From: Tim Harvey <tharvey@gateworks.com>
Date: Mon, 4 Feb 2019 21:10:48 +0000 (-0800)
Subject: imx: ventana: do not iomux UART1
X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=ff3568fcfe22504cbf61711350c49876a7b5dd7c;p=u-boot.git

imx: ventana: do not iomux UART1

The only UART that is garunteed on Ventana boards is UART2 (serial-console).

Remove UART1 pinmux as that it is not consistent across all Ventana boards
and U-Boot doesn't need it.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
---

diff --git a/board/gateworks/gw_ventana/common.c b/board/gateworks/gw_ventana/common.c
index 41fe8dc240..f577bdbdfb 100644
--- a/board/gateworks/gw_ventana/common.c
+++ b/board/gateworks/gw_ventana/common.c
@@ -18,12 +18,6 @@
 
 #include "common.h"
 
-/* UART1: Function varies per baseboard */
-static iomux_v3_cfg_t const uart1_pads[] = {
-	IOMUX_PADS(PAD_SD3_DAT6__UART1_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL)),
-	IOMUX_PADS(PAD_SD3_DAT7__UART1_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL)),
-};
-
 /* UART2: Serial Console */
 static iomux_v3_cfg_t const uart2_pads[] = {
 	IOMUX_PADS(PAD_SD4_DAT7__UART2_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL)),
@@ -32,7 +26,6 @@ static iomux_v3_cfg_t const uart2_pads[] = {
 
 void setup_iomux_uart(void)
 {
-	SETUP_IOMUX_PADS(uart1_pads);
 	SETUP_IOMUX_PADS(uart2_pads);
 }