]> git.dujemihanovic.xyz Git - u-boot.git/log
u-boot.git
12 years agospl_mmc: Make FAT checks / calls guarded with CONFIG_SPL_FAT_SUPPORT
Tom Rini [Fri, 10 Aug 2012 16:27:14 +0000 (09:27 -0700)]
spl_mmc: Make FAT checks / calls guarded with CONFIG_SPL_FAT_SUPPORT

Signed-off-by: Tom Rini <trini@ti.com>
12 years agoMakefile: Move SPL files to clobber, remove from clean
Tom Rini [Mon, 13 Aug 2012 19:18:34 +0000 (12:18 -0700)]
Makefile: Move SPL files to clobber, remove from clean

The 'clean' target has been removing all of spl but not u-boot itself.
For consistency and ease of testing, only remove SPL binaries / maps in
the clobber target, just like for full U-Boot

Signed-off-by: Tom Rini <trini@ti.com>
12 years agoFAT: Make it possible to read from any file position
Benoît Thébaudeau [Tue, 18 Sep 2012 08:14:56 +0000 (08:14 +0000)]
FAT: Make it possible to read from any file position

When storage devices contain files larger than the embedded RAM, it is
useful to be able to read these files by chunks, e.g. for a software
update to the embedded NAND Flash from an external storage device (USB
stick, SD card, etc.).

Hence, this patch makes it possible by adding a new FAT API to read
files from a given position. This patch also adds this feature to the
fatload command.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Cc: Wolfgang Denk <wd@denx.de>
Signed-off-by: Tom Rini <trini@ti.com>
12 years agoenv: checkpatch clean env_fat
Igor Grinberg [Sun, 23 Sep 2012 05:25:21 +0000 (05:25 +0000)]
env: checkpatch clean env_fat

env_fat has several checkpatch warnings - clean those up.

Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
12 years agoenv: remove duplicated env_get_char_spec()
Igor Grinberg [Sun, 23 Sep 2012 04:39:16 +0000 (04:39 +0000)]
env: remove duplicated env_get_char_spec()

env_fat and env_remote have an implementation of env_get_char_spec()
function that is not different than the default.
Remove the duplicated code.

Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
12 years agoREADME.commands: Document what UNDEF_SYM does
Tom Rini [Thu, 20 Sep 2012 06:02:43 +0000 (06:02 +0000)]
README.commands: Document what UNDEF_SYM does

Changes in v2:
- Reword a bit more

Signed-off-by: Tom Rini <trini@ti.com>
12 years agopatman: Use reverse order for changelog
Otavio Salvador [Sat, 18 Aug 2012 07:46:04 +0000 (07:46 +0000)]
patman: Use reverse order for changelog

Specially when many revisions are need for a patchset, the most
interesting information is about the last set of changes so we output
the changelog in reverse order to easy identification of most recent
change set.

Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Acked-by: Simon Glass <sjg@chromium.org>
12 years agomalloc: remove extern declarations of malloc_bin_reloc() in board.c files
Daniel Schwierzeck [Sun, 3 Jun 2012 12:40:04 +0000 (12:40 +0000)]
malloc: remove extern declarations of malloc_bin_reloc() in board.c files

Declare malloc_bin_reloc() in malloc.h and remove all extern declarations
in various board.c files to get rid of one checkpatch.pl warning.

Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Andreas Bießmann <andreas.devel@gmail.com>
Cc: Jason Jin <Jason.jin@freescale.com>
Cc: Macpaul Lin <macpaul@andestech.com>
Cc: Daniel Hellstrom <daniel@gaisler.com>
Acked-by: Andreas Bießmann <andreas.devel@gmail.com>
12 years agoMerge branch 'master' of git://git.denx.de/u-boot-video
Tom Rini [Tue, 25 Sep 2012 23:18:22 +0000 (16:18 -0700)]
Merge branch 'master' of git://git.denx.de/u-boot-video

12 years agocmd_part: add partition-related command
Stephen Warren [Fri, 21 Sep 2012 09:51:01 +0000 (09:51 +0000)]
cmd_part: add partition-related command

This implements the following:

part uuid mmc 0:1
  -> print partition UUID
part uuid mmc 0:1 uuid
  -> set environment variable to partition UUID
part list mmc 0
  -> list the partitions on the specified device

"part uuid" can be useful when writing a bootcmd which searches all
known devices for something bootable, and then wants the kernel to
use the same partition as the root device, e.g.:

part uuid ${devtype} ${devnum}:${rootpart} uuid
setenv bootargs root=PARTUUID=${uuid} ...

Signed-off-by: Stephen Warren <swarren@nvidia.com>
12 years agodisk: part_msdos: parse and store partition UUID
Stephen Warren [Fri, 21 Sep 2012 09:51:00 +0000 (09:51 +0000)]
disk: part_msdos: parse and store partition UUID

The MSDOS/MBR partition table includes a 32-bit unique ID, often referred
to as the NT disk signature. When combined with a partition number within
the table, this can form a unique ID similar in concept to EFI/GPT's
partition UUID.

This patch generates UUIDs in the format 0002dd75-01, which matches the
format expected by the Linux kernel.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
12 years agodisk: part_efi: parse and store partition UUID
Stephen Warren [Fri, 21 Sep 2012 09:50:59 +0000 (09:50 +0000)]
disk: part_efi: parse and store partition UUID

Each EFI partition table entry contains a UUID. Extend U-Boot's struct
disk_partition to be able to store this information, and modify
get_partition_info_efi() to fill it in.

The implementation of uuid_string() was derived from the Linux kernel,
tag v3.6-rc4 file lib/vsprintf.c function uuid_string().

Signed-off-by: Stephen Warren <swarren@nvidia.com>
12 years agodisk: part_efi: range-check partition number
Stephen Warren [Fri, 21 Sep 2012 09:50:58 +0000 (09:50 +0000)]
disk: part_efi: range-check partition number

Enhance get_partition_info_efi() to range-check the partition number.
This prevents invalid partitions being accessed, and prevents access
beyond the end of the gpt_pte[] array.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
12 years agodisk: get_device_and_partition() "auto" partition and cleanup
Stephen Warren [Fri, 21 Sep 2012 09:50:57 +0000 (09:50 +0000)]
disk: get_device_and_partition() "auto" partition and cleanup

Rework get_device_and_partition() to:
a) Implement a new partition ID of "auto", which requests that U-Boot
   search for the first "bootable" partition, and fall back to the first
   valid partition if none is found. This way, users don't need to
   specify an explicit partition in their commands.
b) Make use of get_device().
c) Add parameter to indicate whether returning a whole device is
   acceptable, or whether a partition is mandatory.
d) Make error-checking of the user's device-/partition-specification
   more complete. In particular, if strtoul() doesn't convert all
   characters, it's an error rather than just ignored.

The resultant device/partition returned by the function will be as
follows, based on whether the disk has a partition table (ptable) or not,
and whether the calling command allows the whole device to be returned
or not.

(D and P are integers, P >= 1)

D
D:
  No ptable:
    !allow_whole_dev: error
    allow_whole_dev: device D
  ptable:
    device D partition 1
D:0
  !allow_whole_dev: error
  allow_whole_dev: device D
D:P
  No ptable: error
  ptable: device D partition P
D:auto
  No ptable:
    !allow_whole_dev: error
    allow_whole_dev: device D
  ptable:
    first partition in device D with bootable flag set.
    If none, first valid paratition in device D.

Note: In order to review this patch, it's probably easiest to simply
look at the file contents post-application, rather than reading the
patch itself.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
[swarren: Rob implemented scanning for bootable partitions. I fixed a
couple of issues there, switched the syntax to ":auto", added the
error-checking rework, and ":0" syntax for the whole device]
Signed-off-by: Stephen Warren <swarren@nvidia.com>
12 years agodisk: introduce get_device()
Stephen Warren [Fri, 21 Sep 2012 09:50:56 +0000 (09:50 +0000)]
disk: introduce get_device()

This patch introduces function get_device(). This looks up a
block_dev_desc_t from an interface name (e.g. mmc) and device number
(e.g. 0). This function is essentially the non-partition-specific
prefix of get_device_and_partition().

Signed-off-by: Stephen Warren <swarren@nvidia.com>
12 years agocmd_reiser: use common get_device_and_partition function
Rob Herring [Thu, 23 Aug 2012 11:31:50 +0000 (11:31 +0000)]
cmd_reiser: use common get_device_and_partition function

Convert reiserload and reiserls to use common device and partition parsing
function. With the common function "dev:part" can come from the
environment and a '-' can be used in that case.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
12 years agocmd_zfs: use common get_device_and_partition function
Rob Herring [Thu, 23 Aug 2012 11:31:49 +0000 (11:31 +0000)]
cmd_zfs: use common get_device_and_partition function

Convert zfsload and zfsls to use common device and partition parsing
function. With the common function "dev:part" can come from the
environment and a '-' can be used in that case.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
12 years agocmd_disk: use common get_device_and_partition function
Rob Herring [Thu, 23 Aug 2012 11:31:48 +0000 (11:31 +0000)]
cmd_disk: use common get_device_and_partition function

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
12 years agocmd_fat: use common get_device_and_partition function
Rob Herring [Thu, 23 Aug 2012 11:31:47 +0000 (11:31 +0000)]
cmd_fat: use common get_device_and_partition function

Convert fatload, fatls, and fatinfo to use common device and partition
parsing function. With the common function "dev:part" can come from the
environment and a '-' can be used in that case.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
12 years agocmd_extX: use common get_device_and_partition function
Rob Herring [Thu, 23 Aug 2012 11:31:46 +0000 (11:31 +0000)]
cmd_extX: use common get_device_and_partition function

Convert ext2/4 load, ls, and write functions to use common device and
partition parsing function. With the common function "dev:part" can come
from the environment and a '-' can be used in that case.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
12 years agoext4: remove init_fs/deinit_fs
Rob Herring [Thu, 23 Aug 2012 11:31:45 +0000 (11:31 +0000)]
ext4: remove init_fs/deinit_fs

There's no real need to expose this and it can be removed by using a static
allocation.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
12 years agodisk/part: introduce get_device_and_partition
Rob Herring [Fri, 21 Sep 2012 04:08:17 +0000 (04:08 +0000)]
disk/part: introduce get_device_and_partition

All block device related commands (scsiboot, fatload, ext2ls, etc.) have
simliar duplicated device and partition parsing and selection code. This
adds a common function to replace various implementations.

The new function has an enhancement over current versions. If no device
or partition is specified on the command line, the bootdevice env variable
will be used (scsiboot does this).

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
12 years agodisk/part: check bootable flag for DOS partitions
Rob Herring [Thu, 23 Aug 2012 11:31:43 +0000 (11:31 +0000)]
disk/part: check bootable flag for DOS partitions

Determine which partitions are bootable/active. In the partition listing,
print "Boot" for partitions with the bootable/active flag set.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
12 years agocombine block device load commands into common function
Rob Herring [Fri, 21 Sep 2012 04:02:30 +0000 (04:02 +0000)]
combine block device load commands into common function

All the raw block load commands duplicate the same code. Starting with
the ide version as it has progress updates convert ide, usb, and scsi boot
commands to all use a common version.

Signed-off-by: Rob Herring <rob.herring@calxeda.com>
12 years agodisk: make get_partition_info() always available to disk.c
Stephen Warren [Fri, 21 Sep 2012 12:46:54 +0000 (12:46 +0000)]
disk: make get_partition_info() always available to disk.c

Now that get_device_and_partition() always calls get_partition_info()
when disk.c is compiled, we must always compile the function, rather
than ifdef it away.

The implementation must be conditional based on CONFIG_CMD_* etc., since
that's what e.g. part_dos.c uses to ifdef out get_partition_info_dos();
CONFIG_DOS_PARTITION can be enabled even without those commands being
enabled.

Technically, this change is required before Rob's "disk/part: introduce
get_device_and_partition" patch. However, at least when the compiler
optimizer is turned on, it isn't required before then in practice,
since get_device_and_partition() calls get_dev(), which is stubbed out
in disk.c under exactly the same conditions that get_partition_info()
is not compiled, and hence the compiler never generates code for the
call to the missing function. However, in my later patch "disk:
get_device_and_partition() "auto" partition and cleanup", the optimizer
doesn't succeed at this, and may attempt to reference the undefined
function.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
12 years agoMAKEALL: fix per arch board lists
Allen Martin [Wed, 29 Aug 2012 11:08:59 +0000 (11:08 +0000)]
MAKEALL: fix per arch board lists

The LIST_arm rule included the Atmel boards twice (by virtue of
including both LIST_at91 and LIST_ARM9) and was missing all the
arm720t, arm946es, and arm1176 boards.  Change this list to use
boards_by_arch() which is less error prone.  After this change
"./MAKEALL arm" and "./MAKEALL -a arm" build the same boards.

Also fix up some missing and duplicate boards to arm, mips, and m68k.

Signed-off-by: Allen Martin <amartin@nvidia.com>
Acked-by: Tom Rini <trini@ti.com>
12 years agoARM: arm1176: Define arch_cpu_init() at the SoC level
Stephen Warren [Sat, 1 Sep 2012 16:27:56 +0000 (16:27 +0000)]
ARM: arm1176: Define arch_cpu_init() at the SoC level

Commit 86c6326 "ARM: arm1176: enable instruction cache in
arch_cpu_init()" defined arch_cpu_init() in a file that is shared across
all arm1176 SoCs. tnetv107x already implemented this function, which
caused linking to break. Move the new conflicting arch_cpu_init() into
arm1176/bcm2835/init.c so that it doesn't conflict; grep indicates this
function is usually defined at the SoC-level, not the CPU-level, at least
for ARM.

Signed-off-by: Stephen Warren <swarren@wwwdotorg.org>
Acked-by: Marek Vasut <marex@denx.de>
12 years agoMerge branch 'master' of git://git.denx.de/u-boot-mpc85xx
Tom Rini [Tue, 25 Sep 2012 19:23:55 +0000 (12:23 -0700)]
Merge branch 'master' of git://git.denx.de/u-boot-mpc85xx

12 years agocommon/lcd: fix build breakage for at91sam9x5ek and trats boards
Anatolij Gustschin [Sat, 22 Sep 2012 06:55:53 +0000 (06:55 +0000)]
common/lcd: fix build breakage for at91sam9x5ek and trats boards

Commit 203c37b8c5556aad1901ce4954792afd718c7d42
(common lcd: simplify core functions)

and commit bfdcc65e1163b4891643c2a670570c478b9af2a4
(common lcd: simplify lcd_display_bitmap)

caused build breakage for at91sam9x5ek board configurations
and for trats board. Fix these build errors.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Acked-by: Nikita Kiryanov <nikita@compulab.co.il>
12 years agoPrepare v2012.10-rc1
Tom Rini [Sat, 22 Sep 2012 00:18:28 +0000 (17:18 -0700)]
Prepare v2012.10-rc1

Signed-off-by: Tom Rini <trini@ti.com>
12 years agoMerge branch 'agust@denx.de' of git://git.denx.de/u-boot-staging
Tom Rini [Fri, 21 Sep 2012 23:22:18 +0000 (16:22 -0700)]
Merge branch 'agust@denx.de' of git://git.denx.de/u-boot-staging

12 years agopci: fix some warnings related to assumptions about
Kumar Gala [Wed, 19 Sep 2012 04:47:36 +0000 (04:47 +0000)]
pci: fix some warnings related to assumptions about

The following commit introduced some warnings associated with using
pci_addr_t instead of a proper 32-bit data type.

commit af778c6d9e2b945ee03cbc53bb976238a3374f33
Author: Andrew Sharp <andywyse6@gmail.com>
Date:   Wed Aug 1 12:27:16 2012 +0000

    pci: fix errant data types and corresponding access functions

On some platforms pci_addr_t is defined as a 64-bit data type so its not
proper to use with pci_{read,write}_config_dword.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
12 years agoMerge branch 'master' of git://git.denx.de/u-boot-arm
Tom Rini [Fri, 21 Sep 2012 21:53:13 +0000 (14:53 -0700)]
Merge branch 'master' of git://git.denx.de/u-boot-arm

12 years agovideo/powerpc: don't touch DIU registers that we don't need
Timur Tabi [Mon, 17 Sep 2012 11:12:42 +0000 (11:12 +0000)]
video/powerpc: don't touch DIU registers that we don't need

Several DIU registers were being initialized either unnecessarily or to
wrong values.

1) All interrupts were enabled even though there's no interrupt handler.
   Interrupts were left enabled when booting Linux.

2) Don't configure a dummy area descriptor, since we don't support ADs
   in U-Boot.

3) Don't configure any write-back buffer registers, since we don't use
   that mode.

4) The default values for the THRESHOLDS, SYN_POL, and PLUT registers
   should be used, so don't touch those registers either.

Signed-off-by: Timur Tabi <timur@freescale.com>
12 years agocommon/lcd: add protection from null bmp pointer
Nikita Kiryanov [Sun, 19 Aug 2012 19:32:30 +0000 (19:32 +0000)]
common/lcd: add protection from null bmp pointer

If the bmp pointer is null then U-Boot will get stuck when trying
to load the image.
What's worse, it will get stuck before the U-Boot shell becomes
available to the user, thus making it difficult to correct the
situation.

To protect from the above scenario, check if the pointer is valid.

Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il>
12 years agofdt: Add header guard to fdtdec.h
Simon Glass [Thu, 12 Jul 2012 05:25:02 +0000 (05:25 +0000)]
fdt: Add header guard to fdtdec.h

This makes it easier to include this header from other headers.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Mike Frysinger <vapier@gentoo.org>
12 years agofdt: Tidy debugging, add to fdtdec_get_int/addr()
Simon Glass [Thu, 12 Jul 2012 05:25:01 +0000 (05:25 +0000)]
fdt: Tidy debugging, add to fdtdec_get_int/addr()

The new debugging shows the value of integers and addresses read
from the device tree and tidy up GPIO output.

Signed-off-by: Simon Glass <sjg@chromium.org>
12 years agoAdd gpio_request() to asm-generic header
Simon Glass [Wed, 13 Jun 2012 06:19:37 +0000 (06:19 +0000)]
Add gpio_request() to asm-generic header

This function should also be part of the GPIO API, so add it.

Signed-off-by: Simon Glass <sjg@chromium.org>
12 years agoMerge branch 'master' of git://git.denx.de/u-boot-usb
Tom Rini [Fri, 21 Sep 2012 16:29:38 +0000 (09:29 -0700)]
Merge branch 'master' of git://git.denx.de/u-boot-usb

12 years agoRevert "memsize: Fix for bug in memory sizing code"
Tom Rini [Fri, 21 Sep 2012 15:14:05 +0000 (08:14 -0700)]
Revert "memsize: Fix for bug in memory sizing code"

After further investigation this change is not correct and results in
get_ram_size returning incorrectly large values.  Reported first by
Gerlando Falauto.

This reverts commit b8496cced856ff411f1eb2e4eff20f5abe7080b0.

Signed-off-by: Tom Rini <trini@ti.com>
12 years agoMerge remote-tracking branch 'u-boot-imx/master'
Albert ARIBAUD [Thu, 20 Sep 2012 22:26:19 +0000 (00:26 +0200)]
Merge remote-tracking branch 'u-boot-imx/master'

12 years agousb: do explicit unaligned accesses
Lucas Stach [Thu, 6 Sep 2012 06:00:13 +0000 (08:00 +0200)]
usb: do explicit unaligned accesses

usb_hub_descriptor has to be packed as it's used for
communication with the device. Member wHubCharacteristics
violates the natural alignment rules.

Use explicit unaligned access functions for this member.
Fixes ARMv7 traping while using USB.

v2: fix typo found by Thomas Langer

v3: rebased on top of u-boot-usb/master

Signed-off-by: Lucas Stach <dev@lynxeye.de>
12 years agodfu:usb:fix: Read the "filesize" environment variable only when file read
Łukasz Majewski [Thu, 23 Aug 2012 23:33:56 +0000 (23:33 +0000)]
dfu:usb:fix: Read the "filesize" environment variable only when file read

The "filesize" environment variable shall be read only when relevant
file is read.

Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Reviewed-by: Marek Vasut <marex@denx.de>
12 years agodfu:usb: Support for ext4
Łukasz Majewski [Thu, 23 Aug 2012 23:33:55 +0000 (23:33 +0000)]
dfu:usb: Support for ext4

Support for ext4 file system handling at DFU.

Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Reviewed-by: Marek Vasut <marex@denx.de>
12 years agoMerge branch 'ext4'
Tom Rini [Thu, 20 Sep 2012 18:27:35 +0000 (11:27 -0700)]
Merge branch 'ext4'

Update Makefile change for LIBS -> LIBS-y change.

Conflicts:
Makefile

Signed-off-by: Tom Rini <trini@ti.com>
12 years agoext4: cache-align buffers so the invalidation works
Stephen Warren [Tue, 18 Sep 2012 08:05:28 +0000 (08:05 +0000)]
ext4: cache-align buffers so the invalidation works

DMA buffer cache invalidation requires that buffers have cache-aligned
buffer locations and sizes. Use memalign() and ALLOC_CACHE_ALIGN_BUFFER()
to ensure this.

On Tegra at least, without this fix, the following fail commands fail in
u-boot-master/ext4, but succeeded at the branch's branch point in
u-boot/master. With this fix, the commands work again:

ext2ls mmc 0:1 /
ext2load mmc 0:1 /boot/zImage

Cc: Uma Shankar <uma.shankar@samsung.com>
Cc: Manjunatha C Achar <a.manjunatha@samsung.com>
Cc: Iqbal Shareef <iqbal.ams@samsung.com>
Cc: Hakgoo Lee <goodguy.lee@samsung.com>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Tom Rini <trini@ti.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
12 years agoFlex bus definition update for Coldfire 5253.
Jason Jin [Thu, 20 Sep 2012 06:17:46 +0000 (14:17 +0800)]
Flex bus definition update for Coldfire 5253.

originally work by Jate Sujjavanich <jsujjavanich@syntech-fuelmaster.com>
----
The defines in arch/m68k/include/coldfire/flexbus.h are not compatible with
the 5235 processor. The registers in struct fbcs are different sizes from
those in the 5235. Also, the defines are a little different.

This is what I have so far. Comments?
----

Reformat the patch manually by Jason Jin

Signed-off-by: Jate Sujjavanich <jsujjavanich@syntech-fuelmaster.com>
Signed-off-by: Jason Jin <Jason.jin@freescale.com>
12 years agoColdFire: Queued SPI driver
Richard Retanubun [Thu, 24 Mar 2011 08:58:11 +0000 (08:58 +0000)]
ColdFire: Queued SPI driver

This patch adds a driver for Freescale Colfire Queued SPI bus.
Coded to work with 8 bits per transfer to use with SPI flash.
CPOL, CPHA, and CS_ACTIVE_HIGH can be configured.

Tested with MCF5270 which have 4 chip selects.

Activate by #define CONFIG_CF_QSPI in board config.

Signed-off-by: Richard Retanubun <richardretanubun@ruggedcom.com>
12 years agoColdFire: Clean up checkpatch warnings for MCF54451 and MCF54455
Alison Wang [Mon, 26 Mar 2012 21:49:08 +0000 (21:49 +0000)]
ColdFire: Clean up checkpatch warnings for MCF54451 and MCF54455

Signed-off-by: Alison Wang <b18965@freescale.com>
12 years agoColdFire: Clean up checkpatch warnings for MCF547x and MCF548x
Alison Wang [Mon, 26 Mar 2012 21:49:07 +0000 (21:49 +0000)]
ColdFire: Clean up checkpatch warnings for MCF547x and MCF548x

Signed-off-by: Alison Wang <b18965@freescale.com>
12 years agoColdFire: Clean up checkpatch warnings for MCF523x
Alison Wang [Mon, 26 Mar 2012 21:49:06 +0000 (21:49 +0000)]
ColdFire: Clean up checkpatch warnings for MCF523x

Signed-off-by: Alison Wang <b18965@freescale.com>
12 years agoColdFire: Clean up checkpatch warnings for MCF532x/MCF537x/MCF5301x
Alison Wang [Mon, 26 Mar 2012 21:49:05 +0000 (21:49 +0000)]
ColdFire: Clean up checkpatch warnings for MCF532x/MCF537x/MCF5301x

Signed-off-by: Alison Wang <b18965@freescale.com>
12 years agoColdFire: Clean up checkpatch warnings for MCF52x2
Alison Wang [Mon, 26 Mar 2012 21:49:04 +0000 (21:49 +0000)]
ColdFire: Clean up checkpatch warnings for MCF52x2

Signed-off-by: Alison Wang <b18965@freescale.com>
12 years agoColdFire: Clean up checkpatch warnings for MCF5227x
Alison Wang [Mon, 26 Mar 2012 21:49:03 +0000 (21:49 +0000)]
ColdFire: Clean up checkpatch warnings for MCF5227x

Signed-off-by: Alison Wang <b18965@freescale.com>
12 years agoColdFire: Add clear and set bits macros for ColdFire platform
Alison Wang [Mon, 26 Mar 2012 21:49:02 +0000 (21:49 +0000)]
ColdFire: Add clear and set bits macros for ColdFire platform

Signed-off-by: Alison Wang <b18965@freescale.com>
12 years agoColdFire: Update the bitops for ColdFire platform
Alison Wang [Sun, 25 Mar 2012 19:18:49 +0000 (19:18 +0000)]
ColdFire: Update the bitops for ColdFire platform

This patch uses the general ffs definition to replace the
platform ffs definition.

This patch also fixes the build error by adding hweightN
definition for m5329evb and m5373evb.

Signed-off-by: Jason Jin <Jason.jin@freescale.com>
Signed-off-by: Alison Wang <b18965@freescale.com>
12 years agoColdFire: Rename NANDFLASH_SIZE into CONFIG_NANDFLASH_SIZE for MCF537x
Alison Wang [Sun, 25 Mar 2012 19:18:14 +0000 (19:18 +0000)]
ColdFire: Rename NANDFLASH_SIZE into CONFIG_NANDFLASH_SIZE for MCF537x

This patch fixes the build error for MCF537x. As the NANDFLASH_SIZE is
redefined in boards.cfg, it is needed to rename NANDFLASH_SIZE into
CONFIG_NANDFLASH_SIZE in include/configs/M5373EVB.h.

Signed-off-by: Alison Wang <b18965@freescale.com>
12 years agoMerge branch 'master' of git://git.denx.de/u-boot-mpc83xx
Tom Rini [Tue, 18 Sep 2012 21:56:31 +0000 (14:56 -0700)]
Merge branch 'master' of git://git.denx.de/u-boot-mpc83xx

12 years agompc8308rdb: add support for eSDHC MMC controller
Ira W. Snyder [Wed, 12 Sep 2012 21:17:35 +0000 (14:17 -0700)]
mpc8308rdb: add support for eSDHC MMC controller

Add support for the onboard eSDHC MMC controller. The hardware on the
MPC8308RDB has the following errata:

- ESDHC111: manual asynchronous CMD12 is broken
- DMA is broken (PIO works)

Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu>
[added include fsl_esdhc header to prevent implicit declarations of
fsl_esdhc_mmc_init() and fdt_fixup_esdhc()]

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
12 years agompc8308rdb: add support for FIT images
Ira W. Snyder [Wed, 12 Sep 2012 21:17:34 +0000 (14:17 -0700)]
mpc8308rdb: add support for FIT images

This is very useful on a modern system.

Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
12 years agompc8308rdb: add support for Spansion SPI flash on header J8
Ira W. Snyder [Wed, 12 Sep 2012 21:17:32 +0000 (14:17 -0700)]
mpc8308rdb: add support for Spansion SPI flash on header J8

The SPI pins are routed to header J8 for testing SPI functionality. A
Spansion flash has been wired up and tested on this header.

This patch breaks support for the second TSEC interface, since the GPIO
pin used as a chip select is pinmuxed with some of the TSEC pins.

Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
12 years agompc8xxx_spi: fix SPI support on MPC8308RDB
Ira W. Snyder [Wed, 12 Sep 2012 21:17:31 +0000 (14:17 -0700)]
mpc8xxx_spi: fix SPI support on MPC8308RDB

The MPC8308RDB Reference Manual states that no bits in the SPMODE
register are allowed to change while the enable (EN) bit is set.

This driver changes the character length bits (LEN) while the enable
(EN) bit is set. Clearing the EN bit while changing the LEN bits makes
the driver work correctly on MPC8308RDB.

Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
12 years agoFAT: Fix file contents listed as directory
Benoît Thébaudeau [Fri, 20 Jul 2012 03:20:29 +0000 (03:20 +0000)]
FAT: Fix file contents listed as directory

With:
fatls mmc 0 /dir/file
dir: regular directory
file: regular file

The previous code read the contents of file as if it were directory entries to
list. This patch refuses to list file contents as if it were a folder.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Cc: Wolfgang Denk <wd@denx.de>
12 years agoenv: delete selected vars not present in imported env
Gerlando Falauto [Sun, 26 Aug 2012 21:53:00 +0000 (21:53 +0000)]
env: delete selected vars not present in imported env

When variables explicitly specified on the command line are not present
in the imported env, delete them from the running env.
If the variable is also missing from the running env, issue a warning.

Signed-off-by: Gerlando Falauto <gerlando.falauto@keymile.com>
Reviewed-by: Marek Vasut <marex@denx.de>
12 years agoenv: make "env default" selective, check and apply
Gerlando Falauto [Fri, 24 Aug 2012 00:11:41 +0000 (00:11 +0000)]
env: make "env default" selective, check and apply

Change the syntax (user API) for "env default":
  -f: override write-once variables
  var... : accept individual variable(s)
  -a: all (resetting the whole env is NOT the default behavior)

Enable variable checking and make changes effective by
enabling do_apply argument to himport_r().

Signed-off-by: Gerlando Falauto <gerlando.falauto@keymile.com>
12 years agoenv: check and apply changes on delete/destroy
Gerlando Falauto [Fri, 24 Aug 2012 00:11:40 +0000 (00:11 +0000)]
env: check and apply changes on delete/destroy

Signed-off-by: Gerlando Falauto <gerlando.falauto@keymile.com>
Reviewed-by: Marek Vasut <marex@denx.de>
12 years agoenv: add check/apply logic to himport_r()
Gerlando Falauto [Fri, 24 Aug 2012 00:11:39 +0000 (00:11 +0000)]
env: add check/apply logic to himport_r()

Change hashtable so that a callback function will decide whether a
variable can be overwritten, and possibly apply the changes.

So add a new field to struct hsearch_data:

 o "apply" callback function to check whether a variable can be
    overwritten, and possibly immediately apply the changes;
    when NULL, no check is performed.

And a new argument to himport_r():
 o "do_apply": whether to call the apply callback function

NOTE: This patch does not change the current behavior.

Signed-off-by: Gerlando Falauto <gerlando.falauto@keymile.com>
Reviewed-by: Marek Vasut <marex@denx.de>
12 years agoenv: make himport_r() selective on variables
Gerlando Falauto [Fri, 24 Aug 2012 00:11:38 +0000 (00:11 +0000)]
env: make himport_r() selective on variables

Add 2 new arguments to himport_r():

 o "nvars", "vars": number and list of variables to take into account
   (0 means ALL)

NOTE: This patch does not change the current behaviour.

Signed-off-by: Gerlando Falauto <gerlando.falauto@keymile.com>
Reviewed-by: Marek Vasut <marex@denx.de>
12 years agoenv: unify logic to check and apply changes
Gerlando Falauto [Fri, 24 Aug 2012 00:11:37 +0000 (00:11 +0000)]
env: unify logic to check and apply changes

The logic of checking special parameters (e.g. baudrate, stdin, stdout,
for a valid value and/or whether can be overwritten) and applying the
new value to the running system is now all within a single function
env_check_apply() which can be called whenever changes are made
to the environment, no matter if by set, default or import.

With this patch env_check_apply() is only called by "env set",
retaining previous behavior.

Signed-off-by: Gerlando Falauto <gerlando.falauto@keymile.com>
Reviewed-by: Marek Vasut <marex@denx.de>
12 years agoenv: cosmetic: drop assignment i = iomux_doenv()
Gerlando Falauto [Fri, 24 Aug 2012 00:11:36 +0000 (00:11 +0000)]
env: cosmetic: drop assignment i = iomux_doenv()

iomux_doenv() can only return 0 or 1.
So there is no need to save its return value in variable i, as checking
its truth value within an if statement is enough.

Signed-off-by: Gerlando Falauto <gerlando.falauto@keymile.com>
Reviewed-by: Marek Vasut <marex@denx.de>
12 years agofw_env: Add env vars describing U-Boot target board
Benoît Thébaudeau [Fri, 10 Aug 2012 07:45:15 +0000 (07:45 +0000)]
fw_env: Add env vars describing U-Boot target board

Commit 5e724ca did the same thing for env_common and env_embedded, but forgot
fw_env.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Cc: Wolfgang Denk <wd@denx.de>
12 years agoenv_common: Add missing ethprime
Benoît Thébaudeau [Fri, 10 Aug 2012 07:45:31 +0000 (07:45 +0000)]
env_common: Add missing ethprime

The ethprime env var was missing from env_common.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Cc: Wolfgang Denk <wd@denx.de>
12 years agoenv import/export: Remove from help if disabled
Benoît Thébaudeau [Fri, 10 Aug 2012 07:45:44 +0000 (07:45 +0000)]
env import/export: Remove from help if disabled

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Cc: Wolfgang Denk <wd@denx.de>
Acked-by: Mike Frysinger <vapier@gentoo.org>
12 years agomemsize: Fix for bug in memory sizing code
Iwo Mergler [Sun, 9 Sep 2012 20:16:58 +0000 (20:16 +0000)]
memsize: Fix for bug in memory sizing code

The original memory sizing code in get_ram_size clobbers the word
at the base address, but forgets to restore it.

Signed-off-by: Iwo Mergler <Iwo.Mergler@netcommwireless.com>
12 years agoenv_nand: fix incorrect size parameter to ALLOC_CACHE_ALIGN_BUFFER
Stephen Warren [Fri, 7 Sep 2012 09:15:33 +0000 (09:15 +0000)]
env_nand: fix incorrect size parameter to ALLOC_CACHE_ALIGN_BUFFER

The third parameter to ALLOC_CACHE_ALIGN_BUFFER is not size (as named),
but rather count (number of elements of the type to allocate). The
current code ends up allocating one copy of env_t for each byte in its
size, which quite possibly ends up overflowing RAM.

This fixes a bug in commit 3801a15 "env_nand: align NAND buffers".

Reported-by: Prabhakar Lad <prabhakar.csengg@gmail.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Reported-by: Prabhakar Lad <prabhakar.lad@ti.com>
12 years agoARM: Remove apollon board
Marek Vasut [Wed, 5 Sep 2012 17:16:55 +0000 (17:16 +0000)]
ARM: Remove apollon board

This board is the only board that still sticks to OneNAND IPL.
Remove this board, since we have SPL around for a while and
OneNAND is well supported in the SPL framework. The board can
be revived if necessary.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Albert Aribaud <albert.u.boot@aribaud.net>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Tom Rini <trini@ti.com>
12 years agoIPL: Remove remains of OneNAND IPL
Marek Vasut [Wed, 5 Sep 2012 17:09:08 +0000 (17:09 +0000)]
IPL: Remove remains of OneNAND IPL

After removing the Apollon board, remove the OneNAND IPL too.
There are no users for it any more.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Albert Aribaud <albert.u.boot@aribaud.net>
Cc: Minkyu Kang <promsoft@gmail.com>
Cc: Tom Rini <trini@ti.com>
Acked-by: Minkyu Kang <mk7.kang@samsung.com>
12 years agospl: remove forced linking of commands into SPL
Tyler Olmstead [Wed, 8 Aug 2012 16:24:13 +0000 (16:24 +0000)]
spl: remove forced linking of commands into SPL

Remove linker command line options from the SPL makefile
that force the inclusion of unreferenced command code from
linked object files. As commands are not used in the SPL,
these options resulted in an unnecessary increase in the
image size, in addition to introducing the possibility of
tricky link errors in the case where the command code
contained symbols that were not resolved by linking in the
limited objects compiled in the SPL build.

Signed-off-by: Tyler Olmstead <tyler.j.olmstead@gmail.com>
Acked-by: Tom Rini <trini@ti.com>
12 years agodm: sparc: Fixup the compile warnings in sparc code
Marek Vasut [Fri, 27 Jul 2012 08:04:34 +0000 (08:04 +0000)]
dm: sparc: Fixup the compile warnings in sparc code

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Daniel Hellstrom <daniel@gaisler.com>
Cc: u-boot-dm@lists.denx.de
12 years agodm: sparc: common: Fixup cmd_bdinfo warnings
Marek Vasut [Fri, 27 Jul 2012 08:04:33 +0000 (08:04 +0000)]
dm: sparc: common: Fixup cmd_bdinfo warnings

cmd_bdinfo.c: In function ‘do_bdinfo’:
cmd_bdinfo.c:220:9: warning: format ‘%lx’ expects argument of type ‘long unsigned int’, but argument 2 has type ‘int’ [-Wformat]
cmd_bdinfo.c:222:9: warning: format ‘%lx’ expects argument of type ‘long unsigned int’, but argument 2 has type ‘int’ [-Wformat]
cmd_bdinfo.c:224:9: warning: format ‘%lx’ expects argument of type ‘long unsigned int’, but argument 2 has type ‘int’ [-Wformat]
cmd_bdinfo.c:226:9: warning: format ‘%lx’ expects argument of type ‘long unsigned int’, but argument 2 has type ‘int’ [-Wformat]
cmd_bdinfo.c:228:9: warning: format ‘%lx’ expects argument of type ‘long unsigned int’, but argument 2 has type ‘int’ [-Wformat]

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Daniel Hellstrom <daniel@gaisler.com>
Cc: u-boot-dm@lists.denx.de
12 years agodm: sparc: net: Fixup greth compile warnings
Marek Vasut [Fri, 27 Jul 2012 08:04:32 +0000 (08:04 +0000)]
dm: sparc: net: Fixup greth compile warnings

greth.c: In function ‘greth_recv’:
greth.c:507:3: warning: format ‘%lx’ expects argument of type ‘long unsigned int’, but argument 2 has type ‘unsigned int’ [-Wformat]
greth.c:507:3: warning: format ‘%lx’ expects argument of type ‘long unsigned int’, but argument 3 has type ‘unsigned int’ [-Wformat]
greth.c:541:6: warning: pointer targets in assignment differ in signedness [-Wpointer-sign]
greth.c: In function ‘greth_initialize’:
greth.c:623:2: warning: format ‘%lx’ expects argument of type ‘long unsigned int’, but argument 2 has type ‘struct greth_regs *’ [-Wformat]
greth.c:655:3: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 2 has type ‘struct greth_regs *’ [-Wformat]
greth.c:684:2: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 2 has type ‘struct greth_regs *’ [-Wformat]

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Joe Hershberger <joe.hershberger@gmail.com>
Cc: Daniel Hellstrom <daniel@gaisler.com>
Cc: u-boot-dm@lists.denx.de
12 years agomxc nand: Fix warning on !MXC_NFC_V2_1
Tom Rini [Tue, 18 Sep 2012 16:24:22 +0000 (09:24 -0700)]
mxc nand: Fix warning on !MXC_NFC_V2_1

In board_nand_init() we only need the 'tmp' variable if MXC_NFC_V2_1 is
defined.

Signed-off-by: Tom Rini <trini@ti.com>
12 years agoMerge branch 'master' of git://git.denx.de/u-boot-nand-flash
Tom Rini [Tue, 18 Sep 2012 14:55:07 +0000 (07:55 -0700)]
Merge branch 'master' of git://git.denx.de/u-boot-nand-flash

12 years agomxc nand: Homogenize IP revisions with Linux
Benoît Thébaudeau [Mon, 13 Aug 2012 20:50:53 +0000 (22:50 +0200)]
mxc nand: Homogenize IP revisions with Linux

Use the same IP revisions as in Linux in order to make the comparison more
clear.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Cc: Scott Wood <scottwood@freescale.com>
Cc: Stefano Babic <sbabic@denx.de>
Signed-off-by: Scott Wood <scottwood@freescale.com>
12 years agomxc nand: Let driver detect IP revision
Benoît Thébaudeau [Mon, 13 Aug 2012 20:50:42 +0000 (22:50 +0200)]
mxc nand: Let driver detect IP revision

There is no reason to have board configs to select the NFC IP revision. Just let
the driver detect it. BTW, remove broken NFC IP revision configs from board
config files.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Cc: Scott Wood <scottwood@freescale.com>
Cc: Stefano Babic <sbabic@denx.de>
Signed-off-by: Scott Wood <scottwood@freescale.com>
12 years agomtd mxc nand: Merge init functions
Benoît Thébaudeau [Mon, 13 Aug 2012 20:50:30 +0000 (22:50 +0200)]
mtd mxc nand: Merge init functions

Merge mxc_setup_config1() into board_nand_init() in order to ease the addition
of i.MX5 support in the following patches.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Cc: Scott Wood <scottwood@freescale.com>
Cc: Stefano Babic <sbabic@denx.de>
Signed-off-by: Scott Wood <scottwood@freescale.com>
12 years agomtd mxc nand: Fix ECC state after read_page_raw_syndrome()
Benoît Thébaudeau [Mon, 13 Aug 2012 20:50:19 +0000 (22:50 +0200)]
mtd mxc nand: Fix ECC state after read_page_raw_syndrome()

mxc_nand_read_page_raw_syndrome() should reenable ECC upon exit. This fixes ECC
errors left uncorrected after a call to this function.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Cc: Scott Wood <scottwood@freescale.com>
Cc: Stefano Babic <sbabic@denx.de>
Signed-off-by: Scott Wood <scottwood@freescale.com>
12 years agomtd mxc nand: Use _mxc_nand_enable_hwecc()
Benoît Thébaudeau [Mon, 13 Aug 2012 20:50:07 +0000 (22:50 +0200)]
mtd mxc nand: Use _mxc_nand_enable_hwecc()

Use _mxc_nand_enable_hwecc() instead of duplicating its code.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Cc: Scott Wood <scottwood@freescale.com>
Cc: Stefano Babic <sbabic@denx.de>
Signed-off-by: Scott Wood <scottwood@freescale.com>
12 years agospl mxc nand: Fix broken boot for correctable ECC errors
Benoît Thébaudeau [Mon, 13 Aug 2012 20:49:53 +0000 (22:49 +0200)]
spl mxc nand: Fix broken boot for correctable ECC errors

Do not stop boot as soon as an ECC error is detected. Only stop boot for
uncorrectable ECC errors.

This fixes boards no longer booting after some time because a NAND Flash bit has
flipped.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Cc: Scott Wood <scottwood@freescale.com>
Cc: Stefano Babic <sbabic@denx.de>
Signed-off-by: Scott Wood <scottwood@freescale.com>
12 years agomxc nand: Access all ecc_status_result fields
Benoît Thébaudeau [Mon, 13 Aug 2012 20:49:42 +0000 (22:49 +0200)]
mxc nand: Access all ecc_status_result fields

On the NFC IP 1.1, the 32-bit ecc_status_result value comes from 2
consecutive 16-bit registers. This patch reads all the fields of this value,
which makes a difference for 4-kiB NF pages.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Cc: Scott Wood <scottwood@freescale.com>
Cc: Stefano Babic <sbabic@denx.de>
Signed-off-by: Scott Wood <scottwood@freescale.com>
12 years agospl mxc nand: Set symmetric mode
Benoît Thébaudeau [Mon, 13 Aug 2012 20:49:31 +0000 (22:49 +0200)]
spl mxc nand: Set symmetric mode

Set the spl mxc nand driver for IP 1.1 in symmetric mode, like the mtd driver.
In this way, for both drivers, one input clock period of the NFC IP will produce
one R/W cycle.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Cc: Scott Wood <scottwood@freescale.com>
Cc: Stefano Babic <sbabic@denx.de>
Signed-off-by: Scott Wood <scottwood@freescale.com>
12 years agospl mxc nand: Remove duplicated code
Benoît Thébaudeau [Mon, 13 Aug 2012 20:49:15 +0000 (22:49 +0200)]
spl mxc nand: Remove duplicated code

The ECC_EN and INT_MSK bits of CONFIG1 are not volatile, so it is sufficient to
set them once in nfc_nand_init().

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Cc: Scott Wood <scottwood@freescale.com>
Cc: Stefano Babic <sbabic@denx.de>
Signed-off-by: Scott Wood <scottwood@freescale.com>
12 years agospl mxc nand: Merge duplicated code
Benoît Thébaudeau [Mon, 13 Aug 2012 20:48:56 +0000 (22:48 +0200)]
spl mxc nand: Merge duplicated code

Merge duplicated code into functions, which is better for SPL size too.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Cc: Scott Wood <scottwood@freescale.com>
Cc: Stefano Babic <sbabic@denx.de>
Signed-off-by: Scott Wood <scottwood@freescale.com>
12 years agomxc nand: cosmectic: Light cleanup
Benoît Thébaudeau [Mon, 13 Aug 2012 20:48:26 +0000 (22:48 +0200)]
mxc nand: cosmectic: Light cleanup

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Cc: Scott Wood <scottwood@freescale.com>
Cc: Stefano Babic <sbabic@denx.de>
Signed-off-by: Scott Wood <scottwood@freescale.com>
12 years agomxc nand: Merge mtd and spl register definitions
Benoît Thébaudeau [Mon, 13 Aug 2012 20:48:12 +0000 (22:48 +0200)]
mxc nand: Merge mtd and spl register definitions

This patches fixes the TODO to use same register definitions in mtd mxc_nand and
nand_spl fsl nfc drivers.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Cc: Scott Wood <scottwood@freescale.com>
Cc: Stefano Babic <sbabic@denx.de>
Signed-off-by: Scott Wood <scottwood@freescale.com>
12 years agomtd: nand: allow NAND_NO_SUBPAGE_WRITE to be set from driver
Marek Vasut [Thu, 30 Aug 2012 13:39:38 +0000 (13:39 +0000)]
mtd: nand: allow NAND_NO_SUBPAGE_WRITE to be set from driver

This is based on Linux kernel -next:

commit 14f44abf1dafc20ba42ce8616a8fc8fbd1b3712b
Author: Brian Norris <computersforpeace@gmail.com>
Date:   Fri Jul 13 09:28:24 2012 -0700

    mtd: nand: allow NAND_NO_SUBPAGE_WRITE to be set from driver

    The NAND_CHIPOPTIONS_MSK has limited utility and is causing real bugs. It
    silently masks off at least one flag that might be set by the driver
    (NAND_NO_SUBPAGE_WRITE). This breaks the GPMI NAND driver and possibly
    others.

    Really, as long as driver writers exercise a small amount of care with
    NAND_* options, this mask is not necessary at all; it was only here to
    prevent certain options from accidentally being set by the driver. But the
    original thought turns out to be a bad idea occasionally. Thus, kill it.

    Note, this patch fixes some major gpmi-nand breakage.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Brian Norris <computersforpeace@gmail.com>
Cc: Eric Nelson <eric.nelson@boundarydevices.com>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Otavio Salvador <otavio@ossystems.com.br>
Cc: Scott Wood <scottwood@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
12 years agonand: Make NAND lock status compatible with Micron
Joe Hershberger [Wed, 22 Aug 2012 21:49:45 +0000 (16:49 -0500)]
nand: Make NAND lock status compatible with Micron

Micron NAND flash (e.g. MT29F4G08ABADAH4) BLOCK LOCK READ STATUS is not
the same as others.  Instead of bit 1 being lock, it is #lock_tight.
To make the driver support either format, ignore bit 1 and use only
bit 0 and bit 2.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
12 years agonand: consolidate duplicated constants
Joe Hershberger [Wed, 22 Aug 2012 21:49:44 +0000 (16:49 -0500)]
nand: consolidate duplicated constants

NAND_CMD_ constants for lock/unlock should be in the header

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
12 years agonand: Change ulong to loff_t and size_t
Joe Hershberger [Wed, 22 Aug 2012 21:49:43 +0000 (16:49 -0500)]
nand: Change ulong to loff_t and size_t

Missed in previous cleanup.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
12 years agonand: Add support for unlock.invert
Joe Hershberger [Wed, 22 Aug 2012 21:49:42 +0000 (16:49 -0500)]
nand: Add support for unlock.invert

NAND unlock command allows an invert bit to be set to unlock all but
the selected page range.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
[scottwood@freescale.com: updated docs and added comment about invert bit]
Signed-off-by: Scott Wood <scottwood@freescale.com>