From: Luca Ceresoli Date: Thu, 21 May 2020 13:06:25 +0000 (+0200) Subject: board: ti: use positive logic to detect idk boards X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=fedfa374fff3d1c82464e7c0ca3f6c088e3197e0;p=u-boot.git board: ti: use positive logic to detect idk boards am57x_idk_lcd_detect() exits immediately if a known board not having an LCD is found, i.e. a non-IDK board. This is annoying as we have to remember to add an extra OR clause for every new non-IDK board. Add a board_is_ti_idk() macro so that the logic becomes positive (detect LCD on IDK boards instead of not-known-without-LCD boards). Even more important, add the macro just below the board_is_*_idk() macros, so it is easy to remember to update it when adding a new IDK. Signed-off-by: Luca Ceresoli --- diff --git a/board/ti/am57xx/board.c b/board/ti/am57xx/board.c index c41aa24f95..511858a5e9 100644 --- a/board/ti/am57xx/board.c +++ b/board/ti/am57xx/board.c @@ -61,6 +61,10 @@ static int board_bootmode_has_emmc(void); #define board_is_am571x_idk() board_ti_is("AM571IDK") #define board_is_bbai() board_ti_is("BBONE-AI") +#define board_is_ti_idk() board_is_am574x_idk() || \ + board_is_am572x_idk() || \ + board_is_am571x_idk() + #ifdef CONFIG_DRIVER_TI_CPSW #include #endif @@ -666,7 +670,7 @@ void am57x_idk_lcd_detect(void) struct udevice *dev; /* Only valid for IDKs */ - if (board_is_x15() || board_is_am572x_evm() || board_is_bbai()) + if (!board_is_ti_idk()) return; /* Only AM571x IDK has gpio control detect.. so check that */