From: Amit Kumar Mahapatra <amit.kumar-mahapatra@xilinx.com>
Date: Thu, 18 Feb 2021 07:50:21 +0000 (-0700)
Subject: arm64: zynqmp: Update device tree properties for nand flash
X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=fbf043d7e637378354fdc47369b0f48682d766a3;p=u-boot.git

arm64: zynqmp: Update device tree properties for nand flash

Update the following device tree properties for nand flash

- Set software ecc mode.
- Set bch as ecc algo.
- Set read block to 0.

Signed-off-by: Amit Kumar Mahapatra <amit.kumar-mahapatra@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---

diff --git a/arch/arm/dts/zynqmp-zc1751-xm016-dc2.dts b/arch/arm/dts/zynqmp-zc1751-xm016-dc2.dts
index 92d938d665..3204456e64 100644
--- a/arch/arm/dts/zynqmp-zc1751-xm016-dc2.dts
+++ b/arch/arm/dts/zynqmp-zc1751-xm016-dc2.dts
@@ -124,6 +124,10 @@
 		reg = <0x0>;
 		#address-cells = <0x2>;
 		#size-cells = <0x1>;
+		nand-ecc-mode = "soft";
+		nand-ecc-algo = "bch";
+		nand-rb = <0>;
+		label = "main-storage-0";
 
 		partition@0 {	/* for testing purpose */
 			label = "nand-fsbl-uboot";
@@ -154,6 +158,10 @@
 		reg = <0x1>;
 		#address-cells = <0x2>;
 		#size-cells = <0x1>;
+		nand-ecc-mode = "soft";
+		nand-ecc-algo = "bch";
+		nand-rb = <0>;
+		label = "main-storage-1";
 
 		partition@0 {	/* for testing purpose */
 			label = "nand1-fsbl-uboot";