From: Ye Li Date: Tue, 17 Aug 2021 09:20:34 +0000 (+0800) Subject: mmc: fix device_remove when HS400_ES is enabled X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=fb8c2e8fa936f8ebe4b7cc822abe33ff620585cd;p=u-boot.git mmc: fix device_remove when HS400_ES is enabled HS400_ES is missed when down grade to HS mode during device_remove the mmc device Signed-off-by: Ye Li Reviewed-by: Jaehoon Chung --- diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c index 6f767cbd63..d3babbfeb1 100644 --- a/drivers/mmc/mmc.c +++ b/drivers/mmc/mmc.c @@ -2092,14 +2092,16 @@ static int mmc_select_mode_and_width(struct mmc *mmc, uint card_caps) } #if CONFIG_IS_ENABLED(MMC_HS200_SUPPORT) || \ - CONFIG_IS_ENABLED(MMC_HS400_SUPPORT) + CONFIG_IS_ENABLED(MMC_HS400_SUPPORT) || \ + CONFIG_IS_ENABLED(MMC_HS400_ES_SUPPORT) /* * In case the eMMC is in HS200/HS400 mode, downgrade to HS mode * before doing anything else, since a transition from either of * the HS200/HS400 mode directly to legacy mode is not supported. */ if (mmc->selected_mode == MMC_HS_200 || - mmc->selected_mode == MMC_HS_400) + mmc->selected_mode == MMC_HS_400 || + mmc->selected_mode == MMC_HS_400_ES) mmc_set_card_speed(mmc, MMC_HS, true); else #endif @@ -2970,7 +2972,7 @@ int mmc_deinit(struct mmc *mmc) return sd_select_mode_and_width(mmc, caps_filtered); } else { caps_filtered = mmc->card_caps & - ~(MMC_CAP(MMC_HS_200) | MMC_CAP(MMC_HS_400)); + ~(MMC_CAP(MMC_HS_200) | MMC_CAP(MMC_HS_400) | MMC_CAP(MMC_HS_400_ES)); return mmc_select_mode_and_width(mmc, caps_filtered); }