Mark Kettenis [Sun, 14 Mar 2021 19:04:24 +0000 (20:04 +0100)]
efi_loader: fix memory type for memory reservation block
The (yet unreleased version of the) devicetree specification clearly
states that:
As with the /reserved-memory node, when booting via UEFI
entries in the Memory Reservation Block must also be listed
in the system memory map obtained via the GetMemoryMap() toi
protect against allocations by UEFI applications. The memory
reservation block entries should be listed with type
EfiReservedMemoryType.
This restores the behaviour that was changed by commit 4cbb2930bd8c
("efi_loader: consider no-map property of reserved memory").
Fixes: 4cbb2930bd8c ("efi_loader: consider no-map property of reserved memory") Signed-off-by: Mark Kettenis <kettenis@openbsd.org> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
efi_loader: disable GRUB_ARM32_WORKAROUND on ARCH_SUNXI
GRUB_ARM32_WORKAROUND can be disabled on ARCH_SUNXI as the Allwinner SoCs
only have a level 2 cache controlled via CP15 and not an architecturally
defined cache. Having the cache available speeds up booting Linux.
On ARCH_BCM283X it is already disabled via rpi_2_defconfig. But let's move
this setting to Kconfig.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Weijie Gao [Tue, 9 Mar 2021 07:52:31 +0000 (15:52 +0800)]
tools: mtk_image: add an option to set device header offset
This patch adds an option which allows setting the device header offset.
This is useful if this tool is used to generate ATF BL2 image of mt7622 for
SD cards.
Weijie Gao [Fri, 5 Mar 2021 02:35:39 +0000 (10:35 +0800)]
serial: mtk: rewrite the setbrg function
Currently the setbrg logic of serial-mtk is messy, and should be rewritten.
Also an option is added to make it possible to use highspeed-3 mode for all
bauds.
The new logic is:
1. If baud clock > 12MHz
a) If baud <= 115200, highspeed-0 mode will be used (ns16550 compatible)
b) If baud <= 576000, highspeed-2 mode will be used
c) any bauds > 576000, highspeed-3 mode will be used
2. If baud clock <= 12MHz
Forced highspeed-3 mode
a) If baud <= 115200, calculates the divisor using DIV_ROUND_CLOSEST
b) any bauds > 115200, the same as 1. c)
Weijie Gao [Fri, 5 Mar 2021 02:27:46 +0000 (10:27 +0800)]
dts: mt7629: enable JTAG pins by default
The EPHY LEDs belongs to the built-in FE switch of MT7629, which is barely
used. These LED pins on reference boards are used as JTAG socket. So it's
a good idea to change the default state to JTAG, and this will make it
convenience for debugging.
Weijie Gao [Fri, 5 Mar 2021 02:22:26 +0000 (10:22 +0800)]
pinctrl: mediatek: do not probe gpio driver if not enabled
The mtk pinctrl driver is a combination driver with support for both
pinctrl and gpio. When this driver is used in SPL, gpio support may not be
enabled, and this will result in a compilation error.
To fix this, macros are added to make sure gpio related code will only be
compiled when gpio support is enabled.
Fabien Parent [Mon, 15 Feb 2021 18:07:44 +0000 (19:07 +0100)]
board: mediatek: rename pumpkin board into mt8516
More than one pumpkin board has been made with different MediaTek SoCs.
Rename the pumpkin board to follow the naming convention of all
other MediaTek boards and also to not be confusing when other pumpkin
boards will be added in follow-up commits.
Biju Das [Mon, 1 Mar 2021 17:08:49 +0000 (17:08 +0000)]
arm: rmobile: Add HopeRun HiHope RZ/G2H board support
The HiHope RZ/G2H board from HopeRun consists of main board
(HopeRun HiHope RZ/G2H main board) and sub board(HopeRun
HiHope RZ/G2H sub board). The HiHope RZ/G2H sub board sits
below the HiHope RZ/G2H main board.
This patch adds the required board support to boot HopeRun HiHope
RZ/G2H board.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Biju Das [Mon, 1 Mar 2021 17:08:48 +0000 (17:08 +0000)]
arm: rmobile: Add HopeRun HiHope RZ/G2N board support
The HiHope RZ/G2N board from HopeRun consists of main board
(HopeRun HiHope RZ/G2N main board) and sub board(HopeRun
HiHope RZ/G2N sub board). The HiHope RZ/G2N sub board sits
below the HiHope RZ/G2N main board.
This patch adds the required board support to boot HopeRun HiHope
RZ/G2N board.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Biju Das [Mon, 1 Mar 2021 17:08:47 +0000 (17:08 +0000)]
arm: rmobile: Add HopeRun HiHope RZ/G2M board support
The HiHope RZ/G2M board from HopeRun consists of main board
(HopeRun HiHope RZ/G2M main board) and sub board(HopeRun
HiHope RZ/G2M sub board). The HiHope RZ/G2M sub board sits
below the HiHope RZ/G2M main board.
This patch adds the required board support to boot HopeRun HiHope
RZ/G2M board.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Tom Rini [Mon, 15 Mar 2021 12:43:19 +0000 (08:43 -0400)]
Merge tag 'u-boot-stm32-20210312' of https://source.denx.de/u-boot/custodians/u-boot-stm
- Add WATCHDOG_RESET() in MTD framework and STM32 QSPI driver
- stm32mp1_trusted_defconfig rely on SCMI support
- Remove the nand MTD configuration for NOR boot in stm32mp1 board
- STM32programmer update
- Bsec: manage clock when present in device tree
- stm32mp15: move bootdelay configuration in defconfig
- Update for stm32 dsi and dw_mipi_dsi
- STM32 MCU's cleanup
- Fix compilation issue depending on SYS_DCACHE_OFF and SYS_ICACHE_OFF flags
- Update stm32mp1 doc
Adam Ford [Sat, 6 Mar 2021 02:48:50 +0000 (20:48 -0600)]
ARM: da850-evm: Fix boot issues from missing SPL_PAD_TO
In a previous attempt to unify config options and remove items
from the whitelist file, SPL items were moved into a section
enabled with CONFIG_SPL_BUILD. Unfortunately, SPL_PAD_TO
is referenced at the head Makefile and uses this define
to create padding of the output file. When it was moved
to CONFIG_SPL_BUILD, it caused boot errors with devices
that are not booting from NOR. Fix the boot issues by moving
SPL_PAD_TO out so it's always.
Fixes: 7bb33e4684aa ("ARM: da850-evm: Unify config options with Kconfig") Signed-off-by: Adam Ford <aford173@gmail.com>
The Secure Channel Protocol 03 command sends control requests
(enable/provision) to the TEE implementing the protocol between the
processor and the secure element.
Signed-off-by: Jorge Ramirez-Ortiz <jorge@foundries.io> Reviewed-by: Simon Glass <sjg@chromium.org>
Adds support for a working SCP03 emulation. Input parameters are
validated however the commands (enable, provision) executed by the TEE
are assumed to always succeed.
Signed-off-by: Jorge Ramirez-Ortiz <jorge@foundries.io> Reviewed-by: Simon Glass <sjg@chromium.org>
Enable and provision the SCP03 keys on a TEE controlled secured elemt
from the U-Boot shell.
Executing this command will generate and program new SCP03 encryption
keys on the secure element NVM.
Depending on the TEE implementation, the keys would then be stored in
some persistent storage or better derived from some platform secret
(so they can't be lost).
Signed-off-by: Jorge Ramirez-Ortiz <jorge@foundries.io> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Igor Opaniuk <igor.opaniuk@foundries.io>
common: SCP03 control (enable and provision of keys)
This Trusted Application allows enabling SCP03 as well as provisioning
the keys on TEE controlled secure element (ie, NXP SE050).
All the information flowing on buses (ie I2C) between the processor
and the secure element must be encrypted. Secure elements are
pre-provisioned with a set of keys known to the user so that the
secure channel protocol (encryption) can be enforced on the first
boot. This situation is however unsafe since the keys are publically
available.
For example, in the case of the NXP SE050, these keys would be
available in the OP-TEE source tree [2] and of course in the
documentation corresponding to the part.
To address that, users are required to rotate/provision those keys
(ie, generate new keys and write them in the secure element's
persistent memory).
For information on SCP03, check the Global Platform HomePage and
google for that term [1]
[1] globalplatform.org
[2] https://github.com/OP-TEE/optee_os/
check:
core/drivers/crypto/se050/adaptors/utils/scp_config.c
Signed-off-by: Jorge Ramirez-Ortiz <jorge@foundries.io> Reviewed-by: Simon Glass <sjg@chromium.org>
Simon Glass [Sun, 7 Feb 2021 21:27:05 +0000 (14:27 -0700)]
test: acpi: Fix warnings on 32-bit build
Some format strings use the wrong type. Fix them.
Example warnings:
In file included from test/dm/acpi.c:22:
test/dm/acpi.c: In function ‘dm_test_acpi_cmd_list’:
test/dm/acpi.c:362:21: warning: format ‘%lx’ expects argument of type
‘long unsigned int’, but argument 4 has type ‘unsigned int’ [-Wformat=]
ut_assert_nextline("RSDP %08lx %06lx (v02 U-BOOT)", addr,
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
sizeof(struct acpi_rsdp));
~~~~~~~~~~~~~~~~~~~~~~~~
include/test/ut.h:282:33: note: in definition of macro ‘ut_assert_nextline’
if (ut_check_console_line(uts, fmt, ##args)) { \
^~~
Simon Glass [Sun, 7 Feb 2021 21:27:04 +0000 (14:27 -0700)]
tpm: Correct warning on 32-bit build
Fix the warning:
drivers/tpm/tpm2_tis_sandbox.c: In function ‘sandbox_tpm2_xfer’:
drivers/tpm/tpm2_tis_sandbox.c:288:48: warning: format ‘%ld’ expects
argument of type ‘long int’, but argument 2 has type ‘size_t’
{aka ‘unsigned int’} [-Wformat=]
printf("TPM2: Unmatching length, received: %ld, expected: %d\n",
~~^
%d
send_size, length);
~~~~~~~~~
Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Simon Glass [Thu, 21 Jan 2021 03:10:54 +0000 (20:10 -0700)]
log: Add return-checking macros for 0 being success
The existing log_ret() and log_msg_ret() macros consider an error to be
less than zero. But some function may return a positive number to indicate
a different kind of failure. Add macros to check for that also.
Simon Glass [Thu, 21 Jan 2021 03:10:53 +0000 (20:10 -0700)]
log: Handle line continuation
When multiple log() calls are used which don't end in newline, the
log prefix is prepended multiple times in the same line. This makes the
output look strange.
Fix this by detecting when the previous log record did not end in newline.
In that case, setting a flag.
Drop the unused BUFFSIZE in the test while we are here.
As an example implementation, update log_console to check the flag and
produce the expected output.
Simon Glass [Thu, 21 Jan 2021 03:10:52 +0000 (20:10 -0700)]
log: Set up a flag byte for log records
At present only a single flag (force_debug) is used in log records. Before
adding more, convert this into a bitfield, so more can be added without
using more space.
To avoid expanding the log_record struct itself (which some drivers may
wish to store in memory) reduce the line-number field to 16 bits. This
provides for up to 64K lines which should be enough for anyone.
Simon Glass [Mon, 8 Mar 2021 00:35:16 +0000 (17:35 -0700)]
test: sandbox: Move sandbox test docs into doc/develop
At present some of the documentation about running sandbox tests is in the
sandbox docs. It makes more sense to put it in with the other testing
docs, with a link there from sandbox. Update the documentation
accordingly.
Also add a paragraph explaining why sandbox exists and the test philosophy
that it uses.
Simon Glass [Mon, 8 Mar 2021 00:35:15 +0000 (17:35 -0700)]
spl: test: Add a test for spl_load_simple_fit()
As an example of an SPL test, add a new test for loading a FIT within
SPL. This runs on sandbox_spl. For this to work, the text base is adjusted
so that there is plenty of space available.
While we are here, document struct spl_load_info properly, since this is
currently ambiguous.
This test only verifies the logic path. It does not actually check that
the image is loaded correctly. It is not possible for sandbox's SPL to
actually run u-boot.img since it currently includes u-boot.bin rather than
u-boot. Further work could expand the test in that direction.
Simon Glass [Mon, 8 Mar 2021 00:35:14 +0000 (17:35 -0700)]
spl: Convert spl_fit to work with sandbox
At present this casts addresses to pointers so cannot work with sandbox.
Update the code to use map_sysmem() instead.
As part of this change, the existing load_ptr is renamed to src_ptr since
it is not a pointer to load_addr. It is confusing to use a similar name
for something that is not actually related. For the alignment code,
ALIGN() is used instead of open-coded alignment. Add a comment to the line
that casts away a const.
Use a (new) load_ptr variable to access memory at address load_addr.
Simon Glass [Mon, 8 Mar 2021 00:35:13 +0000 (17:35 -0700)]
sandbox: Update os_find_u_boot() to find the .img file
At present this function can only locate the u-boot ELF file. For SPL it
is handy to be able to locate u-boot.img since this is what would normally
be loaded by SPL.
Add another argument to allow this to be selected.
While we are here, update the function to load SPL when running in TPL,
since that is the next stage.
Simon Glass [Mon, 8 Mar 2021 00:35:11 +0000 (17:35 -0700)]
test: Rename all linker lists to have a ut_ prefix
At present each test suite has its own portion of the linker_list section
of the image, but other lists are interspersed. This makes it hard to
enumerate all the available tests without knowing the suites that each one
is in.
Place all tests together in a single contiguous list by giving them
common prefix not used elsewhere in U-Boot. This makes it possible to find
the start and end of all tests.
Simon Glass [Mon, 8 Mar 2021 00:35:10 +0000 (17:35 -0700)]
test: Add a macros for finding tests in linker_lists
At present we use the linker list directly. This is not very friendly, so
add a helpful macro instead. This will also allow us to change the naming
later without updating this code.
Simon Glass [Mon, 8 Mar 2021 00:35:07 +0000 (17:35 -0700)]
test: Move the devicetree check into ut_run_list()
Add a check to ut_run_list() as to whether a list has driver model tests.
Move the logic for the test devicetree into that function, in an effort
to eventually remove all logic from dm_test_run().
Simon Glass [Mon, 8 Mar 2021 00:35:06 +0000 (17:35 -0700)]
test: Use return values in dm_test_run()
Update this function to use the return value of ut_run_list() to check for
success/failure, so that they are in sync. Also return a command success
code so that the caller gets what it expects.
Simon Glass [Mon, 8 Mar 2021 00:35:04 +0000 (17:35 -0700)]
test: Use a local variable for test state
At present we use a global test state for all driver-model tests. Make use
of a local struct like we do with the other tests.
To make this work, add functions to get and set this state. When a test
starts, the state is set (so it can be used in the test). When a test
finishes, the state is unset, so it cannot be used by mistake.
Simon Glass [Mon, 8 Mar 2021 00:35:03 +0000 (17:35 -0700)]
test: Add ut_run_test_live_flat() to run tests twice
Driver model tests are generally run twice, once with livetree enable and
again with it disabled. Add a function to handle this and call it from the
driver model test runner.
Make ut_run_test() private since it is not used outside test-main.c now.
Simon Glass [Mon, 8 Mar 2021 00:35:01 +0000 (17:35 -0700)]
test: Use ut_run_test() to run driver model tests
Instead of having a separate function for running driver model tests, use
the common one. Make the pre/post-run functions private since we don't
need these outside of test-main.c
Simon Glass [Mon, 8 Mar 2021 00:34:57 +0000 (17:34 -0700)]
test: Drop struct dm_test_state
Driver model is a core part of U-Boot. We don't really need to have a
separate test structure for the driver model tests and it makes it harder
to write a test if you have to think about which type of test it is.
Subsume the fields from struct dm_test_state into struct unit_test_state
and delete the former.
Simon Glass [Mon, 8 Mar 2021 00:34:56 +0000 (17:34 -0700)]
test: Handle driver model reinit in test_pre_run()
For driver model tests we want to reinit the data structures so that
everything is in a known state before the test runs. This avoids one test
changing something that breaks a subsequent tests.
Simon Glass [Mon, 8 Mar 2021 00:34:49 +0000 (17:34 -0700)]
test: Call test_pre/post_run() from driver model tests
Ultimately we want to get rid of the special driver model test init and
use test_pre_run() and test_post_run() for all tests. As a first step,
use those function to handle console recording.
For now we need a special case for setting uts->start, but that wil go
away once all init is in one place.
Simon Glass [Mon, 8 Mar 2021 00:34:47 +0000 (17:34 -0700)]
test: Add an overall test runner
Add a new test runner that will eventually be able to run any test. For
now, have it run the 'command' unit tests, so that the functionality in
cmd_ut_category() moves into it.
Simon Glass [Mon, 8 Mar 2021 00:34:44 +0000 (17:34 -0700)]
test: Correct setexpr test prefix
This prefix should be for setexpr, not mem. This means that trying to
select just these tests to run does not work. Fix it.
For some reason this provokes an assertion failure due to memory not
being freed. Move the env_set() in setexpr_test_str() to before the
malloc() heap size size is recorded and disable the rest in
setexpr_test_str_oper().
Simon Glass [Mon, 8 Mar 2021 00:34:42 +0000 (17:34 -0700)]
doc: Explain how to run tests without pytest
Add details about how to run a sandbox test directly, without using
pytest. This is more convenient for rapid development, since it is faster
and allows easier use of a debugger. Also mention sandbox_flattree as an
example of the different sandbox builds available.
Simon Glass [Mon, 8 Mar 2021 00:34:37 +0000 (17:34 -0700)]
dm: core: Fix allocation of empty of-platdata
With of-platdata we always have a dtv struct that holds the platform data
provided by the driver_info record. However, this struct can be empty if
there are no actual devicetree properties provided.
The upshot of empty platform data is that it will end up as a zero-size
member in the BSS section, which is fine. But if the driver specifies
plat_auto then it expects the correct amount of space to be allocated.
At present this does not happen, since device_bind() assumes that the
platform-data size will always be >0. As a result we end up not
allocating the space and just use the BSS region, overwriting whatever
other contents are present.
Fix this by removing the condition that platform data be non-empty, always
allocating space if requested.
This fixes a strange bug that has been lurking since of-platdata was
implemented. It has likely never been noticed since devices normally have
at least some devicetree properties, BSS is seldom used on SPL, the dtv
structs are normally at the end of bss and the overwriting only happens
if a driver changes its platform data.
It was discovered using sandbox_spl, which exercises more features than
a normal board might, and the critical global_data variable 'gd' happened
to be at the end of BSS.
Fixes: 9fa28190091 ("dm: core: Expand platdata for of-platdata devices") Signed-off-by: Simon Glass <sjg@chromium.org>
- Some more updates/sync's to A38x DDR3 code (Marek & Pali)
- marvell/ddr/AXP: Some type fixes found in the LTO work (Marek)
- Espressobin: Enable more options (Pali)
- pci-aardvark: Implement workaround for the readback value of
VEND_ID (Paili)
Patrice Chotard [Wed, 24 Feb 2021 12:53:27 +0000 (13:53 +0100)]
arm: stm32mp: Fix compilation issue when SYS_DCACHE_OFF and/or SYS_DCACHE_SYS are enabled
Fix following compilation issue when SYS_DCACHE_OFF and/or SYS_DCACHE_SYS
are enabled :
arch/arm/mach-stm32mp/cpu.c: In function ‘early_enable_caches’:
arch/arm/mach-stm32mp/cpu.c:223:10: error: ‘volatile struct arch_global_data’ has no member named ‘tlb_size’
223 | gd->arch.tlb_size = PGTABLE_SIZE;
| ^
arch/arm/mach-stm32mp/cpu.c:224:10: error: ‘volatile struct arch_global_data’ has no member named ‘tlb_addr’
224 | gd->arch.tlb_addr = (unsigned long)&early_tlb;
| ^
Patrice Chotard [Wed, 24 Feb 2021 12:38:20 +0000 (13:38 +0100)]
board: st: Remove board_early_init_f and board_late_init callbacks for stm32 boards
Remove board_early_init_f() and board_late_init() callbacks for stm32
boards as the corresponding flags (CONFIG_BOARD_LATE_INIT and
CONFIG_BOARD_EARLY_INIT_R) are now disabled.
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Patrice Chotard [Wed, 24 Feb 2021 12:38:19 +0000 (13:38 +0100)]
configs: stm32: Remove BOARD_EARLY_INIT_F and BOARD_LATE_INIT for stm32 boards
These flags was defined and callbacks linked to these flags are empty
and only returning 0.
Remove BOARD_EARLY_INIT_F and BOARD_LATE_INIT flags for these stm32 boards.
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com> Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
projects / u-boot.git / log