From: Sean Anderson <sean.anderson@seco.com>
Date: Tue, 20 Apr 2021 15:03:12 +0000 (-0400)
Subject: test: Alphabetize dm Makefile
X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=fe3a2808bb5f86c738d47a4158117e32c349db0d;p=u-boot.git

test: Alphabetize dm Makefile

Recently, tests have been added primarily to the end of the dm Makefile.
This results in merge conflicts when two people add new tests at the
same time. To reduce these conflicts, alphabetize the makefile.

Signed-off-by: Sean Anderson <sean.anderson@seco.com>
---

diff --git a/test/dm/Makefile b/test/dm/Makefile
index 100e7701d2..52a8c932b8 100644
--- a/test/dm/Makefile
+++ b/test/dm/Makefile
@@ -21,26 +21,39 @@ ifneq ($(CONFIG_SANDBOX),)
 obj-$(CONFIG_ACPIGEN) += acpi.o
 obj-$(CONFIG_ACPIGEN) += acpigen.o
 obj-$(CONFIG_ACPIGEN) += acpi_dp.o
+obj-$(CONFIG_ADC) += adc.o
 obj-$(CONFIG_SOUND) += audio.o
+obj-$(CONFIG_AXI) += axi.o
 obj-$(CONFIG_BLK) += blk.o
 obj-$(CONFIG_BUTTON) += button.o
 obj-$(CONFIG_DM_BOOTCOUNT) += bootcount.o
 obj-$(CONFIG_CLK) += clk.o clk_ccf.o
+obj-$(CONFIG_CPU) += cpu.o
 obj-$(CONFIG_CROS_EC) += cros_ec.o
 obj-$(CONFIG_DEVRES) += devres.o
+obj-$(CONFIG_DMA) += dma.o
 obj-$(CONFIG_VIDEO_MIPI_DSI) += dsi_host.o
 obj-$(CONFIG_DM_DSA) += dsa.o
 obj-$(CONFIG_DM_ETH) += eth.o
+ifneq ($(CONFIG_EFI_PARTITION),)
+obj-$(CONFIG_FASTBOOT_FLASH_MMC) += fastboot.o
+endif
 obj-$(CONFIG_FIRMWARE) += firmware.o
 obj-$(CONFIG_DM_GPIO) += gpio.o
 obj-$(CONFIG_DM_HWSPINLOCK) += hwspinlock.o
 obj-$(CONFIG_DM_I2C) += i2c.o
 obj-$(CONFIG_SOUND) += i2s.o
 obj-y += irq.o
+obj-$(CONFIG_CLK_K210_SET_RATE) += k210_pll.o
 obj-$(CONFIG_LED) += led.o
 obj-$(CONFIG_DM_MAILBOX) += mailbox.o
+obj-$(CONFIG_DM_MDIO) += mdio.o
+obj-$(CONFIG_DM_MDIO_MUX) += mdio_mux.o
+obj-$(CONFIG_MISC) += misc.o
 obj-$(CONFIG_DM_MMC) += mmc.o
 obj-$(CONFIG_CMD_MUX) += mux-cmd.o
+obj-$(CONFIG_MULTIPLEXER) += mux-emul.o
+obj-$(CONFIG_MUX_MMIO) += mux-mmio.o
 obj-y += fdtdec.o
 obj-$(CONFIG_UT_DM) += nop.o
 obj-y += ofnode.o
@@ -53,53 +66,40 @@ obj-$(CONFIG_P2SB) += p2sb.o
 obj-$(CONFIG_PCI_ENDPOINT) += pci_ep.o
 obj-$(CONFIG_PCH) += pch.o
 obj-$(CONFIG_PHY) += phy.o
+ifneq ($(CONFIG_PINMUX),)
+obj-$(CONFIG_PINCONF) += pinmux.o
+endif
 obj-$(CONFIG_POWER_DOMAIN) += power-domain.o
 obj-$(CONFIG_ACPI_PMC) += pmc.o
+obj-$(CONFIG_DM_PMIC) += pmic.o
 obj-$(CONFIG_DM_PWM) += pwm.o
+obj-$(CONFIG_QFW) += qfw.o
 obj-$(CONFIG_RAM) += ram.o
 obj-y += regmap.o
 obj-$(CONFIG_REMOTEPROC) += remoteproc.o
 obj-$(CONFIG_DM_RESET) += reset.o
 obj-$(CONFIG_SYSRESET) += sysreset.o
+obj-$(CONFIG_DM_REGULATOR) += regulator.o
+obj-$(CONFIG_DM_RNG) += rng.o
 obj-$(CONFIG_DM_RTC) += rtc.o
+obj-$(CONFIG_SCMI_FIRMWARE) += scmi.o
+obj-$(CONFIG_DM_SERIAL) += serial.o
 obj-$(CONFIG_DM_SPI_FLASH) += sf.o
+obj-$(CONFIG_SIMPLE_BUS) += simple-bus.o
+obj-$(CONFIG_SIMPLE_PM_BUS) += simple-pm-bus.o
 obj-$(CONFIG_SMEM) += smem.o
-obj-$(CONFIG_DM_SPI) += spi.o
-obj-y += syscon.o
-obj-$(CONFIG_MUX_MMIO) += mux-mmio.o
-obj-$(CONFIG_MULTIPLEXER) += mux-emul.o
-obj-$(CONFIG_DM_USB) += usb.o
-obj-$(CONFIG_DM_PMIC) += pmic.o
-obj-$(CONFIG_DM_REGULATOR) += regulator.o
-obj-$(CONFIG_TIMER) += timer.o
-obj-$(CONFIG_DM_VIDEO) += video.o
-obj-$(CONFIG_ADC) += adc.o
-obj-$(CONFIG_SPMI) += spmi.o
-obj-$(CONFIG_WDT) += wdt.o
-obj-$(CONFIG_AXI) += axi.o
-obj-$(CONFIG_MISC) += misc.o
-obj-$(CONFIG_DM_SERIAL) += serial.o
-obj-$(CONFIG_CPU) += cpu.o
 obj-$(CONFIG_SOC_DEVICE) += soc.o
 obj-$(CONFIG_SOUND) += sound.o
+obj-$(CONFIG_DM_SPI) += spi.o
+obj-$(CONFIG_SPMI) += spmi.o
+obj-y += syscon.o
+obj-$(CONFIG_RESET_SYSCON) += syscon-reset.o
 obj-$(CONFIG_SYSINFO) += sysinfo.o
 obj-$(CONFIG_TEE) += tee.o
+obj-$(CONFIG_TIMER) += timer.o
+obj-$(CONFIG_DM_USB) += usb.o
+obj-$(CONFIG_DM_VIDEO) += video.o
 obj-$(CONFIG_VIRTIO_SANDBOX) += virtio.o
-obj-$(CONFIG_DMA) += dma.o
-obj-$(CONFIG_DM_MDIO) += mdio.o
-obj-$(CONFIG_DM_MDIO_MUX) += mdio_mux.o
-obj-$(CONFIG_DM_RNG) += rng.o
-obj-$(CONFIG_CLK_K210_SET_RATE) += k210_pll.o
-obj-$(CONFIG_SIMPLE_BUS) += simple-bus.o
-obj-$(CONFIG_SIMPLE_PM_BUS) += simple-pm-bus.o
-obj-$(CONFIG_RESET_SYSCON) += syscon-reset.o
-obj-$(CONFIG_SCMI_FIRMWARE) += scmi.o
-ifneq ($(CONFIG_PINMUX),)
-obj-$(CONFIG_PINCONF) += pinmux.o
-endif
-ifneq ($(CONFIG_EFI_PARTITION),)
-obj-$(CONFIG_FASTBOOT_FLASH_MMC) += fastboot.o
-endif
-obj-$(CONFIG_QFW) += qfw.o
+obj-$(CONFIG_WDT) += wdt.o
 endif
 endif # !SPL