From: Suman Anna Date: Wed, 23 Nov 2016 07:24:40 +0000 (+0530) Subject: ARM: DRA7: Redefine voltage and efuse macros per OPP using Kconfig X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=fba82eb7c9eea2fcf5fa05c45cbec26c3410f9f3;p=u-boot.git ARM: DRA7: Redefine voltage and efuse macros per OPP using Kconfig Redefine the macros used to define the voltage values and the efuse register offsets based on OPP for all the voltage domains. This is done using Kconfig macros that can be set in a defconfig or selected during a config step. This allows a voltage domain to be configured/set to a corresponding voltage value depending on the OPP selection choice. The Kconfig choices have been added for MPU, DSPEVE, IVA and GPU voltage domains, with the MPU domain restricted to OPP_NOM. The OPP_OD and OPP_HIGH options will be added when the support for configuring the MPU clock frequency is added. The clock configuration for other voltage domains is out of scope in u-boot code. The CORE voltage domain does not have separate voltage values and efuse register offset at different OPPs, while the MPU voltage domain only has different efuse register offsets for different OPPs, but uses the same voltage value. Any different choices of OPPs for voltage domains on common ganged-rails is automatically taken care to select the corresponding highest OPP voltage value. Signed-off-by: Suman Anna Signed-off-by: Lokesh Vutla Reviewed-by: Tom Rini --- diff --git a/arch/arm/include/asm/arch-omap5/clock.h b/arch/arm/include/asm/arch-omap5/clock.h index f6ea1df1a4..57287ff36c 100644 --- a/arch/arm/include/asm/arch-omap5/clock.h +++ b/arch/arm/include/asm/arch-omap5/clock.h @@ -286,19 +286,40 @@ /* STD_FUSE_OPP_VMIN_MPU_4 */ #define STD_FUSE_OPP_VMIN_MPU_HIGH (DRA752_EFUSE_BASE + 0x1B28) -/* Common voltage and Efuse register macros */ -/* DRA74x/DRA75x/DRA72x */ -#define VDD_MPU_DRA7 VDD_MPU_DRA7_NOM -#define VDD_CORE_DRA7 VDD_CORE_DRA7_NOM -#define VDD_EVE_DRA7 VDD_EVE_DRA7_NOM -#define VDD_GPU_DRA7 VDD_GPU_DRA7_NOM -#define VDD_IVA_DRA7 VDD_IVA_DRA7_NOM - -#define STD_FUSE_OPP_VMIN_MPU STD_FUSE_OPP_VMIN_MPU_NOM -#define STD_FUSE_OPP_VMIN_CORE STD_FUSE_OPP_VMIN_CORE_NOM -#define STD_FUSE_OPP_VMIN_DSPEVE STD_FUSE_OPP_VMIN_DSPEVE_NOM -#define STD_FUSE_OPP_VMIN_GPU STD_FUSE_OPP_VMIN_GPU_NOM -#define STD_FUSE_OPP_VMIN_IVA STD_FUSE_OPP_VMIN_IVA_NOM +#if defined(CONFIG_DRA7_MPU_OPP_HIGH) +#define DRA7_MPU_OPP OPP_HIGH +#elif defined(CONFIG_DRA7_MPU_OPP_OD) +#define DRA7_MPU_OPP OPP_OD +#else /* OPP_NOM default */ +#define DRA7_MPU_OPP OPP_NOM +#endif + +/* OPP_NOM only available option for CORE */ +#define DRA7_CORE_OPP OPP_NOM + +#if defined(CONFIG_DRA7_DSPEVE_OPP_HIGH) +#define DRA7_DSPEVE_OPP OPP_HIGH +#elif defined(CONFIG_DRA7_DSPEVE_OPP_OD) +#define DRA7_DSPEVE_OPP OPP_OD +#else /* OPP_NOM default */ +#define DRA7_DSPEVE_OPP OPP_NOM +#endif + +#if defined(CONFIG_DRA7_IVA_OPP_HIGH) +#define DRA7_IVA_OPP OPP_HIGH +#elif defined(CONFIG_DRA7_IVA_OPP_OD) +#define DRA7_IVA_OPP OPP_OD +#else /* OPP_NOM default */ +#define DRA7_IVA_OPP OPP_NOM +#endif + +#if defined(CONFIG_DRA7_GPU_OPP_HIGH) +#define DRA7_GPU_OPP OPP_HIGH +#elif defined(CONFIG_DRA7_GPU_OPP_OD) +#define DRA7_GPU_OPP OPP_OD +#else /* OPP_NOM default */ +#define DRA7_GPU_OPP OPP_NOM +#endif /* Standard offset is 0.5v expressed in uv */ #define PALMAS_SMPS_BASE_VOLT_UV 500000 diff --git a/arch/arm/mach-omap2/omap5/Kconfig b/arch/arm/mach-omap2/omap5/Kconfig index 22259dcc5c..018e584e07 100644 --- a/arch/arm/mach-omap2/omap5/Kconfig +++ b/arch/arm/mach-omap2/omap5/Kconfig @@ -86,6 +86,99 @@ config TI_SECURE_EMIF_PROTECTED_REGION_SIZE using hardware memory firewalls. This value must be smaller than the TI_SECURE_EMIF_TOTAL_REGION_SIZE value. +if TARGET_DRA7XX_EVM || TARGET_AM57XX_EVM +menu "Voltage Domain OPP selections" + +choice + prompt "MPU Voltage Domain" + default DRA7_MPU_OPP_NOM + help + Select the Operating Performance Point(OPP) for the MPU voltage + domain on DRA7xx & AM57xx SoCs. + +config DRA7_MPU_OPP_NOM + bool "OPP NOM" + help + This config option enables Normal OPP for MPU. This is the safest + option for booting. + +endchoice + +choice + prompt "DSPEVE Voltage Domain" + help + Select the Operating Performance Point(OPP) for the DSPEVE voltage + domain on DRA7xx & AM57xx SoCs. + +config DRA7_DSPEVE_OPP_NOM + bool "OPP NOM" + help + This config option enables Normal OPP for DSPEVE. This is the safest + option for booting and choose this when unsure about other OPPs . + +config DRA7_DSPEVE_OPP_OD + bool "OPP OD" + help + This config option enables Over drive OPP for DSPEVE. + +config DRA7_DSPEVE_OPP_HIGH + bool "OPP HIGH" + help + This config option enables High OPP for DSPEVE. + +endchoice + +choice + prompt "IVA Voltage Domain" + help + Select the Operating Performance Point(OPP) for the IVA voltage + domain on DRA7xx & AM57xx SoCs. + +config DRA7_IVA_OPP_NOM + bool "OPP NOM" + help + This config option enables Normal OPP for IVA. This is the safest + option for booting and choose this when unsure about other OPPs . + +config DRA7_IVA_OPP_OD + bool "OPP OD" + help + This config option enables Over drive OPP for IVA. + +config DRA7_IVA_OPP_HIGH + bool "OPP HIGH" + help + This config option enables High OPP for IVA. + +endchoice + +choice + prompt "GPU Voltage Domain" + help + Select the Operating Performance Point(OPP) for the GPU voltage + domain on DRA7xx & AM57xx SoCs. + +config DRA7_GPU_OPP_NOM + bool "OPP NOM" + help + This config option enables Normal OPP for GPU. This is the safest + option for booting and choose this when unsure about other OPPs . + +config DRA7_GPU_OPP_OD + bool "OPP OD" + help + This config option enables Over drive OPP for GPU. + +config DRA7_GPU_OPP_HIGH + bool "OPP HIGH" + help + This config option enables High OPP for GPU. + +endchoice + +endmenu +endif + source "board/compulab/cm_t54/Kconfig" source "board/ti/omap5_uevm/Kconfig" source "board/ti/dra7xx/Kconfig"