From: Simon Glass Date: Wed, 17 May 2017 09:25:30 +0000 (-0600) Subject: Kconfig: Add a CONFIG_IDE option X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=fc843a02acad62e231a3e779cebd1712688146fc;p=u-boot.git Kconfig: Add a CONFIG_IDE option At present IDE support is controlled by CONFIG_CMD_IDE. Add a separate CONFIG_IDE option so that IDE support can be enabled without requiring the 'ide' command. Update existing users and move the ide driver into drivers/block since it should not be in common/. Signed-off-by: Simon Glass --- diff --git a/README b/README index ddad5ee4ed..85d40e7630 100644 --- a/README +++ b/README @@ -1081,7 +1081,7 @@ The following options need to be configured: disk/part_efi.c CONFIG_MTD_PARTITIONS Memory Technology Device partition table. - If IDE or SCSI support is enabled (CONFIG_CMD_IDE or + If IDE or SCSI support is enabled (CONFIG_IDE or CONFIG_SCSI) you must configure support for at least one non-MTD partition type as well. diff --git a/api/api_storage.c b/api/api_storage.c index a5357bc9cf..f858f09f1a 100644 --- a/api/api_storage.c +++ b/api/api_storage.c @@ -46,7 +46,7 @@ static struct stor_spec specs[ENUM_MAX] = { { 0, 0, 0, 0, NULL }, }; void dev_stor_init(void) { -#if defined(CONFIG_CMD_IDE) +#if defined(CONFIG_IDE) specs[ENUM_IDE].max_dev = CONFIG_SYS_IDE_MAXDEVICE; specs[ENUM_IDE].enum_started = 0; specs[ENUM_IDE].enum_ended = 0; diff --git a/arch/arm/mach-kirkwood/include/mach/config.h b/arch/arm/mach-kirkwood/include/mach/config.h index c7beb58e80..ba6007186e 100644 --- a/arch/arm/mach-kirkwood/include/mach/config.h +++ b/arch/arm/mach-kirkwood/include/mach/config.h @@ -95,7 +95,7 @@ /* * IDE Support on SATA ports */ -#ifdef CONFIG_CMD_IDE +#ifdef CONFIG_IDE #define __io #define CONFIG_MVSATA_IDE #define CONFIG_IDE_PREINIT @@ -110,12 +110,12 @@ #define CONFIG_SYS_ATA_STRIDE 4 /* Controller supports 48-bits LBA addressing */ #define CONFIG_LBA48 -/* CONFIG_CMD_IDE requires some #defines for ATA registers */ +/* CONFIG_IDE requires some #defines for ATA registers */ #define CONFIG_SYS_IDE_MAXBUS 2 #define CONFIG_SYS_IDE_MAXDEVICE 2 /* ATA registers base is at SATA controller base */ #define CONFIG_SYS_ATA_BASE_ADDR MV_SATA_BASE -#endif /* CONFIG_CMD_IDE */ +#endif /* CONFIG_IDE */ /* * I2C related stuff diff --git a/arch/powerpc/cpu/mpc5xxx/ide.c b/arch/powerpc/cpu/mpc5xxx/ide.c index 9003b774ff..d1f4349184 100644 --- a/arch/powerpc/cpu/mpc5xxx/ide.c +++ b/arch/powerpc/cpu/mpc5xxx/ide.c @@ -8,7 +8,7 @@ */ #include -#if defined(CONFIG_CMD_IDE) +#if defined(CONFIG_IDE) #include DECLARE_GLOBAL_DATA_PTR; diff --git a/arch/powerpc/lib/Makefile b/arch/powerpc/lib/Makefile index 4f68613a41..88adb26e2e 100644 --- a/arch/powerpc/lib/Makefile +++ b/arch/powerpc/lib/Makefile @@ -35,7 +35,7 @@ obj-y += cache.o obj-y += extable.o obj-y += interrupts.o obj-$(CONFIG_CMD_KGDB) += kgdb.o -obj-$(CONFIG_CMD_IDE) += ide.o +obj-$(CONFIG_IDE) += ide.o obj-y += stack.o obj-y += time.o diff --git a/board/freescale/m5253demo/m5253demo.c b/board/freescale/m5253demo/m5253demo.c index c2cc2d76e4..3318368623 100644 --- a/board/freescale/m5253demo/m5253demo.c +++ b/board/freescale/m5253demo/m5253demo.c @@ -88,7 +88,7 @@ int testdram(void) return (0); } -#ifdef CONFIG_CMD_IDE +#ifdef CONFIG_IDE #include int ide_preinit(void) { @@ -133,7 +133,7 @@ void ide_set_reset(int idereset) setbits_8(&ata->cr, 0x01); } } -#endif /* CONFIG_CMD_IDE */ +#endif /* CONFIG_IDE */ #ifdef CONFIG_DRIVER_DM9000 diff --git a/board/freescale/m5253evbe/m5253evbe.c b/board/freescale/m5253evbe/m5253evbe.c index c1ed431190..2c6afadb9a 100644 --- a/board/freescale/m5253evbe/m5253evbe.c +++ b/board/freescale/m5253evbe/m5253evbe.c @@ -81,7 +81,7 @@ int testdram(void) return (0); } -#ifdef CONFIG_CMD_IDE +#ifdef CONFIG_IDE #include int ide_preinit(void) { @@ -126,4 +126,4 @@ void ide_set_reset(int idereset) setbits_8(&ata->cr, 0x01); } } -#endif /* CONFIG_CMD_IDE */ +#endif /* CONFIG_IDE */ diff --git a/board/freescale/m54455evb/m54455evb.c b/board/freescale/m54455evb/m54455evb.c index d6b0650b99..1e35970023 100644 --- a/board/freescale/m54455evb/m54455evb.c +++ b/board/freescale/m54455evb/m54455evb.c @@ -88,7 +88,7 @@ int testdram(void) return (0); } -#if defined(CONFIG_CMD_IDE) +#if defined(CONFIG_IDE) #include int ide_preinit(void) diff --git a/board/intercontrol/digsy_mtc/digsy_mtc.c b/board/intercontrol/digsy_mtc/digsy_mtc.c index b8bc0459f8..6c33eeb022 100644 --- a/board/intercontrol/digsy_mtc/digsy_mtc.c +++ b/board/intercontrol/digsy_mtc/digsy_mtc.c @@ -325,7 +325,7 @@ void pci_init_board(void) } #endif -#ifdef CONFIG_CMD_IDE +#ifdef CONFIG_IDE #ifdef CONFIG_IDE_RESET @@ -369,7 +369,7 @@ void ide_set_reset(int idereset) setbits_be32((void *)MPC5XXX_WU_GPIO_ENABLE, (1 << 25)); } #endif /* CONFIG_IDE_RESET */ -#endif /* CONFIG_CMD_IDE */ +#endif /* CONFIG_IDE */ #ifdef CONFIG_OF_BOARD_SETUP static void ft_delete_node(void *fdt, const char *compat) diff --git a/board/jupiter/jupiter.c b/board/jupiter/jupiter.c index ea24eaa5c0..52d2766e9a 100644 --- a/board/jupiter/jupiter.c +++ b/board/jupiter/jupiter.c @@ -259,7 +259,7 @@ void pci_init_board(void) } #endif -#if defined(CONFIG_CMD_IDE) && defined(CONFIG_IDE_RESET) +#if defined(CONFIG_IDE) && defined(CONFIG_IDE_RESET) void init_ide_reset (void) { diff --git a/board/phytec/pcm030/pcm030.c b/board/phytec/pcm030/pcm030.c index 983559e81e..bdd980da91 100644 --- a/board/phytec/pcm030/pcm030.c +++ b/board/phytec/pcm030/pcm030.c @@ -176,7 +176,7 @@ int ft_board_setup(void *blob, bd_t *bd) } #endif /* CONFIG_OF_BOARD_SETUP */ -#if defined(CONFIG_CMD_IDE) && defined(CONFIG_IDE_RESET) +#if defined(CONFIG_IDE) && defined(CONFIG_IDE_RESET) #define GPIO_PSC2_4 0x02000000UL @@ -206,4 +206,4 @@ void ide_set_reset(int idereset) } else setbits_be32(&wu_gpio->dvo, GPIO_PSC2_4); } -#endif /* defined(CONFIG_CMD_IDE) && defined(CONFIG_IDE_RESET) */ +#endif /* defined(CONFIG_IDE) && defined(CONFIG_IDE_RESET) */ diff --git a/board/tqc/tqm5200/tqm5200.c b/board/tqc/tqm5200/tqm5200.c index c48ab11fc4..cb99afdb90 100644 --- a/board/tqc/tqm5200/tqm5200.c +++ b/board/tqc/tqm5200/tqm5200.c @@ -312,7 +312,7 @@ void pci_init_board(void) } #endif -#if defined(CONFIG_CMD_IDE) && defined(CONFIG_IDE_RESET) +#if defined(CONFIG_IDE) && defined(CONFIG_IDE_RESET) #if defined (CONFIG_MINIFAP) #define SM501_POWER_MODE0_GATE 0x00000040UL diff --git a/board/v38b/v38b.c b/board/v38b/v38b.c index 73227c1b15..e680b7b8ff 100644 --- a/board/v38b/v38b.c +++ b/board/v38b/v38b.c @@ -224,7 +224,7 @@ int misc_init_r(void) return 0; } -#if defined(CONFIG_CMD_IDE) && defined(CONFIG_IDE_RESET) +#if defined(CONFIG_IDE) && defined(CONFIG_IDE_RESET) void init_ide_reset(void) { debug("init_ide_reset\n"); diff --git a/cmd/Kconfig b/cmd/Kconfig index 2c89a773d0..1268e38b59 100644 --- a/cmd/Kconfig +++ b/cmd/Kconfig @@ -486,6 +486,7 @@ config CMD_DEMO config CMD_IDE bool "ide - Support for IDE drivers" + select IDE help Provides an 'ide' command which allows accessing the IDE drive, reseting the IDE interface, printing the partition table and diff --git a/cmd/pcmcia.c b/cmd/pcmcia.c index 682d18f55d..044fb9e618 100644 --- a/cmd/pcmcia.c +++ b/cmd/pcmcia.c @@ -83,7 +83,7 @@ U_BOOT_CMD( #undef CHECK_IDE_DEVICE -#if defined(CONFIG_CMD_IDE) && defined(CONFIG_IDE_8xx_PCCARD) +#if defined(CONFIG_IDE) && defined(CONFIG_IDE_8xx_PCCARD) #define CHECK_IDE_DEVICE #endif diff --git a/common/Makefile b/common/Makefile index b2d663530d..c7c8ea42c6 100644 --- a/common/Makefile +++ b/common/Makefile @@ -145,7 +145,6 @@ obj-y += dlmalloc.o ifdef CONFIG_SYS_MALLOC_F_LEN obj-y += malloc_simple.o endif -obj-$(CONFIG_CMD_IDE) += ide.o obj-y += image.o obj-$(CONFIG_ANDROID_BOOT_IMAGE) += image-android.o obj-$(CONFIG_$(SPL_)OF_LIBFDT) += image-fdt.o diff --git a/common/board_r.c b/common/board_r.c index 28f32c3885..fe7a70b589 100644 --- a/common/board_r.c +++ b/common/board_r.c @@ -23,9 +23,7 @@ #include #include #include -#if defined(CONFIG_CMD_IDE) #include -#endif #include #include #ifdef CONFIG_PS2KBD @@ -611,7 +609,7 @@ static int initr_post(void) } #endif -#if defined(CONFIG_CMD_PCMCIA) && !defined(CONFIG_CMD_IDE) +#if defined(CONFIG_CMD_PCMCIA) && !defined(CONFIG_IDE) static int initr_pcmcia(void) { puts("PCMCIA:"); @@ -620,7 +618,7 @@ static int initr_pcmcia(void) } #endif -#if defined(CONFIG_CMD_IDE) +#if defined(CONFIG_IDE) static int initr_ide(void) { #ifdef CONFIG_IDE_8xx_PCCARD @@ -870,10 +868,10 @@ static init_fnc_t init_sequence_r[] = { #ifdef CONFIG_POST initr_post, #endif -#if defined(CONFIG_CMD_PCMCIA) && !defined(CONFIG_CMD_IDE) +#if defined(CONFIG_CMD_PCMCIA) && !defined(CONFIG_IDE) initr_pcmcia, #endif -#if defined(CONFIG_CMD_IDE) +#if defined(CONFIG_IDE) initr_ide, #endif #ifdef CONFIG_LAST_STAGE_INIT diff --git a/drivers/block/Kconfig b/drivers/block/Kconfig index 6cbe1454b8..931defd2ae 100644 --- a/drivers/block/Kconfig +++ b/drivers/block/Kconfig @@ -59,3 +59,11 @@ config DWC_AHCI Synopsys DWC AHCI module. endmenu + +config IDE + bool "Support IDE controllers" + help + Enables support for IDE (Integrated Drive Electronics) hard drives. + This allows access to raw blocks and filesystems on an IDE drive + from U-Boot. See also CMD_IDE which provides an 'ide' command for + performing various IDE operations. diff --git a/drivers/block/Makefile b/drivers/block/Makefile index d89c8b0574..06450966b1 100644 --- a/drivers/block/Makefile +++ b/drivers/block/Makefile @@ -17,6 +17,7 @@ obj-$(CONFIG_DM_SCSI) += scsi-uclass.o obj-$(CONFIG_SCSI_AHCI) += ahci.o obj-$(CONFIG_DWC_AHSATA) += dwc_ahsata.o obj-$(CONFIG_FSL_SATA) += fsl_sata.o +obj-$(CONFIG_IDE) += ide.o obj-$(CONFIG_IDE_FTIDE020) += ftide020.o obj-$(CONFIG_LIBATA) += libata.o obj-$(CONFIG_MVSATA_IDE) += mvsata_ide.o diff --git a/common/ide.c b/drivers/block/ide.c similarity index 100% rename from common/ide.c rename to drivers/block/ide.c diff --git a/drivers/block/sil680.c b/drivers/block/sil680.c index 3ca64b980d..b1db257838 100644 --- a/drivers/block/sil680.c +++ b/drivers/block/sil680.c @@ -17,7 +17,7 @@ * incorrect for the target board (e.g. the sequoia board requires 0). * #define CONFIG_SYS_PCI_CACHE_LINE_SIZE 0 * - * #define CONFIG_CMD_IDE + * #define CONFIG_IDE * #undef CONFIG_IDE_8xx_DIRECT * #undef CONFIG_IDE_LED * #undef CONFIG_IDE_RESET diff --git a/drivers/pcmcia/marubun_pcmcia.c b/drivers/pcmcia/marubun_pcmcia.c index afd6df6440..739d7545da 100644 --- a/drivers/pcmcia/marubun_pcmcia.c +++ b/drivers/pcmcia/marubun_pcmcia.c @@ -17,7 +17,7 @@ #define CONFIG_PCMCIA #endif -#if defined(CONFIG_CMD_IDE) +#if defined(CONFIG_IDE) #define CONFIG_PCMCIA #endif diff --git a/drivers/pcmcia/mpc8xx_pcmcia.c b/drivers/pcmcia/mpc8xx_pcmcia.c index 1b41e39158..dae5560f8c 100644 --- a/drivers/pcmcia/mpc8xx_pcmcia.c +++ b/drivers/pcmcia/mpc8xx_pcmcia.c @@ -9,7 +9,7 @@ #define CONFIG_PCMCIA #endif -#if defined(CONFIG_CMD_IDE) && defined(CONFIG_IDE_8xx_PCCARD) +#if defined(CONFIG_IDE) && defined(CONFIG_IDE_8xx_PCCARD) #define CONFIG_PCMCIA #endif diff --git a/drivers/pcmcia/tqm8xx_pcmcia.c b/drivers/pcmcia/tqm8xx_pcmcia.c index 45dcb54d71..edff50f630 100644 --- a/drivers/pcmcia/tqm8xx_pcmcia.c +++ b/drivers/pcmcia/tqm8xx_pcmcia.c @@ -15,7 +15,7 @@ #define CONFIG_PCMCIA #endif -#if defined(CONFIG_CMD_IDE) && defined(CONFIG_IDE_8xx_PCCARD) +#if defined(CONFIG_IDE) && defined(CONFIG_IDE_8xx_PCCARD) #define CONFIG_PCMCIA #endif diff --git a/fs/fat/fat.c b/fs/fat/fat.c index 56540031d6..a71bad1cbc 100644 --- a/fs/fat/fat.c +++ b/fs/fat/fat.c @@ -1250,7 +1250,7 @@ int file_fat_detectfs(void) return 1; } -#if defined(CONFIG_CMD_IDE) || \ +#if defined(CONFIG_IDE) || \ defined(CONFIG_CMD_SATA) || \ defined(CONFIG_SCSI) || \ defined(CONFIG_CMD_USB) || \ diff --git a/include/config_distro_bootcmd.h b/include/config_distro_bootcmd.h index 0e01e8240d..4b2c493ae3 100644 --- a/include/config_distro_bootcmd.h +++ b/include/config_distro_bootcmd.h @@ -186,16 +186,16 @@ BOOT_TARGET_DEVICES_references_SCSI_without_CONFIG_SCSI #endif -#ifdef CONFIG_CMD_IDE +#ifdef CONFIG_IDE #define BOOTENV_SHARED_IDE BOOTENV_SHARED_BLKDEV(ide) #define BOOTENV_DEV_IDE BOOTENV_DEV_BLKDEV #define BOOTENV_DEV_NAME_IDE BOOTENV_DEV_NAME_BLKDEV #else #define BOOTENV_SHARED_IDE #define BOOTENV_DEV_IDE \ - BOOT_TARGET_DEVICES_references_IDE_without_CONFIG_CMD_IDE + BOOT_TARGET_DEVICES_references_IDE_without_CONFIG_IDE #define BOOTENV_DEV_NAME_IDE \ - BOOT_TARGET_DEVICES_references_IDE_without_CONFIG_CMD_IDE + BOOT_TARGET_DEVICES_references_IDE_without_CONFIG_IDE #endif #if defined(CONFIG_CMD_PCI_ENUM) || defined(CONFIG_DM_PCI) diff --git a/include/config_fallbacks.h b/include/config_fallbacks.h index 7aa5b02396..5a698a8349 100644 --- a/include/config_fallbacks.h +++ b/include/config_fallbacks.h @@ -43,7 +43,7 @@ #endif /* Rather than repeat this expression each time, add a define for it */ -#if defined(CONFIG_CMD_IDE) || \ +#if defined(CONFIG_IDE) || \ defined(CONFIG_CMD_SATA) || \ defined(CONFIG_SCSI) || \ defined(CONFIG_CMD_USB) || \ diff --git a/include/configs/M5253DEMO.h b/include/configs/M5253DEMO.h index e7c6f8b558..3efd7e59cf 100644 --- a/include/configs/M5253DEMO.h +++ b/include/configs/M5253DEMO.h @@ -38,7 +38,7 @@ * Command line configuration. */ -#ifdef CONFIG_CMD_IDE +#ifdef CONFIG_IDE /* ATA */ # define CONFIG_IDE_RESET 1 # define CONFIG_IDE_PREINIT 1 diff --git a/include/configs/edminiv2.h b/include/configs/edminiv2.h index e7627f7278..cc5cc7bac6 100644 --- a/include/configs/edminiv2.h +++ b/include/configs/edminiv2.h @@ -139,7 +139,7 @@ /* * IDE */ -#ifdef CONFIG_CMD_IDE +#ifdef CONFIG_IDE #define __io #define CONFIG_IDE_PREINIT /* ED Mini V has an IDE-compatible SATA connector for port 1 */ diff --git a/include/configs/ib62x0.h b/include/configs/ib62x0.h index 36a66bb463..0b92d7b2ca 100644 --- a/include/configs/ib62x0.h +++ b/include/configs/ib62x0.h @@ -87,14 +87,14 @@ /* * SATA driver configuration */ -#ifdef CONFIG_CMD_IDE +#ifdef CONFIG_IDE #define __io #define CONFIG_IDE_PREINIT #define CONFIG_MVSATA_IDE_USE_PORT0 #define CONFIG_MVSATA_IDE_USE_PORT1 #define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET #define CONFIG_SYS_ATA_IDE1_OFFSET MV_SATA_PORT1_OFFSET -#endif /* CONFIG_CMD_IDE */ +#endif /* CONFIG_IDE */ /* * RTC driver configuration diff --git a/include/configs/lsxl.h b/include/configs/lsxl.h index d2c210119b..43e4a325b4 100644 --- a/include/configs/lsxl.h +++ b/include/configs/lsxl.h @@ -145,7 +145,7 @@ #undef CONFIG_RESET_PHY_R #endif /* CONFIG_CMD_NET */ -#ifdef CONFIG_CMD_IDE +#ifdef CONFIG_IDE #undef CONFIG_IDE_LED #undef CONFIG_SYS_IDE_MAXBUS #define CONFIG_SYS_IDE_MAXBUS 1 diff --git a/include/configs/mpc5121ads.h b/include/configs/mpc5121ads.h index 14cf2e8cb9..5c9a2d939b 100644 --- a/include/configs/mpc5121ads.h +++ b/include/configs/mpc5121ads.h @@ -411,10 +411,10 @@ "1m(u-boot);" \ "mpc5121.nand:-(data)" -#if defined(CONFIG_CMD_IDE) || defined(CONFIG_CMD_EXT2) || defined(CONFIG_CMD_USB) +#if defined(CONFIG_IDE) || defined(CONFIG_CMD_EXT2) || defined(CONFIG_CMD_USB) #define CONFIG_SUPPORT_VFAT -#endif /* defined(CONFIG_CMD_IDE) */ +#endif /* defined(CONFIG_IDE) */ /* * Watchdog timeout = CONFIG_SYS_WATCHDOG_VALUE * 65536 / IPS clock. diff --git a/include/configs/nsa310s.h b/include/configs/nsa310s.h index b988d3d7f9..9b99b0e44f 100644 --- a/include/configs/nsa310s.h +++ b/include/configs/nsa310s.h @@ -79,12 +79,12 @@ #endif /* CONFIG_CMD_NET */ /* SATA driver configuration */ -#ifdef CONFIG_CMD_IDE +#ifdef CONFIG_IDE #define __io #define CONFIG_IDE_PREINIT #define CONFIG_MVSATA_IDE_USE_PORT0 #define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET -#endif /* CONFIG_CMD_IDE */ +#endif /* CONFIG_IDE */ /* RTC driver configuration */ #ifdef CONFIG_CMD_DATE diff --git a/include/configs/qemu-x86.h b/include/configs/qemu-x86.h index b751ad5e14..3509c2f659 100644 --- a/include/configs/qemu-x86.h +++ b/include/configs/qemu-x86.h @@ -25,9 +25,9 @@ * - AHCI controller is supported for QEMU '-M q35' target * * Default configuraion is to support the QEMU default x86 target - * Undefine CONFIG_CMD_IDE to support q35 target + * Undefine CONFIG_IDE to support q35 target */ -#ifdef CONFIG_CMD_IDE +#ifdef CONFIG_IDE #define CONFIG_SYS_IDE_MAXBUS 2 #define CONFIG_SYS_IDE_MAXDEVICE 4 #define CONFIG_SYS_ATA_BASE_ADDR 0 diff --git a/include/configs/r7780mp.h b/include/configs/r7780mp.h index 26c5f0feeb..bb79a9ffea 100644 --- a/include/configs/r7780mp.h +++ b/include/configs/r7780mp.h @@ -119,7 +119,7 @@ #endif /* Compact flash Support */ -#if defined(CONFIG_CMD_IDE) +#if defined(CONFIG_IDE) #define CONFIG_IDE_RESET 1 #define CONFIG_SYS_PIO_MODE 1 #define CONFIG_SYS_IDE_MAXBUS 1 /* IDE bus */ @@ -130,6 +130,6 @@ #define CONFIG_SYS_ATA_REG_OFFSET 0x1000 /* reg offset */ #define CONFIG_SYS_ATA_ALT_OFFSET 0x800 /* alternate register offset */ #define CONFIG_IDE_SWAP_IO -#endif /* CONFIG_CMD_IDE */ +#endif /* CONFIG_IDE */ #endif /* __R7780RP_H */ diff --git a/include/configs/sheevaplug.h b/include/configs/sheevaplug.h index a111057313..9d2c106d46 100644 --- a/include/configs/sheevaplug.h +++ b/include/configs/sheevaplug.h @@ -90,13 +90,13 @@ /* * SATA driver configuration */ -#ifdef CONFIG_CMD_IDE +#ifdef CONFIG_IDE #define __io #define CONFIG_IDE_PREINIT #define CONFIG_MVSATA_IDE_USE_PORT0 #define CONFIG_MVSATA_IDE_USE_PORT1 #define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET #define CONFIG_SYS_ATA_IDE1_OFFSET MV_SATA_PORT1_OFFSET -#endif /* CONFIG_CMD_IDE */ +#endif /* CONFIG_IDE */ #endif /* _CONFIG_SHEEVAPLUG_H */ diff --git a/include/pcmcia.h b/include/pcmcia.h index c8a730c4d0..aaaf6511a8 100644 --- a/include/pcmcia.h +++ b/include/pcmcia.h @@ -16,7 +16,7 @@ * or try to generate a useful default */ #if defined(CONFIG_CMD_PCMCIA) || \ - (defined(CONFIG_CMD_IDE) && \ + (defined(CONFIG_IDE) && \ (defined(CONFIG_IDE_8xx_PCCARD) || defined(CONFIG_IDE_8xx_DIRECT) ) ) #if !defined(CONFIG_PCMCIA_SLOT_A) && !defined(CONFIG_PCMCIA_SLOT_B) @@ -268,7 +268,7 @@ extern u_int *pcmcia_pgcrx[]; #define PCMCIA_PGCRX(slot) (*pcmcia_pgcrx[slot]) #endif -#if defined(CONFIG_CMD_IDE) && defined(CONFIG_IDE_8xx_PCCARD) +#if defined(CONFIG_IDE) && defined(CONFIG_IDE_8xx_PCCARD) extern int check_ide_device(int slot); #endif