From: Dinh Nguyen Date: Wed, 27 Jan 2016 21:46:00 +0000 (-0600) Subject: net: phy: micrel: fix divisor value for KSZ9031 phy skew X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=ff7bd212cb8a0a80a113e25af7616ef0a24abdfc;p=u-boot.git net: phy: micrel: fix divisor value for KSZ9031 phy skew The picoseconds to register value divisor(ps_to_regval) should be 60 and not 200. Linux has KSZ9031_PS_TO_REG defined to be 60 as well. 60 is the correct divisor because the 4-bit skew values are defined from 0x0000(-420ps) to 0xffff(480ps), increments of 60. For example, a DTS skew value of 420, represents 0ps delay, which should be 0x7. With the previous divisor of 200, it would result in 0x2, which represents a -300ps delay. With this patch, ethernet on the SoCFPGA DE0 Atlas is now able to work with 1Gb ethernet. References: http://www.micrel.com/_PDF/Ethernet/datasheets/KSZ9031RNX.pdf -> page 26 Signed-off-by: Dinh Nguyen Acked-by: Marek Vasut Acked-by: Joe Hershberger --- diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c index 446d05ac5b..c3da1606dc 100644 --- a/drivers/net/phy/micrel.c +++ b/drivers/net/phy/micrel.c @@ -230,7 +230,7 @@ static int ksz90x1_of_config_group(struct phy_device *phydev, { struct udevice *dev = phydev->dev; struct phy_driver *drv = phydev->drv; - const int ps_to_regval = 200; + const int ps_to_regval = 60; int val[4]; int i, changed = 0, offset, max; u16 regval = 0;