dma: ti: k3-udma: Fix error handling for setup_resources() in udma_probe()
In udma_probe() the return value of setup_resources() is stored in the
u32 "ch_count" member of "struct udma_dev", due to which any negative
return value which indicates an error is masked.
Fix this by storing the return value of setup_resources() in the already
declared integer variable "ret", followed by assigning it to the "ch_count"
member of "struct udma_dev" in case of no error.
While at it, change the "return ret" at the end of udma_probe() to a
"return 0", to explicitly indicate that probe was successful.
Fixes: a8837cf43839 ("dma: ti: k3-udma: Query DMA channels allocated from Resource Manager") Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com> Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
arm: mach-k3: am62: Fixup thermal zone critical points
Read the max temperature for the SoC temperature grade from the hardware
and change the critical trip nodes on each thermal zone of FDT at
runtime so they are correct with the hardware value for its grade.
Signed-off-by: Joao Paulo Goncalves <joao.goncalves@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Tom Rini [Mon, 4 Mar 2024 17:02:49 +0000 (12:02 -0500)]
Merge patch series "Introduce initial TI's J784S4 and AM69 support"
Apurva Nandan <a-nandan@ti.com> says:
Hello Everyone!
This series will introduce basic support (SD and UART) support for Texas
Instruments J784S4 EVM.
The J784S4 SoC device tree patches are taken from kernel patch submissions
and will be updated as they are accepted and merged to the kernel tree.
All other patches are specific to SPL and u-boot and do not have
dependency on other trees. Appreciate a review for acceptance to u-boot
tree.
Here are some of the salient features of the J784S4 automotive grade
application processor:
The J784S4 SoC belongs to the K3 Multicore SoC architecture
platform, providing advanced system integration in automotive,
ADAS and industrial applications requiring AI at the network edge.
This SoC extends the K3 Jacinto 7 family of SoCs with focus on
raising performance and integration while providing interfaces,
memory architecture and compute performance for multi-sensor, high
concurrency applications.
Some highlights of this SoC are:
* Up to 8 Cortex-A72s, four clusters of lockstep capable dual Cortex-R5F MCUs,
4 C7x floating point vector DSPs with Matrix Multiply Accelerator(MMA) for
deep learning and CNN.
* 3D GPU: Automotive grade IMG BXS-4-64 MC1
* Vision Processing Accelerator (VPAC) with image signal processor and Depth
and Motion Processing Accelerator (DMPAC)
* Three CSI2.0 4L RX plus two CSI2.0 4L TX, two DSI Tx, one eDP/DP and one
DPI interface.
* Integrated gigabit ethernet switch, up to 8 ports (TDA4VH), two ports
support 10Gb USXGMII; Two 4 lane PCIe-GEN3 controllers, USB3.0 Dual-role
device subsystems, Up to 20 MCANs, among other peripherals.
See J784S4 Technical Reference Manual (SPRUJ52 - JUNE 2022)
for further details: http://www.ti.com/lit/zip/spruj52
In addtion, the J784S4 EVM board is designed for TI J784S4 SoC. It
supports the following interfaces:
* 32 GB DDR4 RAM
* x2 Gigabit Ethernet interfaces capable of working in Switch and MAC mode
* x1 Input Audio Jack, x1 Output Audio Jack
* x1 USB2.0 Hub with two Type A host and x1 USB 3.1 Type-C Port
* x2 4L PCIe connector
* x1 UHS-1 capable micro-SD card slot
* 512 Mbit OSPI flash, 1 Gbit Octal NAND flash, 512 Mbit QSPI flash,
UFS flash.
* x6 UART through UART-USB bridge
* XDS110 for onboard JTAG debug using USB
* Temperature sensors, user push buttons and LEDs
* 40-pin User Expansion Connector
* x2 ENET Expansion Connector, x1 GESI expander, x2 Display connector
* x1 15-pin CSI header
* x6 MCAN instances
Dasnavis Sabiya [Fri, 23 Feb 2024 20:21:52 +0000 (01:51 +0530)]
configs: am69_sk: Add defconfig for AM69 SK board
Add defconfig for AM69 SK A72 and R5 configuration.
This inlcudes and modifies the J784S4 EVM defconfigs:
j784s4_evm_a72_defconfig -> am69_sk_a72_defconfig
j784s4_evm_r5_defconfig -> am69_sk_r5_defconfig
Signed-off-by: Dasnavis Sabiya <sabiya.d@ti.com> Signed-off-by: Apurva Nandan <a-nandan@ti.com> Reviewed-by: Andrew Davis <afd@ti.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # AM69-SK
Tom Rini [Mon, 4 Mar 2024 16:50:26 +0000 (11:50 -0500)]
Merge patch series "board: beagle: Enable 32k and debounce configuration and fixups"
Nishanth Menon <nm@ti.com> says:
Hi,
Rev 2 of the series.
This is a follow up from [1] - Without the 32k crystal configuration,
wlan doesn't work. Debounce is needed for HDMI Hot plug detect(hpd)
gpio interrupt not storming.
At least the 32k configuration has been done for toradex and phytec
boards, follow similar model of programming.
Changes from V2:
- Removed depedency on [2] - depending on which way
the merge sequence goes, one of the series will need a rebase.
- Added a patch for a bug that Jan noticed
- Fixup for the fat finger missing 0x in 0x4080 :(
Nishanth Menon [Tue, 20 Feb 2024 18:39:52 +0000 (12:39 -0600)]
board: beagle: beagleplay: env: Drop usb and pxe as boot targets
We had enabled USB and network pxe boot with the hope to get it all
merged on time. However, it has not panned out. Drop usb and pxe boot
else bootflow scan -l throws in:
a) Unknown uclass 'usb' in label
b) Crashes when attempting pxe - cpsw/mdio driver apparently has missing
error handling of what ever form. This is the one that Jan noticed in
his log.
We can enable these on a later date once things are working.
Cc: Roger Quadros <rogerq@kernel.org> Reported-by: Jan Kiszka <jan.kiszka@siemens.com> Closes: https://lore.kernel.org/all/782ea2c0-eef5-478d-a122-cc6e2d066762@siemens.com/ Signed-off-by: Nishanth Menon <nm@ti.com>
Nishanth Menon [Tue, 20 Feb 2024 18:39:48 +0000 (12:39 -0600)]
board: beagle: beagleplay: Enable 32k crystal
Enable the external 32k crystal similar to that found on other
production AM62X board. The trim settings for the crystal is board
dependent, so the sequences tend to be board specific. Since this is
a configuration that needs to be done prior to DM managing the system
and all other muxes get set, do the same from R5 context.
Tested-by: Robert Nelson <robertcnelson@gmail.com> Signed-off-by: Nishanth Menon <nm@ti.com>
Tom Rini [Mon, 4 Mar 2024 15:13:01 +0000 (10:13 -0500)]
Merge branch '2024-03-02-assorted-updates' into next
- Assorted MediaTek, ASPEED, xenguest, s5p4418 and qemu-arm fixes
- Assorted test fixes/updates/additions.
- A few bootstd/related fixes.
- Remove common.h from some files
- Drop reiserfs
- A few other assorted fixes throughout the tree.
Masahisa Kojima [Fri, 1 Mar 2024 04:38:39 +0000 (13:38 +0900)]
board: synquacer: developerbox: add myself as maintainer
Add myself as maintainer for SynQuacer Developerbox,
as I'm currently working on it.
This commit also removes Jassi from maintainer since he
no longer has a Developerbox.
Ivan Orlov [Fri, 23 Feb 2024 17:14:20 +0000 (17:14 +0000)]
cmd: eeprom: Fix config dependency
We should have CONFIG_DM_I2C or CONFIG_SYS_I2C_LEGACY enabled in
order for `cmd/eeprom.c` to compile as it depends on the i2c functions
which are not compiled otherwise. Update the Kconfig entry for the
'eeprom' command correspondingly.
Signed-off-by: Ivan Orlov <ivan.orlov@codethink.co.uk> Reviewed-by: Tom Rini <trini@konsulko.com>
Without the '-undef' option, the 'linux' string in .env files is
replaced with the string '1 '.
For example, in the board/armadeus/opos6uldev/opos6uldev.env file,
kernelimg=opos6ul-linux.bin
becomes
kernelimg=opos6ul-1 .bin
in the include/generated/env.in file.
That's because 'linux' is a System-specific Predefined Macros. [1]
Nam Cao [Wed, 21 Feb 2024 12:41:44 +0000 (13:41 +0100)]
bootstd: support scanning a single partition
The "bootflow" command currently doesn't support scanning a single
partition. This is inconvenient in setups with multiple bootable
partitions within a single disk, but only one is desired.
Support scanning a single disk partition. Specifically, support the
syntax:
bootflow scan mmc1:4
which scans only mmc device 1, partition 4.
Dan Carpenter [Wed, 21 Feb 2024 06:26:21 +0000 (09:26 +0300)]
bootstd: fix build error when CONFIG_MMC is disabled
This code assumes that CONFIG_MMC and it causes a build error when
the config is disabled.
aarch64-linux-gnu-ld.bfd: test/boot/bootstd_common.o: in function `bootstd_test_check_mmc_hunter':
test/boot/bootstd_common.c:83:(.text.bootstd_test_check_mmc_hunter+0x70):
undefined reference to `_u_boot_list_2_bootdev_hunter_2_mmc_bootdev_hunter'
Fixes: 66e3dce78750 ("bootstd: Allow hunting for a bootdev by label") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Dan Carpenter [Wed, 21 Feb 2024 06:26:09 +0000 (09:26 +0300)]
bootflow: Fix build error when BOOTMETH_CROS is disabled
The bootflow testing assumes that BOOTMETH_CROS is enabled but it
might not be which leads to a build error.
aarch64-linux-gnu-ld.bfd: test/boot/bootflow.o: in function `prep_mmc_bootdev':
test/boot/bootflow.c:549:(.text.prep_mmc_bootdev+0x1c8):
undefined reference to `_u_boot_list_2_driver_2_bootmeth_cros'
Fixes: d08db02d2d3d ("bootstd: Add a test for bootmeth_cros") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
While fat_exists() reports directories and files as existing
ext4fs_exists() only recognizes files. This lead to errors
when using systemd-boot with an ext4 file-system.
Change ext4fs_exists() to find any type of inode:
files, directories, symbolic links.
Fixes: a1596438a689 ("ext4fs ls load support") Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Peter Robinson [Sun, 18 Feb 2024 23:59:35 +0000 (23:59 +0000)]
fs: drop reiserfs
It was only included by a single board which doesn't appear to have
ever used it for any default use cases so drop the filesystem now
that isn't used by any in-tree configurations.
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Peter Robinson [Sun, 18 Feb 2024 23:59:34 +0000 (23:59 +0000)]
configs: ethernut5: Drop reiserfs
This is the only board that enables it, and looking generally I don't
believe it's used. All use cases I could fine for the board rub by
default off jffs on the nand and it doesn't enable USB storage.
Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Cc: egnite GmbH <info@egnite.de>
Jonas Karlman [Sat, 17 Feb 2024 13:19:41 +0000 (13:19 +0000)]
dm: core: Fix address translation in devfdt_get_addr_index()
During address translation #address/size-cells props are expected to
apply to child nodes. However, devfdt_get_addr_index() incorrectly use
the parent offset of the udevice parent instead of getting the offset of
the node parent. This will work in most cases when there is only one
udevice tied to a node.
On e.g. an Orange Pi R1 Plus TLS board the dwc3-generic (parent) and
dwc3-generic-host (child) udevice is tied to the same node.
In that case both the offset and parent values end up being the same.
As a result, the #address/size-cells props intended for child nodes
incorrectly gets applied to the node itself resulting in wrong addr
being returned, 0x0 instead of 0xff600000.
The following can be seen on console:
dwc3-generic-host usb@ff600000: this is not a DesignWare USB3 DRD Core
dwc3-generic-host usb@ff600000: failed to initialize core
Fix this by using the offset of the parent node and not the offset to
the node the parent udevice is tied to.
Jonas Karlman [Sat, 17 Feb 2024 12:08:40 +0000 (12:08 +0000)]
pinctrl: Check pinconfig nodes pre-reloc status recursively
Pinconfig nodes normally bind recursively with PINCTRL_FULL and
PINCONF_RECURSIVE enabled. However, during U-Boot proper pre-relocation
any node marked with e.g. bootph-all will not bind unless its parent is
also marked for pre-reloc.
group1 {
pinconf1 {
bootph-all;
};
};
This cause the following warning message to be shown during U-Boot
proper pre-reloc stage on Rockchip devices, e.g on RK3568:
Check pinconfig nodes pre-reloc status recursively to fix this and to
make pinconfig_post_bind work same at both U-Boot proper pre-reloc and
at TPL/SPL stage.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Reviewed-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Bryan Brattlof [Mon, 4 Mar 2024 12:12:57 +0000 (17:42 +0530)]
Makefile: remove hardcoded device tree source directory
Some boards that choose to utilize the OF_UPSTREAM directory for their
device tree files will need to specify that directory instead of the
traditional arch/$(ARCH)/dts/* path.
Include the correct path to the board's dtbs depending on if OF_UPSTREAM
is selected or not.
Sean Anderson [Thu, 15 Feb 2024 17:12:18 +0000 (12:12 -0500)]
boot: Only define checksum algos when the hashes are enabled
Don't define checksum algos when the underlying hashes are not enabled.
This allows disabling these hashes in SPL (or U-Boot).
Fixes: d16b38f4270 ("Add support for SHA384 and SHA512") Fixes: 646257d1f40 ("rsa: add sha256-rsa2048 algorithm") Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Thomas Weißschuh [Tue, 13 Feb 2024 17:13:28 +0000 (18:13 +0100)]
log: fixup log_head after relocating global data
When `gd` is relocated during `spl_relocate_stack_gd()` the
doubly-linked circular list in the `log_head` member is broken.
The last element of the list should point back to the initial
`list_head`, but as the initial `list_head` is moved the pointer becomes
stale. As a result the loop in `log_dispatch` would never finish.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
cmd: setexpr: fix no matching string in gsub return empty value
In gsub, when the destination string is empty, the string 't' is
provided and the regular expression doesn't match, then the final result
is an empty string.
Example:
=> echo ${foo}
=> setenv foo
=> setexpr foo gsub e a bar
=> echo ${foo}
=>
The variable ${foo} should contain "bar" and the lack of match shouldn't
be considered an error.
This patch fixes the erroneous behavior by removing the return
statement and breaking out of the loop in case of lack of match.
Masahisa Kojima [Thu, 8 Feb 2024 02:33:44 +0000 (11:33 +0900)]
FWU: developerbox: read boot index from NOR flash
The FWU Multi Bank Update feature allows the platform to boot the
firmware images from one of the partitions(banks).
On the Developerbox, SCP-firmware running on the SCB(Cortex-M3)
passes the value of the boot index on the NOR flash.
Add a function to read the boot index value from the NOR flash.
Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Alexander Gendin <agendin@matrox.com> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Igor Opaniuk [Thu, 1 Feb 2024 12:40:54 +0000 (13:40 +0100)]
qemu-arm: round down memory to multiple of 2MB for LPAE
QEMU's -m option can take fractional megabyte values,
and lowest granularity seems to be 0x2000.
For example, run qemu with amount of memory set to 100005k (0x61A9400):
When LPAE is enabled, 1:1 mapping is created using 2 MB blocks.
In case amount of memory provided to QEMU is not multiple
of 2 MB, hang occurs during MMU initialization.
Stefan Bosch [Fri, 26 Jan 2024 12:50:56 +0000 (12:50 +0000)]
arm: s5p4418: fix relocation of vectors
The header (NSIH) used for the s5p4418-SoC is not loaded into RAM by the
2nd-bootloader, see boot0.h. Therefore, use an adapted version of
relocate_vectors which relocates the vectors after the header (at _start)
instead of the 'dummy'-vectors at the start of the header (at
__image_copy_start).
Signed-off-by: Stefan Bosch <stefan_b@posteo.net> Reviewed-by: Minkyu Kang <mk7.kang@samsung.com>
Stefan Bosch [Fri, 26 Jan 2024 12:50:55 +0000 (12:50 +0000)]
common: board_f: change calculation of gd->mon_len to fix s5p4418 reloc
ARCH_NEXELL: Change calculation of monitor length (gd->mon_len) to fix
relocation at boards with s5p4418-SoC (ARCH_NEXELL). At s5p4418, _start
is after the header (NSIH). Therefore the monitor length has to be
calculated using __image_copy_start instead of _start in order the
whole monitor code is relocated.
Peng Fan [Fri, 26 Jan 2024 10:29:38 +0000 (18:29 +0800)]
xen: xenguest_arm64: map all VIRTIO MMIO region
When run `virtio scan` on i.MX95, there is abort when accessing virtio
mmio region. The issue is the mmio region is not mapped. So let's map
all virtio mmio regions.
Svyatoslav Ryhel [Thu, 25 Jan 2024 20:16:54 +0000 (22:16 +0200)]
boot: pxe_utils: skip fdt setup in case legacy kernel is booted
Currently, if boot with extlinux.conf and do not set the fdt
U-Boot will provide its own device tree. This behavior is
beneficial if the U-Boot device tree is in sync with Linux,
but it totally halts the booting of pre-dtb kernels (3.4 for
example) since it uses ATAGs. To fix this, pass `-` in the
fdt extlinux field as a signal that no tree should be used.
Tom Rini [Fri, 1 Mar 2024 18:54:49 +0000 (13:54 -0500)]
Merge https://source.denx.de/u-boot/custodians/u-boot-snapdragon into next
- Reworks Qualcomm support to be more generic, dropping board specific
build targets and relying on DT as the only source of truth
- Switches all Qualcomm devices to use upstream devicetree
Caleb Connolly [Fri, 1 Mar 2024 15:00:24 +0000 (15:00 +0000)]
clk/qcom: apq8016: allow apq8016_clk_init_uart() to be called externally
When U-Boot as running as the first stage bootloader on MSM8916 devices,
early debug UART requires turning on the clocks (for some reason the
pre-loader turns them off?!).
To simplify developing for this platform, allow the
apq8016_clk_init_uart() function to be called externally. Developers can
call this from the serial_msm debug uart driver to configure the clocks
before the driver model is available.
As it is only possible to enable early debug UART in custom builds of
U-Boot, this solution at least gives developers the option.
Caleb Connolly [Mon, 26 Feb 2024 17:26:40 +0000 (17:26 +0000)]
dts: msm8996: replace with upstream DTS
Drop the U-Boot specific dragonboard820c.dts file in favour of the
upstream apq8096-db820c.dts and an additional -u-boot.dtsi with the
U-Boot specific additions.
Caleb Connolly [Mon, 26 Feb 2024 17:26:36 +0000 (17:26 +0000)]
dts: msm8916: replace with upstream DTS
Drop the U-Boot specific dragonboard410c.dts in favour of the upstream
msm8916-sbc.dts. No additional changes are needed to this DTS for U-Boot
support.
Caleb Connolly [Mon, 26 Feb 2024 17:26:30 +0000 (17:26 +0000)]
doc: board/qualcomm: link to APQ8016 TRM
The MSM8916/APQ8016 Technical Reference Manual is publicly available and
contains a lot of useful register maps for many core parts of the SoC.
Include an archive.org link to it in the dragonboard410c documentation.
Caleb Connolly [Mon, 26 Feb 2024 17:26:29 +0000 (17:26 +0000)]
doc: board/qualcomm: document generic targets
Replace the board specific docs with a generic board.rst file which
documents the build/boot process for the sdm845 and qcs404 boards now
that the only differences are the DTB in use.
At the same time, create a debugging page to document some useful
snippets and tips for working with Qualcomm platforms.
Caleb Connolly [Mon, 26 Feb 2024 17:26:28 +0000 (17:26 +0000)]
board: qcs404-evb: drop board code
This board is entirely supported by the generic arch code and DTS. The
board code used to handle turning on the vbus regulator, however this is
now handled via DT.
With this, the board specific defconfig is also no longer needed, so
drop it as well.
Caleb Connolly [Mon, 26 Feb 2024 17:26:27 +0000 (17:26 +0000)]
mach-snapdragon: carve out no-map regions
On Qualcomm platforms, the TZ may already have certain memory regions
under protection by the time U-Boot starts. There is a rare case on some
platforms where the prefetcher might speculatively access one of these
regions resulting in a board crash (TZ traps and then resets the board).
We shouldn't be accessing these regions from within U-Boot anyway, so
let's mark them all with PTE_TYPE_FAULT to prevent any speculative
access and correctly trap in EL1 rather than EL3.
Some lower level FDT functions are used here relying on some assumptions
about how Qualcomm devicetrees are laid out (#address/size-cells being 2
for reserved-memory), as this is the only way to make this acceptably
fast enough with dcache off. The full fat implementation takes 1800ms on
SDM845, the implementation in this patch takes <1.
Caleb Connolly [Mon, 26 Feb 2024 17:26:26 +0000 (17:26 +0000)]
mach-snapdragon: generate fdtfile automatically
With just a few basic rules, we can generate the $fdtfile environment
variable to match the format used in Linux. This uses the root
compatible property inside u-boot, with specific handling for the
Dragonboard845c which is a special case, and for the qrb robotics
boards.
This is known to work on supported platforms, and lets us avoid having a
big lookup table.
Caleb Connolly [Mon, 26 Feb 2024 17:26:25 +0000 (17:26 +0000)]
mach-snapdragon: dynamic load addresses
Heavily inspired by Apple board code. Use the LMB allocator to configure
load addresses at runtime, and implement a lookup table for selecting a
devicetree.
As some Qualcomm RBx boards have different RAM capacities and base
addresses, it isn't possible to hardcode these regions.
Caleb Connolly [Mon, 26 Feb 2024 17:26:24 +0000 (17:26 +0000)]
mach-snapdragon: generalise board support
Historically, Qualcomm boards have relied on heavy hardcoding in U-Boot,
in many cases to the specific SoC but also to the board itself (e.g.
memory map). This has been largely resolved by modernising the Qualcomm
drivers in U-Boot, however the board code still largely follows this
model.
This patch removes the board specific memory maps and duplicated board
init code, replacing it with generic init code.
The memory map is now built at runtime based on data read from DT, this
allows for the memory map to be provided without having to recompile
U-Boot. Support is also added for booting with appended DTBs, so that
the first-stage bootloader can populate the memory map for us.
The sdm845 specific init code is dropped entirely, it set an environment
variable depending on if a button was pressed, but this variable wasn't
used in U-Boot, and could be written to use the button command instead.
The KASLR detection is also dropped as with appended dtb, the kaslr seed
can be read directly from the DTB passed to U-Boot.
A new qcom_defconfig is added, with the aim of providing a generic
U-Boot configuration that will work on as many Qualcomm boards as
possible. It replaces the defconfig files for the Dragonboard 845c,
Galaxy S9, and QCS404 EVB. For now the db410c and 820c are excluded as
they still have some board code left.
Similarly, the config headers for db845c, starqltechn, and qcs404-evb
are replaced by a single qcom header.
The previously db410c-specific board_usb_init() function is made to be
generic and is added to mach-snapdragon. While we lack proper modelling
for USB configuration, using a well-known named pinctrl state is a
reasonably generic middleground, and works using upstream DT. This
function will do nothing unless the USB node has a pinctrl state named
"device", in which case it will be set when entering USB peripheral
mode.
Caleb Connolly [Mon, 26 Feb 2024 17:26:23 +0000 (17:26 +0000)]
board: dragonboard820c: use LINUX_KERNEL_IMAGE_HEADER
db820c predated support for prepending the kernel image header
automatically, drop it's custom linker script and head.S in favour of
this generic support.
Caleb Connolly [Mon, 26 Feb 2024 17:26:22 +0000 (17:26 +0000)]
board: dragonboard410c: import board code from mach-snapdragon
Some of the db410c board support code was written to be generic and
placed in mach-snapdragon. However, as the db410c is the only board
using this, move the code out of mach-snapdragon. This makes is more
obvious what code is relevant for which targets and helps tidy things up
a little more.
Caleb Connolly [Mon, 26 Feb 2024 17:26:19 +0000 (17:26 +0000)]
pinctrl: qcom: apq8016: init pre-reloaction
On the DB410c we support running as a first stage bootloader. This
requires initialising the GPIOs which are muxed to UART before they can
be used. Add DM_FLAG_PRE_RELOC to the apq8016 pinctrl driver to ensure
that we do this early enough.
This is required to prevent the first few lines of UART log from being
dropped.
Caleb Connolly [Mon, 26 Feb 2024 17:26:17 +0000 (17:26 +0000)]
pinctrl: qcom: stub support for special GPIOs
Most platforms have a handful of "special" GPIOs, like the MMC
clock/data lanes, UFS reset, etc. These don't follow the usual naming
scheme of "gpioX" and also have unique capabilities and registers. We
can get away without supporting them all for now, but DT compatibility
is still an issue.
Add support for allowing these to be specified after the other pins, and
make all pinmux/pinconf calls for them nop.
Caleb Connolly [Mon, 26 Feb 2024 17:26:15 +0000 (17:26 +0000)]
gpio: qcom_pmic: add pinctrl driver
Introduce a basic pinctrl driver for the SPMI PMIC GPIOs. This is
necessary to make proper use of upstream DT bindings specifically on the
dragonboard410c where they're used to switch between USB host and device
modes.
Only support for driving the pins as output low or high is enabled for
now.
To minimise duplicated code and allow for sharing common DT data, the
pinctrl driver is initialised as a child of the existing GPIO driver.
Caleb Connolly [Mon, 26 Feb 2024 17:26:14 +0000 (17:26 +0000)]
gpio: qcom_pmic: add a quirk to skip GPIO configuration
Some platforms hard reset when attempting to configure PMIC GPIOs. Add
support for quirks specified in match data with a single quirk to skip
this configuration. We rely on the GPIO already be configured correctly,
which is always the case for volume up (the only current user of these
GPIOs).
This is not expected behaviour but appears to be due to a U-Boot
specific bug. This quirk at least allows for the volume buttons to be
used on platforms where this bug is apparent.
Caleb Connolly [Mon, 26 Feb 2024 17:26:12 +0000 (17:26 +0000)]
serial: msm: fix clock handling and pinctrl
Use the modern helpers to fetch the clock and use the correct property
("clocks" instead of "clock"). Drop the call to pinctrl_select_state()
as no boards have a "uart" pinctrl state and this prints confusing
errors.
projects / u-boot.git / log