on vim3*_android
- Add SPIFC support for Amlogic A1
- Add DFU RAM boot step when booting over USB
Igor Prusov [Tue, 24 Oct 2023 22:51:39 +0000 (01:51 +0300)]
spi: add support for Amlogic A1 SPI Flash Controller
Add A1 SPIFC driver from Linux. Slightly modified to use u-boot driver
framework and accommodate to lack of ioread32_rep/iowrite32_rep.
Based on Linux version 6.6-rc4
Signed-off-by: Igor Prusov <IVPrusov@sberdevices.ru> Signed-off-by: Martin Kurbanov <mmkurbanov@sberdevices.ru> Reviewed-by: Simon Glass <sjg@chromium.org> Link: https://lore.kernel.org/r/20231024225140.366571-2-ivprusov@sberdevices.ru Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
[trini: Drop <common.h> as it's not needed]
- kirkwood: Enable bootstd on some boards (Tony)
- mvebu: turris_mox: Extend to support RIPE Atlas Probe (Marek)
- mvebu/bubt: Support eMMC data partition booting (Josua)
Ilias Apalodimas [Wed, 25 Oct 2023 07:25:25 +0000 (10:25 +0300)]
test/py: always use autostart on tpm2 selftests
commit 789ed2784256 ("test/py: replace 'tpm2 init, startup, selftest' sequences")
changed some of the tpm2 init sequences to 'tpm2 autostart' instead of
calling 'tpm init', 'tpm startup TPM2_SU_CLEAR', 'tpm2 self_test full'.
The autostart command calls the afforementioned sequence and on top of
that deals with the 'tpm2 init' return codes if the tpm is already
started. Since we initialize the tpm from various subsystems now,
replace the last remaining instances of 'tpm2 init' with 'tpm2
autostart'. Since the latter calls 'tpm2 init' anyway we will still be
implicitly testing the validity of that command
It's worth noting that since 'tpm2 autostart' performs the startup and
self tests sequences of the tpm we could drop
'test_tpm2_sandbox_self_test_full' and 'test_tpm2_startup, but let's
keep the since they test tpm commands and options
Ilias Apalodimas [Tue, 24 Oct 2023 15:43:54 +0000 (10:43 -0500)]
test: use a non system PCR for testing PCR extend
We currently use PCR 0 for testing the PCR read/extend functionality in
our selftests. How ever those PCRs are defined by the TCG spec for
platform use. For example if the tests run *after* the efi subsystem
initialization, which extends PCRs 0 & 7 it will give a false positive.
So let's switch over to a PCR which is more suitable and is defined for
OS use. It's worth noting that we are using PCR10 here, since PCR9 is
used internally by U-Boot if we choose to measure the loaded DTB
Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Ilias Apalodimas [Tue, 24 Oct 2023 15:43:53 +0000 (10:43 -0500)]
efi_loader: fix EFI_ENTRY point on get_active_pcr_banks
efi_tcg2_get_active_pcr_banks doesn't immediately call the
EFI_ENTRY() wrapper once it enters the function. Move the call a
few lines above to cover the error cases properly as well.
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Eddie James [Tue, 24 Oct 2023 15:43:50 +0000 (10:43 -0500)]
bootm: Support boot measurement
Add a configuration option to measure the boot through the bootm
function. Add the measurement state to the booti and bootz paths
as well.
Signed-off-by: Eddie James <eajames@linux.ibm.com> Reviewed-by: Simon Glass <sjg@chromium.org>
Ilias: Added some info on Kconfig explaining this is when booting !EFI Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Eddie James [Tue, 24 Oct 2023 15:43:49 +0000 (10:43 -0500)]
tpm: Support boot measurements
Add TPM2 functions to support boot measurement. This includes
starting up the TPM, initializing/appending the event log, and
measuring the U-Boot version. Much of the code was used in the
EFI subsystem, so remove it there and use the common functions.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
For the API moving around from EFI -> u-boot core Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
For EFI testing Tested-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Eddie James [Tue, 24 Oct 2023 15:43:48 +0000 (10:43 -0500)]
tpm: sandbox: Update for needed TPM2 capabilities
The driver needs to support getting the PCRs in the capabilities
command. Fix various other things and support the max number
of PCRs for TPM2.
Remove the !SANDBOX dependency for EFI TCG2 as well.
Signed-off-by: Eddie James <eajames@linux.ibm.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Neil Armstrong [Mon, 23 Oct 2023 12:41:36 +0000 (14:41 +0200)]
configs: meson64: add alternate USB DFU boot target
Add boot over DFU RAM as an alternate to running script at
a fixed address like done today.
The main culprit is that it's not possible to do that
on G12A/Sm1 platforms due to changes in the USB boot protocol.
With this, U-Boot will present a DFU device with a ram slot where
the Host could write a fitImage or legacy U-Boot image, then with the
detach command boot will continue trying to boot the uploaded image.
The environment is used to configure some additional boot features such as:
* extra boot arguments
* enable AVB (Android Verified Boot) verification
Right now, we cannot store it in eMMC:
Loading Environment from nowhere... OK
Fix it by enabling the appropriate options in the defconfig
Fixes: b749d5ecdc06 ("configs: meson64_android: define raw parts for bootloader") Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20231026-fix-saveenv-v1-1-6aa59be65481@baylibre.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Josua Mayer [Wed, 25 Oct 2023 08:22:54 +0000 (10:22 +0200)]
cmd: mvebu/bubt: move eMMC data-partition uboot from LBA-0 to 4096
A38x bootrom only searches 2 sectors when booting from eMMC,
irregardless of data or boot partition: 0 & 4096.
For eMMC boot partitions sector 0 is fine, but on data partition it
conflicts with MBR.
Change bubt command default to 4096 for eMMC data partition only, to
allow using an MBR partition table on the eMMC data partition while also
booting from it.
Signed-off-by: Josua Mayer <josua@solid-run.com> Reviewed-by: Stefan Roese <sr@denx.de>
Josua Mayer [Wed, 25 Oct 2023 08:22:53 +0000 (10:22 +0200)]
arm: mvebu: allow additional 4096 offset for bootable mmc image
Disarm the error message forcing u-boot/spl image to be located at
sector 0 on eMMC data-partition and microSD.
Offset 0 makes sense on eMMC boot partitions only, data partition must
use 4096 to avoid conflicting with MBR.
Valid offsets when booting from microSD, reported by boot-rom v1.73:
BootROM: Bad header at offset 00000200
BootROM: Bad header at offset 00004400
BootROM: Bad header at offset 00200000
BootROM: Bad header at offset 00400000
BootROM: Bad header at offset 00600000
BootROM: Bad header at offset 00800000
BootROM: Bad header at offset 00A00000
BootROM: Bad header at offset 00C00000
BootROM: Bad header at offset 00E00000
BootROM: Bad header at offset 01000000
BootROM: Bad header at offset 01200000
BootROM: Bad header at offset 01400000
BootROM: Bad header at offset 01600000
BootROM: Bad header at offset 01800000
BootROM: Bad header at offset 01A00000
BootROM: Bad header at offset 01C00000
BootROM: Bad header at offset 01E00000
BootROM: Bad header at offset 02000000
BootROM: Bad header at offset 02200000
BootROM: Bad header at offset 02400000
BootROM: Bad header at offset 02600000
BootROM: Bad header at offset 02800000
BootROM: Bad header at offset 02A00000
BootROM: Bad header at offset 02C00000
BootROM: Bad header at offset 02E00000
Valid offsets when booting from eMMC:
BootROM: Bad header at offset 00000000
BootROM: Bad header at offset 00200000
Switching BootPartitions.
BootROM: Bad header at offset 00000000
BootROM: Bad header at offset 00200000
Fixes: 2226ca17348 ("arm: mvebu: Load U-Boot proper binary in SPL code based on kwbimage header") Signed-off-by: Josua Mayer <josua@solid-run.com> Reviewed-by: Stefan Roese <sr@denx.de>
Milan P. Stanić [Tue, 17 Oct 2023 19:46:58 +0000 (21:46 +0200)]
doc: build: update description of build dependencies for Alpine Linux
Signed-off-by: Milan P. Stanić <mps@arvanta.net> Reviewed-by: Simon Glass <sjg@chromium.org>
Reformat and keep ncurses-dev needed for 'make menuconfig' Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
- Remove common.h in a number of places and make checkpatch.pl complain
about its use in all cases, allow the mbr command to handle 4 primary
partitions, fix an issue with the pstore command, fix a problem with
cli parsing of escape sequences, remove and ignore more files, allow
for the serial port to be flushed with every print (for debugging),
and add SCMI power domain support.
Rasmus Villemoes [Mon, 16 Oct 2023 08:35:22 +0000 (10:35 +0200)]
serial: introduce CONFIG_CONSOLE_FLUSH_ON_NEWLINE
When debugging, one sometimes only gets partial output lines or
nothing at all from the last printf, because the uart has a largish
buffer, and the code after the printf() may cause the CPU to hang
before the uart IP has time to actually emit all the characters. That
can be very confusing, because one doesn't then know exactly where the
hang happens.
Introduce a config knob allowing one to wait for the uart fifo to
drain whenever a newline character is printed, roughly corresponding
to the effect of setvbuf(..., _IOLBF, ...) in ordinary C programs.
Since this uses IS_ENABLED() instead of cpp ifdef, we can remove the
ifdef around the _serial_flush() definition - if neither
CONSOLE_FLUSH_SUPPORT or CONSOLE_FLUSH_ON_NEWLINE are enabled, the
compiler elides _serial_flush(), but it won't warn about it being
unused.
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Reviewed-by: Simon Glass <sjg@chromium.org>
AKASHI Takahiro [Mon, 16 Oct 2023 05:39:43 +0000 (14:39 +0900)]
firmware: scmi: add power domain protocol support
In this patch, added are helper functions to directly manipulate
SCMI power domain management protocol. DM compliant power domain
driver will be implemented on top of those interfaces in a succeeding
patch.
cmd: mbr: Allow 4 MBR partitions without need for extended
Current code allows up to 3 MBR partitions without extended one.
If more than 3 partitions are required, then extended partition(s)
must be used.
This commit allows up to 4 primary MBR partitions without the
need for extended partition.
Add mbr test unit. In order to run the test manually, mmc6.img file
of size 12 MiB or greater is required in the same directory as u-boot.
Test also runs automatically via ./test/py/test.py tool.
Running mbr test is only supported in sandbox mode.
Signed-off-by: Alex Gendin <agendin@matrox.com>
[ And due to some further changes for testing ] Signed-off-by: Simon Glass <sjg@chromium.org>
But with these default address-cells and size-cells values, pstore
isn't working on A64. Root node for A64 defines 'address-cells' and
'size-cells' as 1.
dtc complains if reserved-memory has different address-cells and
size-cells.
```
Warning (ranges_format): /reserved-memory:ranges: empty "ranges"
property but its #address-cells (2) differs from / (1)
```
This patch takes into account address-cells and size-cells of the root
node and uses them as values for new reserved-memory node.
John Clark [Fri, 13 Oct 2023 13:26:16 +0000 (13:26 +0000)]
.gitignore: ignore misc include, simple-bin, and tools/generated build artifacts
make rock5b-rk3588_defconfig
make
git status
before
~~~~~~~
On branch master
Your branch is ahead of 'origin/master' by 1 commit.
(use "git push" to publish your local commits)
Untracked files:
(use "git add <file>..." to include in what will be committed)
include/autoconf.mk
include/autoconf.mk.dep
include/config.h
mkimage-in-simple-bin-spi.mkimage-rockchip-tpl
mkimage-in-simple-bin-spi.mkimage-u-boot-spl
mkimage-in-simple-bin.mkimage-rockchip-tpl
mkimage-in-simple-bin.mkimage-u-boot-spl
simple-bin-spi.map
simple-bin.fit.fit
simple-bin.fit.itb
simple-bin.map
tools/generated/
after
~~~~~~~
On branch master
Your branch is ahead of 'origin/master' by 1 commit.
(use "git push" to publish your local commits)
nothing to commit, working tree clean
Signed-off-by: John Clark <inindev@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
John Clark [Fri, 13 Oct 2023 13:23:07 +0000 (13:23 +0000)]
Makefile: remove misc include and simple-bin build artifacts on clean
make rock5b-rk3588_defconfig
make
make clean
git status
before
~~~~~~~
On branch master
Your branch is up to date with 'origin/master'.
Untracked files:
(use "git add <file>..." to include in what will be committed)
include/autoconf.mk
include/autoconf.mk.dep
include/config.h
mkimage-in-simple-bin-spi.mkimage-rockchip-tpl
mkimage-in-simple-bin-spi.mkimage-u-boot-spl
mkimage-in-simple-bin.mkimage-rockchip-tpl
mkimage-in-simple-bin.mkimage-u-boot-spl
simple-bin.fit.fit
simple-bin.fit.itb
after
~~~~~~~
On branch master
Your branch is ahead of 'origin/master' by 1 commit.
(use "git push" to publish your local commits)
Tom Rini [Thu, 12 Oct 2023 23:03:54 +0000 (19:03 -0400)]
include: Add <linux/types.h> in a few places
These files references a number of types that are defined in
<linux/types.h> (and so forth), so include it here rather than rely on
indirect inclusion.
Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
Yurii Monakov [Tue, 10 Oct 2023 08:16:39 +0000 (11:16 +0300)]
cli: Consume invalid escape sequences early
Unexpected 'Esc' key presses are accumulated internally, even if it is
already clear that the current escape sequence is invalid. This results
in weird behaviour. For example, the next character after 'Esc' key
simply disappears from input and 'Unknown command' is printed
after 'Enter'.
This commit fixes some issues with extra 'Esc' keys entered by user:
1. Sequence <Esc><Esc><Enter> right after autoboot stop gives:
=>
nknown command 'ry 'help'
=>
2. Sequence <Esc><p><r><i><Enter> gives:
=> ri
Unknown command 'ri' - try 'help'
=>
3. Extra 'Esc' key presses break backspace functionality.
Signed-off-by: Yurii Monakov <monakov.y@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
Tom Rini [Tue, 24 Oct 2023 13:39:52 +0000 (09:39 -0400)]
Merge tag 'u-boot-rockchip-20231024' of https://source.denx.de/u-boot/custodians/u-boot-rockchip
- Add Board: rk3588 NanoPC-T6, Orange Pi 5, Orange Pi 5 Plus;
- clk driver fix for rk3568 and rk3588;
- rkmtd cmd support for rockchip nand device;
- dts update and sync from linux;
Johan Jonker [Wed, 18 Oct 2023 14:01:59 +0000 (16:01 +0200)]
rockchip: test: dm: add rkmtd test
Add Rockchip rkmtd test:
Create/attach/detach RKMTD device.
Send/read data with Rockchip boot block header.
Test that reusing the same label should work.
Basic test of 'rkmtd' commands.
Signed-off-by: Johan Jonker <jbx6244@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Simon Glass <sjg@chromium.org>
Johan Jonker [Wed, 18 Oct 2023 14:01:40 +0000 (16:01 +0200)]
rockchip: cmd: add rkmtd command
The command rkmtd creates a virtual block device to transfer
Rockchip boot block data to and from NAND with block orientated
tools like "ums" and "rockusb".
It uses the Rockchip MTD driver to scan for boot blocks and copies
data from the first block in a GPT formated virtual disk.
Data must be written in U-boot "idbloader.img" format and start at
partition "loader1" offset 64. The data header is parsed
for length and offset. When the last sector is received
it erases up to 5 erase blocks on NAND and writes bootblocks
in a pattern depending on the NAND ID. Data is then verified.
When a block turns out bad the block header is discarded.
Signed-off-by: Johan Jonker <jbx6244@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
Johan Jonker [Wed, 18 Oct 2023 14:00:56 +0000 (16:00 +0200)]
rockchip: block: add rkmtd class and drivers
Add rkmtd class and drivers to create a virtual block device
to transfer Rockchip boot block data to and from NAND with
block orientated tools like "ums" and "rockusb".
Signed-off-by: Johan Jonker <jbx6244@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
On Rockchip SoCs the first boot stages are written on NAND
with help of manufacturer software that uses a different format
then the MTD framework. Skip the automatic BBT scan with the
NAND_SKIP_BBTSCAN option to be able to pass the driver probe
function and to let the original data unchanged.
Signed-off-by: Johan Jonker <jbx6244@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Jonas Karlman [Tue, 17 Oct 2023 21:40:22 +0000 (21:40 +0000)]
board: rockchip: Add Xunlong Orange Pi 5 Plus
Xunlong Orange Pi 5 Plus is a single-board computer based on the
Rockchip RK3588 SoC. The board provides abundant interfaces, including
two HDMI output ports, one HDMI input port, two 2.5G Ethernet ports,
M.2 M-Key slot, M.2 E-Key slot, two USB 3.0, two USB 2.0, and two Type-C.
Features tested on a Orange Pi 5 Plus 4GB v1.2:
- SD-card boot
- eMMC boot
- SPI Flash boot
- PCIe/NVMe
- USB 2.0 host
- Ethernet
Device tree is imported from linux v6.7-rockchip-dts64-1 tag.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Jonas Karlman [Tue, 17 Oct 2023 21:40:21 +0000 (21:40 +0000)]
board: rockchip: Add Xunlong Orange Pi 5
Xunlong Orange Pi 5 is a single-board computer based on the Rockchip
RK3588S SoC. The board provides abundant interfaces, HDMI output, GPIO
interface, M.2 PCIe2.0, Type-C, Gigabit LAN port, 2*USB2.0, 1*USB3.0,
etc.
Features tested on a Orange Pi 5 4GB v1.2:
- SD-card boot
- SPI Flash boot
- PCIe/NVMe
- USB 2.0 host
- Ethernet
Device tree is imported from linux v6.7-rockchip-dts64-1 tag.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Jonas Karlman [Tue, 17 Oct 2023 17:02:11 +0000 (17:02 +0000)]
rockchip: rk3588-rock-5b: Sync USB3 nodes from mainline linux patches
The device tree for rk3588 and rock-5b contain usb3 nodes that have
deviated too much from current state of submitted mainline linux usb3
patches, see [1].
Sync usb3 related nodes from latest patches and collaboras rk3588 tree
so that dwc3-generic driver can be updated to include support for the
rockchip,rk3588-dwc3 compatible in the future, use rockchip,rk3568-dwc3
compatible until final node is merged in linux maintainer tree.
Jonas Karlman [Tue, 17 Oct 2023 17:02:10 +0000 (17:02 +0000)]
rockchip: rk3588-rock-5b: Enable support for PCIe SATA cards
Enable support for PCIe SATA cards and the on-board SATA controller.
This also revert use of CONFIG_PCI_INIT_R in order to speed up boot from
eMMC or SD-cards. Standard boot will initialize pci after faster boot
media have been enumerated.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Reviewed-by: Christopher Obbard <chris.obbard@collabora.com> Tested-by: Christopher Obbard <chris.obbard@collabora.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Jonas Karlman [Tue, 17 Oct 2023 17:02:08 +0000 (17:02 +0000)]
rockchip: rk3588: Sync device tree from v6.7-rockchip-dts64-1 tag
Sync rk3588 device tree from v6.7-rockchip-dts64-1 tag.
Adds PCIe, button and led nodes to rk3588-evb1-v10 and rk3588-rock-5b
boards. Also remove includes from u-boot.dtsi-files that is no longer
needed.
Linux commits: 42145b7a8235 ("arm64: dts: rockchip: add PCIe network controller to rock-5b") 199cbd5f195a ("arm64: dts: rockchip: add PCIe for M.2 M-key to rock-5b") da447ec38780 ("arm64: dts: rockchip: add PCIe for M.2 E-Key to rock-5b") 86a2024d95e2 ("arm64: dts: rockchip: add PCIe2 network controller to rk3588-evb1") 46bb398ea1d8 ("arm64: dts: rockchip: add PCIe3 bus to rk3588-evb1") 1c9a53ff7ece ("arm64: dts: rockchip: Add sdio node to rock-5b") 3eaf2abd11aa ("arm64: dts: rockchip: Add sfc node to rk3588s") bf012368bb0a ("arm64: dts: rockchip: Add I2S2 M0 pin definitions to rk3588s") 3d77a3e51b0f ("arm64: dts: rockchip: Add UART9 M0 pin definitions to rk3588s") 0002c377e862 ("arm64: dts: rockchip: Remove duplicate regulator vcc3v3_wf from rock-5b") a6169ab36923 ("arm64: dts: rockchip: Enable UART6 on rock-5b") dd6dc0c4c126 ("arm64: dts: rockchip: Add AV1 decoder node to rk3588s") afa933c208e5 ("arm64: dts: rockchip: add ADC buttons to rk3588-evb1") 7952cbbda301 ("arm64: dts: rockchip: add status LED to rock-5b")
Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Reviewed-by: Christopher Obbard <chris.obbard@collabora.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Simon Glass [Mon, 23 Oct 2023 07:02:13 +0000 (00:02 -0700)]
bootstd: Scan all bootdevs in a boot_targets entry (take 2)
When the boot_targets environment variable is used with the distro-boot
scripts, each device is included individually. For example, if there
are three mmc devices, then we will have something like:
boot_targets="mmc0 mmc1 mmc2"
In contrast, standard boot supports specifying just the uclass, i.e.:
boot_targets="mmc"
The intention is that this should scan all MMC devices, but in fact it
currently only scans the first.
Update the logic to handle this case, without required BOOTSTD_FULL to
be enabled.
Signed-off-by: Simon Glass <sjg@chromium.org> Reported-by: Date Huang <tjjh89017@hotmail.com> Reported-by: Vincent Stehlé <vincent.stehle@arm.com> Reported-by: Ivan Ivanov <ivan.ivanov@suse.com> Tested-by: Ivan T.Ivanov <iivanov@suse.de>
Simon Glass [Mon, 23 Oct 2023 07:02:12 +0000 (00:02 -0700)]
bootstd: Correct logic for single uclass
The current logic for "bootflow mmc" is flawed since it checks the
uclass of the bootdev instead of its parent, the media device. Correct
this and add a test that covers this scenario.
Signed-off-by: Simon Glass <sjg@chromium.org> Tested-by: Ivan T.Ivanov <iivanov@suse.de>
Simon Glass [Mon, 23 Oct 2023 07:02:10 +0000 (00:02 -0700)]
Revert "bootstd: Scan all bootdevs in a boot_targets entry"
This commit was intended to allow all bootdevs in each boot_targets
entry to be scanned. However it causes bad ordering with bootdevs, e.g.
scanning Ethernet bootdevs when it should be keeping to mmc.
Tom Rini [Mon, 23 Oct 2023 13:04:55 +0000 (09:04 -0400)]
Merge branch 'master' of https://source.denx.de/u-boot/custodians/u-boot-sunxi
This is mostly about support for the Allwinner R528/T113s SoC, which is
reportedly the same die as the Allwinner D1, but with the two
Arm Cortex-A7 cores activated instead of the RISC-V one.
Using sunxi code outside of arch/arm proved to be difficult, so apart
from enabling this Arm SoC, the patches also prepare for more refactoring
to get the D1 nicely supported some day:
- We get rid of some Kconfig (hard-)coded GPIO pins, responsible for
enabling regulators.
- The GPIO code is moved out of arch/arm, into drivers/gpio.
- Some definitions are moved out of header files under asm/arch.
- Some T113s/D1 specific definitions are guarded by a generic Kconfig
symbol (CONFIG_SUNXI_GEN_NCAT2).
- The DRAM controller initialisation code is located under drivers/ram.
- The base SoC .dtsi files are shared (under arch/riscv, as in Linux).
Of course there are also the usual new SoC specific patches, like clock
and pinmux descriptions, alongside a rework of the pinctrl code, since
Allwinner changed the GPIO register layout, for the first time since
sunxi's inception.
On top of this the PSCI code sees some update, to provide SMP services
for R528/T113s boards. Many thanks to Sam for providing this code and
staying strong through the review cycles.
The final patch enables support for one popular board, I hope to see
more DTs and defconfigs contributed in the future!
Many thanks to all the various contributors, testers and reviewers,
that series was a real team effort!
Artur Rojek [Wed, 18 Oct 2023 14:00:59 +0000 (16:00 +0200)]
board: Add support for Conclusive KSTR-SAMA5D27
Introduce support for Conclusive KSTR-SAMA5D27 Single Board Computer.
Co-developed-by: Jakub Klama <jakub@conclusive.pl> Signed-off-by: Jakub Klama <jakub@conclusive.pl> Co-developed-by: Marcin Jabrzyk <marcin@conclusive.pl> Signed-off-by: Marcin Jabrzyk <marcin@conclusive.pl> Signed-off-by: Artur Rojek <artur@conclusive.pl>
Artur Rojek [Wed, 18 Oct 2023 14:00:57 +0000 (16:00 +0200)]
event: add new EVT_SETTINGS_R event
Introduce EVT_SETTINGS_R, triggered post-relocation and before console
init.
This event gives an option to perform any platform-dependent setup,
which needs to take place before show_board_info(). Usage examples
include readout of EEPROM stored settings.
Signed-off-by: Artur Rojek <artur@conclusive.pl> Reviewed-by: Simon Glass <sjg@chromium.org>
Elaine Zhang [Thu, 12 Oct 2023 10:18:28 +0000 (18:18 +0800)]
clk: rockchip: rk3588: fix up the frac pll calculation
rk3588 frac pll:
FFVCO = ((m + k / 65536) * FFIN) / p
FFOUT = ((m + k / 65536) * FFIN) / (p * 2s)
k is the original code, but the K[15:0] is complement code
(6'b1000_0000_0000_0000 <= K[15:0] <= 16'b0111_1111_1111_1111),
need to be converted.
Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Sam Edwards [Thu, 12 Oct 2023 01:47:56 +0000 (19:47 -0600)]
sunxi: psci: implement PSCI on R528
This patch adds the necessary code to make nonsec booting and PSCI
secondary core management functional on the R528/T113.
Signed-off-by: Sam Edwards <CFSworks@gmail.com> Tested-by: Maksim Kiselev <bigunclemax@gmail.com> Tested-by: Kevin Amadiva <kevin.amadiva@mec.at> Reviewed-by: Andre Przywara <andre.przywara@arm.com>
projects / u-boot.git / log