From: Dylan Hung Date: Mon, 14 Dec 2020 05:54:24 +0000 (+0800) Subject: ram: aspeed: Add AST2600 DRAM control support X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=fde93143469fbf1ee6fdd3471d72f27dce6ecc5c;p=u-boot.git ram: aspeed: Add AST2600 DRAM control support AST2600 supports DDR4 SDRAM with maximum speed DDR4-1600. The DDR4 DRAM types including 128MbX16 (2Gb), 256MbX16 (4Gb), 512MbX16 (8Gb), 1GbX16 (16Gb), and 1GbX8 TwinDie (16Gb) are supported. Signed-off-by: Dylan Hung Signed-off-by: Chia-Wei, Wang Reviewed-by: Ryan Chen --- diff --git a/arch/arm/include/asm/arch-aspeed/sdram_ast2600.h b/arch/arm/include/asm/arch-aspeed/sdram_ast2600.h new file mode 100644 index 0000000000..d2408c0020 --- /dev/null +++ b/arch/arm/include/asm/arch-aspeed/sdram_ast2600.h @@ -0,0 +1,163 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright (c) Aspeed Technology Inc. + */ +#ifndef _ASM_ARCH_SDRAM_AST2600_H +#define _ASM_ARCH_SDRAM_AST2600_H + +/* keys for unlocking HW */ +#define SDRAM_UNLOCK_KEY 0xFC600309 +#define SDRAM_VIDEO_UNLOCK_KEY 0x00440003 + +/* Fixed priority DRAM Requests mask */ +#define REQ_PRI_VGA_HW_CURSOR_R 0 +#define REQ_PRI_VGA_CRT_R 1 +#define REQ_PRI_SOC_DISPLAY_CTRL_R 2 +#define REQ_PRI_PCIE_BUS1_RW 3 +#define REQ_PRI_VIDEO_HIGH_PRI_W 4 +#define REQ_PRI_CPU_RW 5 +#define REQ_PRI_SLI_RW 6 +#define REQ_PRI_PCIE_BUS2_RW 7 +#define REQ_PRI_USB2_0_HUB_EHCI1_DMA_RW 8 +#define REQ_PRI_USB2_0_DEV_EHCI2_DMA_RW 9 +#define REQ_PRI_USB1_1_UHCI_HOST_RW 10 +#define REQ_PRI_AHB_BUS_RW 11 +#define REQ_PRI_CM3_DATA_RW 12 +#define REQ_PRI_CM3_INST_R 13 +#define REQ_PRI_MAC0_DMA_RW 14 +#define REQ_PRI_MAC1_DMA_RW 15 +#define REQ_PRI_SDIO_DMA_RW 16 +#define REQ_PRI_PILOT_ENGINE_RW 17 +#define REQ_PRI_XDMA1_RW 18 +#define REQ_PRI_MCTP1_RW 19 +#define REQ_PRI_VIDEO_FLAG_RW 20 +#define REQ_PRI_VIDEO_LOW_PRI_W 21 +#define REQ_PRI_2D_ENGINE_DATA_RW 22 +#define REQ_PRI_ENC_ENGINE_RW 23 +#define REQ_PRI_MCTP2_RW 24 +#define REQ_PRI_XDMA2_RW 25 +#define REQ_PRI_ECC_RSA_RW 26 + +#define MCR30_RESET_DLL_DELAY_EN BIT(4) +#define MCR30_MODE_REG_SEL_SHIFT 1 +#define MCR30_MODE_REG_SEL_MASK GENMASK(3, 1) +#define MCR30_SET_MODE_REG BIT(0) + +#define MCR30_SET_MR(mr) ((mr << MCR30_MODE_REG_SEL_SHIFT) | MCR30_SET_MODE_REG) + +#define MCR34_SELF_REFRESH_STATUS_MASK GENMASK(30, 28) + +#define MCR34_ODT_DELAY_SHIFT 12 +#define MCR34_ODT_DELAY_MASK GENMASK(15, 12) +#define MCR34_ODT_EXT_SHIFT 10 +#define MCR34_ODT_EXT_MASK GENMASK(11, 10) +#define MCR34_ODT_AUTO_ON BIT(9) +#define MCR34_ODT_EN BIT(8) +#define MCR34_RESETN_DIS BIT(7) +#define MCR34_MREQI_DIS BIT(6) +#define MCR34_MREQ_BYPASS_DIS BIT(5) +#define MCR34_RGAP_CTRL_EN BIT(4) +#define MCR34_CKE_OUT_IN_SELF_REF_DIS BIT(3) +#define MCR34_FOURCE_SELF_REF_EN BIT(2) +#define MCR34_AUTOPWRDN_EN BIT(1) +#define MCR34_CKE_EN BIT(0) + +#define MCR38_RW_MAX_GRANT_CNT_RQ_SHIFT 16 +#define MCR38_RW_MAX_GRANT_CNT_RQ_MASK GENMASK(20, 16) + +/* default request queued limitation mask (0xFFBBFFF4) */ +#define MCR3C_DEFAULT_MASK \ + ~(REQ_PRI_VGA_HW_CURSOR_R | REQ_PRI_VGA_CRT_R | REQ_PRI_PCIE_BUS1_RW | \ + REQ_PRI_XDMA1_RW | REQ_PRI_2D_ENGINE_DATA_RW) + +#define MCR50_RESET_ALL_INTR BIT(31) +#define SDRAM_CONF_ECC_AUTO_SCRUBBING BIT(9) +#define SDRAM_CONF_SCRAMBLE BIT(8) +#define SDRAM_CONF_ECC_EN BIT(7) +#define SDRAM_CONF_DUALX8 BIT(5) +#define SDRAM_CONF_DDR4 BIT(4) +#define SDRAM_CONF_VGA_SIZE_SHIFT 2 +#define SDRAM_CONF_VGA_SIZE_MASK GENMASK(3, 2) +#define SDRAM_CONF_CAP_SHIFT 0 +#define SDRAM_CONF_CAP_MASK GENMASK(1, 0) + +#define SDRAM_CONF_CAP_256M 0 +#define SDRAM_CONF_CAP_512M 1 +#define SDRAM_CONF_CAP_1024M 2 +#define SDRAM_CONF_CAP_2048M 3 +#define SDRAM_CONF_ECC_SETUP (SDRAM_CONF_ECC_AUTO_SCRUBBING | SDRAM_CONF_ECC_EN) + +#define SDRAM_MISC_DDR4_TREFRESH (1 << 3) + +#define SDRAM_PHYCTRL0_PLL_LOCKED BIT(4) +#define SDRAM_PHYCTRL0_NRST BIT(2) +#define SDRAM_PHYCTRL0_INIT BIT(0) + +/* MCR0C */ +#define SDRAM_REFRESH_PERIOD_ZQCS_SHIFT 16 +#define SDRAM_REFRESH_PERIOD_ZQCS_MASK GENMASK(31, 16) +#define SDRAM_REFRESH_PERIOD_SHIFT 8 +#define SDRAM_REFRESH_PERIOD_MASK GENMASK(15, 8) +#define SDRAM_REFRESH_ZQCS_EN BIT(7) +#define SDRAM_RESET_DLL_ZQCL_EN BIT(6) +#define SDRAM_LOW_PRI_REFRESH_EN BIT(5) +#define SDRAM_FORCE_PRECHARGE_EN BIT(4) +#define SDRAM_REFRESH_EN BIT(0) + +#define SDRAM_TEST_LEN_SHIFT 4 +#define SDRAM_TEST_LEN_MASK 0xfffff +#define SDRAM_TEST_START_ADDR_SHIFT 24 +#define SDRAM_TEST_START_ADDR_MASK 0x3f + +#define SDRAM_TEST_EN (1 << 0) +#define SDRAM_TEST_MODE_SHIFT 1 +#define SDRAM_TEST_MODE_MASK (0x3 << SDRAM_TEST_MODE_SHIFT) +#define SDRAM_TEST_MODE_WO (0x0 << SDRAM_TEST_MODE_SHIFT) +#define SDRAM_TEST_MODE_RB (0x1 << SDRAM_TEST_MODE_SHIFT) +#define SDRAM_TEST_MODE_RW (0x2 << SDRAM_TEST_MODE_SHIFT) + +#define SDRAM_TEST_GEN_MODE_SHIFT 3 +#define SDRAM_TEST_GEN_MODE_MASK (7 << SDRAM_TEST_GEN_MODE_SHIFT) +#define SDRAM_TEST_TWO_MODES (1 << 6) +#define SDRAM_TEST_ERRSTOP (1 << 7) +#define SDRAM_TEST_DONE (1 << 12) +#define SDRAM_TEST_FAIL (1 << 13) + +#define SDRAM_AC_TRFC_SHIFT 0 +#define SDRAM_AC_TRFC_MASK 0xff + +#define SDRAM_ECC_RANGE_ADDR_MASK GENMASK(30, 20) +#define SDRAM_ECC_RANGE_ADDR_SHIFT 20 + +#ifndef __ASSEMBLY__ +struct ast2600_sdrammc_regs { + u32 protection_key; /* offset 0x00 */ + u32 config; /* offset 0x04 */ + u32 gm_protection_key; /* offset 0x08 */ + u32 refresh_timing; /* offset 0x0C */ + u32 ac_timing[4]; /* offset 0x10 ~ 0x1C */ + u32 mr01_mode_setting; /* offset 0x20 */ + u32 mr23_mode_setting; /* offset 0x24 */ + u32 mr45_mode_setting; /* offset 0x28 */ + u32 mr6_mode_setting; /* offset 0x2C */ + u32 mode_setting_control; /* offset 0x30 */ + u32 power_ctrl; /* offset 0x34 */ + u32 arbitration_ctrl; /* offset 0x38 */ + u32 req_limit_mask; /* offset 0x3C */ + u32 max_grant_len[4]; /* offset 0x40 ~ 0x4C */ + u32 intr_ctrl; /* offset 0x50 */ + u32 ecc_range_ctrl; /* offset 0x54 */ + u32 first_ecc_err_addr; /* offset 0x58 */ + u32 last_ecc_err_addr; /* offset 0x5C */ + u32 phy_ctrl[4]; /* offset 0x60 ~ 0x6C */ + u32 ecc_test_ctrl; /* offset 0x70 */ + u32 test_addr; /* offset 0x74 */ + u32 test_fail_dq_bit; /* offset 0x78 */ + u32 test_init_val; /* offset 0x7C */ + u32 req_input_ctrl; /* offset 0x80 */ + u32 req_high_pri_ctrl; /* offset 0x84 */ + u32 reserved0[6]; /* offset 0x88 ~ 0x9C */ +}; +#endif /* __ASSEMBLY__ */ + +#endif /* _ASM_ARCH_SDRAM_AST2600_H */ diff --git a/drivers/ram/aspeed/Kconfig b/drivers/ram/aspeed/Kconfig index 020c913188..049b9dc249 100644 --- a/drivers/ram/aspeed/Kconfig +++ b/drivers/ram/aspeed/Kconfig @@ -1,4 +1,5 @@ if RAM || SPL_RAM + config ASPEED_DDR4_DUALX8 bool "Enable Dual X8 DDR4 die" depends on DM && OF_CONTROL && ARCH_ASPEED @@ -7,4 +8,62 @@ config ASPEED_DDR4_DUALX8 Say Y if dual X8 DDR4 die is used on the board. The aspeed ddr sdram controller needs to know if the memory chip mounted on the board is dual x8 die or not. Or it may get the wrong size of the memory space. -endif + +if ASPEED_AST2600 + +choice + prompt "DDR4 target date rate" + default ASPEED_DDR4_1600 + +config ASPEED_DDR4_400 + bool "DDR4 targets at 400Mbps" + depends on DM && OF_CONTROL && ARCH_ASPEED + help + select DDR4 target data rate at 400M + +config ASPEED_DDR4_800 + bool "DDR4 targets at 800Mbps" + depends on DM && OF_CONTROL && ARCH_ASPEED + help + select DDR4 target data rate at 800M + +config ASPEED_DDR4_1333 + bool "DDR4 targets at 1333Mbps" + depends on DM && OF_CONTROL && ARCH_ASPEED + help + select DDR4 target data rate at 1333M + +config ASPEED_DDR4_1600 + bool "DDR4 targets at 1600Mbps" + depends on DM && OF_CONTROL && ARCH_ASPEED + help + select DDR4 target data rate at 1600M +endchoice + +config ASPEED_BYPASS_SELFTEST + bool "bypass self test during DRAM initialization" + default n + help + Say Y here to bypass DRAM self test to speed up the boot time + +config ASPEED_ECC + bool "aspeed SDRAM error correcting code" + depends on DM && OF_CONTROL && ARCH_ASPEED + default n + help + enable SDRAM ECC function + +if ASPEED_ECC +config ASPEED_ECC_SIZE + int "ECC size: 0=driver auto-caluated" + depends on ASPEED_ECC + default 0 + help + SDRAM size with the error correcting code enabled. The unit is + in Megabytes. Noted that only the 8/9 of the configured size + can be used by the system. The remaining 1/9 will be used by + the ECC engine. If the size is set to 0, the sdram driver will + calculate the SDRAM size and set the whole range be ECC enabled. +endif # end of ASPEED_ECC +endif # end of ASPEED_AST2600 +endif # end of RAM || SPL_RAM diff --git a/drivers/ram/aspeed/Makefile b/drivers/ram/aspeed/Makefile index af604f8a4b..7ac10af1c2 100644 --- a/drivers/ram/aspeed/Makefile +++ b/drivers/ram/aspeed/Makefile @@ -1,3 +1,4 @@ # SPDX-License-Identifier: GPL-2.0+ # -obj-$(CONFIG_ASPEED_AST2500) += sdram_ast2500.o \ No newline at end of file +obj-$(CONFIG_ASPEED_AST2500) += sdram_ast2500.o +obj-$(CONFIG_ASPEED_AST2600) += sdram_ast2600.o diff --git a/drivers/ram/aspeed/sdram_ast2600.c b/drivers/ram/aspeed/sdram_ast2600.c new file mode 100644 index 0000000000..fd4235225a --- /dev/null +++ b/drivers/ram/aspeed/sdram_ast2600.c @@ -0,0 +1,1061 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) ASPEED Technology Inc. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define DDR_PHY_TBL_CHG_ADDR 0xaeeddeea +#define DDR_PHY_TBL_END 0xaeededed + +#if defined(CONFIG_ASPEED_DDR4_800) +u32 ast2600_sdramphy_config[165] = { + 0x1e6e0100, // start address + 0x00000000, // phyr000 + 0x0c002062, // phyr004 + 0x1a7a0063, // phyr008 + 0x5a7a0063, // phyr00c + 0x1a7a0063, // phyr010 + 0x1a7a0063, // phyr014 + 0x20000000, // phyr018 + 0x20000000, // phyr01c + 0x20000000, // phyr020 + 0x20000000, // phyr024 + 0x00000008, // phyr028 + 0x00000000, // phyr02c + 0x00077600, // phyr030 + 0x00000000, // phyr034 + 0x00000000, // phyr038 + 0x20000000, // phyr03c + 0x50506000, // phyr040 + 0x50505050, // phyr044 + 0x00002f07, // phyr048 + 0x00003080, // phyr04c + 0x04000000, // phyr050 + 0x00000200, // phyr054 + 0x03140201, // phyr058 + 0x04800000, // phyr05c + 0x0800044e, // phyr060 + 0x00000000, // phyr064 + 0x00180008, // phyr068 + 0x00e00400, // phyr06c + 0x00140206, // phyr070 + 0x1d4c0000, // phyr074 + 0x493e0107, // phyr078 + 0x08060404, // phyr07c + 0x90000a00, // phyr080 + 0x06420618, // phyr084 + 0x00001002, // phyr088 + 0x05701016, // phyr08c + 0x10000000, // phyr090 + 0xaeeddeea, // change address + 0x1e6e019c, // new address + 0x20202020, // phyr09c + 0x20202020, // phyr0a0 + 0x00002020, // phyr0a4 + 0x00002020, // phyr0a8 + 0x00000001, // phyr0ac + 0xaeeddeea, // change address + 0x1e6e01cc, // new address + 0x01010101, // phyr0cc + 0x01010101, // phyr0d0 + 0x80808080, // phyr0d4 + 0x80808080, // phyr0d8 + 0xaeeddeea, // change address + 0x1e6e0288, // new address + 0x80808080, // phyr188 + 0x80808080, // phyr18c + 0x80808080, // phyr190 + 0x80808080, // phyr194 + 0xaeeddeea, // change address + 0x1e6e02f8, // new address + 0x90909090, // phyr1f8 + 0x88888888, // phyr1fc + 0xaeeddeea, // change address + 0x1e6e0300, // new address + 0x00000000, // phyr200 + 0xaeeddeea, // change address + 0x1e6e0194, // new address + 0x80118260, // phyr094 + 0xaeeddeea, // change address + 0x1e6e019c, // new address + 0x20202020, // phyr09c + 0x20202020, // phyr0a0 + 0x00002020, // phyr0a4 + 0x80000000, // phyr0a8 + 0x00000001, // phyr0ac + 0xaeeddeea, // change address + 0x1e6e0318, // new address + 0x09222719, // phyr218 + 0x00aa4403, // phyr21c + 0xaeeddeea, // change address + 0x1e6e0198, // new address + 0x08060000, // phyr098 + 0xaeeddeea, // change address + 0x1e6e01b0, // new address + 0x00000000, // phyr0b0 + 0x00000000, // phyr0b4 + 0x00000000, // phyr0b8 + 0x00000000, // phyr0bc + 0x00000000, // phyr0c0 + 0x00000000, // phyr0c4 + 0x000aff2c, // phyr0c8 + 0xaeeddeea, // change address + 0x1e6e01dc, // new address + 0x00080000, // phyr0dc + 0x00000000, // phyr0e0 + 0xaa55aa55, // phyr0e4 + 0x55aa55aa, // phyr0e8 + 0xaaaa5555, // phyr0ec + 0x5555aaaa, // phyr0f0 + 0xaa55aa55, // phyr0f4 + 0x55aa55aa, // phyr0f8 + 0xaaaa5555, // phyr0fc + 0x5555aaaa, // phyr100 + 0xaa55aa55, // phyr104 + 0x55aa55aa, // phyr108 + 0xaaaa5555, // phyr10c + 0x5555aaaa, // phyr110 + 0xaa55aa55, // phyr114 + 0x55aa55aa, // phyr118 + 0xaaaa5555, // phyr11c + 0x5555aaaa, // phyr120 + 0x20202020, // phyr124 + 0x20202020, // phyr128 + 0x20202020, // phyr12c + 0x20202020, // phyr130 + 0x20202020, // phyr134 + 0x20202020, // phyr138 + 0x20202020, // phyr13c + 0x20202020, // phyr140 + 0x20202020, // phyr144 + 0x20202020, // phyr148 + 0x20202020, // phyr14c + 0x20202020, // phyr150 + 0x20202020, // phyr154 + 0x20202020, // phyr158 + 0x20202020, // phyr15c + 0x20202020, // phyr160 + 0x20202020, // phyr164 + 0x20202020, // phyr168 + 0x20202020, // phyr16c + 0x20202020, // phyr170 + 0xaeeddeea, // change address + 0x1e6e0298, // new address + 0x20200800, // phyr198 + 0x20202020, // phyr19c + 0x20202020, // phyr1a0 + 0x20202020, // phyr1a4 + 0x20202020, // phyr1a8 + 0x20202020, // phyr1ac + 0x20202020, // phyr1b0 + 0x20202020, // phyr1b4 + 0x20202020, // phyr1b8 + 0x20202020, // phyr1bc + 0x20202020, // phyr1c0 + 0x20202020, // phyr1c4 + 0x20202020, // phyr1c8 + 0x20202020, // phyr1cc + 0x20202020, // phyr1d0 + 0x20202020, // phyr1d4 + 0x20202020, // phyr1d8 + 0x20202020, // phyr1dc + 0x20202020, // phyr1e0 + 0x20202020, // phyr1e4 + 0x00002020, // phyr1e8 + 0xaeeddeea, // change address + 0x1e6e0304, // new address + 0x00000800, // phyr204 + 0xaeeddeea, // change address + 0x1e6e027c, // new address + 0x4e400000, // phyr17c + 0x59595959, // phyr180 + 0x40404040, // phyr184 + 0xaeeddeea, // change address + 0x1e6e02f4, // new address + 0x00000059, // phyr1f4 + 0xaeededed, // end +}; +#else +u32 ast2600_sdramphy_config[165] = { + 0x1e6e0100, // start address + 0x00000000, // phyr000 + 0x0c002062, // phyr004 + 0x1a7a0063, // phyr008 + 0x5a7a0063, // phyr00c + 0x1a7a0063, // phyr010 + 0x1a7a0063, // phyr014 + 0x20000000, // phyr018 + 0x20000000, // phyr01c + 0x20000000, // phyr020 + 0x20000000, // phyr024 + 0x00000008, // phyr028 + 0x00000000, // phyr02c + 0x00077600, // phyr030 + 0x00000000, // phyr034 + 0x00000000, // phyr038 + 0x20000000, // phyr03c + 0x50506000, // phyr040 + 0x50505050, // phyr044 + 0x00002f07, // phyr048 + 0x00003080, // phyr04c + 0x04000000, // phyr050 + 0x00000200, // phyr054 + 0x03140501, // phyr058-rtt:40 + 0x04800000, // phyr05c + 0x0800044e, // phyr060 + 0x00000000, // phyr064 + 0x00180008, // phyr068 + 0x00e00400, // phyr06c + 0x00140206, // phyr070 + 0x1d4c0000, // phyr074 + 0x493e0107, // phyr078 + 0x08060404, // phyr07c + 0x90000a00, // phyr080 + 0x06420c30, // phyr084 + 0x00001002, // phyr088 + 0x05701016, // phyr08c + 0x10000000, // phyr090 + 0xaeeddeea, // change address + 0x1e6e019c, // new address + 0x20202020, // phyr09c + 0x20202020, // phyr0a0 + 0x00002020, // phyr0a4 + 0x00002020, // phyr0a8 + 0x00000001, // phyr0ac + 0xaeeddeea, // change address + 0x1e6e01cc, // new address + 0x01010101, // phyr0cc + 0x01010101, // phyr0d0 + 0x80808080, // phyr0d4 + 0x80808080, // phyr0d8 + 0xaeeddeea, // change address + 0x1e6e0288, // new address + 0x80808080, // phyr188 + 0x80808080, // phyr18c + 0x80808080, // phyr190 + 0x80808080, // phyr194 + 0xaeeddeea, // change address + 0x1e6e02f8, // new address + 0x90909090, // phyr1f8 + 0x88888888, // phyr1fc + 0xaeeddeea, // change address + 0x1e6e0300, // new address + 0x00000000, // phyr200 + 0xaeeddeea, // change address + 0x1e6e0194, // new address + 0x801112e0, // phyr094 - bit12=1,15=0,- write window is ok + 0xaeeddeea, // change address + 0x1e6e019c, // new address + 0x20202020, // phyr09c + 0x20202020, // phyr0a0 + 0x00002020, // phyr0a4 + 0x80000000, // phyr0a8 + 0x00000001, // phyr0ac + 0xaeeddeea, // change address + 0x1e6e0318, // new address + 0x09222719, // phyr218 + 0x00aa4403, // phyr21c + 0xaeeddeea, // change address + 0x1e6e0198, // new address + 0x08060000, // phyr098 + 0xaeeddeea, // change address + 0x1e6e01b0, // new address + 0x00000000, // phyr0b0 + 0x00000000, // phyr0b4 + 0x00000000, // phyr0b8 + 0x00000000, // phyr0bc + 0x00000000, // phyr0c0 - ori + 0x00000000, // phyr0c4 + 0x000aff2c, // phyr0c8 + 0xaeeddeea, // change address + 0x1e6e01dc, // new address + 0x00080000, // phyr0dc + 0x00000000, // phyr0e0 + 0xaa55aa55, // phyr0e4 + 0x55aa55aa, // phyr0e8 + 0xaaaa5555, // phyr0ec + 0x5555aaaa, // phyr0f0 + 0xaa55aa55, // phyr0f4 + 0x55aa55aa, // phyr0f8 + 0xaaaa5555, // phyr0fc + 0x5555aaaa, // phyr100 + 0xaa55aa55, // phyr104 + 0x55aa55aa, // phyr108 + 0xaaaa5555, // phyr10c + 0x5555aaaa, // phyr110 + 0xaa55aa55, // phyr114 + 0x55aa55aa, // phyr118 + 0xaaaa5555, // phyr11c + 0x5555aaaa, // phyr120 + 0x20202020, // phyr124 + 0x20202020, // phyr128 + 0x20202020, // phyr12c + 0x20202020, // phyr130 + 0x20202020, // phyr134 + 0x20202020, // phyr138 + 0x20202020, // phyr13c + 0x20202020, // phyr140 + 0x20202020, // phyr144 + 0x20202020, // phyr148 + 0x20202020, // phyr14c + 0x20202020, // phyr150 + 0x20202020, // phyr154 + 0x20202020, // phyr158 + 0x20202020, // phyr15c + 0x20202020, // phyr160 + 0x20202020, // phyr164 + 0x20202020, // phyr168 + 0x20202020, // phyr16c + 0x20202020, // phyr170 + 0xaeeddeea, // change address + 0x1e6e0298, // new address + 0x20200800, // phyr198 + 0x20202020, // phyr19c + 0x20202020, // phyr1a0 + 0x20202020, // phyr1a4 + 0x20202020, // phyr1a8 + 0x20202020, // phyr1ac + 0x20202020, // phyr1b0 + 0x20202020, // phyr1b4 + 0x20202020, // phyr1b8 + 0x20202020, // phyr1bc + 0x20202020, // phyr1c0 + 0x20202020, // phyr1c4 + 0x20202020, // phyr1c8 + 0x20202020, // phyr1cc + 0x20202020, // phyr1d0 + 0x20202020, // phyr1d4 + 0x20202020, // phyr1d8 + 0x20202020, // phyr1dc + 0x20202020, // phyr1e0 + 0x20202020, // phyr1e4 + 0x00002020, // phyr1e8 + 0xaeeddeea, // change address + 0x1e6e0304, // new address + 0x00000800, // phyr204 + 0xaeeddeea, // change address + 0x1e6e027c, // new address + 0x4e400000, // phyr17c + 0x59595959, // phyr180 + 0x40404040, // phyr184 + 0xaeeddeea, // change address + 0x1e6e02f4, // new address + 0x00000059, // phyr1f4 + 0xaeededed, // end +}; +#endif + +/* MPLL configuration */ +#define SCU_MPLL_FREQ_400M 0x0008405F +#define SCU_MPLL_EXT_400M 0x0000002F +#define SCU_MPLL_FREQ_333M 0x00488299 +#define SCU_MPLL_EXT_333M 0x0000014C +#define SCU_MPLL_FREQ_200M 0x0078007F +#define SCU_MPLL_EXT_200M 0x0000003F +#define SCU_MPLL_FREQ_100M 0x0078003F +#define SCU_MPLL_EXT_100M 0x0000001F + +#if defined(CONFIG_ASPEED_DDR4_1600) +#define SCU_MPLL_FREQ_CFG SCU_MPLL_FREQ_400M +#define SCU_MPLL_EXT_CFG SCU_MPLL_EXT_400M +#elif defined(CONFIG_ASPEED_DDR4_1333) +#define SCU_MPLL_FREQ_CFG SCU_MPLL_FREQ_333M +#define SCU_MPLL_EXT_CFG SCU_MPLL_EXT_333M +#elif defined(CONFIG_ASPEED_DDR4_800) +#define SCU_MPLL_FREQ_CFG SCU_MPLL_FREQ_200M +#define SCU_MPLL_EXT_CFG SCU_MPLL_EXT_200M +#elif defined(CONFIG_ASPEED_DDR4_400) +#define SCU_MPLL_FREQ_CFG SCU_MPLL_FREQ_100M +#define SCU_MPLL_EXT_CFG SCU_MPLL_EXT_100M +#else +#error "undefined DDR4 target rate\n" +#endif + +/* + * AC timing and SDRAM mode register setting + * for real chip are derived from the model GDDR4-1600 + */ +#define DDR4_MR01_MODE 0x03010510 +#define DDR4_MR23_MODE 0x00000000 +#define DDR4_MR45_MODE 0x04000000 +#define DDR4_MR6_MODE 0x00000400 +#define DDR4_TRFC_1600 0x467299f1 +#define DDR4_TRFC_1333 0x3a5f80c9 +#define DDR4_TRFC_800 0x23394c78 +#define DDR4_TRFC_400 0x111c263c + +#if defined(CONFIG_ASPEED_DDR4_1600) +#define DDR4_TRFC DDR4_TRFC_1600 +#define DDR4_PHY_TRAIN_TRFC 0xc30 +#elif defined(CONFIG_ASPEED_DDR4_1333) +#define DDR4_TRFC DDR4_TRFC_1333 +#define DDR4_PHY_TRAIN_TRFC 0xa25 +#elif defined(CONFIG_ASPEED_DDR4_800) +#define DDR4_TRFC DDR4_TRFC_800 +#define DDR4_PHY_TRAIN_TRFC 0x618 +#elif defined(CONFIG_ASPEED_DDR4_400) +#define DDR4_TRFC DDR4_TRFC_400 +#define DDR4_PHY_TRAIN_TRFC 0x30c +#else +#error "undefined tRFC setting" +#endif + +/* supported SDRAM size */ +#define SDRAM_SIZE_1KB (1024U) +#define SDRAM_SIZE_1MB (SDRAM_SIZE_1KB * SDRAM_SIZE_1KB) +#define SDRAM_MIN_SIZE (256 * SDRAM_SIZE_1MB) +#define SDRAM_MAX_SIZE (2048 * SDRAM_SIZE_1MB) + +DECLARE_GLOBAL_DATA_PTR; + +static const u32 ddr4_ac_timing[4] = { + 0x040e0307, 0x0f4711f1, 0x0e060304, 0x00001240 }; +static const u32 ddr_max_grant_params[4] = { + 0x44444444, 0x44444444, 0x44444444, 0x44444444 }; + +struct dram_info { + struct ram_info info; + struct clk ddr_clk; + struct ast2600_sdrammc_regs *regs; + struct ast2600_scu *scu; + struct ast2600_ddr_phy *phy; + void __iomem *phy_setting; + void __iomem *phy_status; + ulong clock_rate; +}; + +static void ast2600_sdramphy_kick_training(struct dram_info *info) +{ + u32 data; + struct ast2600_sdrammc_regs *regs = info->regs; + + writel(SDRAM_PHYCTRL0_NRST, ®s->phy_ctrl[0]); + udelay(5); + writel(SDRAM_PHYCTRL0_NRST | SDRAM_PHYCTRL0_INIT, ®s->phy_ctrl[0]); + udelay(1000); + + while (1) { + data = readl(®s->phy_ctrl[0]) & SDRAM_PHYCTRL0_INIT; + if (~data) + break; + } +} + +/** + * @brief load DDR-PHY configurations table to the PHY registers + * @param[in] p_tbl - pointer to the configuration table + * @param[in] info - pointer to the DRAM info struct + * + * There are two sets of MRS (Mode Registers) configuration in ast2600 memory + * system: one is in the SDRAM MC (memory controller) which is used in run + * time, and the other is in the DDR-PHY IP which is used during DDR-PHY + * training. + */ +static void ast2600_sdramphy_init(u32 *p_tbl, struct dram_info *info) +{ + u32 reg_base = (u32)info->phy_setting; + u32 addr = p_tbl[0]; + u32 data; + int i = 1; + + writel(0, &info->regs->phy_ctrl[0]); + udelay(10); + + while (1) { + if (addr < reg_base) { + debug("invalid DDR-PHY addr: 0x%08x\n", addr); + break; + } + data = p_tbl[i++]; + + if (data == DDR_PHY_TBL_END) { + break; + } else if (data == DDR_PHY_TBL_CHG_ADDR) { + addr = p_tbl[i++]; + } else { + writel(data, addr); + addr += 4; + } + } + + data = readl(info->phy_setting + 0x84) & ~GENMASK(16, 0); + data |= DDR4_PHY_TRAIN_TRFC; + writel(data, info->phy_setting + 0x84); +} + +static int ast2600_sdramphy_check_status(struct dram_info *info) +{ + u32 value, tmp; + u32 reg_base = (u32)info->phy_status; + int need_retrain = 0; + + debug("\nSDRAM PHY training report:\n"); + + /* training status */ + value = readl(reg_base + 0x00); + debug("rO_DDRPHY_reg offset 0x00 = 0x%08x\n", value); + + if (value & BIT(3)) + debug("\tinitial PVT calibration fail\n"); + + if (value & BIT(5)) + debug("\truntime calibration fail\n"); + + /* PU & PD */ + value = readl(reg_base + 0x30); + debug("rO_DDRPHY_reg offset 0x30 = 0x%08x\n", value); + debug(" PU = 0x%02x\n", value & 0xff); + debug(" PD = 0x%02x\n", (value >> 16) & 0xff); + + /* read eye window */ + value = readl(reg_base + 0x68); + if (0 == (value & GENMASK(7, 0))) + need_retrain = 1; + + debug("rO_DDRPHY_reg offset 0x68 = 0x%08x\n", value); + debug(" rising edge of read data eye training pass window\n"); + tmp = (((value & GENMASK(7, 0)) >> 0) * 100) / 255; + debug(" B0:%d%%\n", tmp); + tmp = (((value & GENMASK(15, 8)) >> 8) * 100) / 255; + debug(" B1:%d%%\n", tmp); + + value = readl(reg_base + 0xC8); + debug("rO_DDRPHY_reg offset 0xC8 = 0x%08x\n", value); + debug(" falling edge of read data eye training pass window\n"); + tmp = (((value & GENMASK(7, 0)) >> 0) * 100) / 255; + debug(" B0:%d%%\n", tmp); + tmp = (((value & GENMASK(15, 8)) >> 8) * 100) / 255; + debug(" B1:%d%%\n", tmp); + + /* write eye window */ + value = readl(reg_base + 0x7c); + if (0 == (value & GENMASK(7, 0))) + need_retrain = 1; + + debug("rO_DDRPHY_reg offset 0x7C = 0x%08x\n", value); + debug(" rising edge of write data eye training pass window\n"); + tmp = (((value & GENMASK(7, 0)) >> 0) * 100) / 255; + debug(" B0:%d%%\n", tmp); + tmp = (((value & GENMASK(15, 8)) >> 8) * 100) / 255; + debug(" B1:%d%%\n", tmp); + + /* read Vref training result */ + value = readl(reg_base + 0x88); + debug("rO_DDRPHY_reg offset 0x88 = 0x%08x\n", value); + debug(" read Vref training result\n"); + tmp = (((value & GENMASK(7, 0)) >> 0) * 100) / 127; + debug(" B0:%d%%\n", tmp); + tmp = (((value & GENMASK(15, 8)) >> 8) * 100) / 127; + debug(" B1:%d%%\n", tmp); + + /* write Vref training result */ + value = readl(reg_base + 0x90); + debug("rO_DDRPHY_reg offset 0x90 = 0x%08x\n", value); + + /* gate train */ + value = readl(reg_base + 0x50); + if ((0 == (value & GENMASK(15, 0))) || + (0 == (value & GENMASK(31, 16)))) { + need_retrain = 1; + } + + debug("rO_DDRPHY_reg offset 0x50 = 0x%08x\n", value); + + return need_retrain; +} + +#ifndef CONFIG_ASPEED_BYPASS_SELFTEST +#define MC_TEST_PATTERN_N 8 +static u32 as2600_sdrammc_test_pattern[MC_TEST_PATTERN_N] = { + 0xcc33cc33, 0xff00ff00, 0xaa55aa55, 0x88778877, + 0x92cc4d6e, 0x543d3cde, 0xf1e843c7, 0x7c61d253 }; + +#define TIMEOUT_DRAM 5000000 +int ast2600_sdrammc_dg_test(struct dram_info *info, unsigned int datagen, u32 mode) +{ + unsigned int data; + unsigned int timeout = 0; + struct ast2600_sdrammc_regs *regs = info->regs; + + writel(0, ®s->ecc_test_ctrl); + + if (mode == 0) + writel(0x00000085 | (datagen << 3), ®s->ecc_test_ctrl); + else + writel(0x000000C1 | (datagen << 3), ®s->ecc_test_ctrl); + + do { + data = readl(®s->ecc_test_ctrl) & GENMASK(13, 12); + + if (data & BIT(13)) + return 0; + + if (++timeout > TIMEOUT_DRAM) { + debug("Timeout!!\n"); + writel(0, ®s->ecc_test_ctrl); + return -1; + } + } while (!data); + + writel(0, ®s->ecc_test_ctrl); + + return 0; +} + +int ast2600_sdrammc_cbr_test(struct dram_info *info) +{ + u32 i; + struct ast2600_sdrammc_regs *regs = info->regs; + + clrsetbits_le32(®s->test_addr, GENMASK(30, 4), 0x7ffff0); + + /* single */ + for (i = 0; i < 8; i++) + if (ast2600_sdrammc_dg_test(info, i, 0)) + return -1; + + /* burst */ + for (i = 0; i < 8; i++) + if (ast2600_sdrammc_dg_test(info, i, i)) + return -1; + + return 0; +} + +static int ast2600_sdrammc_test(struct dram_info *info) +{ + struct ast2600_sdrammc_regs *regs = info->regs; + + u32 pass_cnt = 0; + u32 fail_cnt = 0; + u32 target_cnt = 2; + u32 test_cnt = 0; + u32 pattern; + u32 i = 0; + bool finish = false; + + debug("sdram mc test:\n"); + while (!finish) { + pattern = as2600_sdrammc_test_pattern[i++]; + i = i % MC_TEST_PATTERN_N; + debug(" pattern = %08X : ", pattern); + writel(pattern, ®s->test_init_val); + + if (ast2600_sdrammc_cbr_test(info)) { + debug("fail\n"); + fail_cnt++; + } else { + debug("pass\n"); + pass_cnt++; + } + + if (++test_cnt == target_cnt) + finish = true; + } + debug("statistics: pass/fail/total:%d/%d/%d\n", pass_cnt, fail_cnt, + target_cnt); + + return fail_cnt; +} +#endif + +/* + * scu500[14:13] + * 2b'00: VGA memory size = 16MB + * 2b'01: VGA memory size = 16MB + * 2b'10: VGA memory size = 32MB + * 2b'11: VGA memory size = 64MB + * + * mcr04[3:2] + * 2b'00: VGA memory size = 8MB + * 2b'01: VGA memory size = 16MB + * 2b'10: VGA memory size = 32MB + * 2b'11: VGA memory size = 64MB + */ +static size_t ast2600_sdrammc_get_vga_mem_size(struct dram_info *info) +{ + u32 vga_hwconf; + size_t vga_mem_size_base = 8 * 1024 * 1024; + + vga_hwconf = + (readl(&info->scu->hwstrap1) & SCU_HWSTRAP1_VGA_MEM_MASK) >> + SCU_HWSTRAP1_VGA_MEM_SHIFT; + + if (vga_hwconf == 0) { + vga_hwconf = 1; + writel(vga_hwconf << SCU_HWSTRAP1_VGA_MEM_SHIFT, + &info->scu->hwstrap1); + } + + clrsetbits_le32(&info->regs->config, SDRAM_CONF_VGA_SIZE_MASK, + ((vga_hwconf << SDRAM_CONF_VGA_SIZE_SHIFT) & + SDRAM_CONF_VGA_SIZE_MASK)); + + /* no need to reserve VGA memory if efuse[VGA disable] is set */ + if (readl(&info->scu->efuse) & SCU_EFUSE_DIS_VGA) + return 0; + + return vga_mem_size_base << vga_hwconf; +} + +/* + * Find out RAM size and save it in dram_info + * + * The procedure is taken from Aspeed SDK + */ +static void ast2600_sdrammc_calc_size(struct dram_info *info) +{ + /* The controller supports 256/512/1024/2048 MB ram */ + size_t ram_size = SDRAM_MIN_SIZE; + const int write_test_offset = 0x100000; + u32 test_pattern = 0xdeadbeef; + u32 cap_param = SDRAM_CONF_CAP_2048M; + u32 refresh_timing_param = DDR4_TRFC; + const u32 write_addr_base = CONFIG_SYS_SDRAM_BASE + write_test_offset; + + for (ram_size = SDRAM_MAX_SIZE; ram_size > SDRAM_MIN_SIZE; + ram_size >>= 1) { + writel(test_pattern, write_addr_base + (ram_size >> 1)); + test_pattern = (test_pattern >> 4) | (test_pattern << 28); + } + + /* One last write to overwrite all wrapped values */ + writel(test_pattern, write_addr_base); + + /* Reset the pattern and see which value was really written */ + test_pattern = 0xdeadbeef; + for (ram_size = SDRAM_MAX_SIZE; ram_size > SDRAM_MIN_SIZE; + ram_size >>= 1) { + if (readl(write_addr_base + (ram_size >> 1)) == test_pattern) + break; + + --cap_param; + refresh_timing_param >>= 8; + test_pattern = (test_pattern >> 4) | (test_pattern << 28); + } + + clrsetbits_le32(&info->regs->ac_timing[1], + (SDRAM_AC_TRFC_MASK << SDRAM_AC_TRFC_SHIFT), + ((refresh_timing_param & SDRAM_AC_TRFC_MASK) + << SDRAM_AC_TRFC_SHIFT)); + + info->info.base = CONFIG_SYS_SDRAM_BASE; + info->info.size = ram_size - ast2600_sdrammc_get_vga_mem_size(info); + + clrsetbits_le32(&info->regs->config, SDRAM_CONF_CAP_MASK, + ((cap_param << SDRAM_CONF_CAP_SHIFT) & SDRAM_CONF_CAP_MASK)); +} + +static int ast2600_sdrammc_init_ddr4(struct dram_info *info) +{ + const u32 power_ctrl = MCR34_CKE_EN | MCR34_AUTOPWRDN_EN | + MCR34_MREQ_BYPASS_DIS | MCR34_RESETN_DIS | + MCR34_ODT_EN | MCR34_ODT_AUTO_ON | + (0x1 << MCR34_ODT_EXT_SHIFT); + + /* init SDRAM-PHY only on real chip */ + ast2600_sdramphy_init(ast2600_sdramphy_config, info); + writel((MCR34_CKE_EN | MCR34_MREQI_DIS | MCR34_RESETN_DIS), + &info->regs->power_ctrl); + udelay(5); + ast2600_sdramphy_kick_training(info); + udelay(500); + writel(SDRAM_RESET_DLL_ZQCL_EN, &info->regs->refresh_timing); + + writel(MCR30_SET_MR(3), &info->regs->mode_setting_control); + writel(MCR30_SET_MR(6), &info->regs->mode_setting_control); + writel(MCR30_SET_MR(5), &info->regs->mode_setting_control); + writel(MCR30_SET_MR(4), &info->regs->mode_setting_control); + writel(MCR30_SET_MR(2), &info->regs->mode_setting_control); + writel(MCR30_SET_MR(1), &info->regs->mode_setting_control); + writel(MCR30_SET_MR(0) | MCR30_RESET_DLL_DELAY_EN, + &info->regs->mode_setting_control); + + writel(SDRAM_REFRESH_EN | SDRAM_RESET_DLL_ZQCL_EN | + (0x5f << SDRAM_REFRESH_PERIOD_SHIFT), + &info->regs->refresh_timing); + + /* wait self-refresh idle */ + while (readl(&info->regs->power_ctrl) & + MCR34_SELF_REFRESH_STATUS_MASK) + ; + + writel(SDRAM_REFRESH_EN | SDRAM_LOW_PRI_REFRESH_EN | + SDRAM_REFRESH_ZQCS_EN | + (0x5f << SDRAM_REFRESH_PERIOD_SHIFT) | + (0x42aa << SDRAM_REFRESH_PERIOD_ZQCS_SHIFT), + &info->regs->refresh_timing); + + writel(power_ctrl, &info->regs->power_ctrl); + udelay(500); + + return 0; +} + +static void ast2600_sdrammc_unlock(struct dram_info *info) +{ + writel(SDRAM_UNLOCK_KEY, &info->regs->protection_key); + while (!readl(&info->regs->protection_key)) + ; +} + +static void ast2600_sdrammc_lock(struct dram_info *info) +{ + writel(~SDRAM_UNLOCK_KEY, &info->regs->protection_key); + while (readl(&info->regs->protection_key)) + ; +} + +static void ast2600_sdrammc_common_init(struct ast2600_sdrammc_regs *regs) +{ + int i; + + writel(MCR34_MREQI_DIS | MCR34_RESETN_DIS, ®s->power_ctrl); + writel(SDRAM_VIDEO_UNLOCK_KEY, ®s->gm_protection_key); + writel(0x10 << MCR38_RW_MAX_GRANT_CNT_RQ_SHIFT, + ®s->arbitration_ctrl); + writel(0xFFBBFFF4, ®s->req_limit_mask); + + for (i = 0; i < ARRAY_SIZE(ddr_max_grant_params); ++i) + writel(ddr_max_grant_params[i], ®s->max_grant_len[i]); + + writel(MCR50_RESET_ALL_INTR, ®s->intr_ctrl); + + writel(0x07FFFFFF, ®s->ecc_range_ctrl); + + writel(0, ®s->ecc_test_ctrl); + writel(0x80000001, ®s->test_addr); + writel(0, ®s->test_fail_dq_bit); + writel(0, ®s->test_init_val); + + writel(0xFFFFFFFF, ®s->req_input_ctrl); + writel(0, ®s->req_high_pri_ctrl); + + udelay(600); + +#ifdef CONFIG_ASPEED_DDR4_DUALX8 + writel(0x37, ®s->config); +#else + writel(0x17, ®s->config); +#endif + + /* load controller setting */ + for (i = 0; i < ARRAY_SIZE(ddr4_ac_timing); ++i) + writel(ddr4_ac_timing[i], ®s->ac_timing[i]); + + writel(DDR4_MR01_MODE, ®s->mr01_mode_setting); + writel(DDR4_MR23_MODE, ®s->mr23_mode_setting); + writel(DDR4_MR45_MODE, ®s->mr45_mode_setting); + writel(DDR4_MR6_MODE, ®s->mr6_mode_setting); +} + +/* + * Update size info according to the ECC HW setting + * + * Assume SDRAM has been initialized by SPL or the host. To get the RAM size, we + * don't need to calculate the ECC size again but read from MCR04 and derive the + * size from its value. + */ +static void ast2600_sdrammc_update_size(struct dram_info *info) +{ + struct ast2600_sdrammc_regs *regs = info->regs; + u32 conf = readl(®s->config); + u32 cap_param; + size_t ram_size = SDRAM_MAX_SIZE; + size_t hw_size; + + cap_param = (conf & SDRAM_CONF_CAP_MASK) >> SDRAM_CONF_CAP_SHIFT; + switch (cap_param) { + case SDRAM_CONF_CAP_2048M: + ram_size = 2048 * SDRAM_SIZE_1MB; + break; + case SDRAM_CONF_CAP_1024M: + ram_size = 1024 * SDRAM_SIZE_1MB; + break; + case SDRAM_CONF_CAP_512M: + ram_size = 512 * SDRAM_SIZE_1MB; + break; + case SDRAM_CONF_CAP_256M: + ram_size = 256 * SDRAM_SIZE_1MB; + break; + } + + info->info.base = CONFIG_SYS_SDRAM_BASE; + info->info.size = ram_size - ast2600_sdrammc_get_vga_mem_size(info); + + if (0 == (conf & SDRAM_CONF_ECC_SETUP)) + return; + + hw_size = readl(®s->ecc_range_ctrl) & SDRAM_ECC_RANGE_ADDR_MASK; + hw_size += (1 << SDRAM_ECC_RANGE_ADDR_SHIFT); + + info->info.size = hw_size; +} + +#ifdef CONFIG_ASPEED_ECC +static void ast2600_sdrammc_ecc_enable(struct dram_info *info) +{ + struct ast2600_sdrammc_regs *regs = info->regs; + size_t conf_size; + u32 reg; + + conf_size = CONFIG_ASPEED_ECC_SIZE * SDRAM_SIZE_1MB; + if (conf_size > info->info.size) { + printf("warning: ECC configured %dMB but actual size is %dMB\n", + CONFIG_ASPEED_ECC_SIZE, + info->info.size / SDRAM_SIZE_1MB); + conf_size = info->info.size; + } else if (conf_size == 0) { + conf_size = info->info.size; + } + + info->info.size = (((conf_size / 9) * 8) >> 20) << 20; + writel(((info->info.size >> 20) - 1) << 20, ®s->ecc_range_ctrl); + reg = readl(®s->config) | SDRAM_CONF_ECC_SETUP; + writel(reg, ®s->config); + + writel(0, ®s->test_init_val); + writel(0x80000001, ®s->test_addr); + writel(0x221, ®s->ecc_test_ctrl); + while (0 == (readl(®s->ecc_test_ctrl) & BIT(12))) + ; + writel(0, ®s->ecc_test_ctrl); + writel(BIT(31), ®s->intr_ctrl); + writel(0, ®s->intr_ctrl); +} +#endif + +static int ast2600_sdrammc_probe(struct udevice *dev) +{ + int ret; + u32 reg; + struct dram_info *priv = (struct dram_info *)dev_get_priv(dev); + struct ast2600_sdrammc_regs *regs = priv->regs; + struct udevice *clk_dev; + + /* find SCU base address from clock device */ + ret = uclass_get_device_by_driver(UCLASS_CLK, + DM_DRIVER_GET(aspeed_ast2600_scu), &clk_dev); + if (ret) { + debug("clock device not defined\n"); + return ret; + } + + priv->scu = devfdt_get_addr_ptr(clk_dev); + if (IS_ERR(priv->scu)) { + debug("%s(): can't get SCU\n", __func__); + return PTR_ERR(priv->scu); + } + + if (readl(&priv->scu->dram_hdshk) & SCU_DRAM_HDSHK_RDY) { + printf("already initialized, "); + ast2600_sdrammc_update_size(priv); + return 0; + } + + reg = readl(&priv->scu->mpll); + reg &= ~(SCU_PLL_BYPASS | SCU_PLL_DIV_MASK | + SCU_PLL_DENUM_MASK | SCU_PLL_NUM_MASK); + reg |= (SCU_PLL_RST | SCU_PLL_OFF | SCU_MPLL_FREQ_CFG); + writel(reg, &priv->scu->mpll); + writel(SCU_MPLL_EXT_CFG, &priv->scu->mpll_ext); + udelay(100); + reg &= ~(SCU_PLL_RST | SCU_PLL_OFF); + writel(reg, &priv->scu->mpll); + + while ((readl(&priv->scu->mpll_ext) & BIT(31)) == 0) + ; + + ast2600_sdrammc_unlock(priv); + ast2600_sdrammc_common_init(regs); +L_ast2600_sdramphy_train: + ast2600_sdrammc_init_ddr4(priv); + + /* make sure DDR-PHY is ready before access */ + do { + reg = readl(priv->phy_status) & BIT(1); + } while (reg == 0); + + if (ast2600_sdramphy_check_status(priv) != 0) { + printf("DDR4 PHY training fail, retrain\n"); + goto L_ast2600_sdramphy_train; + } + + ast2600_sdrammc_calc_size(priv); + +#ifndef CONFIG_ASPEED_BYPASS_SELFTEST + if (ast2600_sdrammc_test(priv) != 0) { + printf("%s: DDR4 init fail\n", __func__); + return -EINVAL; + } +#endif + +#ifdef CONFIG_ASPEED_ECC + ast2600_sdrammc_ecc_enable(priv); +#endif + + writel(readl(&priv->scu->dram_hdshk) | SCU_DRAM_HDSHK_RDY, + &priv->scu->dram_hdshk); + + clrbits_le32(®s->intr_ctrl, MCR50_RESET_ALL_INTR); + ast2600_sdrammc_lock(priv); + return 0; +} + +static int ast2600_sdrammc_of_to_plat(struct udevice *dev) +{ + struct dram_info *priv = dev_get_priv(dev); + + priv->regs = (void *)(uintptr_t)devfdt_get_addr_index(dev, 0); + priv->phy_setting = (void *)(uintptr_t)devfdt_get_addr_index(dev, 1); + priv->phy_status = (void *)(uintptr_t)devfdt_get_addr_index(dev, 2); + + priv->clock_rate = fdtdec_get_int(gd->fdt_blob, dev_of_offset(dev), + "clock-frequency", 0); + if (!priv->clock_rate) { + debug("DDR Clock Rate not defined\n"); + return -EINVAL; + } + + return 0; +} + +static int ast2600_sdrammc_get_info(struct udevice *dev, struct ram_info *info) +{ + struct dram_info *priv = dev_get_priv(dev); + + *info = priv->info; + + return 0; +} + +static struct ram_ops ast2600_sdrammc_ops = { + .get_info = ast2600_sdrammc_get_info, +}; + +static const struct udevice_id ast2600_sdrammc_ids[] = { + { .compatible = "aspeed,ast2600-sdrammc" }, + { } +}; + +U_BOOT_DRIVER(sdrammc_ast2600) = { + .name = "aspeed_ast2600_sdrammc", + .id = UCLASS_RAM, + .of_match = ast2600_sdrammc_ids, + .ops = &ast2600_sdrammc_ops, + .of_to_plat = ast2600_sdrammc_of_to_plat, + .probe = ast2600_sdrammc_probe, + .priv_auto = sizeof(struct dram_info), +};