From: Ye Li Date: Mon, 4 May 2020 14:08:54 +0000 (+0800) Subject: mxs_nand: Add support for i.MX8M X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=ff99041b3b6dccc1649d0c8512303a5240fb8785;p=u-boot.git mxs_nand: Add support for i.MX8M Update the gpmi/apbh_dma/bch drivers and relevant registers for i.MX8M. Signed-off-by: Ye Li Signed-off-by: Peng Fan --- diff --git a/arch/arm/include/asm/mach-imx/dma.h b/arch/arm/include/asm/mach-imx/dma.h index ca70731b9e..cb73aaeeb5 100644 --- a/arch/arm/include/asm/mach-imx/dma.h +++ b/arch/arm/include/asm/mach-imx/dma.h @@ -53,7 +53,7 @@ enum { MXS_DMA_CHANNEL_AHB_APBH_RESERVED1, MXS_MAX_DMA_CHANNELS, }; -#elif defined(CONFIG_MX6) || defined(CONFIG_MX7) +#elif (defined(CONFIG_MX6) || defined(CONFIG_MX7) || defined(CONFIG_IMX8M)) enum { MXS_DMA_CHANNEL_AHB_APBH_GPMI0 = 0, MXS_DMA_CHANNEL_AHB_APBH_GPMI1, diff --git a/arch/arm/include/asm/mach-imx/regs-apbh.h b/arch/arm/include/asm/mach-imx/regs-apbh.h index d7baf13343..d68953efd2 100644 --- a/arch/arm/include/asm/mach-imx/regs-apbh.h +++ b/arch/arm/include/asm/mach-imx/regs-apbh.h @@ -95,7 +95,7 @@ struct mxs_apbh_regs { mxs_reg_32(hw_apbh_version) }; -#elif (defined(CONFIG_MX28) || defined(CONFIG_MX6) || defined(CONFIG_MX7)) +#elif (defined(CONFIG_MX28) || defined(CONFIG_MX6) || defined(CONFIG_MX7) || defined(CONFIG_IMX8M)) struct mxs_apbh_regs { mxs_reg_32(hw_apbh_ctrl0) mxs_reg_32(hw_apbh_ctrl1) @@ -274,7 +274,7 @@ struct mxs_apbh_regs { #define APBH_CTRL0_CLKGATE_CHANNEL_NAND7 0x0800 #define APBH_CTRL0_CLKGATE_CHANNEL_HSADC 0x1000 #define APBH_CTRL0_CLKGATE_CHANNEL_LCDIF 0x2000 -#elif (defined(CONFIG_MX6) || defined(CONFIG_MX7)) +#elif (defined(CONFIG_MX6) || defined(CONFIG_MX7) || defined(CONFIG_IMX8M)) #define APBH_CTRL0_CLKGATE_CHANNEL_OFFSET 0 #define APBH_CTRL0_CLKGATE_CHANNEL_NAND0 0x0001 #define APBH_CTRL0_CLKGATE_CHANNEL_NAND1 0x0002 @@ -390,7 +390,7 @@ struct mxs_apbh_regs { #define APBH_CHANNEL_CTRL_FREEZE_CHANNEL_LCDIF 0x2000 #endif -#if (defined(CONFIG_MX6) || defined(CONFIG_MX7)) +#if (defined(CONFIG_MX6) || defined(CONFIG_MX7) || defined(CONFIG_IMX8M)) #define APBH_CHANNEL_CTRL_RESET_CHANNEL_OFFSET 16 #endif diff --git a/arch/arm/include/asm/mach-imx/regs-bch.h b/arch/arm/include/asm/mach-imx/regs-bch.h index 3c1abb7221..4b99edbb3d 100644 --- a/arch/arm/include/asm/mach-imx/regs-bch.h +++ b/arch/arm/include/asm/mach-imx/regs-bch.h @@ -127,7 +127,7 @@ struct mxs_bch_regs { #define BCH_FLASHLAYOUT0_NBLOCKS_OFFSET 24 #define BCH_FLASHLAYOUT0_META_SIZE_MASK (0xff << 16) #define BCH_FLASHLAYOUT0_META_SIZE_OFFSET 16 -#if (defined(CONFIG_MX6) || defined(CONFIG_MX7)) +#if (defined(CONFIG_MX6) || defined(CONFIG_MX7) || defined(CONFIG_IMX8M)) #define BCH_FLASHLAYOUT0_ECC0_MASK (0x1f << 11) #define BCH_FLASHLAYOUT0_ECC0_OFFSET 11 #else @@ -158,7 +158,7 @@ struct mxs_bch_regs { #define BCH_FLASHLAYOUT1_PAGE_SIZE_MASK (0xffff << 16) #define BCH_FLASHLAYOUT1_PAGE_SIZE_OFFSET 16 -#if (defined(CONFIG_MX6) || defined(CONFIG_MX7)) +#if (defined(CONFIG_MX6) || defined(CONFIG_MX7) || defined(CONFIG_IMX8M)) #define BCH_FLASHLAYOUT1_ECCN_MASK (0x1f << 11) #define BCH_FLASHLAYOUT1_ECCN_OFFSET 11 #else diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig index 4f37ba7d35..655e79fbaf 100644 --- a/drivers/dma/Kconfig +++ b/drivers/dma/Kconfig @@ -44,7 +44,7 @@ config TI_EDMA3 config APBH_DMA bool "Support APBH DMA" - depends on MX23 || MX28 || MX6 || MX7 + depends on MX23 || MX28 || MX6 || MX7 || IMX8M help Enable APBH DMA driver. diff --git a/drivers/dma/apbh_dma.c b/drivers/dma/apbh_dma.c index 15133128be..8d17f8f01d 100644 --- a/drivers/dma/apbh_dma.c +++ b/drivers/dma/apbh_dma.c @@ -215,7 +215,7 @@ static int mxs_dma_reset(int channel) #if defined(CONFIG_MX23) uint32_t setreg = (uint32_t)(&apbh_regs->hw_apbh_ctrl0_set); uint32_t offset = APBH_CTRL0_RESET_CHANNEL_OFFSET; -#elif (defined(CONFIG_MX28) || defined(CONFIG_MX6) || defined(CONFIG_MX7)) +#elif (defined(CONFIG_MX28) || defined(CONFIG_MX6) || defined(CONFIG_MX7) || defined(CONFIG_IMX8M)) uint32_t setreg = (uint32_t)(&apbh_regs->hw_apbh_channel_ctrl_set); uint32_t offset = APBH_CHANNEL_CTRL_RESET_CHANNEL_OFFSET; #endif diff --git a/drivers/mtd/nand/raw/Kconfig b/drivers/mtd/nand/raw/Kconfig index 23201ca720..c46fec3d32 100644 --- a/drivers/mtd/nand/raw/Kconfig +++ b/drivers/mtd/nand/raw/Kconfig @@ -259,12 +259,12 @@ config NAND_MXC config NAND_MXS bool "MXS NAND support" - depends on MX23 || MX28 || MX6 || MX7 + depends on MX23 || MX28 || MX6 || MX7 || IMX8M select SYS_NAND_SELF_INIT imply CMD_NAND select APBH_DMA - select APBH_DMA_BURST if ARCH_MX6 || ARCH_MX7 - select APBH_DMA_BURST8 if ARCH_MX6 || ARCH_MX7 + select APBH_DMA_BURST if ARCH_MX6 || ARCH_MX7 || ARCH_IMX8M + select APBH_DMA_BURST8 if ARCH_MX6 || ARCH_MX7 || ARCH_IMX8M help This enables NAND driver for the NAND flash controller on the MXS processors. diff --git a/drivers/mtd/nand/raw/mxs_nand.c b/drivers/mtd/nand/raw/mxs_nand.c index 2ac06a5730..facedf92c5 100644 --- a/drivers/mtd/nand/raw/mxs_nand.c +++ b/drivers/mtd/nand/raw/mxs_nand.c @@ -31,7 +31,7 @@ #define MXS_NAND_DMA_DESCRIPTOR_COUNT 4 -#if (defined(CONFIG_MX6) || defined(CONFIG_MX7)) +#if (defined(CONFIG_MX6) || defined(CONFIG_MX7) || defined(CONFIG_IMX8M)) #define MXS_NAND_CHUNK_DATA_CHUNK_SIZE_SHIFT 2 #else #define MXS_NAND_CHUNK_DATA_CHUNK_SIZE_SHIFT 0 @@ -773,7 +773,7 @@ static int mxs_nand_ecc_read_page(struct mtd_info *mtd, struct nand_chip *nand, if (status[i] == 0xff) { if (is_mx6dqp() || is_mx7() || - is_mx6ul()) + is_mx6ul() || is_imx8m()) if (readl(&bch_regs->hw_bch_debug1)) flag = 1; continue; @@ -1172,7 +1172,7 @@ int mxs_nand_setup_ecc(struct mtd_info *mtd) /* Set erase threshold to ecc strength for mx6ul, mx6qp and mx7 */ if (is_mx6dqp() || is_mx7() || - is_mx6ul()) + is_mx6ul() || is_imx8m()) writel(BCH_MODE_ERASE_THRESHOLD(geo->ecc_strength), &bch_regs->hw_bch_mode); @@ -1311,7 +1311,7 @@ int mxs_nand_init_spl(struct nand_chip *nand) nand_info->gpmi_regs = (struct mxs_gpmi_regs *)MXS_GPMI_BASE; nand_info->bch_regs = (struct mxs_bch_regs *)MXS_BCH_BASE; - if (is_mx6sx() || is_mx7()) + if (is_mx6sx() || is_mx7() || is_imx8m()) nand_info->max_ecc_strength_supported = 62; else nand_info->max_ecc_strength_supported = 40;