From: Tim Harvey Date: Wed, 13 Apr 2022 15:56:40 +0000 (-0700) Subject: board: gateworks: venice: use common GSC driver X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=fb9ec33878aa72bdcd5c54be73fde1c33277fbab;p=u-boot.git board: gateworks: venice: use common GSC driver Use the common GSC driver. This allows us to do some additional cleanup: - rename gsc{.c,.h} to eeprom{.c.h} for clarity - collapse eeprom_get_dev - remove unnecessary header files and alphabatize includes Signed-off-by: Tim Harvey --- diff --git a/arch/arm/dts/imx8mm-venice-u-boot.dtsi b/arch/arm/dts/imx8mm-venice-u-boot.dtsi index 42b2903f04..c61c6de935 100644 --- a/arch/arm/dts/imx8mm-venice-u-boot.dtsi +++ b/arch/arm/dts/imx8mm-venice-u-boot.dtsi @@ -57,6 +57,10 @@ u-boot,dm-spl; }; +&gsc { + u-boot,dm-spl; +}; + &i2c2 { u-boot,dm-spl; }; diff --git a/arch/arm/dts/imx8mm-venice.dts b/arch/arm/dts/imx8mm-venice.dts index 54505a03c6..39b030691e 100644 --- a/arch/arm/dts/imx8mm-venice.dts +++ b/arch/arm/dts/imx8mm-venice.dts @@ -27,6 +27,13 @@ pinctrl-0 = <&pinctrl_i2c1>; status = "okay"; + gsc: gsc@20 { + compatible = "gw,gsc"; + reg = <0x20>; + #address-cells = <1>; + #size-cells = <0>; + }; + eeprom@51 { compatible = "atmel,24c02"; reg = <0x51>; diff --git a/arch/arm/dts/imx8mn-venice-u-boot.dtsi b/arch/arm/dts/imx8mn-venice-u-boot.dtsi index 055406e77b..4f23da3567 100644 --- a/arch/arm/dts/imx8mn-venice-u-boot.dtsi +++ b/arch/arm/dts/imx8mn-venice-u-boot.dtsi @@ -94,6 +94,10 @@ u-boot,dm-spl; }; +&gsc { + u-boot,dm-spl; +}; + &i2c2 { u-boot,dm-spl; }; diff --git a/arch/arm/dts/imx8mn-venice.dts b/arch/arm/dts/imx8mn-venice.dts index e906a56058..eeae225632 100644 --- a/arch/arm/dts/imx8mn-venice.dts +++ b/arch/arm/dts/imx8mn-venice.dts @@ -27,6 +27,13 @@ pinctrl-0 = <&pinctrl_i2c1>; status = "okay"; + gsc: gsc@20 { + compatible = "gw,gsc"; + reg = <0x20>; + #address-cells = <1>; + #size-cells = <0>; + }; + eeprom@51 { compatible = "atmel,24c02"; reg = <0x51>; diff --git a/arch/arm/mach-imx/imx8m/Kconfig b/arch/arm/mach-imx/imx8m/Kconfig index 55db25062a..1abf526112 100644 --- a/arch/arm/mach-imx/imx8m/Kconfig +++ b/arch/arm/mach-imx/imx8m/Kconfig @@ -97,6 +97,8 @@ config TARGET_IMX8MM_VENICE select IMX8MM select SUPPORT_SPL select IMX8M_LPDDR4 + select GATEWORKS_SC + select MISC config TARGET_KONTRON_MX8MM bool "Kontron Electronics N80xx" @@ -143,6 +145,8 @@ config TARGET_IMX8MN_VENICE select IMX8MN select SUPPORT_SPL select IMX8M_LPDDR4 + select GATEWORKS_SC + select MISC config TARGET_IMX8MP_EVK bool "imx8mp LPDDR4 EVK board" diff --git a/board/gateworks/venice/Makefile b/board/gateworks/venice/Makefile index b8b53fdc0e..fbb716ee85 100644 --- a/board/gateworks/venice/Makefile +++ b/board/gateworks/venice/Makefile @@ -4,7 +4,7 @@ # SPDX-License-Identifier: GPL-2.0+ # -obj-y += venice.o gsc.o +obj-y += venice.o eeprom.o ifdef CONFIG_SPL_BUILD obj-y += spl.o diff --git a/board/gateworks/venice/eeprom.c b/board/gateworks/venice/eeprom.c new file mode 100644 index 0000000000..62b8125960 --- /dev/null +++ b/board/gateworks/venice/eeprom.c @@ -0,0 +1,353 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2021 Gateworks Corporation + */ + +#include +#include +#include +#include +#include + +#include "eeprom.h" + +/* I2C */ +#define SOM_EEPROM_BUSNO 0 +#define SOM_EEPROM_ADDR 0x51 +#define BASEBOARD_EEPROM_BUSNO 1 +#define BASEBOARD_EEPROM_ADDR 0x52 + +struct venice_board_info som_info; +struct venice_board_info base_info; +char venice_model[32]; +u32 venice_serial; + +/* return a mac address from EEPROM info */ +int eeprom_getmac(int index, uint8_t *address) +{ + int i, j; + u32 maclow, machigh; + u64 mac; + + j = 0; + if (som_info.macno) { + maclow = som_info.mac[5]; + maclow |= som_info.mac[4] << 8; + maclow |= som_info.mac[3] << 16; + maclow |= som_info.mac[2] << 24; + machigh = som_info.mac[1]; + machigh |= som_info.mac[0] << 8; + mac = machigh; + mac <<= 32; + mac |= maclow; + for (i = 0; i < som_info.macno; i++, j++) { + if (index == j) + goto out; + } + } + + maclow = base_info.mac[5]; + maclow |= base_info.mac[4] << 8; + maclow |= base_info.mac[3] << 16; + maclow |= base_info.mac[2] << 24; + machigh = base_info.mac[1]; + machigh |= base_info.mac[0] << 8; + mac = machigh; + mac <<= 32; + mac |= maclow; + for (i = 0; i < base_info.macno; i++, j++) { + if (index == j) + goto out; + } + + return -EINVAL; + +out: + mac += i; + address[0] = (mac >> 40) & 0xff; + address[1] = (mac >> 32) & 0xff; + address[2] = (mac >> 24) & 0xff; + address[3] = (mac >> 16) & 0xff; + address[4] = (mac >> 8) & 0xff; + address[5] = (mac >> 0) & 0xff; + + return 0; +} + +static int eeprom_read(int busno, int slave, int alen, struct venice_board_info *info) +{ + int i; + int chksum; + unsigned char *buf = (unsigned char *)info; + struct udevice *dev, *bus; + int ret; + + /* probe device */ + ret = uclass_get_device_by_seq(UCLASS_I2C, busno, &bus); + if (ret) + return ret; + ret = dm_i2c_probe(bus, slave, 0, &dev); + if (ret) + return ret; + + /* read eeprom config section */ + memset(info, 0, sizeof(*info)); + ret = i2c_set_chip_offset_len(dev, alen); + if (ret) { + puts("EEPROM: Failed to set alen\n"); + return ret; + } + ret = dm_i2c_read(dev, 0x00, buf, sizeof(*info)); + if (ret) { + if (slave == SOM_EEPROM_ADDR) + printf("EEPROM: Failed to read EEPROM\n"); + return ret; + } + + /* validate checksum */ + for (chksum = 0, i = 0; i < (int)sizeof(*info) - 2; i++) + chksum += buf[i]; + if ((info->chksum[0] != chksum >> 8) || + (info->chksum[1] != (chksum & 0xff))) { + printf("EEPROM: I2C%d@0x%02x: Invalid Checksum\n", busno, slave); + print_hex_dump_bytes("", DUMP_PREFIX_NONE, buf, sizeof(*info)); + memset(info, 0, sizeof(*info)); + return -EINVAL; + } + + /* sanity check valid model */ + if (info->model[0] != 'G' || info->model[1] != 'W') { + printf("EEPROM: I2C%d@0x%02x: Invalid Model in EEPROM\n", busno, slave); + print_hex_dump_bytes("", DUMP_PREFIX_NONE, buf, sizeof(*info)); + memset(info, 0, sizeof(*info)); + return -EINVAL; + } + + return 0; +} + +/* determine BOM revision from model */ +int get_bom_rev(const char *str) +{ + int rev_bom = 0; + int i; + + for (i = strlen(str) - 1; i > 0; i--) { + if (str[i] == '-') + break; + if (str[i] >= '1' && str[i] <= '9') { + rev_bom = str[i] - '0'; + break; + } + } + return rev_bom; +} + +/* determine PCB revision from model */ +char get_pcb_rev(const char *str) +{ + char rev_pcb = 'A'; + int i; + + for (i = strlen(str) - 1; i > 0; i--) { + if (str[i] == '-') + break; + if (str[i] >= 'A') { + rev_pcb = str[i]; + break; + } + } + return rev_pcb; +} + +/* + * get dt name based on model and detail level: + * + * For boards that are a combination of a SoM plus a Baseboard: + * Venice SoM part numbers are GW70xx where xx is: + * 7000-7019: same PCB with som dt of '0x' + * 7020-7039: same PCB with som dt of '2x' + * 7040-7059: same PCB with som dt of '4x' + * 7060-7079: same PCB with som dt of '6x' + * 7080-7099: same PCB with som dt of '8x' + * Venice Baseboard part numbers are GW7xxx where xxx is: + * 7100-7199: same PCB with base dt of '71xx' + * 7200-7299: same PCB with base dt of '72xx' + * 7300-7399: same PCB with base dt of '73xx' + * 7400-7499: same PCB with base dt of '74xx' + * 7500-7599: same PCB with base dt of '75xx' + * 7600-7699: same PCB with base dt of '76xx' + * 7700-7799: same PCB with base dt of '77xx' + * 7800-7899: same PCB with base dt of '78xx' + * DT name is comprised of: + * gw--[base-pcb-rev][base-bom-rev][som-pcb-rev][som-bom-rev] + * + * For board models from 7900-7999 each PCB is unique with its own dt: + * DT name is comprised: + * gw-[pcb-rev][bom-rev] + * + */ +#define snprintfcat(dest, sz, fmt, ...) \ + snprintf((dest) + strlen(dest), (sz) - strlen(dest), fmt, ##__VA_ARGS__) +const char *eeprom_get_dtb_name(int level, char *buf, int sz) +{ +#ifdef CONFIG_IMX8MM + const char *pre = "imx8mm-venice-gw"; +#else + const char *pre = "imx8mn-venice-gw"; +#endif + int model, rev_pcb, rev_bom; + + model = ((som_info.model[2] - '0') * 1000) + + ((som_info.model[3] - '0') * 100) + + ((som_info.model[4] - '0') * 10) + + (som_info.model[5] - '0'); + rev_pcb = tolower(get_pcb_rev(som_info.model)); + rev_bom = get_bom_rev(som_info.model); + + /* som + baseboard*/ + if (base_info.model[0]) { + /* baseboard id: 7100-7199->71; 7200-7299->72; etc */ + int base = ((base_info.model[2] - '0') * 10) + (base_info.model[3] - '0'); + /* som id: 7000-7019->1; 7020-7039->2; etc */ + int som = ((model % 100) / 20) * 2; + int rev_base_pcb = tolower(get_pcb_rev(base_info.model)); + int rev_base_bom = get_bom_rev(base_info.model); + + snprintf(buf, sz, "%s%2dxx-%dx", pre, base, som); + switch (level) { + case 0: /* full model (ie gw73xx-0x-a1a1) */ + if (rev_base_bom) + snprintfcat(buf, sz, "-%c%d", rev_base_pcb, rev_base_bom); + else + snprintfcat(buf, sz, "-%c", rev_base_pcb); + if (rev_bom) + snprintfcat(buf, sz, "%c%d", rev_pcb, rev_bom); + else + snprintfcat(buf, sz, "%c", rev_pcb); + break; + case 1: /* don't care about SoM revision */ + if (rev_base_bom) + snprintfcat(buf, sz, "-%c%d", rev_base_pcb, rev_base_bom); + else + snprintfcat(buf, sz, "-%c", rev_base_pcb); + snprintfcat(buf, sz, "xx"); + break; + case 2: /* don't care about baseboard revision */ + snprintfcat(buf, sz, "-xx"); + if (rev_bom) + snprintfcat(buf, sz, "%c%d", rev_pcb, rev_bom); + else + snprintfcat(buf, sz, "%c", rev_pcb); + break; + case 3: /* don't care about SoM/baseboard revision */ + break; + default: + return NULL; + } + } else { + snprintf(buf, sz, "%s%04d", pre, model); + switch (level) { + case 0: /* full model wth PCB and BOM revision first (ie gw7901-a1) */ + if (rev_bom) + snprintfcat(buf, sz, "-%c%d", rev_pcb, rev_bom); + else + snprintfcat(buf, sz, "-%c", rev_pcb); + break; + case 1: /* don't care about BOM revision */ + snprintfcat(buf, sz, "-%c", rev_pcb); + break; + case 2: /* don't care about PCB or BOM revision */ + break; + default: + return NULL; + } + } + + return buf; +} + +static int eeprom_info(bool verbose) +{ + printf("Model : %s\n", venice_model); + printf("Serial : %d\n", som_info.serial); + printf("MFGDate : %02x-%02x-%02x%02x\n", + som_info.mfgdate[0], som_info.mfgdate[1], + som_info.mfgdate[2], som_info.mfgdate[3]); + if (base_info.model[0] && verbose) { + printf("SOM : %s %d %02x-%02x-%02x%02x\n", + som_info.model, som_info.serial, + som_info.mfgdate[0], som_info.mfgdate[1], + som_info.mfgdate[2], som_info.mfgdate[3]); + printf("BASE : %s %d %02x-%02x-%02x%02x\n", + base_info.model, base_info.serial, + base_info.mfgdate[0], base_info.mfgdate[1], + base_info.mfgdate[2], base_info.mfgdate[3]); + } + + return 0; +} + +int eeprom_init(int quiet) +{ + char rev_pcb; + int rev_bom; + int ret; + + ret = eeprom_read(SOM_EEPROM_BUSNO, SOM_EEPROM_ADDR, 1, &som_info); + if (ret) { + puts("ERROR: Failed to probe EEPROM\n"); + memset(&som_info, 0, sizeof(som_info)); + return 0; + } + + /* read optional baseboard EEPROM */ + eeprom_read(BASEBOARD_EEPROM_BUSNO, BASEBOARD_EEPROM_ADDR, 2, &base_info); + + /* create model strings */ + if (base_info.model[0]) { + sprintf(venice_model, "GW%c%c%c%c-%c%c-", + som_info.model[2], /* family */ + base_info.model[3], /* baseboard */ + base_info.model[4], base_info.model[5], /* subload of baseboard */ + som_info.model[4], som_info.model[5]); /* last 2digits of SOM */ + + /* baseboard revision */ + rev_pcb = get_pcb_rev(base_info.model); + rev_bom = get_bom_rev(base_info.model); + if (rev_bom) + sprintf(venice_model + strlen(venice_model), "%c%d", rev_pcb, rev_bom); + else + sprintf(venice_model + strlen(venice_model), "%c", rev_pcb); + /* som revision */ + rev_pcb = get_pcb_rev(som_info.model); + rev_bom = get_bom_rev(som_info.model); + if (rev_bom) + sprintf(venice_model + strlen(venice_model), "%c%d", rev_pcb, rev_bom); + else + sprintf(venice_model + strlen(venice_model), "%c", rev_pcb); + } else { + strcpy(venice_model, som_info.model); + } + venice_serial = som_info.serial; + + if (!quiet) + eeprom_info(false); + + return (16 << som_info.sdram_size); +} + +void board_gsc_info(void) +{ + eeprom_info(true); +} + +const char *eeprom_get_model(void) +{ + return venice_model; +} + +u32 eeprom_get_serial(void) +{ + return venice_serial; +} diff --git a/board/gateworks/venice/gsc.h b/board/gateworks/venice/eeprom.h similarity index 55% rename from board/gateworks/venice/gsc.h rename to board/gateworks/venice/eeprom.h index b391b2e326..37bfe76ad8 100644 --- a/board/gateworks/venice/gsc.h +++ b/board/gateworks/venice/eeprom.h @@ -3,19 +3,8 @@ * Copyright 2021 Gateworks Corporation */ -#ifndef _GSC_H_ -#define _GSC_H_ - -/* I2C bus numbers */ -#define GSC_BUSNO 0 -#define BASEBOARD_EEPROM_BUSNO 1 - -/* I2C slave addresses */ -#define GSC_SC_ADDR 0x20 -#define GSC_RTC_ADDR 0x68 -#define GSC_HWMON_ADDR 0x29 -#define GSC_EEPROM_ADDR 0x51 -#define BASEBOARD_EEPROM_ADDR 0x52 +#ifndef _VENICE_EEPROM_H_ +#define _VENICE_EEPROM_H_ struct venice_board_info { u8 mac[6]; /* 0x00: MAC base */ @@ -35,11 +24,10 @@ struct venice_board_info { u8 chksum[2]; /* 0x4E */ }; -int gsc_init(int quiet); -int gsc_hwmon(void); -const char *gsc_get_model(void); -const char *gsc_get_dtb_name(int level, char *buf, int len); -int gsc_getmac(int index, uint8_t *enetaddr); -uint32_t gsc_get_serial(void); +int eeprom_init(int quiet); +const char *eeprom_get_model(void); +const char *eeprom_get_dtb_name(int level, char *buf, int len); +int eeprom_getmac(int index, uint8_t *enetaddr); +uint32_t eeprom_get_serial(void); #endif diff --git a/board/gateworks/venice/gsc.c b/board/gateworks/venice/gsc.c deleted file mode 100644 index 763b89b363..0000000000 --- a/board/gateworks/venice/gsc.c +++ /dev/null @@ -1,700 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright 2021 Gateworks Corporation - */ - -#include -#include -#include -#include -#include -#include -#include - -#include "gsc.h" - -DECLARE_GLOBAL_DATA_PTR; - -struct venice_board_info som_info; -struct venice_board_info base_info; -char venice_model[32]; -uint32_t venice_serial; - -/* return a mac address from EEPROM info */ -int gsc_getmac(int index, uint8_t *address) -{ - int i, j; - u32 maclow, machigh; - u64 mac; - - j = 0; - if (som_info.macno) { - maclow = som_info.mac[5]; - maclow |= som_info.mac[4] << 8; - maclow |= som_info.mac[3] << 16; - maclow |= som_info.mac[2] << 24; - machigh = som_info.mac[1]; - machigh |= som_info.mac[0] << 8; - mac = machigh; - mac <<= 32; - mac |= maclow; - for (i = 0; i < som_info.macno; i++, j++) { - if (index == j) - goto out; - } - } - - maclow = base_info.mac[5]; - maclow |= base_info.mac[4] << 8; - maclow |= base_info.mac[3] << 16; - maclow |= base_info.mac[2] << 24; - machigh = base_info.mac[1]; - machigh |= base_info.mac[0] << 8; - mac = machigh; - mac <<= 32; - mac |= maclow; - for (i = 0; i < base_info.macno; i++, j++) { - if (index == j) - goto out; - } - - return -EINVAL; - -out: - mac += i; - address[0] = (mac >> 40) & 0xff; - address[1] = (mac >> 32) & 0xff; - address[2] = (mac >> 24) & 0xff; - address[3] = (mac >> 16) & 0xff; - address[4] = (mac >> 8) & 0xff; - address[5] = (mac >> 0) & 0xff; - - return 0; -} - -/* System Controller registers */ -enum { - GSC_SC_CTRL0 = 0, - GSC_SC_CTRL1 = 1, - GSC_SC_STATUS = 10, - GSC_SC_FWCRC = 12, - GSC_SC_FWVER = 14, - GSC_SC_WP = 15, - GSC_SC_RST_CAUSE = 16, - GSC_SC_THERM_PROTECT = 19, -}; - -/* System Controller Control1 bits */ -enum { - GSC_SC_CTRL1_WDTIME = 4, /* 1 = 60s timeout, 0 = 30s timeout */ - GSC_SC_CTRL1_WDEN = 5, /* 1 = enable, 0 = disable */ - GSC_SC_CTRL1_BOOT_CHK = 6, /* 1 = enable alt boot check */ - GSC_SC_CTRL1_WDDIS = 7, /* 1 = disable boot watchdog */ -}; - -/* System Controller Interrupt bits */ -enum { - GSC_SC_IRQ_PB = 0, /* Pushbutton switch */ - GSC_SC_IRQ_SECURE = 1, /* Secure Key erase operation complete */ - GSC_SC_IRQ_EEPROM_WP = 2, /* EEPROM write violation */ - GSC_SC_IRQ_GPIO = 4, /* GPIO change */ - GSC_SC_IRQ_TAMPER = 5, /* Tamper detect */ - GSC_SC_IRQ_WATCHDOG = 6, /* Watchdog trip */ - GSC_SC_IRQ_PBLONG = 7, /* Pushbutton long hold */ -}; - -/* System Controller WP bits */ -enum { - GSC_SC_WP_ALL = 0, /* Write Protect All EEPROM regions */ - GSC_SC_WP_BOARDINFO = 1, /* Write Protect Board Info region */ -}; - -/* System Controller Reset Cause */ -enum { - GSC_SC_RST_CAUSE_VIN = 0, - GSC_SC_RST_CAUSE_PB = 1, - GSC_SC_RST_CAUSE_WDT = 2, - GSC_SC_RST_CAUSE_CPU = 3, - GSC_SC_RST_CAUSE_TEMP_LOCAL = 4, - GSC_SC_RST_CAUSE_TEMP_REMOTE = 5, - GSC_SC_RST_CAUSE_SLEEP = 6, - GSC_SC_RST_CAUSE_BOOT_WDT = 7, - GSC_SC_RST_CAUSE_BOOT_WDT_MAN = 8, - GSC_SC_RST_CAUSE_SOFT_PWR = 9, - GSC_SC_RST_CAUSE_MAX = 10, -}; - -#include -static struct udevice *gsc_get_dev(int busno, int slave) -{ - struct udevice *dev, *bus; - int ret; - - ret = uclass_get_device_by_seq(UCLASS_I2C, busno, &bus); - if (ret) { - printf("GSC : failed I2C%d probe: %d\n", busno, ret); - return NULL; - } - ret = dm_i2c_probe(bus, slave, 0, &dev); - if (ret) - return NULL; - - return dev; -} - -static int gsc_read_eeprom(int bus, int slave, int alen, struct venice_board_info *info) -{ - int i; - int chksum; - unsigned char *buf = (unsigned char *)info; - struct udevice *dev; - int ret; - - /* probe device */ - dev = gsc_get_dev(bus, slave); - if (!dev) { - if (slave == GSC_EEPROM_ADDR) - puts("ERROR: Failed to probe EEPROM\n"); - return -ENODEV; - } - - /* read eeprom config section */ - memset(info, 0, sizeof(*info)); - ret = i2c_set_chip_offset_len(dev, alen); - if (ret) { - puts("EEPROM: Failed to set alen\n"); - return ret; - } - ret = dm_i2c_read(dev, 0x00, buf, sizeof(*info)); - if (ret) { - if (slave == GSC_EEPROM_ADDR) - printf("EEPROM: Failed to read EEPROM\n"); - return ret; - } - - /* validate checksum */ - for (chksum = 0, i = 0; i < (int)sizeof(*info) - 2; i++) - chksum += buf[i]; - if ((info->chksum[0] != chksum >> 8) || - (info->chksum[1] != (chksum & 0xff))) { - printf("EEPROM: I2C%d@0x%02x: Invalid Checksum\n", bus, slave); - print_hex_dump_bytes("", DUMP_PREFIX_NONE, buf, sizeof(*info)); - memset(info, 0, sizeof(*info)); - return -EINVAL; - } - - /* sanity check valid model */ - if (info->model[0] != 'G' || info->model[1] != 'W') { - printf("EEPROM: I2C%d@0x%02x: Invalid Model in EEPROM\n", bus, slave); - print_hex_dump_bytes("", DUMP_PREFIX_NONE, buf, sizeof(*info)); - memset(info, 0, sizeof(*info)); - return -EINVAL; - } - - return 0; -} - -static const char *gsc_get_rst_cause(struct udevice *dev) -{ - static char str[64]; - static const char * const names[] = { - "VIN", - "PB", - "WDT", - "CPU", - "TEMP_L", - "TEMP_R", - "SLEEP", - "BOOT_WDT1", - "BOOT_WDT2", - "SOFT_PWR", - }; - unsigned char reg; - - /* reset cause */ - str[0] = 0; - if (!dm_i2c_read(dev, GSC_SC_RST_CAUSE, ®, 1)) { - if (reg < ARRAY_SIZE(names)) - sprintf(str, "%s", names[reg]); - else - sprintf(str, "0x%02x", reg); - } - - /* thermal protection */ - if (!dm_i2c_read(dev, GSC_SC_THERM_PROTECT, ®, 1)) { - strcat(str, " Thermal Protection "); - if (reg & BIT(0)) - strcat(str, "Enabled"); - else - strcat(str, "Disabled"); - } - - return str; -} - -/* display hardware monitor ADC channels */ -int gsc_hwmon(void) -{ - const void *fdt = gd->fdt_blob; - struct udevice *dev; - int node, reg, mode, len, val, offset; - const char *label; - u8 buf[2]; - int ret; - - node = fdt_node_offset_by_compatible(fdt, -1, "gw,gsc-adc"); - if (node <= 0) - return node; - - /* probe device */ - dev = gsc_get_dev(GSC_BUSNO, GSC_HWMON_ADDR); - if (!dev) { - puts("ERROR: Failed to probe GSC HWMON\n"); - return -ENODEV; - } - - /* iterate over hwmon nodes */ - node = fdt_first_subnode(fdt, node); - while (node > 0) { - reg = fdtdec_get_int(fdt, node, "reg", -1); - mode = fdtdec_get_int(fdt, node, "gw,mode", -1); - offset = fdtdec_get_int(fdt, node, "gw,voltage-offset-microvolt", 0); - label = fdt_stringlist_get(fdt, node, "label", 0, NULL); - - if ((reg == -1) || (mode == -1) || !label) - printf("invalid dt:%s\n", fdt_get_name(fdt, node, NULL)); - - memset(buf, 0, sizeof(buf)); - ret = dm_i2c_read(dev, reg, buf, sizeof(buf)); - if (ret) { - printf("i2c error: %d\n", ret); - continue; - } - val = buf[0] | buf[1] << 8; - if (val >= 0) { - const u32 *div; - int r[2]; - - switch (mode) { - case 0: /* temperature (C*10) */ - if (val > 0x8000) - val -= 0xffff; - printf("%-8s: %d.%ldC\n", label, val / 10, abs(val % 10)); - break; - case 1: /* prescaled voltage */ - if (val != 0xffff) - printf("%-8s: %d.%03dV\n", label, val / 1000, val % 1000); - break; - case 2: /* scaled based on ref volt and resolution */ - val *= 2500; - val /= 1 << 12; - - /* apply pre-scaler voltage divider */ - div = fdt_getprop(fdt, node, "gw,voltage-divider-ohms", &len); - if (div && (len == sizeof(uint32_t) * 2)) { - r[0] = fdt32_to_cpu(div[0]); - r[1] = fdt32_to_cpu(div[1]); - if (r[0] && r[1]) { - val *= (r[0] + r[1]); - val /= r[1]; - } - } - - /* adjust by offset */ - val += (offset / 1000); - - printf("%-8s: %d.%03dV\n", label, val / 1000, val % 1000); - break; - } - } - node = fdt_next_subnode(fdt, node); - } - - return 0; -} - -/* determine BOM revision from model */ -int get_bom_rev(const char *str) -{ - int rev_bom = 0; - int i; - - for (i = strlen(str) - 1; i > 0; i--) { - if (str[i] == '-') - break; - if (str[i] >= '1' && str[i] <= '9') { - rev_bom = str[i] - '0'; - break; - } - } - return rev_bom; -} - -/* determine PCB revision from model */ -char get_pcb_rev(const char *str) -{ - char rev_pcb = 'A'; - int i; - - for (i = strlen(str) - 1; i > 0; i--) { - if (str[i] == '-') - break; - if (str[i] >= 'A') { - rev_pcb = str[i]; - break; - } - } - return rev_pcb; -} - -/* - * get dt name based on model and detail level: - * - * For boards that are a combination of a SoM plus a Baseboard: - * Venice SoM part numbers are GW70xx where xx is: - * 7000-7019: same PCB with som dt of '0x' - * 7020-7039: same PCB with som dt of '2x' - * 7040-7059: same PCB with som dt of '4x' - * 7060-7079: same PCB with som dt of '6x' - * 7080-7099: same PCB with som dt of '8x' - * Venice Baseboard part numbers are GW7xxx where xxx is: - * 7100-7199: same PCB with base dt of '71xx' - * 7200-7299: same PCB with base dt of '72xx' - * 7300-7399: same PCB with base dt of '73xx' - * 7400-7499: same PCB with base dt of '74xx' - * 7500-7599: same PCB with base dt of '75xx' - * 7600-7699: same PCB with base dt of '76xx' - * 7700-7799: same PCB with base dt of '77xx' - * 7800-7899: same PCB with base dt of '78xx' - * DT name is comprised of: - * gw--[base-pcb-rev][base-bom-rev][som-pcb-rev][som-bom-rev] - * - * For board models from 7900-7999 each PCB is unique with its own dt: - * DT name is comprised: - * gw-[pcb-rev][bom-rev] - * - */ -#define snprintfcat(dest, sz, fmt, ...) \ - snprintf((dest) + strlen(dest), (sz) - strlen(dest), fmt, ##__VA_ARGS__) -const char *gsc_get_dtb_name(int level, char *buf, int sz) -{ -#ifdef CONFIG_IMX8MM - const char *pre = "imx8mm-venice-gw"; -#else - const char *pre = "imx8mn-venice-gw"; -#endif - int model, rev_pcb, rev_bom; - - model = ((som_info.model[2] - '0') * 1000) - + ((som_info.model[3] - '0') * 100) - + ((som_info.model[4] - '0') * 10) - + (som_info.model[5] - '0'); - rev_pcb = tolower(get_pcb_rev(som_info.model)); - rev_bom = get_bom_rev(som_info.model); - - /* som + baseboard*/ - if (base_info.model[0]) { - /* baseboard id: 7100-7199->71; 7200-7299->72; etc */ - int base = ((base_info.model[2] - '0') * 10) + (base_info.model[3] - '0'); - /* som id: 7000-7019->1; 7020-7039->2; etc */ - int som = ((model % 100) / 20) * 2; - int rev_base_pcb = tolower(get_pcb_rev(base_info.model)); - int rev_base_bom = get_bom_rev(base_info.model); - - snprintf(buf, sz, "%s%2dxx-%dx", pre, base, som); - switch (level) { - case 0: /* full model (ie gw73xx-0x-a1a1) */ - if (rev_base_bom) - snprintfcat(buf, sz, "-%c%d", rev_base_pcb, rev_base_bom); - else - snprintfcat(buf, sz, "-%c", rev_base_pcb); - if (rev_bom) - snprintfcat(buf, sz, "%c%d", rev_pcb, rev_bom); - else - snprintfcat(buf, sz, "%c", rev_pcb); - break; - case 1: /* don't care about SoM revision */ - if (rev_base_bom) - snprintfcat(buf, sz, "-%c%d", rev_base_pcb, rev_base_bom); - else - snprintfcat(buf, sz, "-%c", rev_base_pcb); - snprintfcat(buf, sz, "xx"); - break; - case 2: /* don't care about baseboard revision */ - snprintfcat(buf, sz, "-xx"); - if (rev_bom) - snprintfcat(buf, sz, "%c%d", rev_pcb, rev_bom); - else - snprintfcat(buf, sz, "%c", rev_pcb); - break; - case 3: /* don't care about SoM/baseboard revision */ - break; - default: - return NULL; - } - } else { - snprintf(buf, sz, "%s%04d", pre, model); - switch (level) { - case 0: /* full model wth PCB and BOM revision first (ie gw7901-a1) */ - if (rev_bom) - snprintfcat(buf, sz, "-%c%d", rev_pcb, rev_bom); - else - snprintfcat(buf, sz, "-%c", rev_pcb); - break; - case 1: /* don't care about BOM revision */ - snprintfcat(buf, sz, "-%c", rev_pcb); - break; - case 2: /* don't care about PCB or BOM revision */ - break; - default: - return NULL; - } - } - - return buf; -} - -static int gsc_read(void) -{ - char rev_pcb; - int rev_bom; - int ret; - - ret = gsc_read_eeprom(GSC_BUSNO, GSC_EEPROM_ADDR, 1, &som_info); - if (ret) { - memset(&som_info, 0, sizeof(som_info)); - return ret; - } - - /* read optional baseboard EEPROM */ - gsc_read_eeprom(BASEBOARD_EEPROM_BUSNO, BASEBOARD_EEPROM_ADDR, - 2, &base_info); - - /* create model strings */ - if (base_info.model[0]) { - sprintf(venice_model, "GW%c%c%c%c-%c%c-", - som_info.model[2], /* family */ - base_info.model[3], /* baseboard */ - base_info.model[4], base_info.model[5], /* subload of baseboard */ - som_info.model[4], som_info.model[5]); /* last 2digits of SOM */ - - /* baseboard revision */ - rev_pcb = get_pcb_rev(base_info.model); - rev_bom = get_bom_rev(base_info.model); - if (rev_bom) - sprintf(venice_model + strlen(venice_model), "%c%d", rev_pcb, rev_bom); - else - sprintf(venice_model + strlen(venice_model), "%c", rev_pcb); - /* som revision */ - rev_pcb = get_pcb_rev(som_info.model); - rev_bom = get_bom_rev(som_info.model); - if (rev_bom) - sprintf(venice_model + strlen(venice_model), "%c%d", rev_pcb, rev_bom); - else - sprintf(venice_model + strlen(venice_model), "%c", rev_pcb); - } else { - strcpy(venice_model, som_info.model); - } - venice_serial = som_info.serial; - - return 0; -} - -static int gsc_info(int verbose) -{ - struct udevice *dev; - unsigned char buf[16]; - - printf("Model : %s\n", venice_model); - printf("Serial : %d\n", som_info.serial); - printf("MFGDate : %02x-%02x-%02x%02x\n", - som_info.mfgdate[0], som_info.mfgdate[1], - som_info.mfgdate[2], som_info.mfgdate[3]); - if (base_info.model[0] && verbose > 1) { - printf("SOM : %s %d %02x-%02x-%02x%02x\n", - som_info.model, som_info.serial, - som_info.mfgdate[0], som_info.mfgdate[1], - som_info.mfgdate[2], som_info.mfgdate[3]); - printf("BASE : %s %d %02x-%02x-%02x%02x\n", - base_info.model, base_info.serial, - base_info.mfgdate[0], base_info.mfgdate[1], - base_info.mfgdate[2], base_info.mfgdate[3]); - } - - /* Display RTC */ - puts("RTC : "); - dev = gsc_get_dev(GSC_BUSNO, GSC_RTC_ADDR); - if (!dev) { - puts("Failed to probe GSC RTC\n"); - } else { - dm_i2c_read(dev, 0, buf, 6); - printf("%d\n", buf[0] | buf[1] << 8 | buf[2] << 16 | buf[3] << 24); - } - - /* Display hwmon */ - gsc_hwmon(); - - return 0; -} - -int gsc_init(int quiet) -{ - unsigned char buf[16]; - struct udevice *dev; - int ret; - - /* - * On a board with a missing/depleted backup battery for GSC, the - * board may be ready to probe the GSC before its firmware is - * running. We will wait here indefinately for the GSC/EEPROM. - */ -#ifdef CONFIG_IMX8MN - // TODO: - // IMX8MN boots quicker than IMX8MM and exposes issue - // where because GSC I2C state machine isn't running and its - // SCL/SDA are driven low spams i2c errors - // - // Put a loop here that somehow waits for I2C CLK/DAT to be high - mdelay(40); -#endif - while (1) { - /* probe device */ - dev = gsc_get_dev(GSC_BUSNO, GSC_SC_ADDR); - if (dev) - break; - mdelay(1); - } - - ret = dm_i2c_read(dev, 0, buf, sizeof(buf)); - if (ret) { - puts("ERROR: Failed reading GSC\n"); - return ret; - } - gsc_read(); - - /* banner */ - if (!quiet) { - printf("GSC : v%d 0x%04x", buf[GSC_SC_FWVER], - buf[GSC_SC_FWCRC] | buf[GSC_SC_FWCRC + 1] << 8); - printf(" RST:%s", gsc_get_rst_cause(dev)); - printf("\n"); - gsc_info(1); - } - - if (ret) - hang(); - - return (16 << som_info.sdram_size); -} - -const char *gsc_get_model(void) -{ - return venice_model; -} - -uint32_t gsc_get_serial(void) -{ - return venice_serial; -} - -#if !(IS_ENABLED(CONFIG_SPL_BUILD)) -static int gsc_sleep(unsigned long secs) -{ - unsigned char reg; - struct udevice *dev; - int ret; - - /* probe device */ - dev = gsc_get_dev(GSC_BUSNO, GSC_SC_ADDR); - if (!dev) - return -ENODEV; - - printf("GSC Sleeping for %ld seconds\n", secs); - reg = (secs >> 24) & 0xff; - ret = dm_i2c_write(dev, 9, ®, 1); - if (ret) - goto err; - reg = (secs >> 16) & 0xff; - ret = dm_i2c_write(dev, 8, ®, 1); - if (ret) - goto err; - reg = (secs >> 8) & 0xff; - ret = dm_i2c_write(dev, 7, ®, 1); - if (ret) - goto err; - reg = secs & 0xff; - ret = dm_i2c_write(dev, 6, ®, 1); - if (ret) - goto err; - ret = dm_i2c_read(dev, GSC_SC_CTRL1, ®, 1); - if (ret) - goto err; - reg |= (1 << 2); - ret = dm_i2c_write(dev, GSC_SC_CTRL1, ®, 1); - if (ret) - goto err; - reg &= ~(1 << 2); - reg |= 0x3; - ret = dm_i2c_write(dev, GSC_SC_CTRL1, ®, 1); - if (ret) - goto err; - - return 0; - -err: - printf("i2c error\n"); - return ret; -} - -static int gsc_boot_wd_disable(void) -{ - u8 reg; - struct udevice *dev; - int ret; - - /* probe device */ - dev = gsc_get_dev(GSC_BUSNO, GSC_SC_ADDR); - if (!dev) - return -ENODEV; - - ret = dm_i2c_read(dev, GSC_SC_CTRL1, ®, 1); - if (ret) - goto err; - reg |= (1 << GSC_SC_CTRL1_WDDIS); - reg &= ~(1 << GSC_SC_CTRL1_BOOT_CHK); - ret = dm_i2c_write(dev, GSC_SC_CTRL1, ®, 1); - if (ret) - goto err; - puts("GSC : boot watchdog disabled\n"); - - return 0; - -err: - printf("i2c error"); - return ret; -} - -static int do_gsc(struct cmd_tbl *cmdtp, int flag, int argc, char * const argv[]) -{ - if (argc < 2) - return gsc_info(2); - - if (strcasecmp(argv[1], "sleep") == 0) { - if (argc < 3) - return CMD_RET_USAGE; - if (!gsc_sleep(dectoul(argv[2], NULL))) - return CMD_RET_SUCCESS; - } else if (strcasecmp(argv[1], "hwmon") == 0) { - if (!gsc_hwmon()) - return CMD_RET_SUCCESS; - } else if (strcasecmp(argv[1], "wd-disable") == 0) { - if (!gsc_boot_wd_disable()) - return CMD_RET_SUCCESS; - } - - return CMD_RET_USAGE; -} - -U_BOOT_CMD(gsc, 4, 1, do_gsc, "Gateworks System Controller", - "[sleep ]|[hwmon]|[wd-disable]\n"); -#endif diff --git a/board/gateworks/venice/spl.c b/board/gateworks/venice/spl.c index b56e1b607d..ba7118a388 100644 --- a/board/gateworks/venice/spl.c +++ b/board/gateworks/venice/spl.c @@ -7,13 +7,9 @@ #include #include #include -#include #include -#include #include -#include #include -#include #include #include #include @@ -21,22 +17,17 @@ #include #include #include - #include #include -#include -#include - +#include #include #include -#include "gsc.h" +#include "eeprom.h" #include "lpddr4_timing.h" #define PCIE_RSTN IMX_GPIO_NR(4, 6) -DECLARE_GLOBAL_DATA_PTR; - static void spl_dram_init(int size) { struct dram_timing_info *dram_timing; @@ -65,8 +56,8 @@ static void spl_dram_init(int size) dram_timing = &dram_timing_1gb_single_die; break; case 2048: - if (!strcmp(gsc_get_model(), "GW7902-SP466-A") || - !strcmp(gsc_get_model(), "GW7902-SP466-B")) { + if (!strcmp(eeprom_get_model(), "GW7902-SP466-A") || + !strcmp(eeprom_get_model(), "GW7902-SP466-B")) { dram_timing = &dram_timing_2gb_dual_die; } else { dram_timing = &dram_timing_2gb_single_die; @@ -149,7 +140,7 @@ static int dm_i2c_clrsetbits(struct udevice *dev, uint reg, uint clr, uint set) static int power_init_board(void) { - const char *model = gsc_get_model(); + const char *model = eeprom_get_model(); struct udevice *bus; struct udevice *dev; int ret; @@ -243,22 +234,36 @@ void board_init_f(ulong dummy) hang(); } - ret = uclass_get_device_by_name(UCLASS_CLK, - "clock-controller@30380000", - &dev); - if (ret < 0) { - printf("Failed to find clock node. Check device tree\n"); - hang(); - } - enable_tzc380(); /* need to hold PCIe switch in reset otherwise it can lock i2c bus EEPROM is on */ gpio_request(PCIE_RSTN, "perst#"); gpio_direction_output(PCIE_RSTN, 0); - /* GSC */ - dram_sz = gsc_init(0); + /* + * probe GSC device + * + * On a board with a missing/depleted backup battery for GSC, the + * board may be ready to probe the GSC before its firmware is + * running. We will wait here indefinately for the GSC EEPROM. + */ +#ifdef CONFIG_IMX8MN + /* + * IMX8MN boots quicker than IMX8MM and exposes issue + * where because GSC I2C state machine isn't running and its + * SCL/SDA are driven low the I2C driver spams 'Arbitration lost' + * I2C errors. + * + * TODO: Put a loop here that somehow waits for I2C CLK/DAT to be high + */ + mdelay(50); +#endif + while (1) { + if (!uclass_get_device_by_driver(UCLASS_MISC, DM_DRIVER_GET(gsc), &dev)) + break; + mdelay(1); + } + dram_sz = eeprom_init(0); /* PMIC */ power_init_board(); diff --git a/board/gateworks/venice/venice.c b/board/gateworks/venice/venice.c index 425c69056d..b1828f4f18 100644 --- a/board/gateworks/venice/venice.c +++ b/board/gateworks/venice/venice.c @@ -3,21 +3,12 @@ * Copyright 2021 Gateworks Corporation */ -#include #include #include -#include #include -#include - -#include #include -#include -#include - -#include "gsc.h" -DECLARE_GLOBAL_DATA_PTR; +#include "eeprom.h" int board_phys_sdram_size(phys_size_t *size) { @@ -37,7 +28,7 @@ int board_fit_config_name_match(const char *name) char buf[32]; do { - dtb = gsc_get_dtb_name(i++, buf, sizeof(buf)); + dtb = eeprom_get_dtb_name(i++, buf, sizeof(buf)); if (!strcmp(dtb, name)) { if (!init++) printf("DTB : %s\n", name); @@ -100,13 +91,11 @@ int board_phy_config(struct phy_device *phydev) int board_init(void) { - gsc_init(1); + eeprom_init(1); if (IS_ENABLED(CONFIG_FEC_MXC)) setup_fec(); - gsc_hwmon(); - return 0; } @@ -122,13 +111,13 @@ int board_late_init(void) /* Set board serial/model */ if (!env_get("serial#")) - env_set_ulong("serial#", gsc_get_serial()); - env_set("model", gsc_get_model()); + env_set_ulong("serial#", eeprom_get_serial()); + env_set("model", eeprom_get_model()); /* Set fdt_file vars */ i = 0; do { - str = gsc_get_dtb_name(i, fdt, sizeof(fdt)); + str = eeprom_get_dtb_name(i, fdt, sizeof(fdt)); if (str) { sprintf(env, "fdt_file%d", i + 1); strcat(fdt, ".dtb"); @@ -146,7 +135,7 @@ int board_late_init(void) sprintf(env, "ethaddr"); str = env_get(env); if (!str) { - ret = gsc_getmac(i, enetaddr); + ret = eeprom_getmac(i, enetaddr); if (!ret) eth_env_set_enetaddr(env, enetaddr); } @@ -166,7 +155,7 @@ int ft_board_setup(void *blob, struct bd_info *bd) int off; /* set board model dt prop */ - fdt_setprop_string(blob, 0, "board", gsc_get_model()); + fdt_setprop_string(blob, 0, "board", eeprom_get_model()); /* update temp thresholds */ off = fdt_path_offset(blob, "/thermal-zones/cpu-thermal/trips"); diff --git a/configs/imx8mn_venice_defconfig b/configs/imx8mn_venice_defconfig index 41898da4ae..afb9c5c894 100644 --- a/configs/imx8mn_venice_defconfig +++ b/configs/imx8mn_venice_defconfig @@ -13,6 +13,7 @@ CONFIG_SPL_TEXT_BASE=0x912000 CONFIG_TARGET_IMX8MN_VENICE=y CONFIG_SPL_MMC=y CONFIG_SPL_SERIAL=y +CONFIG_SPL_DRIVERS_MISC=y CONFIG_SPL=y CONFIG_ENV_OFFSET_REDUND=0xff8000 CONFIG_SPL_IMX_ROMAPI_LOADADDR=0x48000000