From: Mathew McBride Date: Wed, 12 Apr 2023 07:38:27 +0000 (+0000) Subject: arm: dts: fsl-ls1088a: move and sync existing bindings to be under /soc X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=fd4f7b0158d0220cf902a37e13db6eee299ed8cc;p=u-boot.git arm: dts: fsl-ls1088a: move and sync existing bindings to be under /soc Our [U-Boot] copy of fsl-ls1088a.dtsi had all the hardware under the top level, until the DM_SERIAL implementation recently. In this commit, remove any remaining devices (that were in U-Boot, but not touched by previous patches in this series) to be under /soc, updating to their upstream (Linux) bindings. The bindings have been copied closest to their relative positions in the Linux version, so the eventual result is that the U-Boot and Linux fsl-ls1088a.dtsi will be identical. The next commit will add the hardware bindings that were not in U-Boot. Signed-off-by: Mathew McBride Reviewed-by: Peng Fan Signed-off-by: Peng Fan Reviewed-by: Ioana Ciornei Tested-by: Ioana Ciornei # on LS1088A-RDB --- diff --git a/arch/arm/dts/fsl-ls1088a.dtsi b/arch/arm/dts/fsl-ls1088a.dtsi index 8321b73f30..d5822520fb 100644 --- a/arch/arm/dts/fsl-ls1088a.dtsi +++ b/arch/arm/dts/fsl-ls1088a.dtsi @@ -159,6 +159,20 @@ status = "disabled"; }; + dspi: spi@2100000 { + compatible = "fsl,ls1088a-dspi", + "fsl,ls1021a-v1.0-dspi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x2100000 0x0 0x10000>; + interrupts = ; + clock-names = "dspi"; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(2)>; + spi-num-chipselects = <6>; + status = "disabled"; + }; + duart1: serial@21c0600 { compatible = "fsl,ns16550", "ns16550a"; reg = <0x0 0x21c0600 0x0 0x100>; @@ -212,6 +226,16 @@ #interrupt-cells = <2>; }; + ifc: memory-controller@2240000 { + compatible = "fsl,ifc"; + reg = <0x0 0x2240000 0x0 0x20000>; + interrupts = <0 21 IRQ_TYPE_LEVEL_HIGH>; + little-endian; + #address-cells = <2>; + #size-cells = <1>; + status = "disabled"; + }; + i2c0: i2c@2000000 { compatible = "fsl,vf610-i2c"; #address-cells = <1>; @@ -256,6 +280,35 @@ status = "disabled"; }; + qspi: spi@20c0000 { + compatible = "fsl,ls2080a-qspi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x20c0000 0x0 0x10000>, + <0x0 0x20000000 0x0 0x10000000>; + reg-names = "QuadSPI", "QuadSPI-memory"; + interrupts = ; + clock-names = "qspi_en", "qspi"; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>, + <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>; + status = "disabled"; + }; + + esdhc: esdhc@2140000 { + compatible = "fsl,ls1088a-esdhc", "fsl,esdhc"; + reg = <0x0 0x2140000 0x0 0x10000>; + interrupts = <0 28 0x4>; /* Level high type */ + clock-frequency = <0>; + clocks = <&clockgen QORIQ_CLK_HWACCEL 1>; + voltage-ranges = <1800 1800 3300 3300>; + sdhci,auto-cmd12; + little-endian; + bus-width = <4>; + status = "disabled"; + }; + usb0: usb@3100000 { compatible = "snps,dwc3"; reg = <0x0 0x3100000 0x0 0x10000>; @@ -278,6 +331,57 @@ status = "disabled"; }; + sata: sata@3200000 { + compatible = "fsl,ls1088a-ahci"; + reg = <0x0 0x3200000 0x0 0x10000>, + <0x7 0x100520 0x0 0x4>; + reg-names = "ahci", "sata-ecc"; + interrupts = <0 133 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL + QORIQ_CLK_PLL_DIV(4)>; + dma-coherent; + status = "disabled"; + }; + + crypto: crypto@8000000 { + compatible = "fsl,sec-v5.0", "fsl,sec-v4.0"; + fsl,sec-era = <8>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x00 0x8000000 0x100000>; + reg = <0x00 0x8000000 0x0 0x100000>; + interrupts = ; + dma-coherent; + + sec_jr0: jr@10000 { + compatible = "fsl,sec-v5.0-job-ring", + "fsl,sec-v4.0-job-ring"; + reg = <0x10000 0x10000>; + interrupts = ; + }; + + sec_jr1: jr@20000 { + compatible = "fsl,sec-v5.0-job-ring", + "fsl,sec-v4.0-job-ring"; + reg = <0x20000 0x10000>; + interrupts = ; + }; + + sec_jr2: jr@30000 { + compatible = "fsl,sec-v5.0-job-ring", + "fsl,sec-v4.0-job-ring"; + reg = <0x30000 0x10000>; + interrupts = ; + }; + + sec_jr3: jr@40000 { + compatible = "fsl,sec-v5.0-job-ring", + "fsl,sec-v4.0-job-ring"; + reg = <0x40000 0x10000>; + interrupts = ; + }; + }; + pcie1: pcie@3400000 { compatible = "fsl,ls1088a-pcie"; reg = <0x00 0x03400000 0x0 0x00100000>, /* controller registers */ @@ -652,87 +756,6 @@ }; }; - dspi: dspi@2100000 { - compatible = "fsl,vf610-dspi"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x0 0x2100000 0x0 0x10000>; - interrupts = <0 26 0x4>; /* Level high type */ - spi-num-chipselects = <6>; - }; - - qspi: quadspi@1550000 { - compatible = "fsl,ls1088a-qspi"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x0 0x20c0000 0x0 0x10000>, - <0x0 0x20000000 0x0 0x10000000>; - reg-names = "QuadSPI", "QuadSPI-memory"; - status = "disabled"; - }; - - esdhc: esdhc@2140000 { - compatible = "fsl,esdhc"; - reg = <0x0 0x2140000 0x0 0x10000>; - interrupts = <0 28 0x4>; /* Level high type */ - little-endian; - bus-width = <4>; - }; - - ifc: ifc@1530000 { - compatible = "fsl,ifc", "simple-bus"; - reg = <0x0 0x2240000 0x0 0x20000>; - interrupts = <0 21 0x4>; /* Level high type */ - }; - - crypto: crypto@8000000 { - compatible = "fsl,sec-v5.0", "fsl,sec-v4.0"; - fsl,sec-era = <8>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x0 0x00 0x8000000 0x100000>; - reg = <0x00 0x8000000 0x0 0x100000>; - interrupts = ; - dma-coherent; - - sec_jr0: jr@10000 { - compatible = "fsl,sec-v5.0-job-ring", - "fsl,sec-v4.0-job-ring"; - reg = <0x10000 0x10000>; - interrupts = ; - }; - - sec_jr1: jr@20000 { - compatible = "fsl,sec-v5.0-job-ring", - "fsl,sec-v4.0-job-ring"; - reg = <0x20000 0x10000>; - interrupts = ; - }; - - sec_jr2: jr@30000 { - compatible = "fsl,sec-v5.0-job-ring", - "fsl,sec-v4.0-job-ring"; - reg = <0x30000 0x10000>; - interrupts = ; - }; - - sec_jr3: jr@40000 { - compatible = "fsl,sec-v5.0-job-ring", - "fsl,sec-v4.0-job-ring"; - reg = <0x40000 0x10000>; - interrupts = ; - }; - }; - - sata: sata@3200000 { - compatible = "fsl,ls1088a-ahci"; - reg = <0x0 0x3200000 0x0 0x10000 /* ccsr sata base */ - 0x7 0x100520 0x0 0x4>; /* ecc sata addr*/ - reg-names = "ahci", "sata-ecc"; - interrupts = <0 133 4>; - status = "disabled"; - }; - psci { compatible = "arm,psci-0.2"; method = "smc";