From: Wolfgang Denk <wd@denx.de>
Date: Wed, 9 Nov 2011 09:28:55 +0000 (+0000)
Subject: board/evb64260/i2c.c: Coding Style cleanup
X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=fecf63e41e73ad5fc1d941d7eefc7338f7c34edd;p=u-boot.git

board/evb64260/i2c.c: Coding Style cleanup

Make checkpatch-clean

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Eran Man <eran@nbase.co.il>
---

diff --git a/board/evb64260/i2c.c b/board/evb64260/i2c.c
index 88d0dac469..573f31f957 100644
--- a/board/evb64260/i2c.c
+++ b/board/evb64260/i2c.c
@@ -20,25 +20,22 @@ static void
 i2c_init(int speed, int slaveaddr)
 {
 	unsigned int n, m, freq, margin, power;
-	unsigned int actualFreq, actualN=0, actualM=0;
+	unsigned int actualFreq, actualN = 0, actualM = 0;
 	unsigned int control, status;
 	unsigned int minMargin = 0xffffffff;
 	unsigned int tclk = 125000000;
 
 	DP(puts("i2c_init\n"));
 
-	for(n = 0 ; n < 8 ; n++)
-	{
-		for(m = 0 ; m < 16 ; m++)
-		{
+	for (n = 0 ; n < 8 ; n++) {
+		for (m = 0 ; m < 16 ; m++) {
 			power = 2<<n; /* power = 2^(n+1) */
 			freq = tclk/(10*(m+1)*power);
 			if (speed > freq)
 				margin = speed - freq;
 			else
 				margin = freq - speed;
-			if(margin < minMargin)
-			{
+			if (margin < minMargin) {
 				minMargin   = margin;
 				actualFreq  = freq;
 				actualN	    = n;
@@ -91,13 +88,13 @@ i2c_start(void)
 		udelay(I2C_DELAY);
 		if (count > 20) {
 			GT_REG_WRITE(I2C_CONTROL, (0x1 << 4)); /*stop*/
-			return (status);
+			return status;
 		}
 		GT_REG_READ(I2C_STATUS_BAUDE_RATE, &status);
 		count++;
 	}
 
-	return (0);
+	return 0;
 }
 
 static uchar
@@ -110,9 +107,8 @@ i2c_select_device(uchar dev_addr, uchar read, int ten_bit)
 
 	/* Output slave address */
 
-	if (ten_bit) {
+	if (ten_bit)
 		bits = 10;
-	}
 
 	data = (dev_addr << 1);
 	/* set the read bit */
@@ -129,7 +125,7 @@ i2c_select_device(uchar dev_addr, uchar read, int ten_bit)
 		udelay(I2C_DELAY);
 		if (count > 20) {
 			GT_REG_WRITE(I2C_CONTROL, (0x1 << 4)); /*stop*/
-			return(status);
+			return status;
 		}
 		GT_REG_READ(I2C_STATUS_BAUDE_RATE, &status);
 		count++;
@@ -137,14 +133,14 @@ i2c_select_device(uchar dev_addr, uchar read, int ten_bit)
 
 	if (bits == 10) {
 		printf("10 bit I2C addressing not yet implemented\n");
-		return (0xff);
+		return 0xff;
 	}
 
-	return (0);
+	return 0;
 }
 
 static uchar
-i2c_get_data(uchar* return_data, int len) {
+i2c_get_data(uchar *return_data, int len) {
 
 	unsigned int data, status = 0;
 	int count = 0;
@@ -163,7 +159,7 @@ i2c_get_data(uchar* return_data, int len) {
 		count++;
 		while ((status & 0xff) != 0x50) {
 			udelay(I2C_DELAY);
-			if(count > 2) {
+			if (count > 2) {
 				GT_REG_WRITE(I2C_CONTROL, (0x1 << 4)); /*stop*/
 				return 0;
 			}
@@ -178,16 +174,16 @@ i2c_get_data(uchar* return_data, int len) {
 	RESET_REG_BITS(I2C_CONTROL, BIT2|BIT3);
 	while ((status & 0xff) != 0x58) {
 		udelay(I2C_DELAY);
-		if(count > 200) {
+		if (count > 200) {
 			GT_REG_WRITE(I2C_CONTROL, (0x1 << 4)); /*stop*/
-			return (status);
+			return status;
 		}
 		GT_REG_READ(I2C_STATUS_BAUDE_RATE, &status);
 		count++;
 	}
 	GT_REG_WRITE(I2C_CONTROL, (0x1 << 4)); /* stop */
 
-	return (0);
+	return 0;
 }
 
 static uchar
@@ -213,9 +209,9 @@ i2c_write_data(unsigned int data, int len)
 		count++;
 		while ((status & 0xff) != 0x28) {
 			udelay(I2C_DELAY);
-			if(count > 20) {
+			if (count > 20) {
 				GT_REG_WRITE(I2C_CONTROL, (0x1 << 4)); /*stop*/
-				return (status);
+				return status;
 			}
 			GT_REG_READ(I2C_STATUS_BAUDE_RATE, &status);
 			count++;
@@ -227,7 +223,7 @@ i2c_write_data(unsigned int data, int len)
 
 	udelay(I2C_DELAY * 10);
 
-	return (0);
+	return 0;
 }
 
 static uchar
@@ -254,11 +250,11 @@ i2c_set_dev_offset(uchar dev_addr, unsigned int offset, int ten_bit)
 		return status;
 	}
 
-	return (0);
+	return 0;
 }
 
 uchar
-i2c_read(uchar dev_addr, unsigned int offset, int len, uchar* data,
+i2c_read(uchar dev_addr, unsigned int offset, int len, uchar *data,
 	 int ten_bit)
 {
 	uchar status = 0;
@@ -266,7 +262,7 @@ i2c_read(uchar dev_addr, unsigned int offset, int len, uchar* data,
 
 	DP(puts("i2c_read\n"));
 
-	i2c_init(i2cFreq,0);
+	i2c_init(i2cFreq, 0);
 
 	status = i2c_start();
 
@@ -285,7 +281,7 @@ i2c_read(uchar dev_addr, unsigned int offset, int len, uchar* data,
 		return status;
 	}
 
-	i2c_init(i2cFreq,0);
+	i2c_init(i2cFreq, 0);
 
 	status = i2c_start();
 	if (status) {