]> git.dujemihanovic.xyz Git - u-boot.git/log
u-boot.git
4 years agoclk: imx: pllv3: fix potential 'divide by zero' in sys_get_rate()
Giulio Benetti [Fri, 17 Jan 2020 12:06:40 +0000 (13:06 +0100)]
clk: imx: pllv3: fix potential 'divide by zero' in sys_get_rate()

Guard 'parent_rate==0' to prevent 'divide by zero' issue in
clk_pplv3_sys_get_rate(). If it is 0, let's return with -EINVAL.

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
4 years agoclk: Fix error checking of dev_read_addr_ptr
Sean Anderson [Wed, 25 Dec 2019 04:57:47 +0000 (23:57 -0500)]
clk: Fix error checking of dev_read_addr_ptr

dev_read_addr_ptr returns NULL on error, not FDT_ADDR_T_NONE.

Signed-off-by: Sean Anderson <seanga2@gmail.com>
4 years agoclk: Include missing headers for linux/clk-provider.h
Sean Anderson [Wed, 25 Dec 2019 04:56:22 +0000 (23:56 -0500)]
clk: Include missing headers for linux/clk-provider.h

This header was missing a couple of include dependencies when included on its
own.

Signed-off-by: Sean Anderson <seanga2@gmail.com>
4 years agoclk: uclass: clk_get_by_name() must not be available if CONFIG_OF_PLATDATA is enabled
Giulio Benetti [Thu, 12 Dec 2019 22:53:19 +0000 (23:53 +0100)]
clk: uclass: clk_get_by_name() must not be available if CONFIG_OF_PLATDATA is enabled

clk_get_by_name() requires clk_get_by_id() that is not available if
CONFIG_OF_PLATDATA is defined, so move clk_get_by_name() into #else
condition of #if CONFIG_IS_ENABLED(OF_PLATDATA).

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
4 years agoclk: show more error info when uclass_get_device_by_name
Peng Fan [Tue, 22 Oct 2019 03:31:08 +0000 (03:31 +0000)]
clk: show more error info when uclass_get_device_by_name

It will ease debug when uclass_get_device_by_name failed with
more error info printed out.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
4 years agoclk: mediatek: use unsigned type for returning the clk rate
Fabien Parent [Thu, 17 Oct 2019 19:02:05 +0000 (21:02 +0200)]
clk: mediatek: use unsigned type for returning the clk rate

mtk_clk_find_parent_rate is calling clk_get_rate to know the rate
of a parent clock. clk_get_rate returns a ulong, while
mtk_clk_find_parent_rate returns an int. This implicit cast creates
an issue for clock rates big enough to need the full 32 bits to
store its data. When that happen the clk rate will become incorrect
because of the implicit cast between ulong -> int -> ulong.

This commit change the return type of mtk_clk_find_parent_rate to
ulong.

Signed-off-by: Fabien Parent <fparent@baylibre.com>
4 years agoMerge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriq
Tom Rini [Sat, 25 Jan 2020 17:20:51 +0000 (12:20 -0500)]
Merge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriq

Updates and fixes for ls1028a, lx2160a, ls1012a, ls1021a, ls2080a,
ls1088a platforms:
- lx2-rev2 pcie support, enetc related updates, layerscape-pcie fixes

4 years agoMerge branch '2020-01-24-master-imports'
Tom Rini [Sat, 25 Jan 2020 17:04:59 +0000 (12:04 -0500)]
Merge branch '2020-01-24-master-imports'

- Enable fastboot on some MediaTek platforms
- DMA enchancements
- Assorted bugfixes

4 years agomtd: add prototypes for weak function
Patrick Delaunay [Fri, 24 Jan 2020 12:45:56 +0000 (13:45 +0100)]
mtd: add prototypes for weak function

This patch adds a prototype for the weak function
board_mtdparts_default().

It solves one warning when compiling with W=1 on stm32mp1 board:

board/st/stm32mp1/stm32mp1.c:
     warning: no previous prototype for 'board_mtdparts_default'
              [-Wmissing-prototypes]
     void board_mtdparts_default(const char **mtdids,
                                 const char **mtdparts)
          ^~~~~~~~~~~~~~~~~~~~~~

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
4 years agocommon: blk: fix comment about blkcache_read return value
Eric Nelson [Wed, 22 Jan 2020 23:59:55 +0000 (16:59 -0700)]
common: blk: fix comment about blkcache_read return value

The blkcache_read() routine returns 1 (true) to indicate that a block was
found in the cache and returned, or 0 if not.

Signed-off-by: Eric Nelson <eric@nelint.com>
4 years agomeerkat96: fix typo in MAINTAINERS email address
Shawn Guo [Fri, 24 Jan 2020 04:59:42 +0000 (12:59 +0800)]
meerkat96: fix typo in MAINTAINERS email address

There is a typo in meerkat96 MAINTAINERS email address.  Fix it.

Reported-by: Carl Gelfand <carl@novtech.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
4 years agogenboardscfg.py: drop python version comment
Baruch Siach [Wed, 22 Jan 2020 12:54:24 +0000 (14:54 +0200)]
genboardscfg.py: drop python version comment

genboardscfg.py requires python 3.x since commit 3bc14098d8fb
("genboardscfg.py: Convert to Python 3").

Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com>
4 years agocommon: add blkcache init
Angelo Durgehello [Tue, 21 Jan 2020 09:37:27 +0000 (10:37 +0100)]
common: add blkcache init

On m68k, block_cache list is relocated, but next and prev list
pointers are not adjusted to the relocated struct list_head address,
so the first iteration over the block_cache list hangs.

This patch initializes the block_cache list after relocation.

Signed-off-by: Angelo Durgehello <angelo.dureghello@timesys.com>
Reviewed-by: Eric Nelson <eric@nelint.com>
4 years agonet: macb: Drop local cache flush
Vignesh Raghavendra [Thu, 16 Jan 2020 08:53:48 +0000 (14:23 +0530)]
net: macb: Drop local cache flush

Now that arch specific dma mapping APIs take care of cache
flush/invalidate, drop local cache flush operation.
While at that fix dma_unmap_single() call to match new prototype

Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
4 years agomtd: denali: Drop custom dma mapping functions
Vignesh Raghavendra [Thu, 16 Jan 2020 08:53:47 +0000 (14:23 +0530)]
mtd: denali: Drop custom dma mapping functions

Drop local dma_map_single() and dma_unmap_single() and use arch specific
common implementation

Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com>
4 years agommc: tmio-common: Drop custom dma mapping functions
Vignesh Raghavendra [Thu, 16 Jan 2020 08:53:46 +0000 (14:23 +0530)]
mmc: tmio-common: Drop custom dma mapping functions

Drop local dma_map_single() and dma_unmap_single() and use arch specific
common implementation

Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com>
4 years agoasm: dma-mapping.h: Fix dma mapping functions
Vignesh Raghavendra [Thu, 16 Jan 2020 08:53:45 +0000 (14:23 +0530)]
asm: dma-mapping.h: Fix dma mapping functions

Subsystems such as USB expect dma_map_single() and dma_unmap_single() to
do dcache flush/invalidate operations as required. For example, see
see drivers/usb/gadget/udc/udc-core.c::usb_gadget_map_request().
Currently drivers do this locally, (see drivers/usb/dwc3/ep0.c,
drivers/mtd/nand/raw/denali.c etc..)
Update arch specific dma_map_single() and dma_unmap_single() APIs to do
cache flush/invalidate  operations, so that drivers need not implement
them locally.

Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Rick Chen <rick@andestech.com>
4 years agofastboot: mt85xx: add command to flash/erase emmc hwpart
mingming lee [Thu, 16 Jan 2020 08:11:42 +0000 (16:11 +0800)]
fastboot: mt85xx: add command to flash/erase emmc hwpart

This patch includes the following:
1. Add fastboot command to erase the whole EMMC_USER
2. Add fastboot command to flash image at EMMC_BOOT1
3. Add fastboot command to erase the whole EMMC_BOOT1
4. Enale CONFIG_FASTBOOT_MMC_BOOT1_SUPPORT for mt8518

Signed-off-by: mingming lee <mingming.lee@mediatek.com>
4 years agoconfigs: mt8518: Enable fastboot related configs
mingming lee [Thu, 16 Jan 2020 08:11:41 +0000 (16:11 +0800)]
configs: mt8518: Enable fastboot related configs

Enable EFI module.
Enable fastboot.

Signed-off-by: mingming lee <mingming.lee@mediatek.com>
4 years agoconfigs: mt8518: enable usb gadget driver
mingming lee [Thu, 16 Jan 2020 08:11:40 +0000 (16:11 +0800)]
configs: mt8518: enable usb gadget driver

Enable board_late_init and usb gadget for mt8518

Signed-off-by: mingming lee <mingming.lee@mediatek.com>
4 years agoconfigs: mt8518: set global variables for fastboot
mingming lee [Thu, 16 Jan 2020 08:11:39 +0000 (16:11 +0800)]
configs: mt8518: set global variables for fastboot

set common fastboot variables for mt8518

Signed-off-by: mingming lee <mingming.lee@mediatek.com>
4 years agoARM: Mediatek: Add board_late_init to init usb gadget driver
mingming lee [Thu, 16 Jan 2020 08:11:38 +0000 (16:11 +0800)]
ARM: Mediatek: Add board_late_init to init usb gadget driver

Add board_late_init function to init usb gadget driver for mt8518

Signed-off-by: mingming lee <mingming.lee@mediatek.com>
4 years agousb: musb-new: mt85xx: add musb-new gadget driver.
mingming lee [Thu, 16 Jan 2020 08:11:37 +0000 (16:11 +0800)]
usb: musb-new: mt85xx: add musb-new gadget driver.

Using musb-new structure for mt85xx gadget driver.
Add gadget driver dts for mt8518 SoCs.

Signed-off-by: mingming lee <mingming.lee@mediatek.com>
4 years agocrypto: make mod_exp_sw() static
Heinrich Schuchardt [Sun, 19 Jan 2020 18:48:04 +0000 (19:48 +0100)]
crypto: make mod_exp_sw() static

Function mod_exp_sw() is only used via the operators of the uclass.
It is not defined in any include.

Make mod_exp_sw() static.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
4 years agolib: Kconfig dependencies for pseudo-random library
Heinrich Schuchardt [Sun, 19 Jan 2020 18:28:12 +0000 (19:28 +0100)]
lib: Kconfig dependencies for pseudo-random library

drivers/rng/sandbox_rng.c requires rand() to be defined but configuration
option CONFIG_CONFIG_LIB_RAND selected in drivers/rng/Kconfig does not
exist.

test/lib/test_aes.c requires rand() to be defined.

Fix the selection criteria for choice "Pseudo-random library support type".

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
4 years agolib: rsa: consider CONFIG_SPL_RSA
Heinrich Schuchardt [Sun, 19 Jan 2020 08:26:22 +0000 (09:26 +0100)]
lib: rsa: consider CONFIG_SPL_RSA

CONFIG_SPL_RSA is meant to control if lib/rsa/* is used for SPL. Adjust
lib/Makefile to consider this setting.

This was correctly setup with commit 51c14cd128f4 ("verified-boot: Minimal
support for booting U-Boot proper from SPL") and got lost with commit
089df18bfe9d ("lib: move hash CONFIG options to Kconfig").

Fixes: 089df18bfe9d ("lib: move hash CONFIG options to Kconfig")
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
4 years agotools: ftdgrep: correct the find regions loop in do_fdtgrep
Patrick Delaunay [Mon, 13 Jan 2020 08:33:51 +0000 (09:33 +0100)]
tools: ftdgrep: correct the find regions loop in do_fdtgrep

Use realloc and update the loop executed in do_fdtgrep to find all
the regions: only test count > max_region after the second pass.

This patch solve an issue if the number of region found (count)
is greater then the default value (max_region = count = 100):
the second pass is never executed, because the loop stops after
the first pass (i = 0, count > 100, max_regions = 100)
with error -1 and the error message
"Internal error with fdtgrep_find_region".

I also update the error message.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
4 years agoarm: Add arm handoff header file
Michael Trimarchi [Sun, 5 Jan 2020 15:51:13 +0000 (16:51 +0100)]
arm: Add arm handoff header file

Add an arch-specific handoff header so that we can use the HANDOFF feature
on arm devices.

Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
4 years agoserial: ns16550: Use old baud rate divisor for flushing if not given
Patrik Dahlström [Sat, 21 Dec 2019 16:25:12 +0000 (17:25 +0100)]
serial: ns16550: Use old baud rate divisor for flushing if not given

If baud_divisor is not set (i.e. == -1), we should use the baud divisor
already in use for flushing the xmit register. If we don't flush the
xmit register, then SPL will hang.

Signed-off-by: Patrik Dahlström <risca@dalakolonin.se>
4 years agocmd: mtd: solve bad block support in erase command
Patrick Delaunay [Fri, 20 Sep 2019 07:20:12 +0000 (09:20 +0200)]
cmd: mtd: solve bad block support in erase command

This patch modify the loop in mtd erase command to erase one by one
the blocks in the requested area.

It solves issue on "mtd erase" command on nand with existing bad block,
the command is interrupted on the first bad block with the trace:
"Skipping bad block at 0xffffffffffffffff"

In MTD driver (nand/raw), when a bad block is present on the MTD
device, the erase_op.fail_addr is not updated and we have the initial
value MTD_FAIL_ADDR_UNKNOWN = (ULL)-1.

This case seems normal in nand_base.c:nand_erase_nand(),
we have the 2 exit cases during the loop:

1/ we have a bad block (nand_block_checkbad)
instr->state = MTD_ERASE_FAILED
loop interrupted (goto erase_exit)

2/ if block erase failed (status & NAND_STATUS_FAIL)
instr->state = MTD_ERASE_FAILED;
instr->fail_addr =
((loff_t)page << chip->page_shift);
loop interrupted (goto erase_exit)

So erase_op.fail_addr can't be used if bad blocks were present
in the erased area; we need to use mtd_erase only one block to detect
and skip these existing bad blocks (as it is done in nand_util.c).

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
4 years agoremoteproc: elf_loader: fix program header parsing
Fabien Dessenne [Wed, 4 Sep 2019 07:53:22 +0000 (09:53 +0200)]
remoteproc: elf_loader: fix program header parsing

Fix an issue where some sections are never loaded : if p_type is
different from PT_LOAD the phdr pointer must be incremented.

Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com>
Acked-by: Suman Anna <s-anna@ti.com>
4 years agoconfigs: ls1028aqds: enable mdio muxing by default
Alex Marginean [Mon, 2 Dec 2019 10:58:14 +0000 (12:58 +0200)]
configs: ls1028aqds: enable mdio muxing by default

LS1028A QDS boards have a MDIO MUX and they require the driver for it for
PHYs to work.

Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com>
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
4 years agoconfigs: fsl-layerscape: secure_boot: Enable setexpr command
Udit Agarwal [Wed, 20 Nov 2019 08:51:27 +0000 (08:51 +0000)]
configs: fsl-layerscape: secure_boot: Enable setexpr command

setexpr command is used while running secure boot
(chain of trust with confidentiality) feature.

Enable CONFIG_CMD_SETEXPR to enable setexpr command.

Signed-off-by: Udit Agarwal <udit.agarwal@nxp.com>
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
4 years agoboard: fsl: lx2160a: Fix the loop in board_fix_fdt function
Pankaj Bansal [Wed, 15 Jan 2020 05:57:00 +0000 (05:57 +0000)]
board: fsl: lx2160a: Fix the loop in board_fix_fdt function

Fix loop in board_fix_fdt that erroneously increments the counter
in all cases whereas the counter should be incremented only if a
matching string has been found.

Fixes: 5d535aa40b ("board: fsl: lx2160a: implement board_fix_fdt")
Signed-off-by: Pankaj Bansal <pankaj.bansal@nxp.com>
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
4 years agoarch: armv8: fsl-layerscape: export serdes config to environment
Alex Marginean [Fri, 10 Jan 2020 23:05:40 +0000 (01:05 +0200)]
arch: armv8: fsl-layerscape: export serdes config to environment

Exports the serdes configuration as an environment variable for LS gen 3
SoCs, so it can be used in u-boot command line.  It should particularly
be useful for applying Linux DT overlays for the given serdes
configuration.
This code is called from arch_misc_init and not from the existing
serdes_init function because it depends on U-Boot environment being set
up.

Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
4 years agoboard: fsl: ls1028a: free up arch_misc_init
Alex Marginean [Fri, 10 Jan 2020 23:05:39 +0000 (01:05 +0200)]
board: fsl: ls1028a: free up arch_misc_init

Currently LS1028A board code uses arch_misc_init to set up the board mux
on QDS.  Move this code to misc_init_r.  This is consistent with LS gen 2
and T series SoCs/boards.

Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
4 years agoboard: fsl: ls1088a: remove empty arch_misc_init
Alex Marginean [Fri, 10 Jan 2020 23:05:38 +0000 (01:05 +0200)]
board: fsl: ls1088a: remove empty arch_misc_init

The arch_misc_init function is empty on LS108x SoCs/boards, remove it.

Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
4 years agoboard: fsl: ls2080a/ls2081a: remove empty arch_misc_init
Alex Marginean [Fri, 10 Jan 2020 23:05:37 +0000 (01:05 +0200)]
board: fsl: ls2080a/ls2081a: remove empty arch_misc_init

The arch_misc_init function is empty on LS2 SoCs/boards, remove it.

Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
4 years agoboard: fsl: lx2160a: free up arch_misc_init
Alex Marginean [Fri, 10 Jan 2020 23:05:36 +0000 (01:05 +0200)]
board: fsl: lx2160a: free up arch_misc_init

Currently LX2 board code uses arch_misc_init to set up the board mux on
RDB and QDS.  Move this code to misc_init_r.  This is consistent with LS
gen 2 and T series SoCs/boards.

Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
4 years agoarmv8: ls1028a_serdes: Add few missing serdes protocols
Alex Marginean [Fri, 10 Jan 2020 21:51:32 +0000 (23:51 +0200)]
armv8: ls1028a_serdes: Add few missing serdes protocols

Add serdes protocol 0x7777, 0x9999, 0xb998, 0xbb56 to supported list.
These protocols are supported and functional but they trigger a warning
in U-Boot console at boot because they are not on this list.

Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com>
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
4 years agodrivers: net: fsl_enetc: fix SXGMII MAC configuration
Alex Marginean [Fri, 10 Jan 2020 21:32:20 +0000 (23:32 +0200)]
drivers: net: fsl_enetc: fix SXGMII MAC configuration

Separate MAC and serdes configuration, MAC configuration must be applied
at each enetc_start() as FLR clears it.
This restores traffic for ENETC interfaces in USXGMII mode.

Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
4 years agolx2160: Correct default environment variable
Meenakshi Aggarwal [Fri, 10 Jan 2020 14:43:19 +0000 (20:13 +0530)]
lx2160: Correct default environment variable

Create separate "boot_scripts" and "boot_script_hdr" environment
variable for LX2160A RDB and QDS board.

Signed-off-by: Meenakshi Aggarwal <meenakshi.aggarwal@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
4 years agoinclude/configs: ls1012afrwy: adjust kernel_addr_r
Biwen Li [Fri, 10 Jan 2020 09:16:05 +0000 (17:16 +0800)]
include/configs: ls1012afrwy: adjust kernel_addr_r

The linux kernel Image is growing quite quickly,
if kernel Image size grow beyond 36 MB then
kernel Image at load address 0x81000000
overlaps with the reserved memory region
at 0x83400000.

Adjust kernel load address(kernel_addr_r) from
0x81000000 to 0x96000000 to avoid kernel Image
overlapping with reserved memory region.

This change fixes the below U-Boot error while
booting uncompressed kernel Image through booti command,
ERROR: reserving fdt memory region failed (addr=83400000 size=c00000)

Signed-off-by: Biwen Li <biwen.li@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
4 years agoinclude/configs: ls1012ardb: adjust kernel_addr_r
Biwen Li [Fri, 10 Jan 2020 09:16:04 +0000 (17:16 +0800)]
include/configs: ls1012ardb: adjust kernel_addr_r

The linux kernel Image is growing quite quickly,
if kernel Image size grow beyond 36 MB then
kernel Image at load address 0x81000000
overlaps with the reserved memory region
at 0x83400000.

Adjust kernel load address(kernel_addr_r) from
0x81000000 to 0x96000000 to avoid kernel Image
overlapping with reserved memory region.

This change fixes the below U-Boot error while
booting uncompressed kernel Image through booti command,
ERROR: reserving fdt memory region failed (addr=83400000 size=c00000)

Signed-off-by: Biwen Li <biwen.li@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
4 years agoarmv8: fsl-layerscape: LS1044A/1048A: enable Only 1x 10GE port
Pramod Kumar [Thu, 9 Jan 2020 08:53:16 +0000 (08:53 +0000)]
armv8: fsl-layerscape: LS1044A/1048A: enable Only 1x 10GE port

LS1088A has four personalities, LS1088A, LS1084A, LS1048A and LS1044A.
LS1044A, LS1048A are LS1088A personalities, which support only one
1x 10GE port.
MAC1 and MAC2 are associated with 1G SGMII, 2.5G SGMII, and XFI.
Disable MAC1 to have only one 1x 10GE port for LS1044A, LS1048A.

Signed-off-by: Pramod Kumar <pramod.kumar_1@nxp.com>
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
4 years agoARM: LS1021A: remove redundant "depends on ARCH_LS1021A"
Masahiro Yamada [Wed, 8 Jan 2020 10:46:45 +0000 (19:46 +0900)]
ARM: LS1021A: remove redundant "depends on ARCH_LS1021A"

These config entries are inside the menu block, which already
depends on ARCH_LS1021A:

  menu "LS102xA architecture"
          depends on ARCH_LS1021A

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
4 years agoboard/lx2160aqds: Update the DSPI status fixup
Xiaowei Bao [Wed, 8 Jan 2020 06:29:54 +0000 (14:29 +0800)]
board/lx2160aqds: Update the DSPI status fixup

The dts node of the DSPI controller in kernel is spi instead of dspi,
it is not correct if use "/soc/dspi@" to fix up the status of the dts
in kernel, so, modify it to "/soc/spi@".

The DSPI2 and I2C5 are muxed, and the status of DSPI2 node in kernel dts
default value is okay, So set the status of DSPI2 node in kernel dts to
disabled if it is muxed as I2C5.

Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
4 years agoconfigs: lx2160a: enable CONFIG_OF_BOARD_FIXUP for SECURE_BOOT defconfig
Wasim Khan [Mon, 6 Jan 2020 12:06:02 +0000 (12:06 +0000)]
configs: lx2160a: enable CONFIG_OF_BOARD_FIXUP for SECURE_BOOT defconfig

lx2160a rev1 and rev2 SoC has different pcie controller.
The pcie controller device tree node fields "compatible"
and registers names needs to be updated accordingly.

Enable CONFIG_OF_BOARD_FIXUP to apply board_fix_fdt
which updates the "compatible" and registers names.

Signed-off-by: Wasim Khan <wasim.khan@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
4 years agopci: layerscape: device tree fixup based on SoC and
Wasim Khan [Mon, 6 Jan 2020 12:06:00 +0000 (12:06 +0000)]
pci: layerscape: device tree fixup based on SoC and

lx2160a rev1 requires layerscape_gen4 device tree fixup and
lx2160a rev2 requires layerscape device tree fixup.
Add device tree fixup for lx2160a based on SoC and Version.

Signed-off-by: Wasim Khan <wasim.khan@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
4 years agopci: layerscape: Move streamId allocation to common device tree fixup
Wasim Khan [Mon, 6 Jan 2020 12:05:59 +0000 (12:05 +0000)]
pci: layerscape: Move streamId allocation to common device tree fixup

Move streamId allocation to layerscape common device tree fixup.
Calculate streamId based on SoC variant.

Signed-off-by: Wasim Khan <wasim.khan@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
4 years agopci: layerscape: Common device tree fixup for NXP SoCs
Wasim Khan [Mon, 6 Jan 2020 12:05:57 +0000 (12:05 +0000)]
pci: layerscape: Common device tree fixup for NXP SoCs

Add Common device tree fixup for NXP SoCs. Based on
SoC and revision call pcie_layerscape or pcie_layerscape_gen4
fixup.

Signed-off-by: Wasim Khan <wasim.khan@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
4 years agoarmv8: ls1012a: Make USB masters snoopable
Ran Wang [Thu, 26 Dec 2019 10:11:17 +0000 (18:11 +0800)]
armv8: ls1012a: Make USB masters snoopable

Program register bit of SCFG_SNPCNFGCR_USBRDSNP and
SCFG_SNPCNFGCR_USBWRSNP to drive USB read/write
snoop signal on LS1012A.

Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
4 years agodrivers: net: fsl_enetc: add write_hwaddr() for LS1028A
Michael Walle [Fri, 20 Dec 2019 13:16:48 +0000 (14:16 +0100)]
drivers: net: fsl_enetc: add write_hwaddr() for LS1028A

The LS1028A SoC is special in the handling of the MAC addresses. We need
to write to the IERB version of the PSIPMAR0/1 register. This value will
be sampled into the corresponding port PSIPMAR0/1 register if the PCI
memory access is enabled.

Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
4 years agodrivers: net: fsl_enetc: use write_hwaddr()
Michael Walle [Fri, 20 Dec 2019 13:16:47 +0000 (14:16 +0100)]
drivers: net: fsl_enetc: use write_hwaddr()

Intead of setting the MAC address in enetc_start() use the proper
write_hwaddr(). U-Boot takes care of the random MAC address, too.

Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
4 years agoboard: ls1046afwry: Disable sgmii support
Pramod Kumar [Fri, 20 Dec 2019 11:19:55 +0000 (11:19 +0000)]
board: ls1046afwry: Disable sgmii support

LS1046A SoC serdes protocol 0x3040 supports both sgmi and qsgmii,
however ls1046afrwy supports only qsgmii on board.
So, disable unsupported sgmii on board.

Signed-off-by: Pramod Kumar <pramod.kumar_1@nxp.com>
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
4 years agopci: layerscape: Fix the BARs disable function
Hou Zhiqiang [Tue, 17 Dec 2019 10:10:43 +0000 (10:10 +0000)]
pci: layerscape: Fix the BARs disable function

There is not any difference for disabling BARs in RC mode
between PCIe controllers with and without SRIOV.

Fixes: 80afc63fc342 ("pci: layerscape: add pci driver based on DM")
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
4 years agopci: layerscape: Fix the disabling of Expansion ROM BAR
Hou Zhiqiang [Tue, 17 Dec 2019 10:10:40 +0000 (10:10 +0000)]
pci: layerscape: Fix the disabling of Expansion ROM BAR

The software will still get non-zero Expansion ROM BAR size
even when the BAR_EN bit is cleared. The BAR_EN bit of
register EXP_ROM_BAR_MASK_RC is not working as expected,
so this patch changes to mask all the bits.

Fixes: 80afc63fc342 ("pci: layerscape: add pci driver based on DM")
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
4 years agoconfigs: ls1012afwry: Enable usb network cards support
Yinbo Zhu [Mon, 16 Dec 2019 07:07:34 +0000 (15:07 +0800)]
configs: ls1012afwry: Enable usb network cards support

Enable RTL8152, AX88179 and AX8817X USB network cards support
for ls1012afwry

Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
4 years agoconfigs: ls1088ardb: Enable usb network cards support
Yinbo Zhu [Mon, 16 Dec 2019 07:07:33 +0000 (15:07 +0800)]
configs: ls1088ardb: Enable usb network cards support

Enable RTL8152, AX88179 and AX8817X USB network cards support
for ls1088ardb

Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
4 years agoconfigs: ls1046afwry: Enable usb network cards support
Yinbo Zhu [Mon, 16 Dec 2019 07:07:32 +0000 (15:07 +0800)]
configs: ls1046afwry: Enable usb network cards support

Enable RTL8152, AX88179 and AX8817X USB network cards support
for ls1046afrwy

Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
4 years agodrivers: net: fsl_enetc: Pass on primary MAC address to Linux
Alex Marginean [Tue, 10 Dec 2019 14:55:39 +0000 (16:55 +0200)]
drivers: net: fsl_enetc: Pass on primary MAC address to Linux

Passes on the primary address used by u-boot to Linux. The code does a DT
fix-up for ENETC PFs and sets the primary MAC address in IERB. The address
in IERB is restored on ENETC PCI functions at FLR.

Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
4 years agoMerge branch '2020-01-22-master-imports'
Tom Rini [Thu, 23 Jan 2020 21:28:17 +0000 (16:28 -0500)]
Merge branch '2020-01-22-master-imports'

- Re-add U8500 platform support
- Add bcm968360bg support
- Assorted Keymile fixes
- Other assorted bugfixes

4 years agodisk: part: rename parameter of lba512_muldiv()
Heinrich Schuchardt [Thu, 16 Jan 2020 19:36:58 +0000 (20:36 +0100)]
disk: part: rename parameter of lba512_muldiv()

div_by is a misleading parameter name, when we are doing >> div_by.
Rename it to right_shift.

Reported-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
4 years agoqemu-arm: set CONFIG_SYS_BOOTM_LEN to SZ_64M
Dhananjay Phadke [Wed, 15 Jan 2020 01:41:41 +0000 (17:41 -0800)]
qemu-arm: set CONFIG_SYS_BOOTM_LEN to SZ_64M

FIT image contents can be larger than default bootm limit 8M
with initrd. Raise limit to 64MB which is commonly used
elsewhere.

Signed-off-by: Dhananjay Phadke <dphadke@linux.microsoft.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
4 years agoarm/km: remove unmaintained board kmsuv31
Holger Brunck [Mon, 13 Jan 2020 14:34:03 +0000 (15:34 +0100)]
arm/km: remove unmaintained board kmsuv31

This target is out of maintenance and can be removed.

Signed-off-by: Holger Brunck <holger.brunck@ch.abb.com>
CC: Valentin Longchamp <valentin.longchamp@ch.abb.com>
CC: Stefan Roese <sr@denx.de>
Reviewed-by: Stefan Roese <sr@denx.de>
4 years agoarm/km: remove unmaintained board SUGP1
Holger Brunck [Mon, 13 Jan 2020 14:34:02 +0000 (15:34 +0100)]
arm/km: remove unmaintained board SUGP1

This target is out of maintenance and can be removed.

Signed-off-by: Holger Brunck <holger.brunck@ch.abb.com>
CC: Valentin Longchamp <valentin.longchamp@ch.abb.com>
CC: Stefan Roese <sr@denx.de>
Reviewed-by: Stefan Roese <sr@denx.de>
4 years agoarm/km: add support for SUSE2
Holger Brunck [Mon, 13 Jan 2020 14:34:01 +0000 (15:34 +0100)]
arm/km: add support for SUSE2

This board is similar to SUV31, but the FPGA is reset concept is quite
different.

Signed-off-by: Holger Brunck <holger.brunck@ch.abb.com>
CC: Valentin Longchamp <valentin.longchamp@ch.abb.com>
CC: Stefan Roese <sr@denx.de>
Reviewed-by: Stefan Roese <sr@denx.de>
4 years agozfs: remove unused buf variable
Joel Johnson [Sat, 11 Jan 2020 16:09:34 +0000 (09:09 -0700)]
zfs: remove unused buf variable

Remove unused variable to silence compiler warning

Signed-off-by: Joel Johnson <mrjoel@lixil.net>
4 years agokm/scripts: product env and auto-reset for ramfs
Holger Brunck [Fri, 10 Jan 2020 11:55:42 +0000 (12:55 +0100)]
km/scripts: product env and auto-reset for ramfs

This patch adds the possibility in both debug and ramfs modes to
optionally load an env file from /tftpboot/$tftppath (this is ignored if
not present, so the change is backward compatible). This gives the debug
and ramfs scripts the possibility to set uboot environment variables
that were previously asked the users to manually set (nfs path in debug
and rootfs size in ramfs).

Signed-off-by: Holger Brunck <holger.brunck@ch.abb.com>
CC: Tom Rini <trini@konsulko.com>
4 years agokm/scripts: fix run ramfs and COGE5 tftppath problem
Holger Brunck [Fri, 10 Jan 2020 11:55:41 +0000 (12:55 +0100)]
km/scripts: fix run ramfs and COGE5 tftppath problem

The tftppath was not set in case of run ramfs. It worked only by chance
if was already set before.

Also check the boardname before setting the tftppath for COGE5.

Signed-off-by: Holger Brunck <holger.brunck@ch.abb.com>
CC: Tom Rini <trini@konsulko.com>
4 years agokm/common: fix for CPUWD reset reason
Rainer Boschung [Fri, 10 Jan 2020 11:47:43 +0000 (12:47 +0100)]
km/common: fix for CPUWD reset reason

The CPUWD reset reason is used for kmp204x.
And the qrio cpu reset request is configured to operate in
core reset mode.
But for the evaluation of the qrio's reset reason register
the CPUWD figures as a unit reset source rather than a core
reset source. This patch defines the CPUWD reset as a core
reset source when evaluating the reset reason register.

Signed-off-by: Rainer Boschung <rainer.boschung@ch.abb.com>
CC: Priyanka Jain <priyanka.jain@nxp.com>
4 years agoKM/kmp204x: qrio and i2c deblock code moved to common
Holger Brunck [Fri, 10 Jan 2020 11:47:42 +0000 (12:47 +0100)]
KM/kmp204x: qrio and i2c deblock code moved to common

This patch moves the qrio and i2c deblocking code to
keymile/common as it will also be used by the upcoming CENT2 board.

Signed-off-by: Holger Brunck <holger.brunck@ch.abb.com>
CC: Priyanka Jain <priyanka.jain@nxp.com>
4 years agokmp204x: do not make FPGA config error fail board_early_init_r
Holger Brunck [Fri, 10 Jan 2020 11:47:41 +0000 (12:47 +0100)]
kmp204x: do not make FPGA config error fail board_early_init_r

This prevents the board from booting which is not the expected behavior.

Signed-off-by: Valentin Longchamp <valentin.longchamp@ch.abb.com>
Signed-off-by: Holger Brunck <holger.brunck@ch.abb.com>
CC: Priyanka Jain <priyanka.jain@nxp.com>
4 years agoMAINTAINERS: Add entry for rng drivers
Sughosh Ganu [Fri, 10 Jan 2020 10:23:51 +0000 (15:53 +0530)]
MAINTAINERS: Add entry for rng drivers

Take up maintainership of random number generator drivers with
Heinrich Schuchardt as the reviewer.

Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
4 years agoremoving fdt_high from default set of variables for, dragonboard410c config
Matthias Schoepfer [Thu, 9 Jan 2020 15:53:32 +0000 (16:53 +0100)]
removing fdt_high from default set of variables for, dragonboard410c config

When using fitImage in AARCH64, the fdt is only 4 byte aligned.
According to linux kernel -> Documentation/arm64/booting.txt, the
fdt *must* be 8 byte aligned. Therefore, it is somewhat random,
if you build a kernel that the fdt is 4 or 8 byte aligned.
Removing fdt_high (or changing it to a valid 8 byte aligned
address) solves this issue.

Signed-off-by: Matthias Schoepfer <matthias.schoepfer@ithinx.io>
CC: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
4 years agoboard_init: remove meaningless increment in board_init_f_init_reserve()
Masahiro Yamada [Wed, 8 Jan 2020 11:21:17 +0000 (20:21 +0900)]
board_init: remove meaningless increment in board_init_f_init_reserve()

The base is not used in the code that follows this increment.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
4 years agobcm968360bg: add initial support
Philippe Reynes [Tue, 7 Jan 2020 19:14:17 +0000 (20:14 +0100)]
bcm968360bg: add initial support

This add the initial support of the broadcom reference
board bcm968360bg with a bcm68360 SoC.

This board has 512 MB of RAM, 256 MB of flash (nand),
2 USB port, 1 UART, and 4 ethernet ports.

Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
4 years agogpio: do not include <asm/arch/gpio.h> on ARCH_BCM68360
Philippe Reynes [Tue, 7 Jan 2020 19:14:16 +0000 (20:14 +0100)]
gpio: do not include <asm/arch/gpio.h> on ARCH_BCM68360

As no gpio.h is defined for this architecture, to avoid
compilation failure, do not include <asm/arch/gpio.h> for
arch bcm68360.

Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
4 years agogpio: bcm6345: allow to use this driver on arm bcm68360
Philippe Reynes [Tue, 7 Jan 2020 19:14:15 +0000 (20:14 +0100)]
gpio: bcm6345: allow to use this driver on arm bcm68360

This IP is also used on some arm SoC, so we allow to
use it on arm bcm68360 too.

Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
4 years agoled: bcm6858: allow to use this driver on arm bcm68360
Philippe Reynes [Tue, 7 Jan 2020 19:14:14 +0000 (20:14 +0100)]
led: bcm6858: allow to use this driver on arm bcm68360

This IP is also used on some arm SoC, so we allow to
use it on arm bcm68360 too.

Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
4 years agonand: brcmnand: add bcm68360 support
Philippe Reynes [Tue, 7 Jan 2020 19:14:13 +0000 (20:14 +0100)]
nand: brcmnand: add bcm68360 support

This adds the nand support for chipset bcm68360.

Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
4 years agospi: bcm63xx-hsspi: allow to use this driver on arm bcm68360
Philippe Reynes [Tue, 7 Jan 2020 19:14:12 +0000 (20:14 +0100)]
spi: bcm63xx-hsspi: allow to use this driver on arm bcm68360

This IP is also used on some arm SoC, so we allow to
use it on arm bcm68360 too.

Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
4 years agowatchdog: bcm6345: allow to use this driver on arm bcm68360
Philippe Reynes [Tue, 7 Jan 2020 19:14:11 +0000 (20:14 +0100)]
watchdog: bcm6345: allow to use this driver on arm bcm68360

This IP is also used on some arm SoC, so we allow to
use it on arm bcm68360 too.

Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
4 years agobcm68360: add initial support
Philippe Reynes [Tue, 7 Jan 2020 19:14:10 +0000 (20:14 +0100)]
bcm68360: add initial support

This add the initial support of the broadcom bcm68360 SoC family.

Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
4 years agoMakefile: Let mrproper remove flash.bin and flash.log
Fabio Estevam [Tue, 7 Jan 2020 18:50:32 +0000 (15:50 -0300)]
Makefile: Let mrproper remove flash.bin and flash.log

In order to generate a bootable U-Boot binary for i.MX8QXP MEK
we need to run:

$ make imx8qxp_mek_defconfig
$ make flash.bin

The resultant flash.bin and flash.log are not removed after
running 'make mrproper'.

Include these files into the CLEAN_FILES list entry so that
they can be properly deleted after 'make mrproper'.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
4 years agocmd: pxe: execute the cls command only when supported
Patrick Delaunay [Tue, 3 Dec 2019 08:38:35 +0000 (09:38 +0100)]
cmd: pxe: execute the cls command only when supported

Execute the command cls (for clear screen), when the "menu background"
keyword is present in extlinux.conf file, only if the command is supported.

This patch avoid the warning "Unknown command 'cls'"
with "menu background" in extlinux.conf when CONFIG_CMD_BMP is activated
and CONFIG_CMD_CLS not activated (default for CONFIG_DM_VIDEO).

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
4 years agotrace: provide Sphinx style comments
Heinrich Schuchardt [Wed, 1 Jan 2020 14:52:31 +0000 (15:52 +0100)]
trace: provide Sphinx style comments

Correct some function comments. Convert to Sphinx style.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
4 years agolib: ignore oid_registry_data.c file
Dario Binacchi [Tue, 31 Dec 2019 17:18:22 +0000 (18:18 +0100)]
lib: ignore oid_registry_data.c file

The file is generated by scripts/build_OID_registry based on the
include/linux/oid_registry.h file.

Signed-off-by: Dario Binacchi <dariobin@libero.it>
4 years agospl_fit.c: enable loading compressed u-boot from fit image
Klaus H. Sorensen [Wed, 11 Dec 2019 11:03:33 +0000 (11:03 +0000)]
spl_fit.c: enable loading compressed u-boot from fit image

Allow reading compressed content from fit image, even if
CONFIG_SPL_OS_BOOT is not set.

This allow booting compressed 2nd stage u-boot from fit image.

Additionally, do not print warning message if compression node is not
found, since it simply implies the content is uncompressed.

Signed-off-by: Klaus H. Sorensen <khso@prevas.dk>
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
4 years agoboard: Add new Samsung "stemmy" board based on ST-Ericsson U8500
Stephan Gerhold [Sat, 4 Jan 2020 17:45:19 +0000 (18:45 +0100)]
board: Add new Samsung "stemmy" board based on ST-Ericsson U8500

The ST-Ericsson U8500 SoC has been used in mass-production for
some Android smartphones released around 2012.
In particular, Samsung has released more than 5 different
smartphones based on U8500, e.g.

  - Samsung Galaxy S III mini (GT-I8190) "golden"
  - Samsung Galaxy S Advance (GT-I9070)  "janice"
  - Samsung Galaxy Xcover 2 (GT-S7710)   "skomer"

and a few others.

Mainline Linux has great support for the Ux500 SoC, so these
smartphones can also run Linux mainline quite well.

Unfortunately, the original Samsung bootloader used on these devices
has limitations that prevent booting Linux mainline directly.
It keeps the L2 cache enabled, which causes Linux to crash very early,
shortly after decompressing the kernel.

Using U-Boot allows to circumvent these limitations. We can let the
Samsung bootloader chain-load U-Boot and U-Boot locks the L2 cache
before booting into Linux. U-Boot has several other advantages
- it supports device-trees directly and we are no longer limited to
flashing Android boot images through Samsung's proprietary download
mode.

The Samsung "stemmy" board covers all Samsung devices based on U8500.
Add minimal support for "stemmy". For now only UART is supported but
this will be extended later.

Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
4 years agoMAINTAINERS: Add ARM U8500
Stephan Gerhold [Sat, 4 Jan 2020 17:45:18 +0000 (18:45 +0100)]
MAINTAINERS: Add ARM U8500

Add myself as maintainer for ST-Ericsson U8500 SoC to MAINTAINERS.
Linus Walleij usually reviews all Ux500 related patches,
so add him as a reviewer.

Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
4 years agoarm: Add support for ST-Ericsson U8500 SoC
Stephan Gerhold [Sat, 4 Jan 2020 17:45:17 +0000 (18:45 +0100)]
arm: Add support for ST-Ericsson U8500 SoC

The NovaThor U8500 SoC was released by ST-Ericsson in 2011.
It was used for some development boards like the CALAO Systems
Snowball SBC, but mass production was primarily for Android
smartphones like the Samsung Galaxy S III mini.

Previous support for U8500 was removed in
commit 68282f55b846 ("arm: Remove unused ST-Ericsson u8500 arch")
since none of the boards were converted to generic boards
before the deadline.

The new code does not have much in common with the previous code.
I have completely rewritten everything, embracing the Driver Model
and device trees wherever possible.

The U8500 support is a bit more minimal for now - my primary
use case is to use U-Boot as alternative bootloader for some of the
U8500 Samsung smartphones. At the moment U-Boot is chain-loaded from
the original Samsung bootloader. A side effect of this is that we
can (temporarily) get away without implementing some functionality
- e.g. all clocks are already enabled by the original bootloader.

More functionality will be added in future patches.

Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: John Rigby <john.rigby@linaro.org>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
4 years agoarm: dts: Import device tree for ST-Ericsson Ux500
Stephan Gerhold [Sat, 4 Jan 2020 17:45:16 +0000 (18:45 +0100)]
arm: dts: Import device tree for ST-Ericsson Ux500

from https://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson.git/
tag "ux500-armsoc-v5.6-2"
commit 224bf0fe7292 ("ARM: dts: ux500: samsung-golden: Add Bluetooth")

(queued for merge in Linux 5.6)

Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
4 years agotimer: Add driver for Nomadik Multi Timer Unit (MTU)
Stephan Gerhold [Sat, 4 Jan 2020 17:45:15 +0000 (18:45 +0100)]
timer: Add driver for Nomadik Multi Timer Unit (MTU)

The Nomadik Multi Timer Unit (MTU) provides 4 decrementing
free-running timers. It is used in ST-Ericsson Ux500 SoCs.

The driver uses the first timer to implement UCLASS_TIMER.

Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
4 years agoenv: another attempt at fixing SPL build failures
Rasmus Villemoes [Sun, 15 Dec 2019 22:29:39 +0000 (22:29 +0000)]
env: another attempt at fixing SPL build failures

I'm also seeing the build failure that commit

7d4776545b env: solve compilation error in SPL

tried to fix, namely that the reference to env_flags_validate from
env_htab cannot be satisfied when flags.o is not built in. However,
that commit got reverted by

d90fc9c3de Revert "env: solve compilation error in SPL"

Necessary, but not sufficient conditions to see this are

CONFIG_SPL=y (obviously)
CONFIG_SPL_ENV_SUPPORT=n (so flags.o does not get compiled)
CONFIG_SPL_LIBCOMMON_SUPPORT=y (so env/built-in.o is part of the SPL link)

Now, these are satisfied for e.g. imx6q_logic_defconfig. But that
builds just fine, and spl/u-boot-spl.map lists .data.env_htab among
the discarded (garbage collected) sections. Yet, on our
mpc8309-derived board, we do see the build failure, so perhaps the
linker works a bit differently on ppc than on ARM, or there's yet some
other configuration option needed to observe the break.

This is another attempt at solving it, which also cleans up
env/Makefile a bit: Introduce a def_bool y symbol CONFIG_ENV_SUPPORT
which complements CONFIG_(SPL/TPL)_SUPPORT. Then use
CONFIG_$(SPL_TPL_)ENV_SUPPORT to decide whether to include the five
basic env/*.o files. For attr.o, flags.o and callback.o, this
shouldn't change anything. Also, common.o and env.o still get
unconditionally built for U-boot proper. But for TPL/SPL, those two
are only included if CONFIG_(SPL/TPL)_SUPPORT is set.

Having that symbol should also allow simplifying conditionals such as

#if !defined(CONFIG_SPL_BUILD) || CONFIG_IS_ENABLED(ENV_SUPPORT)

found in drivers/reset/reset-socfpga.c to just
CONFIG_IS_ENABLED(ENV_SUPPORT).

Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
4 years agoconfigs: Resync with savedefconfig
Tom Rini [Wed, 22 Jan 2020 18:38:00 +0000 (13:38 -0500)]
configs: Resync with savedefconfig

Rsync all defconfig files using moveconfig.py

Signed-off-by: Tom Rini <trini@konsulko.com>
4 years agoMerge https://gitlab.denx.de/u-boot/custodians/u-boot-marvell
Tom Rini [Tue, 21 Jan 2020 23:10:28 +0000 (18:10 -0500)]
Merge https://gitlab.denx.de/u-boot/custodians/u-boot-marvell

- Clearfog: Add run-time board detection with TLV EEPROM support
  (Baruch)

4 years agoARM: mvebu: clearfog: add Clearfog Base serdes configuration
Baruch Siach [Mon, 20 Jan 2020 12:20:15 +0000 (14:20 +0200)]
ARM: mvebu: clearfog: add Clearfog Base serdes configuration

Clearfog Base carrier uses serdes lane #5 as USB host. Use EEPROM stored
device identification to configure the serdes accordingly when
available.

Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
4 years agoARM: mvebu: clearfog: add Clearfog GTR support
Baruch Siach [Mon, 20 Jan 2020 12:20:14 +0000 (14:20 +0200)]
ARM: mvebu: clearfog: add Clearfog GTR support

Select the serdes configuration table based on the platform identity
read from EEPROM TLV data. Clearfog GTR needs a slightly different
serdes configuration.

Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
4 years agoARM: mvebu: clearfog: run-time selection of DT file
Baruch Siach [Mon, 20 Jan 2020 12:20:13 +0000 (14:20 +0200)]
ARM: mvebu: clearfog: run-time selection of DT file

Set the kernel device-tree file (fdtfile environment variable) based on
run-time detection of the platform.

Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>