From: Julien Masson Date: Fri, 5 Nov 2021 13:34:14 +0000 (+0100) Subject: mmc: mtk-sd: implement waiting for DAT0 line state X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=faf5d4d53d435bb4e15768cc135b6268b5104bbc;p=u-boot.git mmc: mtk-sd: implement waiting for DAT0 line state With the recent changes on mmc driver, we saw that the boot is ~5 secs longer compared to v2021.07 on mediatek platforms. This regression is seen during mmc_init and caused by the following patch [1]. Indeed since we did not support poll dat0, we fulfilled the condition of [1] and a delay of 500 ms was added for every __mmc_switch call. By adding the support of wait_dat0(), we now don't need to mdelay during mmc_init anymore. [1]: https://patchwork.ozlabs.org/project/uboot/patch/1629192034-64056-1-git-send-email-ye.li@nxp.com/ Signed-off-by: Julien Masson Reviewed-by: Jaehoon Chung --- diff --git a/drivers/mmc/mtk-sd.c b/drivers/mmc/mtk-sd.c index 8599f095bc..97182ffd7f 100644 --- a/drivers/mmc/mtk-sd.c +++ b/drivers/mmc/mtk-sd.c @@ -1724,6 +1724,20 @@ static int msdc_drv_bind(struct udevice *dev) return mmc_bind(dev, &plat->mmc, &plat->cfg); } +static int msdc_ops_wait_dat0(struct udevice *dev, int state, int timeout_us) +{ + struct msdc_host *host = dev_get_priv(dev); + int ret; + u32 reg; + + ret = readl_poll_sleep_timeout(&host->base->msdc_ps, reg, + !!(reg & MSDC_PS_DAT0) == !!state, + 1000, /* 1 ms */ + timeout_us); + + return ret; +} + static const struct dm_mmc_ops msdc_ops = { .send_cmd = msdc_ops_send_cmd, .set_ios = msdc_ops_set_ios, @@ -1732,6 +1746,7 @@ static const struct dm_mmc_ops msdc_ops = { #ifdef MMC_SUPPORTS_TUNING .execute_tuning = msdc_execute_tuning, #endif + .wait_dat0 = msdc_ops_wait_dat0, }; static const struct msdc_compatible mt7620_compat = {