From: Tom Rini Date: Fri, 10 Sep 2021 21:37:43 +0000 (-0400) Subject: arm: ti: k3: Resync dts files and bindings with Linux Kernel v5.14 X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=fa09b12dc5f67b5935fd40142e321bc13ed62b35;p=u-boot.git arm: ti: k3: Resync dts files and bindings with Linux Kernel v5.14 This resyncs the dts files for all of the currently in-tree K3 platforms, along with relevant bindings, with the v5.14 Linux Kernel release. Of note are that the main-navss/mcu-navss nodes were renamed to main_navss / mcu_navss and so the u-boot.dtsi files needed to be updated to match. Tested on j721e_evm and am65x_evm. Signed-off-by: Tom Rini --- diff --git a/arch/arm/dts/k3-am64-main.dtsi b/arch/arm/dts/k3-am64-main.dtsi index c5af2ffb8e..02c3fdf9cc 100644 --- a/arch/arm/dts/k3-am64-main.dtsi +++ b/arch/arm/dts/k3-am64-main.dtsi @@ -5,6 +5,17 @@ * Copyright (C) 2020-2021 Texas Instruments Incorporated - https://www.ti.com/ */ +#include +#include + +/ { + serdes_refclk: clock-cmnrefclk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <0>; + }; +}; + &cbass_main { oc_sram: sram@70000000 { compatible = "mmio-sram"; @@ -26,6 +37,20 @@ }; }; + main_conf: syscon@43000000 { + compatible = "ti,j721e-system-controller", "syscon", "simple-mfd"; + reg = <0x0 0x43000000 0x0 0x20000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x43000000 0x20000>; + + serdes_ln_ctrl: mux-controller { + compatible = "mmio-mux"; + #mux-control-cells = <1>; + mux-reg-masks = <0x4080 0x3>; /* SERDES0 lane0 select */ + }; + }; + gic500: interrupt-controller@1800000 { compatible = "arm,gic-v3"; #address-cells = <2>; @@ -50,12 +75,12 @@ }; }; - dmss: dmss { + dmss: bus@48000000 { compatible = "simple-mfd"; #address-cells = <2>; #size-cells = <2>; dma-ranges; - ranges; + ranges = <0x00 0x48000000 0x00 0x48000000 0x00 0x06400000>; ti,sci-dev-id = <25>; @@ -142,7 +167,7 @@ }; }; - dmsc: dmsc@44043000 { + dmsc: system-controller@44043000 { compatible = "ti,k2g-sci"; ti,host-id = <12>; mbox-names = "rx", "tx"; @@ -156,7 +181,7 @@ #power-domain-cells = <2>; }; - k3_clks: clocks { + k3_clks: clock-controller { compatible = "ti,k2g-sci-clk"; #clock-cells = <2>; }; @@ -197,8 +222,6 @@ main_uart0: serial@2800000 { compatible = "ti,am64-uart", "ti,am654-uart"; reg = <0x00 0x02800000 0x00 0x100>; - reg-shift = <2>; - reg-io-width = <4>; interrupts = ; clock-frequency = <48000000>; current-speed = <115200>; @@ -210,8 +233,6 @@ main_uart1: serial@2810000 { compatible = "ti,am64-uart", "ti,am654-uart"; reg = <0x00 0x02810000 0x00 0x100>; - reg-shift = <2>; - reg-io-width = <4>; interrupts = ; clock-frequency = <48000000>; current-speed = <115200>; @@ -223,8 +244,6 @@ main_uart2: serial@2820000 { compatible = "ti,am64-uart", "ti,am654-uart"; reg = <0x00 0x02820000 0x00 0x100>; - reg-shift = <2>; - reg-io-width = <4>; interrupts = ; clock-frequency = <48000000>; current-speed = <115200>; @@ -236,8 +255,6 @@ main_uart3: serial@2830000 { compatible = "ti,am64-uart", "ti,am654-uart"; reg = <0x00 0x02830000 0x00 0x100>; - reg-shift = <2>; - reg-io-width = <4>; interrupts = ; clock-frequency = <48000000>; current-speed = <115200>; @@ -249,8 +266,6 @@ main_uart4: serial@2840000 { compatible = "ti,am64-uart", "ti,am654-uart"; reg = <0x00 0x02840000 0x00 0x100>; - reg-shift = <2>; - reg-io-width = <4>; interrupts = ; clock-frequency = <48000000>; current-speed = <115200>; @@ -262,8 +277,6 @@ main_uart5: serial@2850000 { compatible = "ti,am64-uart", "ti,am654-uart"; reg = <0x00 0x02850000 0x00 0x100>; - reg-shift = <2>; - reg-io-width = <4>; interrupts = ; clock-frequency = <48000000>; current-speed = <115200>; @@ -275,8 +288,6 @@ main_uart6: serial@2860000 { compatible = "ti,am64-uart", "ti,am654-uart"; reg = <0x00 0x02860000 0x00 0x100>; - reg-shift = <2>; - reg-io-width = <4>; interrupts = ; clock-frequency = <48000000>; current-speed = <115200>; @@ -381,6 +392,52 @@ clocks = <&k3_clks 145 0>; }; + main_gpio_intr: interrupt-controller@a00000 { + compatible = "ti,sci-intr"; + reg = <0x00 0x00a00000 0x00 0x800>; + ti,intr-trigger-type = <1>; + interrupt-controller; + interrupt-parent = <&gic500>; + #interrupt-cells = <1>; + ti,sci = <&dmsc>; + ti,sci-dev-id = <3>; + ti,interrupt-ranges = <0 32 16>; + }; + + main_gpio0: gpio@600000 { + compatible = "ti,am64-gpio", "ti,keystone-gpio"; + reg = <0x0 0x00600000 0x0 0x100>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&main_gpio_intr>; + interrupts = <190>, <191>, <192>, + <193>, <194>, <195>; + interrupt-controller; + #interrupt-cells = <2>; + ti,ngpio = <87>; + ti,davinci-gpio-unbanked = <0>; + power-domains = <&k3_pds 77 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 77 0>; + clock-names = "gpio"; + }; + + main_gpio1: gpio@601000 { + compatible = "ti,am64-gpio", "ti,keystone-gpio"; + reg = <0x0 0x00601000 0x0 0x100>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&main_gpio_intr>; + interrupts = <180>, <181>, <182>, + <183>, <184>, <185>; + interrupt-controller; + #interrupt-cells = <2>; + ti,ngpio = <88>; + ti,davinci-gpio-unbanked = <0>; + power-domains = <&k3_pds 78 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 78 0>; + clock-names = "gpio"; + }; + sdhci0: mmc@fa10000 { compatible = "ti,am64-sdhci-8bit"; reg = <0x00 0xfa10000 0x00 0x260>, <0x00 0xfa18000 0x00 0x134>; @@ -451,7 +508,8 @@ ti,mac-only; label = "port1"; phys = <&phy_gmii_sel 1>; - mac-address = [00 00 de ad be ef]; + mac-address = [00 00 00 00 00 00]; + ti,syscon-efuse = <&main_conf 0x200>; }; cpsw_port2: port@2 { @@ -459,7 +517,7 @@ ti,mac-only; label = "port2"; phys = <&phy_gmii_sel 2>; - mac-address = [00 01 de ad be ef]; + mac-address = [00 00 00 00 00 00]; }; }; @@ -485,30 +543,23 @@ }; }; - main_gpio0: gpio@600000 { - compatible = "ti,j721e-gpio", "ti,keystone-gpio"; - reg = <0x00 0x00600000 0x00 0x100>; - gpio-controller; - #gpio-cells = <2>; - interrupts = <77 0 IRQ_TYPE_EDGE_RISING>, - <77 1 IRQ_TYPE_EDGE_RISING>, - <77 2 IRQ_TYPE_EDGE_RISING>, - <77 3 IRQ_TYPE_EDGE_RISING>, - <77 4 IRQ_TYPE_EDGE_RISING>, - <77 5 IRQ_TYPE_EDGE_RISING>, - <77 6 IRQ_TYPE_EDGE_RISING>, - <77 7 IRQ_TYPE_EDGE_RISING>; - interrupt-controller; - #interrupt-cells = <2>; - ti,ngpio = <69>; - ti,davinci-gpio-unbanked = <0>; - power-domains = <&k3_pds 77 TI_SCI_PD_EXCLUSIVE>; - clocks = <&k3_clks 77 0>; - clock-names = "gpio"; + cpts@39000000 { + compatible = "ti,j721e-cpts"; + reg = <0x0 0x39000000 0x0 0x400>; + reg-names = "cpts"; + power-domains = <&k3_pds 84 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 84 0>; + clock-names = "cpts"; + assigned-clocks = <&k3_clks 84 0>; + assigned-clock-parents = <&k3_clks 84 8>; + interrupts = ; + interrupt-names = "cpts"; + ti,cpts-periodic-outputs = <6>; + ti,cpts-ext-ts-inputs = <8>; }; usbss0: cdns-usb@f900000{ - compatible = "ti,am64-usb", "ti,j721e-usb"; + compatible = "ti,am64-usb"; reg = <0x00 0xf900000 0x00 0x100>; power-domains = <&k3_pds 161 TI_SCI_PD_EXCLUSIVE>; clocks = <&k3_clks 161 9>, <&k3_clks 161 1>; @@ -537,69 +588,275 @@ }; }; - main_gpio1: gpio@601000 { - compatible = "ti,j721e-gpio", "ti,keystone-gpio"; - reg = <0x00 0x00601000 0x00 0x100>; - gpio-controller; - #gpio-cells = <2>; - interrupts = <78 0 IRQ_TYPE_EDGE_RISING>, - <78 1 IRQ_TYPE_EDGE_RISING>, - <78 2 IRQ_TYPE_EDGE_RISING>, - <78 3 IRQ_TYPE_EDGE_RISING>, - <78 4 IRQ_TYPE_EDGE_RISING>, - <78 5 IRQ_TYPE_EDGE_RISING>, - <78 6 IRQ_TYPE_EDGE_RISING>, - <78 7 IRQ_TYPE_EDGE_RISING>; - interrupt-controller; - #interrupt-cells = <2>; - ti,ngpio = <69>; - ti,davinci-gpio-unbanked = <0>; - power-domains = <&k3_pds 78 TI_SCI_PD_EXCLUSIVE>; - clocks = <&k3_clks 78 0>; - clock-names = "gpio"; + tscadc0: tscadc@28001000 { + compatible = "ti,am654-tscadc", "ti,am3359-tscadc"; + reg = <0x00 0x28001000 0x00 0x1000>; + interrupts = ; + power-domains = <&k3_pds 0 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 0 0>; + assigned-clocks = <&k3_clks 0 0>; + assigned-clock-parents = <&k3_clks 0 3>; + assigned-clock-rates = <60000000>; + clock-names = "adc_tsc_fck"; + + adc { + #io-channel-cells = <1>; + compatible = "ti,am654-adc", "ti,am3359-adc"; + }; }; - main_i2c0: i2c@20000000 { - compatible = "ti,am64-i2c", "ti,omap4-i2c"; - reg = <0x0 0x20000000 0x0 0x100>; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - clock-names = "fck"; - clocks = <&k3_clks 102 2>; - power-domains = <&k3_pds 102 TI_SCI_PD_EXCLUSIVE>; + fss: bus@fc00000 { + compatible = "simple-bus"; + reg = <0x00 0x0fc00000 0x00 0x70000>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + ospi0: spi@fc40000 { + compatible = "ti,am654-ospi", "cdns,qspi-nor"; + reg = <0x00 0x0fc40000 0x00 0x100>, + <0x05 0x00000000 0x01 0x00000000>; + interrupts = ; + cdns,fifo-depth = <256>; + cdns,fifo-width = <4>; + cdns,trigger-address = <0x0>; + #address-cells = <0x1>; + #size-cells = <0x0>; + clocks = <&k3_clks 75 6>; + assigned-clocks = <&k3_clks 75 6>; + assigned-clock-parents = <&k3_clks 75 7>; + assigned-clock-rates = <166666666>; + power-domains = <&k3_pds 75 TI_SCI_PD_EXCLUSIVE>; + }; }; - main_i2c1: i2c@20010000 { - compatible = "ti,am64-i2c", "ti,omap4-i2c"; - reg = <0x0 0x20010000 0x0 0x100>; - interrupts = ; + hwspinlock: spinlock@2a000000 { + compatible = "ti,am64-hwspinlock"; + reg = <0x00 0x2a000000 0x00 0x1000>; + #hwlock-cells = <1>; + }; + + mailbox0_cluster2: mailbox@29020000 { + compatible = "ti,am64-mailbox"; + reg = <0x00 0x29020000 0x00 0x200>; + interrupts = , + ; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <16>; + }; + + mailbox0_cluster3: mailbox@29030000 { + compatible = "ti,am64-mailbox"; + reg = <0x00 0x29030000 0x00 0x200>; + interrupts = , + ; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <16>; + }; + + mailbox0_cluster4: mailbox@29040000 { + compatible = "ti,am64-mailbox"; + reg = <0x00 0x29040000 0x00 0x200>; + interrupts = , + ; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <16>; + }; + + mailbox0_cluster5: mailbox@29050000 { + compatible = "ti,am64-mailbox"; + reg = <0x00 0x29050000 0x00 0x200>; + interrupts = , + ; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <16>; + }; + + mailbox0_cluster6: mailbox@29060000 { + compatible = "ti,am64-mailbox"; + reg = <0x00 0x29060000 0x00 0x200>; + interrupts = ; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <16>; + }; + + mailbox0_cluster7: mailbox@29070000 { + compatible = "ti,am64-mailbox"; + reg = <0x00 0x29070000 0x00 0x200>; + interrupts = ; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <16>; + }; + + main_r5fss0: r5fss@78000000 { + compatible = "ti,am64-r5fss"; + ti,cluster-mode = <0>; #address-cells = <1>; - #size-cells = <0>; - clock-names = "fck"; - clocks = <&k3_clks 103 2>; - power-domains = <&k3_pds 103 TI_SCI_PD_EXCLUSIVE>; + #size-cells = <1>; + ranges = <0x78000000 0x00 0x78000000 0x10000>, + <0x78100000 0x00 0x78100000 0x10000>, + <0x78200000 0x00 0x78200000 0x08000>, + <0x78300000 0x00 0x78300000 0x08000>; + power-domains = <&k3_pds 119 TI_SCI_PD_EXCLUSIVE>; + + main_r5fss0_core0: r5f@78000000 { + compatible = "ti,am64-r5f"; + reg = <0x78000000 0x00010000>, + <0x78100000 0x00010000>; + reg-names = "atcm", "btcm"; + ti,sci = <&dmsc>; + ti,sci-dev-id = <121>; + ti,sci-proc-ids = <0x01 0xff>; + resets = <&k3_reset 121 1>; + firmware-name = "am64-main-r5f0_0-fw"; + ti,atcm-enable = <1>; + ti,btcm-enable = <1>; + ti,loczrama = <1>; + }; + + main_r5fss0_core1: r5f@78200000 { + compatible = "ti,am64-r5f"; + reg = <0x78200000 0x00008000>, + <0x78300000 0x00008000>; + reg-names = "atcm", "btcm"; + ti,sci = <&dmsc>; + ti,sci-dev-id = <122>; + ti,sci-proc-ids = <0x02 0xff>; + resets = <&k3_reset 122 1>; + firmware-name = "am64-main-r5f0_1-fw"; + ti,atcm-enable = <1>; + ti,btcm-enable = <1>; + ti,loczrama = <1>; + }; }; - main_i2c2: i2c@20020000 { - compatible = "ti,am64-i2c", "ti,omap4-i2c"; - reg = <0x00 0x20020000 0x0 0x100>; - interrupts = ; + main_r5fss1: r5fss@78400000 { + compatible = "ti,am64-r5fss"; + ti,cluster-mode = <0>; #address-cells = <1>; - #size-cells = <0>; - clock-names = "fck"; - clocks = <&k3_clks 104 2>; - power-domains = <&k3_pds 104 TI_SCI_PD_EXCLUSIVE>; + #size-cells = <1>; + ranges = <0x78400000 0x00 0x78400000 0x10000>, + <0x78500000 0x00 0x78500000 0x10000>, + <0x78600000 0x00 0x78600000 0x08000>, + <0x78700000 0x00 0x78700000 0x08000>; + power-domains = <&k3_pds 120 TI_SCI_PD_EXCLUSIVE>; + + main_r5fss1_core0: r5f@78400000 { + compatible = "ti,am64-r5f"; + reg = <0x78400000 0x00010000>, + <0x78500000 0x00010000>; + reg-names = "atcm", "btcm"; + ti,sci = <&dmsc>; + ti,sci-dev-id = <123>; + ti,sci-proc-ids = <0x06 0xff>; + resets = <&k3_reset 123 1>; + firmware-name = "am64-main-r5f1_0-fw"; + ti,atcm-enable = <1>; + ti,btcm-enable = <1>; + ti,loczrama = <1>; + }; + + main_r5fss1_core1: r5f@78600000 { + compatible = "ti,am64-r5f"; + reg = <0x78600000 0x00008000>, + <0x78700000 0x00008000>; + reg-names = "atcm", "btcm"; + ti,sci = <&dmsc>; + ti,sci-dev-id = <124>; + ti,sci-proc-ids = <0x07 0xff>; + resets = <&k3_reset 124 1>; + firmware-name = "am64-main-r5f1_1-fw"; + ti,atcm-enable = <1>; + ti,btcm-enable = <1>; + ti,loczrama = <1>; + }; }; - main_i2c3: i2c@20030000 { - compatible = "ti,am64-i2c", "ti,omap4-i2c"; - reg = <0x00 0x20030000 0x0 0x100>; - interrupts = ; + serdes_wiz0: wiz@f000000 { + compatible = "ti,am64-wiz-10g"; #address-cells = <1>; - #size-cells = <0>; + #size-cells = <1>; + power-domains = <&k3_pds 162 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 162 0>, <&k3_clks 162 1>, <&serdes_refclk>; + clock-names = "fck", "core_ref_clk", "ext_ref_clk"; + num-lanes = <1>; + #reset-cells = <1>; + #clock-cells = <1>; + ranges = <0x0f000000 0x0 0x0f000000 0x00010000>; + + assigned-clocks = <&k3_clks 162 1>; + assigned-clock-parents = <&k3_clks 162 5>; + + serdes0: serdes@f000000 { + compatible = "ti,j721e-serdes-10g"; + reg = <0x0f000000 0x00010000>; + reg-names = "torrent_phy"; + resets = <&serdes_wiz0 0>; + reset-names = "torrent_reset"; + clocks = <&serdes_wiz0 TI_WIZ_PLL0_REFCLK>, + <&serdes_wiz0 TI_WIZ_PHY_EN_REFCLK>; + clock-names = "refclk", "phy_en_refclk"; + assigned-clocks = <&serdes_wiz0 TI_WIZ_PLL0_REFCLK>, + <&serdes_wiz0 TI_WIZ_PLL1_REFCLK>, + <&serdes_wiz0 TI_WIZ_REFCLK_DIG>; + assigned-clock-parents = <&k3_clks 162 1>, + <&k3_clks 162 1>, + <&k3_clks 162 1>; + #address-cells = <1>; + #size-cells = <0>; + #clock-cells = <1>; + }; + }; + + pcie0_rc: pcie@f102000 { + compatible = "ti,am64-pcie-host", "ti,j721e-pcie-host"; + reg = <0x00 0x0f102000 0x00 0x1000>, + <0x00 0x0f100000 0x00 0x400>, + <0x00 0x0d000000 0x00 0x00800000>, + <0x00 0x68000000 0x00 0x00001000>; + reg-names = "intd_cfg", "user_cfg", "reg", "cfg"; + interrupt-names = "link_state"; + interrupts = ; + device_type = "pci"; + ti,syscon-pcie-ctrl = <&main_conf 0x4070>; + max-link-speed = <2>; + num-lanes = <1>; + power-domains = <&k3_pds 114 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 114 0>, <&serdes0 CDNS_TORRENT_REFCLK_DRIVER>; + clock-names = "fck", "pcie_refclk"; + #address-cells = <3>; + #size-cells = <2>; + bus-range = <0x0 0xff>; + cdns,no-bar-match-nbits = <64>; + vendor-id = <0x104c>; + device-id = <0xb010>; + msi-map = <0x0 &gic_its 0x0 0x10000>; + ranges = <0x01000000 0x00 0x68001000 0x00 0x68001000 0x00 0x0010000>, + <0x02000000 0x00 0x68011000 0x00 0x68011000 0x00 0x7fef000>; + dma-ranges = <0x02000000 0x0 0x0 0x0 0x0 0x00000010 0x0>; + }; + + pcie0_ep: pcie-ep@f102000 { + compatible = "ti,am64-pcie-ep", "ti,j721e-pcie-ep"; + reg = <0x00 0x0f102000 0x00 0x1000>, + <0x00 0x0f100000 0x00 0x400>, + <0x00 0x0d000000 0x00 0x00800000>, + <0x00 0x68000000 0x00 0x08000000>; + reg-names = "intd_cfg", "user_cfg", "reg", "mem"; + interrupt-names = "link_state"; + interrupts = ; + ti,syscon-pcie-ctrl = <&main_conf 0x4070>; + max-link-speed = <2>; + num-lanes = <1>; + power-domains = <&k3_pds 114 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 114 0>; clock-names = "fck"; - clocks = <&k3_clks 105 2>; - power-domains = <&k3_pds 105 TI_SCI_PD_EXCLUSIVE>; + max-functions = /bits/ 8 <1>; }; }; diff --git a/arch/arm/dts/k3-am64-mcu.dtsi b/arch/arm/dts/k3-am64-mcu.dtsi index 1d2be485a6..59cc58f7d0 100644 --- a/arch/arm/dts/k3-am64-mcu.dtsi +++ b/arch/arm/dts/k3-am64-mcu.dtsi @@ -9,8 +9,6 @@ mcu_uart0: serial@4a00000 { compatible = "ti,am64-uart", "ti,am654-uart"; reg = <0x00 0x04a00000 0x00 0x100>; - reg-shift = <2>; - reg-io-width = <4>; interrupts = ; clock-frequency = <48000000>; current-speed = <115200>; @@ -22,8 +20,6 @@ mcu_uart1: serial@4a10000 { compatible = "ti,am64-uart", "ti,am654-uart"; reg = <0x00 0x04a10000 0x00 0x100>; - reg-shift = <2>; - reg-io-width = <4>; interrupts = ; clock-frequency = <48000000>; current-speed = <115200>; @@ -73,4 +69,32 @@ power-domains = <&k3_pds 148 TI_SCI_PD_EXCLUSIVE>; clocks = <&k3_clks 148 0>; }; + + mcu_gpio_intr: interrupt-controller@4210000 { + compatible = "ti,sci-intr"; + reg = <0x00 0x04210000 0x00 0x200>; + ti,intr-trigger-type = <1>; + interrupt-controller; + interrupt-parent = <&gic500>; + #interrupt-cells = <1>; + ti,sci = <&dmsc>; + ti,sci-dev-id = <5>; + ti,interrupt-ranges = <0 104 4>; + }; + + mcu_gpio0: gpio@4201000 { + compatible = "ti,am64-gpio", "ti,keystone-gpio"; + reg = <0x0 0x4201000 0x0 0x100>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&mcu_gpio_intr>; + interrupts = <30>, <31>; + interrupt-controller; + #interrupt-cells = <2>; + ti,ngpio = <23>; + ti,davinci-gpio-unbanked = <0>; + power-domains = <&k3_pds 79 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 79 0>; + clock-names = "gpio"; + }; }; diff --git a/arch/arm/dts/k3-am64.dtsi b/arch/arm/dts/k3-am64.dtsi index 6b2d0803b4..de6805b0c7 100644 --- a/arch/arm/dts/k3-am64.dtsi +++ b/arch/arm/dts/k3-am64.dtsi @@ -28,8 +28,6 @@ serial6 = &main_uart4; serial7 = &main_uart5; serial8 = &main_uart6; - i2c0 = &main_i2c0; - i2c1 = &main_i2c1; ethernet0 = &cpsw_port1; ethernet1 = &cpsw_port2; }; diff --git a/arch/arm/dts/k3-am642-evm.dts b/arch/arm/dts/k3-am642-evm.dts index 3a505d22c6..0307122211 100644 --- a/arch/arm/dts/k3-am642-evm.dts +++ b/arch/arm/dts/k3-am642-evm.dts @@ -5,6 +5,8 @@ /dts-v1/; +#include +#include #include #include #include @@ -36,6 +38,60 @@ alignment = <0x1000>; no-map; }; + + main_r5fss0_core0_dma_memory_region: r5f-dma-memory@a0000000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa0000000 0x00 0x100000>; + no-map; + }; + + main_r5fss0_core0_memory_region: r5f-memory@a0100000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa0100000 0x00 0xf00000>; + no-map; + }; + + main_r5fss0_core1_dma_memory_region: r5f-dma-memory@a1000000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa1000000 0x00 0x100000>; + no-map; + }; + + main_r5fss0_core1_memory_region: r5f-memory@a1100000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa1100000 0x00 0xf00000>; + no-map; + }; + + main_r5fss1_core0_dma_memory_region: r5f-dma-memory@a2000000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa2000000 0x00 0x100000>; + no-map; + }; + + main_r5fss1_core0_memory_region: r5f-memory@a2100000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa2100000 0x00 0xf00000>; + no-map; + }; + + main_r5fss1_core1_dma_memory_region: r5f-dma-memory@a3000000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa3000000 0x00 0x100000>; + no-map; + }; + + main_r5fss1_core1_memory_region: r5f-memory@a3100000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa3100000 0x00 0xf00000>; + no-map; + }; + + rtos_ipc_memory_region: ipc-memories@a5000000 { + reg = <0x00 0xa5000000 0x00 0x00800000>; + alignment = <0x1000>; + no-map; + }; }; evm_12v0: fixedregulator-evm12v0 { @@ -154,6 +210,15 @@ >; }; + main_spi0_pins_default: main-spi0-pins-default { + pinctrl-single,pins = < + AM64X_IOPAD(0x0210, PIN_INPUT, 0) /* (D13) SPI0_CLK */ + AM64X_IOPAD(0x0208, PIN_OUTPUT, 0) /* (D12) SPI0_CS0 */ + AM64X_IOPAD(0x0214, PIN_OUTPUT, 0) /* (A13) SPI0_D0 */ + AM64X_IOPAD(0x0218, PIN_INPUT, 0) /* (A14) SPI0_D1 */ + >; + }; + main_i2c1_pins_default: main-i2c1-pins-default { pinctrl-single,pins = < AM64X_IOPAD(0x0268, PIN_INPUT_PULLUP, 0) /* (C18) I2C1_SCL */ @@ -207,6 +272,22 @@ AM64X_IOPAD(0x02a8, PIN_OUTPUT, 0) /* (E19) USB0_DRVVBUS */ >; }; + + ospi0_pins_default: ospi0-pins-default { + pinctrl-single,pins = < + AM64X_IOPAD(0x0000, PIN_OUTPUT, 0) /* (N20) OSPI0_CLK */ + AM64X_IOPAD(0x002c, PIN_OUTPUT, 0) /* (L19) OSPI0_CSn0 */ + AM64X_IOPAD(0x000c, PIN_INPUT, 0) /* (M19) OSPI0_D0 */ + AM64X_IOPAD(0x0010, PIN_INPUT, 0) /* (M18) OSPI0_D1 */ + AM64X_IOPAD(0x0014, PIN_INPUT, 0) /* (M20) OSPI0_D2 */ + AM64X_IOPAD(0x0018, PIN_INPUT, 0) /* (M21) OSPI0_D3 */ + AM64X_IOPAD(0x001c, PIN_INPUT, 0) /* (P21) OSPI0_D4 */ + AM64X_IOPAD(0x0020, PIN_INPUT, 0) /* (P20) OSPI0_D5 */ + AM64X_IOPAD(0x0024, PIN_INPUT, 0) /* (N18) OSPI0_D6 */ + AM64X_IOPAD(0x0028, PIN_INPUT, 0) /* (M17) OSPI0_D7 */ + AM64X_IOPAD(0x0008, PIN_INPUT, 0) /* (N19) OSPI0_DQS */ + >; + }; }; &main_uart0 { @@ -285,6 +366,11 @@ }; }; +/* mcu_gpio0 is reserved for mcu firmware usage */ +&mcu_gpio0 { + status = "reserved"; +}; + &mcu_i2c0 { status = "disabled"; }; @@ -301,28 +387,16 @@ status = "disabled"; }; -&cpsw3g { +&main_spi0 { pinctrl-names = "default"; - pinctrl-0 = <&mdio1_pins_default - &rgmii1_pins_default - &rgmii2_pins_default>; -}; - -&cpsw_port1 { - phy-mode = "rgmii-rxid"; - phy-handle = <&cpsw3g_phy0>; -}; - -&cpsw_port2 { - phy-mode = "rgmii-rxid"; - phy-handle = <&cpsw3g_phy3>; -}; - -&cpsw3g_mdio { - cpsw3g_phy0: ethernet-phy@0 { + pinctrl-0 = <&main_spi0_pins_default>; + ti,pindir-d0-out-d1-in; + eeprom@0 { + compatible = "microchip,93lc46b"; reg = <0>; - ti,rx-internal-delay = ; - ti,fifo-depth = ; + spi-max-frequency = <1000000>; + spi-cs-high; + data-size = <16>; }; }; @@ -355,3 +429,148 @@ pinctrl-names = "default"; pinctrl-0 = <&main_usb0_pins_default>; }; + +&cpsw3g { + pinctrl-names = "default"; + pinctrl-0 = <&mdio1_pins_default + &rgmii1_pins_default + &rgmii2_pins_default>; +}; + +&cpsw_port1 { + phy-mode = "rgmii-rxid"; + phy-handle = <&cpsw3g_phy0>; +}; + +&cpsw_port2 { + phy-mode = "rgmii-rxid"; + phy-handle = <&cpsw3g_phy3>; +}; + +&cpsw3g_mdio { + cpsw3g_phy0: ethernet-phy@0 { + reg = <0>; + ti,rx-internal-delay = ; + ti,fifo-depth = ; + }; +}; + +&tscadc0 { + /* ADC is reserved for R5 usage */ + status = "reserved"; +}; + +&ospi0 { + pinctrl-names = "default"; + pinctrl-0 = <&ospi0_pins_default>; + + flash@0{ + compatible = "jedec,spi-nor"; + reg = <0x0>; + spi-tx-bus-width = <8>; + spi-rx-bus-width = <8>; + spi-max-frequency = <25000000>; + cdns,tshsl-ns = <60>; + cdns,tsd2d-ns = <60>; + cdns,tchsh-ns = <60>; + cdns,tslch-ns = <60>; + cdns,read-delay = <4>; + #address-cells = <1>; + #size-cells = <1>; + }; +}; + +&mailbox0_cluster2 { + mbox_main_r5fss0_core0: mbox-main-r5fss0-core0 { + ti,mbox-rx = <0 0 2>; + ti,mbox-tx = <1 0 2>; + }; + + mbox_main_r5fss0_core1: mbox-main-r5fss0-core1 { + ti,mbox-rx = <2 0 2>; + ti,mbox-tx = <3 0 2>; + }; +}; + +&mailbox0_cluster3 { + status = "disabled"; +}; + +&mailbox0_cluster4 { + mbox_main_r5fss1_core0: mbox-main-r5fss1-core0 { + ti,mbox-rx = <0 0 2>; + ti,mbox-tx = <1 0 2>; + }; + + mbox_main_r5fss1_core1: mbox-main-r5fss1-core1 { + ti,mbox-rx = <2 0 2>; + ti,mbox-tx = <3 0 2>; + }; +}; + +&mailbox0_cluster5 { + status = "disabled"; +}; + +&mailbox0_cluster6 { + mbox_m4_0: mbox-m4-0 { + ti,mbox-rx = <0 0 2>; + ti,mbox-tx = <1 0 2>; + }; +}; + +&mailbox0_cluster7 { + status = "disabled"; +}; + +&main_r5fss0_core0 { + mboxes = <&mailbox0_cluster2 &mbox_main_r5fss0_core0>; + memory-region = <&main_r5fss0_core0_dma_memory_region>, + <&main_r5fss0_core0_memory_region>; +}; + +&main_r5fss0_core1 { + mboxes = <&mailbox0_cluster2 &mbox_main_r5fss0_core1>; + memory-region = <&main_r5fss0_core1_dma_memory_region>, + <&main_r5fss0_core1_memory_region>; +}; + +&main_r5fss1_core0 { + mboxes = <&mailbox0_cluster4 &mbox_main_r5fss1_core0>; + memory-region = <&main_r5fss1_core0_dma_memory_region>, + <&main_r5fss1_core0_memory_region>; +}; + +&main_r5fss1_core1 { + mboxes = <&mailbox0_cluster4 &mbox_main_r5fss1_core1>; + memory-region = <&main_r5fss1_core1_dma_memory_region>, + <&main_r5fss1_core1_memory_region>; +}; + +&serdes_ln_ctrl { + idle-states = ; +}; + +&serdes0 { + serdes0_pcie_link: phy@0 { + reg = <0>; + cdns,num-lanes = <1>; + #phy-cells = <0>; + cdns,phy-type = ; + resets = <&serdes_wiz0 1>; + }; +}; + +&pcie0_rc { + reset-gpios = <&exp1 5 GPIO_ACTIVE_HIGH>; + phys = <&serdes0_pcie_link>; + phy-names = "pcie-phy"; + num-lanes = <1>; +}; + +&pcie0_ep { + phys = <&serdes0_pcie_link>; + phy-names = "pcie-phy"; + num-lanes = <1>; + status = "disabled"; +}; diff --git a/arch/arm/dts/k3-am642-sk.dts b/arch/arm/dts/k3-am642-sk.dts index df76c6e0b9..d3aa2901e6 100644 --- a/arch/arm/dts/k3-am642-sk.dts +++ b/arch/arm/dts/k3-am642-sk.dts @@ -5,6 +5,8 @@ /dts-v1/; +#include +#include #include #include #include "k3-am642.dtsi" @@ -35,6 +37,93 @@ alignment = <0x1000>; no-map; }; + + main_r5fss0_core0_dma_memory_region: r5f-dma-memory@a0000000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa0000000 0x00 0x100000>; + no-map; + }; + + main_r5fss0_core0_memory_region: r5f-memory@a0100000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa0100000 0x00 0xf00000>; + no-map; + }; + + main_r5fss0_core1_dma_memory_region: r5f-dma-memory@a1000000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa1000000 0x00 0x100000>; + no-map; + }; + + main_r5fss0_core1_memory_region: r5f-memory@a1100000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa1100000 0x00 0xf00000>; + no-map; + }; + + main_r5fss1_core0_dma_memory_region: r5f-dma-memory@a2000000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa2000000 0x00 0x100000>; + no-map; + }; + + main_r5fss1_core0_memory_region: r5f-memory@a2100000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa2100000 0x00 0xf00000>; + no-map; + }; + + main_r5fss1_core1_dma_memory_region: r5f-dma-memory@a3000000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa3000000 0x00 0x100000>; + no-map; + }; + + main_r5fss1_core1_memory_region: r5f-memory@a3100000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa3100000 0x00 0xf00000>; + no-map; + }; + + rtos_ipc_memory_region: ipc-memories@a5000000 { + reg = <0x00 0xa5000000 0x00 0x00800000>; + alignment = <0x1000>; + no-map; + }; + }; + + vusb_main: fixed-regulator-vusb-main5v0 { + /* USB MAIN INPUT 5V DC */ + compatible = "regulator-fixed"; + regulator-name = "vusb_main5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; + + vcc_3v3_sys: fixedregulator-vcc-3v3-sys { + /* output of LP8733xx */ + compatible = "regulator-fixed"; + regulator-name = "vcc_3v3_sys"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vusb_main>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_mmc1: fixed-regulator-sd { + /* TPS2051BD */ + compatible = "regulator-fixed"; + regulator-name = "vdd_mmc1"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + enable-active-high; + vin-supply = <&vcc_3v3_sys>; + gpio = <&exp1 3 GPIO_ACTIVE_HIGH>; }; }; @@ -52,6 +141,12 @@ >; }; + main_usb0_pins_default: main-usb0-pins-default { + pinctrl-single,pins = < + AM64X_IOPAD(0x02a8, PIN_OUTPUT, 0) /* (E19) USB0_DRVVBUS */ + >; + }; + main_i2c1_pins_default: main-i2c1-pins-default { pinctrl-single,pins = < AM64X_IOPAD(0x0268, PIN_INPUT_PULLUP, 0) /* (C18) I2C1_SCL */ @@ -99,6 +194,30 @@ AM64X_IOPAD(0x0144, PIN_OUTPUT, 4) /* (Y11) PRG1_PRU1_GPO15.RGMII2_TX_CTL */ >; }; + + ospi0_pins_default: ospi0-pins-default { + pinctrl-single,pins = < + AM64X_IOPAD(0x0000, PIN_OUTPUT, 0) /* (N20) OSPI0_CLK */ + AM64X_IOPAD(0x002c, PIN_OUTPUT, 0) /* (L19) OSPI0_CSn0 */ + AM64X_IOPAD(0x000c, PIN_INPUT, 0) /* (M19) OSPI0_D0 */ + AM64X_IOPAD(0x0010, PIN_INPUT, 0) /* (M18) OSPI0_D1 */ + AM64X_IOPAD(0x0014, PIN_INPUT, 0) /* (M20) OSPI0_D2 */ + AM64X_IOPAD(0x0018, PIN_INPUT, 0) /* (M21) OSPI0_D3 */ + AM64X_IOPAD(0x001c, PIN_INPUT, 0) /* (P21) OSPI0_D4 */ + AM64X_IOPAD(0x0020, PIN_INPUT, 0) /* (P20) OSPI0_D5 */ + AM64X_IOPAD(0x0024, PIN_INPUT, 0) /* (N18) OSPI0_D6 */ + AM64X_IOPAD(0x0028, PIN_INPUT, 0) /* (M17) OSPI0_D7 */ + AM64X_IOPAD(0x0008, PIN_INPUT, 0) /* (N19) OSPI0_DQS */ + >; + }; +}; + +&mcu_uart0 { + status = "disabled"; +}; + +&mcu_uart1 { + status = "disabled"; }; &main_uart1 { @@ -126,8 +245,51 @@ status = "disabled"; }; +&mcu_i2c0 { + status = "disabled"; +}; + +&mcu_i2c1 { + status = "disabled"; +}; + +&main_i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&main_i2c1_pins_default>; + clock-frequency = <400000>; + + exp1: gpio@70 { + compatible = "nxp,pca9538"; + reg = <0x70>; + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = "GPIO_CPSW2_RST", "GPIO_CPSW1_RST", + "PRU_DETECT", "MMC1_SD_EN", + "VPP_LDO_EN", "RPI_PS_3V3_En", + "RPI_PS_5V0_En", "RPI_HAT_DETECT"; + }; +}; + +&main_i2c3 { + status = "disabled"; +}; + +&mcu_spi0 { + status = "disabled"; +}; + +&mcu_spi1 { + status = "disabled"; +}; + +/* mcu_gpio0 is reserved for mcu firmware usage */ +&mcu_gpio0 { + status = "reserved"; +}; + &sdhci1 { /* SD/MMC */ + vmmc-supply = <&vdd_mmc1>; pinctrl-names = "default"; bus-width = <4>; pinctrl-0 = <&main_mmc1_pins_default>; @@ -135,6 +297,33 @@ disable-wp; }; +&serdes_ln_ctrl { + idle-states = ; +}; + +&serdes0 { + serdes0_usb_link: phy@0 { + reg = <0>; + cdns,num-lanes = <1>; + #phy-cells = <0>; + cdns,phy-type = ; + resets = <&serdes_wiz0 1>; + }; +}; + +&usbss0 { + ti,vbus-divider; +}; + +&usb0 { + dr_mode = "host"; + maximum-speed = "super-speed"; + pinctrl-names = "default"; + pinctrl-0 = <&main_usb0_pins_default>; + phys = <&serdes0_usb_link>; + phy-names = "cdns3,usb3-phy"; +}; + &cpsw3g { pinctrl-names = "default"; pinctrl-0 = <&mdio1_pins_default @@ -147,10 +336,120 @@ phy-handle = <&cpsw3g_phy0>; }; +&cpsw_port2 { + phy-mode = "rgmii-rxid"; + phy-handle = <&cpsw3g_phy1>; +}; + &cpsw3g_mdio { cpsw3g_phy0: ethernet-phy@0 { reg = <0>; ti,rx-internal-delay = ; ti,fifo-depth = ; }; + + cpsw3g_phy1: ethernet-phy@1 { + reg = <1>; + ti,rx-internal-delay = ; + ti,fifo-depth = ; + }; +}; + +&tscadc0 { + status = "disabled"; +}; + +&ospi0 { + pinctrl-names = "default"; + pinctrl-0 = <&ospi0_pins_default>; + + flash@0{ + compatible = "jedec,spi-nor"; + reg = <0x0>; + spi-tx-bus-width = <8>; + spi-rx-bus-width = <8>; + spi-max-frequency = <25000000>; + cdns,tshsl-ns = <60>; + cdns,tsd2d-ns = <60>; + cdns,tchsh-ns = <60>; + cdns,tslch-ns = <60>; + cdns,read-delay = <4>; + #address-cells = <1>; + #size-cells = <1>; + }; +}; + +&mailbox0_cluster2 { + mbox_main_r5fss0_core0: mbox-main-r5fss0-core0 { + ti,mbox-rx = <0 0 2>; + ti,mbox-tx = <1 0 2>; + }; + + mbox_main_r5fss0_core1: mbox-main-r5fss0-core1 { + ti,mbox-rx = <2 0 2>; + ti,mbox-tx = <3 0 2>; + }; +}; + +&mailbox0_cluster3 { + status = "disabled"; +}; + +&mailbox0_cluster4 { + mbox_main_r5fss1_core0: mbox-main-r5fss1-core0 { + ti,mbox-rx = <0 0 2>; + ti,mbox-tx = <1 0 2>; + }; + + mbox_main_r5fss1_core1: mbox-main-r5fss1-core1 { + ti,mbox-rx = <2 0 2>; + ti,mbox-tx = <3 0 2>; + }; +}; + +&mailbox0_cluster5 { + status = "disabled"; +}; + +&mailbox0_cluster6 { + mbox_m4_0: mbox-m4-0 { + ti,mbox-rx = <0 0 2>; + ti,mbox-tx = <1 0 2>; + }; +}; + +&mailbox0_cluster7 { + status = "disabled"; +}; + +&main_r5fss0_core0 { + mboxes = <&mailbox0_cluster2 &mbox_main_r5fss0_core0>; + memory-region = <&main_r5fss0_core0_dma_memory_region>, + <&main_r5fss0_core0_memory_region>; +}; + +&main_r5fss0_core1 { + mboxes = <&mailbox0_cluster2 &mbox_main_r5fss0_core1>; + memory-region = <&main_r5fss0_core1_dma_memory_region>, + <&main_r5fss0_core1_memory_region>; +}; + +&main_r5fss1_core0 { + mboxes = <&mailbox0_cluster4 &mbox_main_r5fss1_core0>; + memory-region = <&main_r5fss1_core0_dma_memory_region>, + <&main_r5fss1_core0_memory_region>; +}; + +&main_r5fss1_core1 { + mboxes = <&mailbox0_cluster4 &mbox_main_r5fss1_core1>; + memory-region = <&main_r5fss1_core1_dma_memory_region>, + <&main_r5fss1_core1_memory_region>; +}; + +&pcie0_rc { + status = "disabled"; +}; + +&pcie0_ep { + status = "disabled"; }; diff --git a/arch/arm/dts/k3-am65-main.dtsi b/arch/arm/dts/k3-am65-main.dtsi index 669484b0dd..ba4e5d3e1e 100644 --- a/arch/arm/dts/k3-am65-main.dtsi +++ b/arch/arm/dts/k3-am65-main.dtsi @@ -84,8 +84,6 @@ main_uart0: serial@2800000 { compatible = "ti,am654-uart"; reg = <0x00 0x02800000 0x00 0x100>; - reg-shift = <2>; - reg-io-width = <4>; interrupts = ; clock-frequency = <48000000>; current-speed = <115200>; @@ -95,8 +93,6 @@ main_uart1: serial@2810000 { compatible = "ti,am654-uart"; reg = <0x00 0x02810000 0x00 0x100>; - reg-shift = <2>; - reg-io-width = <4>; interrupts = ; clock-frequency = <48000000>; power-domains = <&k3_pds 147 TI_SCI_PD_EXCLUSIVE>; @@ -105,8 +101,6 @@ main_uart2: serial@2820000 { compatible = "ti,am654-uart"; reg = <0x00 0x02820000 0x00 0x100>; - reg-shift = <2>; - reg-io-width = <4>; interrupts = ; clock-frequency = <48000000>; power-domains = <&k3_pds 148 TI_SCI_PD_EXCLUSIVE>; @@ -256,7 +250,7 @@ #size-cells = <0>; }; - sdhci0: sdhci@4f80000 { + sdhci0: mmc@4f80000 { compatible = "ti,am654-sdhci-5.1"; reg = <0x0 0x4f80000 0x0 0x260>, <0x0 0x4f90000 0x0 0x134>; power-domains = <&k3_pds 47 TI_SCI_PD_EXCLUSIVE>; @@ -271,21 +265,16 @@ ti,otap-del-sel-sdr12 = <0x0>; ti,otap-del-sel-sdr25 = <0x0>; ti,otap-del-sel-sdr50 = <0x8>; - ti,otap-del-sel-sdr104 = <0x5>; + ti,otap-del-sel-sdr104 = <0x7>; ti,otap-del-sel-ddr50 = <0x5>; ti,otap-del-sel-ddr52 = <0x5>; ti,otap-del-sel-hs200 = <0x5>; ti,otap-del-sel-hs400 = <0x0>; - ti,itap-del-sel-legacy = <0xa>; - ti,itap-del-sel-mmc-hs = <0x1>; - ti,itap-del-sel-sdr12 = <0xa>; - ti,itap-del-sel-sdr25 = <0x1>; - ti,clkbuf-sel = <0x7>; ti,trm-icp = <0x8>; dma-coherent; }; - sdhci1: sdhci@4fa0000 { + sdhci1: mmc@4fa0000 { compatible = "ti,am654-sdhci-5.1"; reg = <0x0 0x4fa0000 0x0 0x260>, <0x0 0x4fb0000 0x0 0x134>; power-domains = <&k3_pds 48 TI_SCI_PD_EXCLUSIVE>; @@ -302,11 +291,8 @@ ti,otap-del-sel-ddr50 = <0x4>; ti,otap-del-sel-ddr52 = <0x4>; ti,otap-del-sel-hs200 = <0x7>; - ti,itap-del-sel-legacy = <0xa>; - ti,itap-del-sel-mmc-hs = <0x1>; - ti,itap-del-sel-sdr12 = <0xa>; - ti,itap-del-sel-sdr25 = <0x1>; ti,clkbuf-sel = <0x7>; + ti,otap-del-sel = <0x2>; ti,trm-icp = <0x8>; dma-coherent; }; @@ -440,8 +426,9 @@ #phy-cells = <0>; }; - intr_main_gpio: interrupt-controller0 { + intr_main_gpio: interrupt-controller@a00000 { compatible = "ti,sci-intr"; + reg = <0x0 0x00a00000 0x0 0x400>; ti,intr-trigger-type = <1>; interrupt-controller; interrupt-parent = <&gic500>; @@ -451,18 +438,19 @@ ti,interrupt-ranges = <0 392 32>; }; - main-navss { + main_navss: bus@30800000 { compatible = "simple-mfd"; #address-cells = <2>; #size-cells = <2>; - ranges; + ranges = <0x0 0x30800000 0x0 0x30800000 0x0 0xbc00000>; dma-coherent; dma-ranges; ti,sci-dev-id = <118>; - intr_main_navss: interrupt-controller1 { + intr_main_navss: interrupt-controller@310e0000 { compatible = "ti,sci-intr"; + reg = <0x0 0x310e0000 0x0 0x2000>; ti,intr-trigger-type = <4>; interrupt-controller; interrupt-parent = <&gic500>; @@ -714,6 +702,7 @@ dma-coherent; interrupts = ; msi-map = <0x0 &gic_its 0x0 0x10000>; + device_type = "pci"; }; pcie0_ep: pcie-ep@5500000 { @@ -746,6 +735,7 @@ dma-coherent; interrupts = ; msi-map = <0x0 &gic_its 0x10000 0x10000>; + device_type = "pci"; }; pcie1_ep: pcie-ep@5600000 { @@ -974,18 +964,6 @@ }; }; - icssg0_iep0: iep@2e000 { - compatible = "ti,am654-icss-iep"; - reg = <0x2e000 0x1000>; - clocks = <&icssg0_iepclk_mux>; - }; - - icssg0_iep1: iep@2f000 { - compatible = "ti,am654-icss-iep"; - reg = <0x2f000 0x1000>; - clocks = <&icssg0_iepclk_mux>; - }; - icssg0_mii_rt: mii-rt@32000 { compatible = "ti,pruss-mii", "syscon"; reg = <0x32000 0x100>; @@ -1077,7 +1055,6 @@ #address-cells = <1>; #size-cells = <0>; bus_freq = <1000000>; - status = "disabled"; }; }; @@ -1128,18 +1105,6 @@ }; }; - icssg1_iep0: iep@2e000 { - compatible = "ti,am654-icss-iep"; - reg = <0x2e000 0x1000>; - clocks = <&icssg1_iepclk_mux>; - }; - - icssg1_iep1: iep@2f000 { - compatible = "ti,am654-icss-iep"; - reg = <0x2f000 0x1000>; - clocks = <&icssg1_iepclk_mux>; - }; - icssg1_mii_rt: mii-rt@32000 { compatible = "ti,pruss-mii", "syscon"; reg = <0x32000 0x100>; @@ -1231,7 +1196,6 @@ #address-cells = <1>; #size-cells = <0>; bus_freq = <1000000>; - status = "disabled"; }; }; @@ -1282,18 +1246,6 @@ }; }; - icssg2_iep0: iep@2e000 { - compatible = "ti,am654-icss-iep"; - reg = <0x2e000 0x1000>; - clocks = <&icssg2_iepclk_mux>; - }; - - icssg2_iep1: iep@2f000 { - compatible = "ti,am654-icss-iep"; - reg = <0x2f000 0x1000>; - clocks = <&icssg2_iepclk_mux>; - }; - icssg2_mii_rt: mii-rt@32000 { compatible = "ti,pruss-mii", "syscon"; reg = <0x32000 0x100>; @@ -1385,8 +1337,6 @@ #address-cells = <1>; #size-cells = <0>; bus_freq = <1000000>; - status = "disabled"; }; }; - }; diff --git a/arch/arm/dts/k3-am65-mcu.dtsi b/arch/arm/dts/k3-am65-mcu.dtsi index 7454c8cec0..c93ff1520a 100644 --- a/arch/arm/dts/k3-am65-mcu.dtsi +++ b/arch/arm/dts/k3-am65-mcu.dtsi @@ -23,8 +23,6 @@ mcu_uart0: serial@40a00000 { compatible = "ti,am654-uart"; reg = <0x00 0x40a00000 0x00 0x100>; - reg-shift = <2>; - reg-io-width = <4>; interrupts = ; clock-frequency = <96000000>; current-speed = <115200>; @@ -116,11 +114,11 @@ }; }; - mcu-navss { + mcu_navss: bus@28380000 { compatible = "simple-mfd"; #address-cells = <2>; #size-cells = <2>; - ranges; + ranges = <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>; dma-coherent; dma-ranges; @@ -308,4 +306,13 @@ ti,loczrama = <1>; }; }; + + mcu_rti1: watchdog@40610000 { + compatible = "ti,j7-rti-wdt"; + reg = <0x0 0x40610000 0x0 0x100>; + clocks = <&k3_clks 135 0>; + power-domains = <&k3_pds 135 TI_SCI_PD_SHARED>; + assigned-clocks = <&k3_clks 135 0>; + assigned-clock-parents = <&k3_clks 135 4>; + }; }; diff --git a/arch/arm/dts/k3-am65-wakeup.dtsi b/arch/arm/dts/k3-am65-wakeup.dtsi index ed42f13e76..9d21cdf6fc 100644 --- a/arch/arm/dts/k3-am65-wakeup.dtsi +++ b/arch/arm/dts/k3-am65-wakeup.dtsi @@ -6,24 +6,24 @@ */ &cbass_wakeup { - dmsc: dmsc { + dmsc: system-controller@44083000 { compatible = "ti,am654-sci"; ti,host-id = <12>; - #address-cells = <1>; - #size-cells = <1>; - ranges; mbox-names = "rx", "tx"; mboxes= <&secure_proxy_main 11>, <&secure_proxy_main 13>; + reg-names = "debug_messages"; + reg = <0x44083000 0x1000>; + k3_pds: power-controller { compatible = "ti,sci-pm-domain"; #power-domain-cells = <2>; }; - k3_clks: clocks { + k3_clks: clock-controller { compatible = "ti,k2g-sci-clk"; #clock-cells = <2>; }; @@ -50,8 +50,6 @@ wkup_uart0: serial@42300000 { compatible = "ti,am654-uart"; reg = <0x42300000 0x100>; - reg-shift = <2>; - reg-io-width = <4>; interrupts = ; clock-frequency = <48000000>; current-speed = <115200>; @@ -69,8 +67,9 @@ power-domains = <&k3_pds 115 TI_SCI_PD_EXCLUSIVE>; }; - intr_wkup_gpio: interrupt-controller2 { + intr_wkup_gpio: interrupt-controller@42200000 { compatible = "ti,sci-intr"; + reg = <0x42200000 0x200>; ti,intr-trigger-type = <1>; interrupt-controller; interrupt-parent = <&gic500>; diff --git a/arch/arm/dts/k3-am65.dtsi b/arch/arm/dts/k3-am65.dtsi index d84c0bc050..a9fc1af03f 100644 --- a/arch/arm/dts/k3-am65.dtsi +++ b/arch/arm/dts/k3-am65.dtsi @@ -56,7 +56,7 @@ }; pmu: pmu { - compatible = "arm,armv8-pmuv3"; + compatible = "arm,cortex-a53-pmu"; /* Recommendation from GIC500 TRM Table A.3 */ interrupts = ; }; diff --git a/arch/arm/dts/k3-am654-base-board.dts b/arch/arm/dts/k3-am654-base-board.dts index 7b2cdaf7dc..cfbcebfa37 100644 --- a/arch/arm/dts/k3-am654-base-board.dts +++ b/arch/arm/dts/k3-am654-base-board.dts @@ -86,10 +86,36 @@ }; }; - clk_ov5640_fixed: clock { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <24000000>; + evm_12v0: fixedregulator-evm12v0 { + /* main supply */ + compatible = "regulator-fixed"; + regulator-name = "evm_12v0"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + regulator-always-on; + regulator-boot-on; + }; + + vcc3v3_io: fixedregulator-vcc3v3io { + /* Output of TPS54334 */ + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_io"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&evm_12v0>; + }; + + vdd_mmc1_sd: fixedregulator-sd { + compatible = "regulator-fixed"; + regulator-name = "vdd_mmc1_sd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + enable-active-high; + vin-supply = <&vcc3v3_io>; + gpio = <&pca9554 4 GPIO_ACTIVE_HIGH>; }; }; @@ -142,7 +168,7 @@ AM65X_WKUP_IOPAD(0x007c, PIN_INPUT, 0) /* (L5) MCU_RGMII1_RD2 */ AM65X_WKUP_IOPAD(0x0080, PIN_INPUT, 0) /* (M6) MCU_RGMII1_RD1 */ AM65X_WKUP_IOPAD(0x0084, PIN_INPUT, 0) /* (L6) MCU_RGMII1_RD0 */ - AM65X_WKUP_IOPAD(0x0070, PIN_INPUT, 0) /* (N1) MCU_RGMII1_TXC */ + AM65X_WKUP_IOPAD(0x0070, PIN_OUTPUT, 0) /* (N1) MCU_RGMII1_TXC */ AM65X_WKUP_IOPAD(0x0074, PIN_INPUT, 0) /* (M1) MCU_RGMII1_RXC */ >; }; @@ -287,23 +313,6 @@ pinctrl-names = "default"; pinctrl-0 = <&main_i2c1_pins_default>; clock-frequency = <400000>; - - ov5640: camera@3c { - compatible = "ovti,ov5640"; - reg = <0x3c>; - - clocks = <&clk_ov5640_fixed>; - clock-names = "xclk"; - - port { - csi2_cam0: endpoint { - remote-endpoint = <&csi2_phy0>; - clock-lanes = <0>; - data-lanes = <1 2>; - }; - }; - }; - }; &main_i2c2 { @@ -322,7 +331,7 @@ pinctrl-0 = <&main_spi0_pins_default>; #address-cells = <1>; #size-cells= <0>; - ti,pindir-d0-out-d1-in = <1>; + ti,pindir-d0-out-d1-in; flash@0{ compatible = "jedec,spi-nor"; @@ -350,10 +359,10 @@ * disable sdhci1 */ &sdhci1 { + vmmc-supply = <&vdd_mmc1_sd>; pinctrl-names = "default"; pinctrl-0 = <&main_mmc1_pins_default>; ti,driver-strength-ohm = <50>; - sdhci-caps-mask = <0x7 0x0>; disable-wp; }; @@ -484,9 +493,9 @@ flash@0{ compatible = "jedec,spi-nor"; reg = <0x0>; - spi-tx-bus-width = <1>; + spi-tx-bus-width = <8>; spi-rx-bus-width = <8>; - spi-max-frequency = <40000000>; + spi-max-frequency = <25000000>; cdns,tshsl-ns = <60>; cdns,tsd2d-ns = <60>; cdns,tchsh-ns = <60>; @@ -497,14 +506,6 @@ }; }; -&csi2_0 { - csi2_phy0: endpoint { - remote-endpoint = <&csi2_cam0>; - clock-lanes = <0>; - data-lanes = <1 2>; - }; -}; - &mcu_cpsw { pinctrl-names = "default"; pinctrl-0 = <&mcu_cpsw_pins_default &mcu_mdio_pins_default>; @@ -538,3 +539,15 @@ &dss { status = "disabled"; }; + +&icssg0_mdio { + status = "disabled"; +}; + +&icssg1_mdio { + status = "disabled"; +}; + +&icssg2_mdio { + status = "disabled"; +}; diff --git a/arch/arm/dts/k3-am654-r5-base-board-u-boot.dtsi b/arch/arm/dts/k3-am654-r5-base-board-u-boot.dtsi index 0f6df5b34b..26567f4167 100644 --- a/arch/arm/dts/k3-am654-r5-base-board-u-boot.dtsi +++ b/arch/arm/dts/k3-am654-r5-base-board-u-boot.dtsi @@ -23,7 +23,7 @@ &cbass_main{ u-boot,dm-spl; - main-navss { + main_navss: bus@30800000 { u-boot,dm-spl; }; }; @@ -31,7 +31,7 @@ &cbass_mcu { u-boot,dm-spl; - mcu-navss { + mcu_navss: bus@28380000 { u-boot,dm-spl; ringacc@2b800000 { diff --git a/arch/arm/dts/k3-j7200-common-proc-board-u-boot.dtsi b/arch/arm/dts/k3-j7200-common-proc-board-u-boot.dtsi index 8a3f1891e2..1544c2e51b 100644 --- a/arch/arm/dts/k3-j7200-common-proc-board-u-boot.dtsi +++ b/arch/arm/dts/k3-j7200-common-proc-board-u-boot.dtsi @@ -41,7 +41,7 @@ u-boot,dm-spl; }; - mcu-navss{ + mcu_navss: bus@28380000 { u-boot,dm-spl; #address-cells = <2>; #size-cells = <2>; @@ -118,10 +118,6 @@ u-boot,dm-spl; }; -&wkup_i2c0_pins_default { - u-boot,dm-spl; -}; - &wkup_i2c0 { u-boot,dm-spl; }; @@ -165,10 +161,6 @@ u-boot,dm-spl; }; -&wkup_gpio_pins_default { - u-boot,dm-spl; -}; - &mcu_fss0_hpb0_pins_default { u-boot,dm-spl; }; diff --git a/arch/arm/dts/k3-j7200-common-proc-board.dts b/arch/arm/dts/k3-j7200-common-proc-board.dts index f0440cda1a..d14f3c18b6 100644 --- a/arch/arm/dts/k3-j7200-common-proc-board.dts +++ b/arch/arm/dts/k3-j7200-common-proc-board.dts @@ -17,51 +17,67 @@ bootargs = "console=ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000"; }; - aliases { - remoteproc0 = &mcu_r5fss0_core0; - remoteproc1 = &mcu_r5fss0_core1; - remoteproc2 = &main_r5fss0_core0; - remoteproc3 = &main_r5fss0_core1; + evm_12v0: fixedregulator-evm12v0 { + /* main supply */ + compatible = "regulator-fixed"; + regulator-name = "evm_12v0"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + regulator-always-on; + regulator-boot-on; + }; + + vsys_3v3: fixedregulator-vsys3v3 { + /* Output of LM5140 */ + compatible = "regulator-fixed"; + regulator-name = "vsys_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&evm_12v0>; + regulator-always-on; + regulator-boot-on; + }; + + vsys_5v0: fixedregulator-vsys5v0 { + /* Output of LM5140 */ + compatible = "regulator-fixed"; + regulator-name = "vsys_5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&evm_12v0>; + regulator-always-on; + regulator-boot-on; }; vdd_mmc1: fixedregulator-sd { + /* Output of TPS22918 */ compatible = "regulator-fixed"; regulator-name = "vdd_mmc1"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-boot-on; enable-active-high; + vin-supply = <&vsys_3v3>; gpio = <&exp2 2 GPIO_ACTIVE_HIGH>; }; - vdd_sd_dv: gpio-regulator-vdd-sd-dv { + vdd_sd_dv: gpio-regulator-TLV71033 { + /* Output of TLV71033 */ compatible = "regulator-gpio"; - regulator-name = "vdd_sd_dv"; + regulator-name = "tlv71033"; pinctrl-names = "default"; pinctrl-0 = <&vdd_sd_dv_pins_default>; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; regulator-boot-on; + vin-supply = <&vsys_5v0>; gpios = <&main_gpio0 55 GPIO_ACTIVE_HIGH>; - states = <1800000 0x0 - 3300000 0x1>; + states = <1800000 0x0>, + <3300000 0x1>; }; }; &wkup_pmx0 { - wkup_i2c0_pins_default: wkup-i2c0-pins-default { - pinctrl-single,pins = < - J721E_WKUP_IOPAD(0x100, PIN_INPUT_PULLUP, 0) /* (F20) WKUP_I2C0_SCL */ - J721E_WKUP_IOPAD(0x104, PIN_INPUT_PULLUP, 0) /* (H21) WKUP_I2C0_SDA */ - >; - }; - - wkup_gpio_pins_default: wkup-gpio-pins-default { - pinctrl-single,pins = < - J721E_WKUP_IOPAD(0xd8, PIN_INPUT, 7) /* (C14) WKUP_GPIO0_6 */ - >; - }; - mcu_cpsw_pins_default: mcu-cpsw-pins-default { pinctrl-single,pins = < J721E_WKUP_IOPAD(0x0068, PIN_OUTPUT, 0) /* MCU_RGMII1_TX_CTL */ @@ -74,7 +90,7 @@ J721E_WKUP_IOPAD(0x008c, PIN_INPUT, 0) /* MCU_RGMII1_RD2 */ J721E_WKUP_IOPAD(0x0090, PIN_INPUT, 0) /* MCU_RGMII1_RD1 */ J721E_WKUP_IOPAD(0x0094, PIN_INPUT, 0) /* MCU_RGMII1_RD0 */ - J721E_WKUP_IOPAD(0x0080, PIN_INPUT, 0) /* MCU_RGMII1_TXC */ + J721E_WKUP_IOPAD(0x0080, PIN_OUTPUT, 0) /* MCU_RGMII1_TXC */ J721E_WKUP_IOPAD(0x0084, PIN_INPUT, 0) /* MCU_RGMII1_RXC */ >; }; @@ -115,15 +131,15 @@ >; }; - vdd_sd_dv_pins_default: vdd_sd_dv_pins_default { + main_usbss0_pins_default: main-usbss0-pins-default { pinctrl-single,pins = < - J721E_IOPAD(0xd0, PIN_OUTPUT, 7) /* (T5) SPI0_D1.GPIO0_55 */ + J721E_IOPAD(0x120, PIN_OUTPUT, 0) /* (T4) USB0_DRVVBUS */ >; }; - main_usbss0_pins_default: main-usbss0-pins-default { + vdd_sd_dv_pins_default: vdd-sd-dv-pins-default { pinctrl-single,pins = < - J721E_IOPAD(0x120, PIN_OUTPUT, 0) /* (T4) USB0_DRVVBUS */ + J721E_IOPAD(0xd0, PIN_OUTPUT, 7) /* (T5) SPI0_D1.GPIO0_55 */ >; }; }; @@ -178,6 +194,22 @@ status = "disabled"; }; +&main_gpio2 { + status = "disabled"; +}; + +&main_gpio4 { + status = "disabled"; +}; + +&main_gpio6 { + status = "disabled"; +}; + +&wkup_gpio1 { + status = "disabled"; +}; + &mcu_cpsw { pinctrl-names = "default"; pinctrl-0 = <&mcu_cpsw_pins_default &mcu_mdio_pins_default>; @@ -288,7 +320,7 @@ }; &serdes0 { - serdes0_pcie_link: link@0 { + serdes0_pcie_link: phy@0 { reg = <0>; cdns,num-lanes = <2>; #phy-cells = <0>; @@ -296,7 +328,7 @@ resets = <&serdes_wiz0 1>, <&serdes_wiz0 2>; }; - serdes0_qsgmii_link: link@1 { + serdes0_qsgmii_link: phy@1 { reg = <2>; cdns,num-lanes = <1>; #phy-cells = <0>; @@ -304,3 +336,17 @@ resets = <&serdes_wiz0 3>; }; }; + +&pcie1_rc { + reset-gpios = <&exp1 2 GPIO_ACTIVE_HIGH>; + phys = <&serdes0_pcie_link>; + phy-names = "pcie-phy"; + num-lanes = <2>; +}; + +&pcie1_ep { + phys = <&serdes0_pcie_link>; + phy-names = "pcie-phy"; + num-lanes = <2>; + status = "disabled"; +}; diff --git a/arch/arm/dts/k3-j7200-main.dtsi b/arch/arm/dts/k3-j7200-main.dtsi index e1d43acc85..e8a41d09b4 100644 --- a/arch/arm/dts/k3-j7200-main.dtsi +++ b/arch/arm/dts/k3-j7200-main.dtsi @@ -2,7 +2,7 @@ /* * Device Tree Source for J7200 SoC Family Main Domain peripherals * - * Copyright (C) 2020 Texas Instruments Incorporated - https://www.ti.com/ + * Copyright (C) 2020-2021 Texas Instruments Incorporated - https://www.ti.com/ */ / { @@ -68,8 +68,9 @@ }; }; - main_gpio_intr: interrupt-controller0 { + main_gpio_intr: interrupt-controller@a00000 { compatible = "ti,sci-intr"; + reg = <0x00 0x00a00000 0x00 0x800>; ti,intr-trigger-type = <1>; interrupt-controller; interrupt-parent = <&gic500>; @@ -85,9 +86,12 @@ #size-cells = <2>; ranges = <0x00 0x30000000 0x00 0x30000000 0x00 0x0c400000>; ti,sci-dev-id = <199>; + dma-coherent; + dma-ranges; - main_navss_intr: interrupt-controller1 { + main_navss_intr: interrupt-controller@310e0000 { compatible = "ti,sci-intr"; + reg = <0x00 0x310e0000 0x00 0x4000>; ti,intr-trigger-type = <4>; interrupt-controller; interrupt-parent = <&gic500>; @@ -297,8 +301,6 @@ main_uart0: serial@2800000 { compatible = "ti,j721e-uart", "ti,am654-uart"; reg = <0x00 0x02800000 0x00 0x100>; - reg-shift = <2>; - reg-io-width = <4>; interrupts = ; clock-frequency = <48000000>; current-speed = <115200>; @@ -310,8 +312,6 @@ main_uart1: serial@2810000 { compatible = "ti,j721e-uart", "ti,am654-uart"; reg = <0x00 0x02810000 0x00 0x100>; - reg-shift = <2>; - reg-io-width = <4>; interrupts = ; clock-frequency = <48000000>; current-speed = <115200>; @@ -323,8 +323,6 @@ main_uart2: serial@2820000 { compatible = "ti,j721e-uart", "ti,am654-uart"; reg = <0x00 0x02820000 0x00 0x100>; - reg-shift = <2>; - reg-io-width = <4>; interrupts = ; clock-frequency = <48000000>; current-speed = <115200>; @@ -336,8 +334,6 @@ main_uart3: serial@2830000 { compatible = "ti,j721e-uart", "ti,am654-uart"; reg = <0x00 0x02830000 0x00 0x100>; - reg-shift = <2>; - reg-io-width = <4>; interrupts = ; clock-frequency = <48000000>; current-speed = <115200>; @@ -349,8 +345,6 @@ main_uart4: serial@2840000 { compatible = "ti,j721e-uart", "ti,am654-uart"; reg = <0x00 0x02840000 0x00 0x100>; - reg-shift = <2>; - reg-io-width = <4>; interrupts = ; clock-frequency = <48000000>; current-speed = <115200>; @@ -362,8 +356,6 @@ main_uart5: serial@2850000 { compatible = "ti,j721e-uart", "ti,am654-uart"; reg = <0x00 0x02850000 0x00 0x100>; - reg-shift = <2>; - reg-io-width = <4>; interrupts = ; clock-frequency = <48000000>; current-speed = <115200>; @@ -375,8 +367,6 @@ main_uart6: serial@2860000 { compatible = "ti,j721e-uart", "ti,am654-uart"; reg = <0x00 0x02860000 0x00 0x100>; - reg-shift = <2>; - reg-io-width = <4>; interrupts = ; clock-frequency = <48000000>; current-speed = <115200>; @@ -388,8 +378,6 @@ main_uart7: serial@2870000 { compatible = "ti,j721e-uart", "ti,am654-uart"; reg = <0x00 0x02870000 0x00 0x100>; - reg-shift = <2>; - reg-io-width = <4>; interrupts = ; clock-frequency = <48000000>; current-speed = <115200>; @@ -401,8 +389,6 @@ main_uart8: serial@2880000 { compatible = "ti,j721e-uart", "ti,am654-uart"; reg = <0x00 0x02880000 0x00 0x100>; - reg-shift = <2>; - reg-io-width = <4>; interrupts = ; clock-frequency = <48000000>; current-speed = <115200>; @@ -414,8 +400,6 @@ main_uart9: serial@2890000 { compatible = "ti,j721e-uart", "ti,am654-uart"; reg = <0x00 0x02890000 0x00 0x100>; - reg-shift = <2>; - reg-io-width = <4>; interrupts = ; clock-frequency = <48000000>; current-speed = <115200>; @@ -424,53 +408,6 @@ clock-names = "fclk"; }; - main_sdhci0: sdhci@4f80000 { - compatible = "ti,j721e-sdhci-8bit"; - reg = <0x0 0x04f80000 0x0 0x260>, <0x0 0x4f88000 0x0 0x134>; - interrupts = ; - power-domains = <&k3_pds 91 TI_SCI_PD_EXCLUSIVE>; - clock-names = "clk_xin", "clk_ahb"; - clocks = <&k3_clks 91 3>, <&k3_clks 91 0>; - ti,otap-del-sel-legacy = <0x0>; - ti,otap-del-sel-mmc-hs = <0x0>; - ti,otap-del-sel-ddr52 = <0x6>; - ti,otap-del-sel-hs200 = <0x8>; - ti,otap-del-sel-hs400 = <0x5>; - ti,itap-del-sel-legacy = <0x10>; - ti,itap-del-sel-mmc-hs = <0xa>; - ti,strobe-sel = <0x77>; - ti,clkbuf-sel = <0x7>; - ti,trm-icp = <0x8>; - bus-width = <8>; - mmc-hs400-1_8v; - mmc-hs200-1_8v; - mmc-ddr-1_8v; - dma-coherent; - }; - - main_sdhci1: sdhci@4fb0000 { - compatible = "ti,j721e-sdhci-4bit"; - reg = <0x0 0x04fb0000 0x0 0x260>, <0x0 0x4fb8000 0x0 0x134>; - interrupts = ; - power-domains = <&k3_pds 92 TI_SCI_PD_EXCLUSIVE>; - clock-names = "clk_xin", "clk_ahb"; - clocks = <&k3_clks 92 2>, <&k3_clks 92 1>; - ti,otap-del-sel-legacy = <0x0>; - ti,otap-del-sel-sd-hs = <0x0>; - ti,otap-del-sel-sdr12 = <0xf>; - ti,otap-del-sel-sdr25 = <0xf>; - ti,otap-del-sel-sdr50 = <0xc>; - ti,otap-del-sel-sdr104 = <0x5>; - ti,otap-del-sel-ddr50 = <0xc>; - ti,itap-del-sel-legacy = <0x0>; - ti,itap-del-sel-sd-hs = <0x0>; - ti,itap-del-sel-sdr12 = <0x0>; - ti,itap-del-sel-sdr25 = <0x0>; - ti,clkbuf-sel = <0x7>; - ti,trm-icp = <0x8>; - dma-coherent; - }; - main_i2c0: i2c@2000000 { compatible = "ti,j721e-i2c", "ti,omap4-i2c"; reg = <0x00 0x2000000 0x00 0x100>; @@ -548,26 +485,51 @@ power-domains = <&k3_pds 193 TI_SCI_PD_EXCLUSIVE>; }; - main_gpio0: gpio@600000 { - compatible = "ti,j721e-gpio", "ti,keystone-gpio"; - reg = <0x0 0x00600000 0x0 0x100>; - gpio-controller; - #gpio-cells = <2>; - interrupts = <105 0 IRQ_TYPE_EDGE_RISING>, - <105 1 IRQ_TYPE_EDGE_RISING>, - <105 2 IRQ_TYPE_EDGE_RISING>, - <105 3 IRQ_TYPE_EDGE_RISING>, - <105 4 IRQ_TYPE_EDGE_RISING>, - <105 5 IRQ_TYPE_EDGE_RISING>, - <105 6 IRQ_TYPE_EDGE_RISING>, - <105 7 IRQ_TYPE_EDGE_RISING>; - interrupt-controller; - #interrupt-cells = <2>; - ti,ngpio = <69>; - ti,davinci-gpio-unbanked = <0>; - power-domains = <&k3_pds 105 TI_SCI_PD_EXCLUSIVE>; - clocks = <&k3_clks 105 0>; - clock-names = "gpio"; + main_sdhci0: mmc@4f80000 { + compatible = "ti,j7200-sdhci-8bit", "ti,j721e-sdhci-8bit"; + reg = <0x00 0x04f80000 0x00 0x260>, <0x00 0x4f88000 0x00 0x134>; + interrupts = ; + power-domains = <&k3_pds 91 TI_SCI_PD_EXCLUSIVE>; + clock-names = "clk_ahb", "clk_xin"; + clocks = <&k3_clks 91 0>, <&k3_clks 91 3>; + ti,otap-del-sel-legacy = <0x0>; + ti,otap-del-sel-mmc-hs = <0x0>; + ti,otap-del-sel-ddr52 = <0x6>; + ti,otap-del-sel-hs200 = <0x8>; + ti,otap-del-sel-hs400 = <0x5>; + ti,itap-del-sel-legacy = <0x10>; + ti,itap-del-sel-mmc-hs = <0xa>; + ti,strobe-sel = <0x77>; + ti,clkbuf-sel = <0x7>; + ti,trm-icp = <0x8>; + bus-width = <8>; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + mmc-hs400-1_8v; + dma-coherent; + }; + + main_sdhci1: mmc@4fb0000 { + compatible = "ti,j7200-sdhci-4bit", "ti,j721e-sdhci-4bit"; + reg = <0x00 0x04fb0000 0x00 0x260>, <0x00 0x4fb8000 0x00 0x134>; + interrupts = ; + power-domains = <&k3_pds 92 TI_SCI_PD_EXCLUSIVE>; + clock-names = "clk_ahb", "clk_xin"; + clocks = <&k3_clks 92 1>, <&k3_clks 92 2>; + ti,otap-del-sel-legacy = <0x0>; + ti,otap-del-sel-sd-hs = <0x0>; + ti,otap-del-sel-sdr12 = <0xf>; + ti,otap-del-sel-sdr25 = <0xf>; + ti,otap-del-sel-sdr50 = <0xc>; + ti,otap-del-sel-sdr104 = <0x5>; + ti,otap-del-sel-ddr50 = <0xc>; + ti,itap-del-sel-legacy = <0x0>; + ti,itap-del-sel-sd-hs = <0x0>; + ti,itap-del-sel-sdr12 = <0x0>; + ti,itap-del-sel-sdr25 = <0x0>; + ti,clkbuf-sel = <0x7>; + ti,trm-icp = <0x8>; + dma-coherent; }; serdes_wiz0: wiz@5060000 { @@ -626,6 +588,54 @@ }; }; + pcie1_rc: pcie@2910000 { + compatible = "ti,j7200-pcie-host", "ti,j721e-pcie-host"; + reg = <0x00 0x02910000 0x00 0x1000>, + <0x00 0x02917000 0x00 0x400>, + <0x00 0x0d800000 0x00 0x00800000>, + <0x00 0x18000000 0x00 0x00001000>; + reg-names = "intd_cfg", "user_cfg", "reg", "cfg"; + interrupt-names = "link_state"; + interrupts = ; + device_type = "pci"; + ti,syscon-pcie-ctrl = <&scm_conf 0x4074>; + max-link-speed = <3>; + num-lanes = <4>; + power-domains = <&k3_pds 240 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 240 6>; + clock-names = "fck"; + #address-cells = <3>; + #size-cells = <2>; + bus-range = <0x0 0xf>; + cdns,no-bar-match-nbits = <64>; + vendor-id = /bits/ 16 <0x104c>; + device-id = /bits/ 16 <0xb00f>; + msi-map = <0x0 &gic_its 0x0 0x10000>; + dma-coherent; + ranges = <0x01000000 0x0 0x18001000 0x00 0x18001000 0x0 0x0010000>, + <0x02000000 0x0 0x18011000 0x00 0x18011000 0x0 0x7fef000>; + dma-ranges = <0x02000000 0x0 0x0 0x0 0x0 0x10000 0x0>; + }; + + pcie1_ep: pcie-ep@2910000 { + compatible = "ti,j7200-pcie-ep", "ti,j721e-pcie-ep"; + reg = <0x00 0x02910000 0x00 0x1000>, + <0x00 0x02917000 0x00 0x400>, + <0x00 0x0d800000 0x00 0x00800000>, + <0x00 0x18000000 0x00 0x08000000>; + reg-names = "intd_cfg", "user_cfg", "reg", "mem"; + interrupt-names = "link_state"; + interrupts = ; + ti,syscon-pcie-ctrl = <&scm_conf 0x4074>; + max-link-speed = <3>; + num-lanes = <4>; + power-domains = <&k3_pds 240 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 240 6>; + clock-names = "fck"; + max-functions = /bits/ 8 <6>; + dma-coherent; + }; + usbss0: cdns-usb@4104000 { compatible = "ti,j721e-usb"; reg = <0x00 0x4104000 0x00 0x100>; @@ -653,12 +663,81 @@ "otg"; maximum-speed = "super-speed"; dr_mode = "otg"; + cdns,phyrst-a-enable; }; }; + main_gpio0: gpio@600000 { + compatible = "ti,j721e-gpio", "ti,keystone-gpio"; + reg = <0x00 0x00600000 0x00 0x100>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&main_gpio_intr>; + interrupts = <145>, <146>, <147>, <148>, + <149>; + interrupt-controller; + #interrupt-cells = <2>; + ti,ngpio = <69>; + ti,davinci-gpio-unbanked = <0>; + power-domains = <&k3_pds 105 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 105 0>; + clock-names = "gpio"; + }; + + main_gpio2: gpio@610000 { + compatible = "ti,j721e-gpio", "ti,keystone-gpio"; + reg = <0x00 0x00610000 0x00 0x100>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&main_gpio_intr>; + interrupts = <154>, <155>, <156>, <157>, + <158>; + interrupt-controller; + #interrupt-cells = <2>; + ti,ngpio = <69>; + ti,davinci-gpio-unbanked = <0>; + power-domains = <&k3_pds 107 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 107 0>; + clock-names = "gpio"; + }; + + main_gpio4: gpio@620000 { + compatible = "ti,j721e-gpio", "ti,keystone-gpio"; + reg = <0x00 0x00620000 0x00 0x100>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&main_gpio_intr>; + interrupts = <163>, <164>, <165>, <166>, + <167>; + interrupt-controller; + #interrupt-cells = <2>; + ti,ngpio = <69>; + ti,davinci-gpio-unbanked = <0>; + power-domains = <&k3_pds 109 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 109 0>; + clock-names = "gpio"; + }; + + main_gpio6: gpio@630000 { + compatible = "ti,j721e-gpio", "ti,keystone-gpio"; + reg = <0x00 0x00630000 0x00 0x100>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&main_gpio_intr>; + interrupts = <172>, <173>, <174>, <175>, + <176>; + interrupt-controller; + #interrupt-cells = <2>; + ti,ngpio = <69>; + ti,davinci-gpio-unbanked = <0>; + power-domains = <&k3_pds 111 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 111 0>; + clock-names = "gpio"; + }; + main_r5fss0: r5fss@5c00000 { compatible = "ti,j7200-r5fss"; - ti,cluster-mode = <0>; + ti,cluster-mode = <1>; #address-cells = <1>; #size-cells = <1>; ranges = <0x5c00000 0x00 0x5c00000 0x20000>, @@ -672,7 +751,7 @@ reg-names = "atcm", "btcm"; ti,sci = <&dmsc>; ti,sci-dev-id = <245>; - ti,sci-proc-ids = <0x06 0xFF>; + ti,sci-proc-ids = <0x06 0xff>; resets = <&k3_reset 245 1>; firmware-name = "j7200-main-r5f0_0-fw"; ti,atcm-enable = <1>; @@ -687,7 +766,7 @@ reg-names = "atcm", "btcm"; ti,sci = <&dmsc>; ti,sci-dev-id = <246>; - ti,sci-proc-ids = <0x07 0xFF>; + ti,sci-proc-ids = <0x07 0xff>; resets = <&k3_reset 246 1>; firmware-name = "j7200-main-r5f0_1-fw"; ti,atcm-enable = <1>; diff --git a/arch/arm/dts/k3-j7200-mcu-wakeup.dtsi b/arch/arm/dts/k3-j7200-mcu-wakeup.dtsi index ac78d4cb68..1044ec6c4b 100644 --- a/arch/arm/dts/k3-j7200-mcu-wakeup.dtsi +++ b/arch/arm/dts/k3-j7200-mcu-wakeup.dtsi @@ -2,11 +2,11 @@ /* * Device Tree Source for J7200 SoC Family MCU/WAKEUP Domain peripherals * - * Copyright (C) 2020 Texas Instruments Incorporated - https://www.ti.com/ + * Copyright (C) 2020-2021 Texas Instruments Incorporated - https://www.ti.com/ */ &cbass_mcu_wakeup { - dmsc: dmsc@44083000 { + dmsc: system-controller@44083000 { compatible = "ti,k2g-sci"; ti,host-id = <12>; @@ -23,7 +23,7 @@ #power-domain-cells = <2>; }; - k3_clks: clocks { + k3_clks: clock-controller { compatible = "ti,k2g-sci-clk"; #clock-cells = <2>; }; @@ -73,8 +73,6 @@ wkup_uart0: serial@42300000 { compatible = "ti,j721e-uart", "ti,am654-uart"; reg = <0x00 0x42300000 0x00 0x100>; - reg-shift = <2>; - reg-io-width = <4>; interrupts = ; clock-frequency = <48000000>; current-speed = <115200>; @@ -86,8 +84,6 @@ mcu_uart0: serial@40a00000 { compatible = "ti,j721e-uart", "ti,am654-uart"; reg = <0x00 0x40a00000 0x00 0x100>; - reg-shift = <2>; - reg-io-width = <4>; interrupts = ; clock-frequency = <96000000>; current-speed = <115200>; @@ -96,8 +92,9 @@ clock-names = "fclk"; }; - wkup_gpio_intr: interrupt-controller2 { + wkup_gpio_intr: interrupt-controller@42200000 { compatible = "ti,sci-intr"; + reg = <0x00 0x42200000 0x00 0x400>; ti,intr-trigger-type = <1>; interrupt-controller; interrupt-parent = <&gic500>; @@ -107,6 +104,38 @@ ti,interrupt-ranges = <16 960 16>; }; + wkup_gpio0: gpio@42110000 { + compatible = "ti,j721e-gpio", "ti,keystone-gpio"; + reg = <0x00 0x42110000 0x00 0x100>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&wkup_gpio_intr>; + interrupts = <103>, <104>, <105>, <106>, <107>, <108>; + interrupt-controller; + #interrupt-cells = <2>; + ti,ngpio = <85>; + ti,davinci-gpio-unbanked = <0>; + power-domains = <&k3_pds 113 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 113 0>; + clock-names = "gpio"; + }; + + wkup_gpio1: gpio@42100000 { + compatible = "ti,j721e-gpio", "ti,keystone-gpio"; + reg = <0x00 0x42100000 0x00 0x100>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&wkup_gpio_intr>; + interrupts = <112>, <113>, <114>, <115>, <116>, <117>; + interrupt-controller; + #interrupt-cells = <2>; + ti,ngpio = <85>; + ti,davinci-gpio-unbanked = <0>; + power-domains = <&k3_pds 114 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 114 0>; + clock-names = "gpio"; + }; + mcu_navss: bus@28380000 { compatible = "simple-mfd"; #address-cells = <2>; @@ -269,6 +298,23 @@ #size-cells = <1>; mux-controls = <&hbmc_mux 0>; }; + + ospi0: spi@47040000 { + compatible = "ti,am654-ospi", "cdns,qspi-nor"; + reg = <0x0 0x47040000 0x0 0x100>, + <0x5 0x00000000 0x1 0x0000000>; + interrupts = ; + cdns,fifo-depth = <256>; + cdns,fifo-width = <4>; + cdns,trigger-address = <0x0>; + clocks = <&k3_clks 103 0>; + assigned-clocks = <&k3_clks 103 0>; + assigned-clock-parents = <&k3_clks 103 2>; + assigned-clock-rates = <166666666>; + power-domains = <&k3_pds 103 TI_SCI_PD_EXCLUSIVE>; + #address-cells = <1>; + #size-cells = <0>; + }; }; tscadc0: tscadc@40200000 { diff --git a/arch/arm/dts/k3-j7200-som-p0.dtsi b/arch/arm/dts/k3-j7200-som-p0.dtsi index 7b5e9aa032..3472444017 100644 --- a/arch/arm/dts/k3-j7200-som-p0.dtsi +++ b/arch/arm/dts/k3-j7200-som-p0.dtsi @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Copyright (C) 2020 Texas Instruments Incorporated - https://www.ti.com/ + * Copyright (C) 2020-2021 Texas Instruments Incorporated - https://www.ti.com/ */ /dts-v1/; @@ -25,6 +25,60 @@ alignment = <0x1000>; no-map; }; + + mcu_r5fss0_core0_dma_memory_region: r5f-dma-memory@a0000000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa0000000 0x00 0x100000>; + no-map; + }; + + mcu_r5fss0_core0_memory_region: r5f-memory@a0100000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa0100000 0x00 0xf00000>; + no-map; + }; + + mcu_r5fss0_core1_dma_memory_region: r5f-dma-memory@a1000000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa1000000 0x00 0x100000>; + no-map; + }; + + mcu_r5fss0_core1_memory_region: r5f-memory@a1100000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa1100000 0x00 0xf00000>; + no-map; + }; + + main_r5fss0_core0_dma_memory_region: r5f-dma-memory@a2000000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa2000000 0x00 0x100000>; + no-map; + }; + + main_r5fss0_core0_memory_region: r5f-memory@a2100000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa2100000 0x00 0xf00000>; + no-map; + }; + + main_r5fss0_core1_dma_memory_region: r5f-dma-memory@a3000000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa3000000 0x00 0x100000>; + no-map; + }; + + main_r5fss0_core1_memory_region: r5f-memory@a3100000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa3100000 0x00 0xf00000>; + no-map; + }; + + rtos_ipc_memory_region: ipc-memories@a4000000 { + reg = <0x00 0xa4000000 0x00 0x00800000>; + alignment = <0x1000>; + no-map; + }; }; }; @@ -46,6 +100,22 @@ J721E_WKUP_IOPAD(0x28, PIN_INPUT, 1) /* (A7) MCU_OSPI0_D7.MCU_HYPERBUS0_DQ7 */ >; }; + + mcu_fss0_ospi0_pins_default: mcu-fss0-ospi0-pins-default { + pinctrl-single,pins = < + J721E_WKUP_IOPAD(0x0000, PIN_OUTPUT, 0) /* MCU_OSPI0_CLK */ + J721E_WKUP_IOPAD(0x002c, PIN_OUTPUT, 0) /* MCU_OSPI0_CSn0 */ + J721E_WKUP_IOPAD(0x000c, PIN_INPUT, 0) /* MCU_OSPI0_D0 */ + J721E_WKUP_IOPAD(0x0010, PIN_INPUT, 0) /* MCU_OSPI0_D1 */ + J721E_WKUP_IOPAD(0x0014, PIN_INPUT, 0) /* MCU_OSPI0_D2 */ + J721E_WKUP_IOPAD(0x0018, PIN_INPUT, 0) /* MCU_OSPI0_D3 */ + J721E_WKUP_IOPAD(0x001c, PIN_INPUT, 0) /* MCU_OSPI0_D4 */ + J721E_WKUP_IOPAD(0x0020, PIN_INPUT, 0) /* MCU_OSPI0_D5 */ + J721E_WKUP_IOPAD(0x0024, PIN_INPUT, 0) /* MCU_OSPI0_D6 */ + J721E_WKUP_IOPAD(0x0028, PIN_INPUT, 0) /* MCU_OSPI0_D7 */ + J721E_WKUP_IOPAD(0x0008, PIN_INPUT, 0) /* MCU_OSPI0_DQS */ + >; + }; }; &main_pmx0 { @@ -141,6 +211,30 @@ status = "disabled"; }; +&mcu_r5fss0_core0 { + mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core0>; + memory-region = <&mcu_r5fss0_core0_dma_memory_region>, + <&mcu_r5fss0_core0_memory_region>; +}; + +&mcu_r5fss0_core1 { + mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core1>; + memory-region = <&mcu_r5fss0_core1_dma_memory_region>, + <&mcu_r5fss0_core1_memory_region>; +}; + +&main_r5fss0_core0 { + mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core0>; + memory-region = <&main_r5fss0_core0_dma_memory_region>, + <&main_r5fss0_core0_memory_region>; +}; + +&main_r5fss0_core1 { + mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core1>; + memory-region = <&main_r5fss0_core1_dma_memory_region>, + <&main_r5fss0_core1_memory_region>; +}; + &main_i2c0 { pinctrl-names = "default"; pinctrl-0 = <&main_i2c0_pins_default>; @@ -157,3 +251,23 @@ "GPIO_LIN_EN", "CAN_STB"; }; }; + +&ospi0 { + pinctrl-names = "default"; + pinctrl-0 = <&mcu_fss0_ospi0_pins_default>; + + flash@0{ + compatible = "jedec,spi-nor"; + reg = <0x0>; + spi-tx-bus-width = <8>; + spi-rx-bus-width = <8>; + spi-max-frequency = <25000000>; + cdns,tshsl-ns = <60>; + cdns,tsd2d-ns = <60>; + cdns,tchsh-ns = <60>; + cdns,tslch-ns = <60>; + cdns,read-delay = <4>; + #address-cells = <1>; + #size-cells = <1>; + }; +}; diff --git a/arch/arm/dts/k3-j7200.dtsi b/arch/arm/dts/k3-j7200.dtsi index 66169bcf7c..b7005b8031 100644 --- a/arch/arm/dts/k3-j7200.dtsi +++ b/arch/arm/dts/k3-j7200.dtsi @@ -114,7 +114,7 @@ }; pmu: pmu { - compatible = "arm,armv8-pmuv3"; + compatible = "arm,cortex-a72-pmu"; interrupts = ; }; diff --git a/arch/arm/dts/k3-j721e-common-proc-board-u-boot.dtsi b/arch/arm/dts/k3-j721e-common-proc-board-u-boot.dtsi index 85dbf8d2ac..3ca9b5c801 100644 --- a/arch/arm/dts/k3-j721e-common-proc-board-u-boot.dtsi +++ b/arch/arm/dts/k3-j721e-common-proc-board-u-boot.dtsi @@ -34,7 +34,7 @@ &cbass_main{ u-boot,dm-spl; - main-navss { + main_navss: bus@30000000 { u-boot,dm-spl; }; }; @@ -50,7 +50,7 @@ u-boot,dm-spl; }; - mcu-navss { + mcu_navss: bus@28380000 { u-boot,dm-spl; ringacc@2b800000 { diff --git a/arch/arm/dts/k3-j721e-common-proc-board.dts b/arch/arm/dts/k3-j721e-common-proc-board.dts index 60764366e2..8bd02d9e28 100644 --- a/arch/arm/dts/k3-j721e-common-proc-board.dts +++ b/arch/arm/dts/k3-j721e-common-proc-board.dts @@ -9,6 +9,7 @@ #include #include #include +#include / { chosen { @@ -237,7 +238,7 @@ J721E_WKUP_IOPAD(0x007c, PIN_INPUT, 0) /* MCU_RGMII1_RD2 */ J721E_WKUP_IOPAD(0x0080, PIN_INPUT, 0) /* MCU_RGMII1_RD1 */ J721E_WKUP_IOPAD(0x0084, PIN_INPUT, 0) /* MCU_RGMII1_RD0 */ - J721E_WKUP_IOPAD(0x0070, PIN_INPUT, 0) /* MCU_RGMII1_TXC */ + J721E_WKUP_IOPAD(0x0070, PIN_OUTPUT, 0) /* MCU_RGMII1_TXC */ J721E_WKUP_IOPAD(0x0074, PIN_INPUT, 0) /* MCU_RGMII1_RXC */ >; }; @@ -358,7 +359,7 @@ }; &serdes3 { - serdes3_usb_link: link@0 { + serdes3_usb_link: phy@0 { reg = <0>; cdns,num-lanes = <2>; #phy-cells = <0>; @@ -635,8 +636,45 @@ status = "disabled"; }; +&cmn_refclk1 { + clock-frequency = <100000000>; +}; + +&wiz0_pll1_refclk { + assigned-clocks = <&wiz0_pll1_refclk>; + assigned-clock-parents = <&cmn_refclk1>; +}; + +&wiz0_refclk_dig { + assigned-clocks = <&wiz0_refclk_dig>; + assigned-clock-parents = <&cmn_refclk1>; +}; + +&wiz1_pll1_refclk { + assigned-clocks = <&wiz1_pll1_refclk>; + assigned-clock-parents = <&cmn_refclk1>; +}; + +&wiz1_refclk_dig { + assigned-clocks = <&wiz1_refclk_dig>; + assigned-clock-parents = <&cmn_refclk1>; +}; + +&wiz2_pll1_refclk { + assigned-clocks = <&wiz2_pll1_refclk>; + assigned-clock-parents = <&cmn_refclk1>; +}; + +&wiz2_refclk_dig { + assigned-clocks = <&wiz2_refclk_dig>; + assigned-clock-parents = <&cmn_refclk1>; +}; + &serdes0 { - serdes0_pcie_link: link@0 { + assigned-clocks = <&serdes0 CDNS_SIERRA_PLL_CMNLC>; + assigned-clock-parents = <&wiz0_pll1_refclk>; + + serdes0_pcie_link: phy@0 { reg = <0>; cdns,num-lanes = <1>; #phy-cells = <0>; @@ -646,7 +684,10 @@ }; &serdes1 { - serdes1_pcie_link: link@0 { + assigned-clocks = <&serdes1 CDNS_SIERRA_PLL_CMNLC>; + assigned-clock-parents = <&wiz1_pll1_refclk>; + + serdes1_pcie_link: phy@0 { reg = <0>; cdns,num-lanes = <2>; #phy-cells = <0>; @@ -656,7 +697,10 @@ }; &serdes2 { - serdes2_pcie_link: link@0 { + assigned-clocks = <&serdes2 CDNS_SIERRA_PLL_CMNLC>; + assigned-clock-parents = <&wiz2_pll1_refclk>; + + serdes2_pcie_link: phy@0 { reg = <0>; cdns,num-lanes = <2>; #phy-cells = <0>; @@ -718,3 +762,11 @@ &dss { status = "disabled"; }; + +&icssg0_mdio { + status = "disabled"; +}; + +&icssg1_mdio { + status = "disabled"; +}; diff --git a/arch/arm/dts/k3-j721e-main.dtsi b/arch/arm/dts/k3-j721e-main.dtsi index 07b489679e..cf3482376c 100644 --- a/arch/arm/dts/k3-j721e-main.dtsi +++ b/arch/arm/dts/k3-j721e-main.dtsi @@ -8,6 +8,20 @@ #include #include +/ { + cmn_refclk: clock-cmnrefclk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <0>; + }; + + cmn_refclk1: clock-cmnrefclk1 { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <0>; + }; +}; + &cbass_main { msmc_ram: sram@70000000 { compatible = "mmio-sram"; @@ -28,38 +42,6 @@ #size-cells = <1>; ranges = <0x0 0x0 0x00100000 0x1c000>; - pcie0_ctrl: syscon@4070 { - compatible = "ti,j721e-system-controller", "syscon", "simple-mfd"; - reg = <0x00004070 0x4>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x4070 0x4070 0x4>; - }; - - pcie1_ctrl: syscon@4074 { - compatible = "ti,j721e-system-controller", "syscon", "simple-mfd"; - reg = <0x00004074 0x4>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x4074 0x4074 0x4>; - }; - - pcie2_ctrl: syscon@4078 { - compatible = "ti,j721e-system-controller", "syscon", "simple-mfd"; - reg = <0x00004078 0x4>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x4078 0x4078 0x4>; - }; - - pcie3_ctrl: syscon@407c { - compatible = "ti,j721e-system-controller", "syscon", "simple-mfd"; - reg = <0x0000407c 0x4>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x407c 0x407c 0x4>; - }; - serdes_ln_ctrl: mux@4080 { compatible = "mmio-mux"; reg = <0x00004080 0x50>; @@ -108,8 +90,9 @@ }; }; - main_gpio_intr: interrupt-controller0 { + main_gpio_intr: interrupt-controller@a00000 { compatible = "ti,sci-intr"; + reg = <0x00 0x00a00000 0x00 0x800>; ti,intr-trigger-type = <1>; interrupt-controller; interrupt-parent = <&gic500>; @@ -119,18 +102,19 @@ ti,interrupt-ranges = <8 392 56>; }; - main-navss { + main_navss: bus@30000000 { compatible = "simple-mfd"; #address-cells = <2>; #size-cells = <2>; - ranges; + ranges = <0x00 0x30000000 0x00 0x30000000 0x00 0x0c400000>; dma-coherent; dma-ranges; ti,sci-dev-id = <199>; - main_navss_intr: interrupt-controller1 { + main_navss_intr: interrupt-controller@310e0000 { compatible = "ti,sci-intr"; + reg = <0x0 0x310e0000 0x0 0x4000>; ti,intr-trigger-type = <4>; interrupt-controller; interrupt-parent = <&gic500>; @@ -368,24 +352,12 @@ pinctrl-single,function-mask = <0xffffffff>; }; - dummy_cmn_refclk: dummy-cmn-refclk { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <100000000>; - }; - - dummy_cmn_refclk1: dummy-cmn-refclk1 { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <100000000>; - }; - serdes_wiz0: wiz@5000000 { compatible = "ti,j721e-wiz-16g"; #address-cells = <1>; #size-cells = <1>; power-domains = <&k3_pds 292 TI_SCI_PD_EXCLUSIVE>; - clocks = <&k3_clks 292 5>, <&k3_clks 292 11>, <&dummy_cmn_refclk>; + clocks = <&k3_clks 292 5>, <&k3_clks 292 11>, <&cmn_refclk>; clock-names = "fck", "core_ref_clk", "ext_ref_clk"; assigned-clocks = <&k3_clks 292 11>, <&k3_clks 292 0>; assigned-clock-parents = <&k3_clks 292 15>, <&k3_clks 292 4>; @@ -394,21 +366,21 @@ ranges = <0x5000000 0x0 0x5000000 0x10000>; wiz0_pll0_refclk: pll0-refclk { - clocks = <&k3_clks 292 11>, <&dummy_cmn_refclk>; + clocks = <&k3_clks 292 11>, <&cmn_refclk>; #clock-cells = <0>; assigned-clocks = <&wiz0_pll0_refclk>; assigned-clock-parents = <&k3_clks 292 11>; }; wiz0_pll1_refclk: pll1-refclk { - clocks = <&k3_clks 292 0>, <&dummy_cmn_refclk1>; + clocks = <&k3_clks 292 0>, <&cmn_refclk1>; #clock-cells = <0>; assigned-clocks = <&wiz0_pll1_refclk>; assigned-clock-parents = <&k3_clks 292 0>; }; wiz0_refclk_dig: refclk-dig { - clocks = <&k3_clks 292 11>, <&k3_clks 292 0>, <&dummy_cmn_refclk>, <&dummy_cmn_refclk1>; + clocks = <&k3_clks 292 11>, <&k3_clks 292 0>, <&cmn_refclk>, <&cmn_refclk1>; #clock-cells = <0>; assigned-clocks = <&wiz0_refclk_dig>; assigned-clock-parents = <&k3_clks 292 11>; @@ -430,10 +402,13 @@ reg = <0x5000000 0x10000>; #address-cells = <1>; #size-cells = <0>; + #clock-cells = <1>; resets = <&serdes_wiz0 0>; reset-names = "sierra_reset"; - clocks = <&wiz0_cmn_refclk_dig_div>, <&wiz0_cmn_refclk1_dig_div>; - clock-names = "cmn_refclk_dig_div", "cmn_refclk1_dig_div"; + clocks = <&wiz0_cmn_refclk_dig_div>, <&wiz0_cmn_refclk1_dig_div>, + <&wiz0_pll0_refclk>, <&wiz0_pll1_refclk>; + clock-names = "cmn_refclk_dig_div", "cmn_refclk1_dig_div", + "pll0_refclk", "pll1_refclk"; }; }; @@ -442,7 +417,7 @@ #address-cells = <1>; #size-cells = <1>; power-domains = <&k3_pds 293 TI_SCI_PD_EXCLUSIVE>; - clocks = <&k3_clks 293 5>, <&k3_clks 293 13>, <&dummy_cmn_refclk>; + clocks = <&k3_clks 293 5>, <&k3_clks 293 13>, <&cmn_refclk>; clock-names = "fck", "core_ref_clk", "ext_ref_clk"; assigned-clocks = <&k3_clks 293 13>, <&k3_clks 293 0>; assigned-clock-parents = <&k3_clks 293 17>, <&k3_clks 293 4>; @@ -451,21 +426,21 @@ ranges = <0x5010000 0x0 0x5010000 0x10000>; wiz1_pll0_refclk: pll0-refclk { - clocks = <&k3_clks 293 13>, <&dummy_cmn_refclk>; + clocks = <&k3_clks 293 13>, <&cmn_refclk>; #clock-cells = <0>; assigned-clocks = <&wiz1_pll0_refclk>; assigned-clock-parents = <&k3_clks 293 13>; }; wiz1_pll1_refclk: pll1-refclk { - clocks = <&k3_clks 293 0>, <&dummy_cmn_refclk1>; + clocks = <&k3_clks 293 0>, <&cmn_refclk1>; #clock-cells = <0>; assigned-clocks = <&wiz1_pll1_refclk>; assigned-clock-parents = <&k3_clks 293 0>; }; wiz1_refclk_dig: refclk-dig { - clocks = <&k3_clks 293 13>, <&k3_clks 293 0>, <&dummy_cmn_refclk>, <&dummy_cmn_refclk1>; + clocks = <&k3_clks 293 13>, <&k3_clks 293 0>, <&cmn_refclk>, <&cmn_refclk1>; #clock-cells = <0>; assigned-clocks = <&wiz1_refclk_dig>; assigned-clock-parents = <&k3_clks 293 13>; @@ -487,10 +462,13 @@ reg = <0x5010000 0x10000>; #address-cells = <1>; #size-cells = <0>; + #clock-cells = <1>; resets = <&serdes_wiz1 0>; reset-names = "sierra_reset"; - clocks = <&wiz1_cmn_refclk_dig_div>, <&wiz1_cmn_refclk1_dig_div>; - clock-names = "cmn_refclk_dig_div", "cmn_refclk1_dig_div"; + clocks = <&wiz1_cmn_refclk_dig_div>, <&wiz1_cmn_refclk1_dig_div>, + <&wiz1_pll0_refclk>, <&wiz1_pll1_refclk>; + clock-names = "cmn_refclk_dig_div", "cmn_refclk1_dig_div", + "pll0_refclk", "pll1_refclk"; }; }; @@ -499,7 +477,7 @@ #address-cells = <1>; #size-cells = <1>; power-domains = <&k3_pds 294 TI_SCI_PD_EXCLUSIVE>; - clocks = <&k3_clks 294 5>, <&k3_clks 294 11>, <&dummy_cmn_refclk>; + clocks = <&k3_clks 294 5>, <&k3_clks 294 11>, <&cmn_refclk>; clock-names = "fck", "core_ref_clk", "ext_ref_clk"; assigned-clocks = <&k3_clks 294 11>, <&k3_clks 294 0>; assigned-clock-parents = <&k3_clks 294 15>, <&k3_clks 294 4>; @@ -508,21 +486,21 @@ ranges = <0x5020000 0x0 0x5020000 0x10000>; wiz2_pll0_refclk: pll0-refclk { - clocks = <&k3_clks 294 11>, <&dummy_cmn_refclk>; + clocks = <&k3_clks 294 11>, <&cmn_refclk>; #clock-cells = <0>; assigned-clocks = <&wiz2_pll0_refclk>; assigned-clock-parents = <&k3_clks 294 11>; }; wiz2_pll1_refclk: pll1-refclk { - clocks = <&k3_clks 294 0>, <&dummy_cmn_refclk1>; + clocks = <&k3_clks 294 0>, <&cmn_refclk1>; #clock-cells = <0>; assigned-clocks = <&wiz2_pll1_refclk>; assigned-clock-parents = <&k3_clks 294 0>; }; wiz2_refclk_dig: refclk-dig { - clocks = <&k3_clks 294 11>, <&k3_clks 294 0>, <&dummy_cmn_refclk>, <&dummy_cmn_refclk1>; + clocks = <&k3_clks 294 11>, <&k3_clks 294 0>, <&cmn_refclk>, <&cmn_refclk1>; #clock-cells = <0>; assigned-clocks = <&wiz2_refclk_dig>; assigned-clock-parents = <&k3_clks 294 11>; @@ -544,10 +522,13 @@ reg = <0x5020000 0x10000>; #address-cells = <1>; #size-cells = <0>; + #clock-cells = <1>; resets = <&serdes_wiz2 0>; reset-names = "sierra_reset"; - clocks = <&wiz2_cmn_refclk_dig_div>, <&wiz2_cmn_refclk1_dig_div>; - clock-names = "cmn_refclk_dig_div", "cmn_refclk1_dig_div"; + clocks = <&wiz2_cmn_refclk_dig_div>, <&wiz2_cmn_refclk1_dig_div>, + <&wiz2_pll0_refclk>, <&wiz2_pll1_refclk>; + clock-names = "cmn_refclk_dig_div", "cmn_refclk1_dig_div", + "pll0_refclk", "pll1_refclk"; }; }; @@ -556,7 +537,7 @@ #address-cells = <1>; #size-cells = <1>; power-domains = <&k3_pds 295 TI_SCI_PD_EXCLUSIVE>; - clocks = <&k3_clks 295 5>, <&k3_clks 295 9>, <&dummy_cmn_refclk>; + clocks = <&k3_clks 295 5>, <&k3_clks 295 9>, <&cmn_refclk>; clock-names = "fck", "core_ref_clk", "ext_ref_clk"; assigned-clocks = <&k3_clks 295 9>, <&k3_clks 295 0>; assigned-clock-parents = <&k3_clks 295 13>, <&k3_clks 295 4>; @@ -565,21 +546,21 @@ ranges = <0x5030000 0x0 0x5030000 0x10000>; wiz3_pll0_refclk: pll0-refclk { - clocks = <&k3_clks 295 9>, <&dummy_cmn_refclk>; + clocks = <&k3_clks 295 9>, <&cmn_refclk>; #clock-cells = <0>; assigned-clocks = <&wiz3_pll0_refclk>; assigned-clock-parents = <&k3_clks 295 9>; }; wiz3_pll1_refclk: pll1-refclk { - clocks = <&k3_clks 295 0>, <&dummy_cmn_refclk1>; + clocks = <&k3_clks 295 0>, <&cmn_refclk1>; #clock-cells = <0>; assigned-clocks = <&wiz3_pll1_refclk>; assigned-clock-parents = <&k3_clks 295 0>; }; wiz3_refclk_dig: refclk-dig { - clocks = <&k3_clks 295 9>, <&k3_clks 295 0>, <&dummy_cmn_refclk>, <&dummy_cmn_refclk1>; + clocks = <&k3_clks 295 9>, <&k3_clks 295 0>, <&cmn_refclk>, <&cmn_refclk1>; #clock-cells = <0>; assigned-clocks = <&wiz3_refclk_dig>; assigned-clock-parents = <&k3_clks 295 9>; @@ -601,10 +582,13 @@ reg = <0x5030000 0x10000>; #address-cells = <1>; #size-cells = <0>; + #clock-cells = <1>; resets = <&serdes_wiz3 0>; reset-names = "sierra_reset"; - clocks = <&wiz3_cmn_refclk_dig_div>, <&wiz3_cmn_refclk1_dig_div>; - clock-names = "cmn_refclk_dig_div", "cmn_refclk1_dig_div"; + clocks = <&wiz3_cmn_refclk_dig_div>, <&wiz3_cmn_refclk1_dig_div>, + <&wiz3_pll0_refclk>, <&wiz3_pll1_refclk>; + clock-names = "cmn_refclk_dig_div", "cmn_refclk1_dig_div", + "pll0_refclk", "pll1_refclk"; }; }; @@ -618,7 +602,7 @@ interrupt-names = "link_state"; interrupts = ; device_type = "pci"; - ti,syscon-pcie-ctrl = <&pcie0_ctrl>; + ti,syscon-pcie-ctrl = <&scm_conf 0x4070>; max-link-speed = <3>; num-lanes = <2>; power-domains = <&k3_pds 239 TI_SCI_PD_EXCLUSIVE>; @@ -645,13 +629,12 @@ reg-names = "intd_cfg", "user_cfg", "reg", "mem"; interrupt-names = "link_state"; interrupts = ; - ti,syscon-pcie-ctrl = <&pcie0_ctrl>; + ti,syscon-pcie-ctrl = <&scm_conf 0x4070>; max-link-speed = <3>; num-lanes = <2>; power-domains = <&k3_pds 239 TI_SCI_PD_EXCLUSIVE>; clocks = <&k3_clks 239 1>; clock-names = "fck"; - cdns,max-outbound-regions = <16>; max-functions = /bits/ 8 <6>; max-virtual-functions = /bits/ 16 <4 4 4 4 0 0>; dma-coherent; @@ -667,7 +650,7 @@ interrupt-names = "link_state"; interrupts = ; device_type = "pci"; - ti,syscon-pcie-ctrl = <&pcie1_ctrl>; + ti,syscon-pcie-ctrl = <&scm_conf 0x4074>; max-link-speed = <3>; num-lanes = <2>; power-domains = <&k3_pds 240 TI_SCI_PD_EXCLUSIVE>; @@ -694,13 +677,12 @@ reg-names = "intd_cfg", "user_cfg", "reg", "mem"; interrupt-names = "link_state"; interrupts = ; - ti,syscon-pcie-ctrl = <&pcie1_ctrl>; + ti,syscon-pcie-ctrl = <&scm_conf 0x4074>; max-link-speed = <3>; num-lanes = <2>; power-domains = <&k3_pds 240 TI_SCI_PD_EXCLUSIVE>; clocks = <&k3_clks 240 1>; clock-names = "fck"; - cdns,max-outbound-regions = <16>; max-functions = /bits/ 8 <6>; max-virtual-functions = /bits/ 16 <4 4 4 4 0 0>; dma-coherent; @@ -716,7 +698,7 @@ interrupt-names = "link_state"; interrupts = ; device_type = "pci"; - ti,syscon-pcie-ctrl = <&pcie2_ctrl>; + ti,syscon-pcie-ctrl = <&scm_conf 0x4078>; max-link-speed = <3>; num-lanes = <2>; power-domains = <&k3_pds 241 TI_SCI_PD_EXCLUSIVE>; @@ -743,13 +725,12 @@ reg-names = "intd_cfg", "user_cfg", "reg", "mem"; interrupt-names = "link_state"; interrupts = ; - ti,syscon-pcie-ctrl = <&pcie2_ctrl>; + ti,syscon-pcie-ctrl = <&scm_conf 0x4078>; max-link-speed = <3>; num-lanes = <2>; power-domains = <&k3_pds 241 TI_SCI_PD_EXCLUSIVE>; clocks = <&k3_clks 241 1>; clock-names = "fck"; - cdns,max-outbound-regions = <16>; max-functions = /bits/ 8 <6>; max-virtual-functions = /bits/ 16 <4 4 4 4 0 0>; dma-coherent; @@ -765,7 +746,7 @@ interrupt-names = "link_state"; interrupts = ; device_type = "pci"; - ti,syscon-pcie-ctrl = <&pcie3_ctrl>; + ti,syscon-pcie-ctrl = <&scm_conf 0x407c>; max-link-speed = <3>; num-lanes = <2>; power-domains = <&k3_pds 242 TI_SCI_PD_EXCLUSIVE>; @@ -792,13 +773,12 @@ reg-names = "intd_cfg", "user_cfg", "reg", "mem"; interrupt-names = "link_state"; interrupts = ; - ti,syscon-pcie-ctrl = <&pcie3_ctrl>; + ti,syscon-pcie-ctrl = <&scm_conf 0x407c>; max-link-speed = <3>; num-lanes = <2>; power-domains = <&k3_pds 242 TI_SCI_PD_EXCLUSIVE>; clocks = <&k3_clks 242 1>; clock-names = "fck"; - cdns,max-outbound-regions = <16>; max-functions = /bits/ 8 <6>; max-virtual-functions = /bits/ 16 <4 4 4 4 0 0>; dma-coherent; @@ -809,8 +789,6 @@ main_uart0: serial@2800000 { compatible = "ti,j721e-uart", "ti,am654-uart"; reg = <0x00 0x02800000 0x00 0x100>; - reg-shift = <2>; - reg-io-width = <4>; interrupts = ; clock-frequency = <48000000>; current-speed = <115200>; @@ -822,8 +800,6 @@ main_uart1: serial@2810000 { compatible = "ti,j721e-uart", "ti,am654-uart"; reg = <0x00 0x02810000 0x00 0x100>; - reg-shift = <2>; - reg-io-width = <4>; interrupts = ; clock-frequency = <48000000>; current-speed = <115200>; @@ -835,8 +811,6 @@ main_uart2: serial@2820000 { compatible = "ti,j721e-uart", "ti,am654-uart"; reg = <0x00 0x02820000 0x00 0x100>; - reg-shift = <2>; - reg-io-width = <4>; interrupts = ; clock-frequency = <48000000>; current-speed = <115200>; @@ -848,8 +822,6 @@ main_uart3: serial@2830000 { compatible = "ti,j721e-uart", "ti,am654-uart"; reg = <0x00 0x02830000 0x00 0x100>; - reg-shift = <2>; - reg-io-width = <4>; interrupts = ; clock-frequency = <48000000>; current-speed = <115200>; @@ -861,8 +833,6 @@ main_uart4: serial@2840000 { compatible = "ti,j721e-uart", "ti,am654-uart"; reg = <0x00 0x02840000 0x00 0x100>; - reg-shift = <2>; - reg-io-width = <4>; interrupts = ; clock-frequency = <48000000>; current-speed = <115200>; @@ -874,8 +844,6 @@ main_uart5: serial@2850000 { compatible = "ti,j721e-uart", "ti,am654-uart"; reg = <0x00 0x02850000 0x00 0x100>; - reg-shift = <2>; - reg-io-width = <4>; interrupts = ; clock-frequency = <48000000>; current-speed = <115200>; @@ -887,8 +855,6 @@ main_uart6: serial@2860000 { compatible = "ti,j721e-uart", "ti,am654-uart"; reg = <0x00 0x02860000 0x00 0x100>; - reg-shift = <2>; - reg-io-width = <4>; interrupts = ; clock-frequency = <48000000>; current-speed = <115200>; @@ -900,8 +866,6 @@ main_uart7: serial@2870000 { compatible = "ti,j721e-uart", "ti,am654-uart"; reg = <0x00 0x02870000 0x00 0x100>; - reg-shift = <2>; - reg-io-width = <4>; interrupts = ; clock-frequency = <48000000>; current-speed = <115200>; @@ -913,8 +877,6 @@ main_uart8: serial@2880000 { compatible = "ti,j721e-uart", "ti,am654-uart"; reg = <0x00 0x02880000 0x00 0x100>; - reg-shift = <2>; - reg-io-width = <4>; interrupts = ; clock-frequency = <48000000>; current-speed = <115200>; @@ -926,8 +888,6 @@ main_uart9: serial@2890000 { compatible = "ti,j721e-uart", "ti,am654-uart"; reg = <0x00 0x02890000 0x00 0x100>; - reg-shift = <2>; - reg-io-width = <4>; interrupts = ; clock-frequency = <48000000>; current-speed = <115200>; @@ -1068,13 +1028,13 @@ clock-names = "gpio"; }; - main_sdhci0: sdhci@4f80000 { + main_sdhci0: mmc@4f80000 { compatible = "ti,j721e-sdhci-8bit"; reg = <0x0 0x4f80000 0x0 0x1000>, <0x0 0x4f88000 0x0 0x400>; interrupts = ; power-domains = <&k3_pds 91 TI_SCI_PD_EXCLUSIVE>; - clock-names = "clk_xin", "clk_ahb"; - clocks = <&k3_clks 91 1>, <&k3_clks 91 0>; + clock-names = "clk_ahb", "clk_xin"; + clocks = <&k3_clks 91 0>, <&k3_clks 91 1>; assigned-clocks = <&k3_clks 91 1>; assigned-clock-parents = <&k3_clks 91 2>; bus-width = <8>; @@ -1084,24 +1044,26 @@ ti,otap-del-sel-mmc-hs = <0xf>; ti,otap-del-sel-ddr52 = <0x5>; ti,otap-del-sel-hs200 = <0x6>; + ti,otap-del-sel-hs400 = <0x0>; ti,itap-del-sel-legacy = <0x10>; ti,itap-del-sel-mmc-hs = <0xa>; ti,itap-del-sel-ddr52 = <0x3>; ti,trm-icp = <0x8>; + ti,strobe-sel = <0x77>; dma-coherent; }; - main_sdhci1: sdhci@4fb0000 { + main_sdhci1: mmc@4fb0000 { compatible = "ti,j721e-sdhci-4bit"; reg = <0x0 0x04fb0000 0x0 0x1000>, <0x0 0x4fb8000 0x0 0x400>; interrupts = ; power-domains = <&k3_pds 92 TI_SCI_PD_EXCLUSIVE>; - clock-names = "clk_xin", "clk_ahb"; - clocks = <&k3_clks 92 0>, <&k3_clks 92 5>; + clock-names = "clk_ahb", "clk_xin"; + clocks = <&k3_clks 92 5>, <&k3_clks 92 0>; assigned-clocks = <&k3_clks 92 0>; assigned-clock-parents = <&k3_clks 92 1>; ti,otap-del-sel-legacy = <0x0>; - ti,otap-del-sel-sd-hs = <0x0>; + ti,otap-del-sel-sd-hs = <0xf>; ti,otap-del-sel-sdr12 = <0xf>; ti,otap-del-sel-sdr25 = <0xf>; ti,otap-del-sel-sdr50 = <0xc>; @@ -1117,17 +1079,17 @@ sdhci-caps-mask = <0x2 0x0>; }; - main_sdhci2: sdhci@4f98000 { + main_sdhci2: mmc@4f98000 { compatible = "ti,j721e-sdhci-4bit"; reg = <0x0 0x4f98000 0x0 0x1000>, <0x0 0x4f90000 0x0 0x400>; interrupts = ; power-domains = <&k3_pds 93 TI_SCI_PD_EXCLUSIVE>; - clock-names = "clk_xin", "clk_ahb"; - clocks = <&k3_clks 93 0>, <&k3_clks 93 5>; + clock-names = "clk_ahb", "clk_xin"; + clocks = <&k3_clks 93 5>, <&k3_clks 93 0>; assigned-clocks = <&k3_clks 93 0>; assigned-clock-parents = <&k3_clks 93 1>; ti,otap-del-sel-legacy = <0x0>; - ti,otap-del-sel-sd-hs = <0x0>; + ti,otap-del-sel-sd-hs = <0xf>; ti,otap-del-sel-sdr12 = <0xf>; ti,otap-del-sel-sdr25 = <0xf>; ti,otap-del-sel-sdr50 = <0xc>; @@ -1696,4 +1658,286 @@ resets = <&k3_reset 15 1>; firmware-name = "j7-c71_0-fw"; }; + + icssg0: icssg@b000000 { + compatible = "ti,j721e-icssg"; + reg = <0x00 0xb000000 0x00 0x80000>; + power-domains = <&k3_pds 119 TI_SCI_PD_EXCLUSIVE>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x00 0x0b000000 0x100000>; + + icssg0_mem: memories@0 { + reg = <0x0 0x2000>, + <0x2000 0x2000>, + <0x10000 0x10000>; + reg-names = "dram0", "dram1", + "shrdram2"; + }; + + icssg0_cfg: cfg@26000 { + compatible = "ti,pruss-cfg", "syscon"; + reg = <0x26000 0x200>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x26000 0x2000>; + + clocks { + #address-cells = <1>; + #size-cells = <0>; + + icssg0_coreclk_mux: coreclk-mux@3c { + reg = <0x3c>; + #clock-cells = <0>; + clocks = <&k3_clks 119 24>, /* icssg0_core_clk */ + <&k3_clks 119 1>; /* icssg0_iclk */ + assigned-clocks = <&icssg0_coreclk_mux>; + assigned-clock-parents = <&k3_clks 119 1>; + }; + + icssg0_iepclk_mux: iepclk-mux@30 { + reg = <0x30>; + #clock-cells = <0>; + clocks = <&k3_clks 119 3>, /* icssg0_iep_clk */ + <&icssg0_coreclk_mux>; /* core_clk */ + assigned-clocks = <&icssg0_iepclk_mux>; + assigned-clock-parents = <&icssg0_coreclk_mux>; + }; + }; + }; + + icssg0_mii_rt: mii-rt@32000 { + compatible = "ti,pruss-mii", "syscon"; + reg = <0x32000 0x100>; + }; + + icssg0_mii_g_rt: mii-g-rt@33000 { + compatible = "ti,pruss-mii-g", "syscon"; + reg = <0x33000 0x1000>; + }; + + icssg0_intc: interrupt-controller@20000 { + compatible = "ti,icssg-intc"; + reg = <0x20000 0x2000>; + interrupt-controller; + #interrupt-cells = <3>; + interrupts = , + , + , + , + , + , + , + ; + interrupt-names = "host_intr0", "host_intr1", + "host_intr2", "host_intr3", + "host_intr4", "host_intr5", + "host_intr6", "host_intr7"; + }; + + pru0_0: pru@34000 { + compatible = "ti,j721e-pru"; + reg = <0x34000 0x3000>, + <0x22000 0x100>, + <0x22400 0x100>; + reg-names = "iram", "control", "debug"; + firmware-name = "j7-pru0_0-fw"; + }; + + rtu0_0: rtu@4000 { + compatible = "ti,j721e-rtu"; + reg = <0x4000 0x2000>, + <0x23000 0x100>, + <0x23400 0x100>; + reg-names = "iram", "control", "debug"; + firmware-name = "j7-rtu0_0-fw"; + }; + + tx_pru0_0: txpru@a000 { + compatible = "ti,j721e-tx-pru"; + reg = <0xa000 0x1800>, + <0x25000 0x100>, + <0x25400 0x100>; + reg-names = "iram", "control", "debug"; + firmware-name = "j7-txpru0_0-fw"; + }; + + pru0_1: pru@38000 { + compatible = "ti,j721e-pru"; + reg = <0x38000 0x3000>, + <0x24000 0x100>, + <0x24400 0x100>; + reg-names = "iram", "control", "debug"; + firmware-name = "j7-pru0_1-fw"; + }; + + rtu0_1: rtu@6000 { + compatible = "ti,j721e-rtu"; + reg = <0x6000 0x2000>, + <0x23800 0x100>, + <0x23c00 0x100>; + reg-names = "iram", "control", "debug"; + firmware-name = "j7-rtu0_1-fw"; + }; + + tx_pru0_1: txpru@c000 { + compatible = "ti,j721e-tx-pru"; + reg = <0xc000 0x1800>, + <0x25800 0x100>, + <0x25c00 0x100>; + reg-names = "iram", "control", "debug"; + firmware-name = "j7-txpru0_1-fw"; + }; + + icssg0_mdio: mdio@32400 { + compatible = "ti,davinci_mdio"; + reg = <0x32400 0x100>; + clocks = <&k3_clks 119 1>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <0>; + bus_freq = <1000000>; + }; + }; + + icssg1: icssg@b100000 { + compatible = "ti,j721e-icssg"; + reg = <0x00 0xb100000 0x00 0x80000>; + power-domains = <&k3_pds 120 TI_SCI_PD_EXCLUSIVE>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x00 0x0b100000 0x100000>; + + icssg1_mem: memories@b100000 { + reg = <0x0 0x2000>, + <0x2000 0x2000>, + <0x10000 0x10000>; + reg-names = "dram0", "dram1", + "shrdram2"; + }; + + icssg1_cfg: cfg@26000 { + compatible = "ti,pruss-cfg", "syscon"; + reg = <0x26000 0x200>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x26000 0x2000>; + + clocks { + #address-cells = <1>; + #size-cells = <0>; + + icssg1_coreclk_mux: coreclk-mux@3c { + reg = <0x3c>; + #clock-cells = <0>; + clocks = <&k3_clks 120 54>, /* icssg1_core_clk */ + <&k3_clks 120 4>; /* icssg1_iclk */ + assigned-clocks = <&icssg1_coreclk_mux>; + assigned-clock-parents = <&k3_clks 120 4>; + }; + + icssg1_iepclk_mux: iepclk-mux@30 { + reg = <0x30>; + #clock-cells = <0>; + clocks = <&k3_clks 120 9>, /* icssg1_iep_clk */ + <&icssg1_coreclk_mux>; /* core_clk */ + assigned-clocks = <&icssg1_iepclk_mux>; + assigned-clock-parents = <&icssg1_coreclk_mux>; + }; + }; + }; + + icssg1_mii_rt: mii-rt@32000 { + compatible = "ti,pruss-mii", "syscon"; + reg = <0x32000 0x100>; + }; + + icssg1_mii_g_rt: mii-g-rt@33000 { + compatible = "ti,pruss-mii-g", "syscon"; + reg = <0x33000 0x1000>; + }; + + icssg1_intc: interrupt-controller@20000 { + compatible = "ti,icssg-intc"; + reg = <0x20000 0x2000>; + interrupt-controller; + #interrupt-cells = <3>; + interrupts = , + , + , + , + , + , + , + ; + interrupt-names = "host_intr0", "host_intr1", + "host_intr2", "host_intr3", + "host_intr4", "host_intr5", + "host_intr6", "host_intr7"; + }; + + pru1_0: pru@34000 { + compatible = "ti,j721e-pru"; + reg = <0x34000 0x4000>, + <0x22000 0x100>, + <0x22400 0x100>; + reg-names = "iram", "control", "debug"; + firmware-name = "j7-pru1_0-fw"; + }; + + rtu1_0: rtu@4000 { + compatible = "ti,j721e-rtu"; + reg = <0x4000 0x2000>, + <0x23000 0x100>, + <0x23400 0x100>; + reg-names = "iram", "control", "debug"; + firmware-name = "j7-rtu1_0-fw"; + }; + + tx_pru1_0: txpru@a000 { + compatible = "ti,j721e-tx-pru"; + reg = <0xa000 0x1800>, + <0x25000 0x100>, + <0x25400 0x100>; + reg-names = "iram", "control", "debug"; + firmware-name = "j7-txpru1_0-fw"; + }; + + pru1_1: pru@38000 { + compatible = "ti,j721e-pru"; + reg = <0x38000 0x4000>, + <0x24000 0x100>, + <0x24400 0x100>; + reg-names = "iram", "control", "debug"; + firmware-name = "j7-pru1_1-fw"; + }; + + rtu1_1: rtu@6000 { + compatible = "ti,j721e-rtu"; + reg = <0x6000 0x2000>, + <0x23800 0x100>, + <0x23c00 0x100>; + reg-names = "iram", "control", "debug"; + firmware-name = "j7-rtu1_1-fw"; + }; + + tx_pru1_1: txpru@c000 { + compatible = "ti,j721e-tx-pru"; + reg = <0xc000 0x1800>, + <0x25800 0x100>, + <0x25c00 0x100>; + reg-names = "iram", "control", "debug"; + firmware-name = "j7-txpru1_1-fw"; + }; + + icssg1_mdio: mdio@32400 { + compatible = "ti,davinci_mdio"; + reg = <0x32400 0x100>; + clocks = <&k3_clks 120 4>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <0>; + bus_freq = <1000000>; + }; + }; }; diff --git a/arch/arm/dts/k3-j721e-mcu-wakeup.dtsi b/arch/arm/dts/k3-j721e-mcu-wakeup.dtsi index 8750de7aa6..d2dceda72f 100644 --- a/arch/arm/dts/k3-j721e-mcu-wakeup.dtsi +++ b/arch/arm/dts/k3-j721e-mcu-wakeup.dtsi @@ -6,7 +6,7 @@ */ &cbass_mcu_wakeup { - dmsc: dmsc@44083000 { + dmsc: system-controller@44083000 { compatible = "ti,k2g-sci"; ti,host-id = <12>; @@ -23,7 +23,7 @@ #power-domain-cells = <2>; }; - k3_clks: clocks { + k3_clks: clock-controller { compatible = "ti,k2g-sci-clk"; #clock-cells = <2>; }; @@ -73,8 +73,6 @@ wkup_uart0: serial@42300000 { compatible = "ti,j721e-uart", "ti,am654-uart"; reg = <0x00 0x42300000 0x00 0x100>; - reg-shift = <2>; - reg-io-width = <4>; interrupts = ; clock-frequency = <48000000>; current-speed = <115200>; @@ -86,8 +84,6 @@ mcu_uart0: serial@40a00000 { compatible = "ti,j721e-uart", "ti,am654-uart"; reg = <0x00 0x40a00000 0x00 0x100>; - reg-shift = <2>; - reg-io-width = <4>; interrupts = ; clock-frequency = <96000000>; current-speed = <115200>; @@ -96,8 +92,9 @@ clock-names = "fclk"; }; - wkup_gpio_intr: interrupt-controller2 { + wkup_gpio_intr: interrupt-controller@42200000 { compatible = "ti,sci-intr"; + reg = <0x00 0x42200000 0x00 0x400>; ti,intr-trigger-type = <1>; interrupt-controller; interrupt-parent = <&gic500>; @@ -179,26 +176,8 @@ #size-cells = <2>; ranges; - hbmc_mux: hbmc-mux { - compatible = "mmio-mux"; - #mux-control-cells = <1>; - mux-reg-masks = <0x4 0x2>; /* HBMC select */ - }; - - hbmc: hyperbus@47034000 { - compatible = "ti,j721e-hbmc", "ti,am654-hbmc"; - reg = <0x0 0x47034000 0x0 0x100>, - <0x5 0x00000000 0x1 0x0000000>; - power-domains = <&k3_pds 102 TI_SCI_PD_EXCLUSIVE>; - #address-cells = <2>; - #size-cells = <1>; - mux-controls = <&hbmc_mux 0>; - assigned-clocks = <&k3_clks 102 0>; - assigned-clock-rates = <250000000>; - }; - ospi0: spi@47040000 { - compatible = "ti,am654-ospi"; + compatible = "ti,am654-ospi", "cdns,qspi-nor"; reg = <0x0 0x47040000 0x0 0x100>, <0x5 0x00000000 0x1 0x0000000>; interrupts = ; @@ -215,7 +194,7 @@ }; ospi1: spi@47050000 { - compatible = "ti,am654-ospi"; + compatible = "ti,am654-ospi", "cdns,qspi-nor"; reg = <0x0 0x47050000 0x0 0x100>, <0x7 0x00000000 0x1 0x00000000>; interrupts = ; @@ -267,11 +246,11 @@ }; }; - mcu-navss { + mcu_navss: bus@28380000 { compatible = "simple-mfd"; #address-cells = <2>; #size-cells = <2>; - ranges; + ranges = <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>; dma-coherent; dma-ranges; diff --git a/arch/arm/dts/k3-j721e-som-p0.dtsi b/arch/arm/dts/k3-j721e-som-p0.dtsi index ebc0f5bbc5..2fee290618 100644 --- a/arch/arm/dts/k3-j721e-som-p0.dtsi +++ b/arch/arm/dts/k3-j721e-som-p0.dtsi @@ -150,25 +150,6 @@ >; }; - mcu_fss0_hpb0_pins_default: mcu-fss0-hpb0-pins-default { - pinctrl-single,pins = < - J721E_WKUP_IOPAD(0x0, PIN_OUTPUT, 1) /* (E20) MCU_OSPI0_CLK.MCU_HYPERBUS0_CK */ - J721E_WKUP_IOPAD(0x4, PIN_OUTPUT, 1) /* (C21) MCU_OSPI0_LBCLKO.MCU_HYPERBUS0_CKn */ - J721E_WKUP_IOPAD(0x2c, PIN_OUTPUT, 1) /* (F19) MCU_OSPI0_CSn0.MCU_HYPERBUS0_CSn0 */ - J721E_WKUP_IOPAD(0x54, PIN_OUTPUT, 3) /* (E22) MCU_OSPI1_CSn1.MCU_HYPERBUS0_CSn1 */ - J721E_WKUP_IOPAD(0x30, PIN_OUTPUT, 1) /* (E19) MCU_OSPI0_CSn1.MCU_HYPERBUS0_RESETn */ - J721E_WKUP_IOPAD(0x8, PIN_INPUT, 1) /* (D21) MCU_OSPI0_DQS.MCU_HYPERBUS0_RWDS */ - J721E_WKUP_IOPAD(0xc, PIN_INPUT, 1) /* (D20) MCU_OSPI0_D0.MCU_HYPERBUS0_DQ0 */ - J721E_WKUP_IOPAD(0x10, PIN_INPUT, 1) /* (G19) MCU_OSPI0_D1.MCU_HYPERBUS0_DQ1 */ - J721E_WKUP_IOPAD(0x14, PIN_INPUT, 1) /* (G20) MCU_OSPI0_D2.MCU_HYPERBUS0_DQ2 */ - J721E_WKUP_IOPAD(0x18, PIN_INPUT, 1) /* (F20) MCU_OSPI0_D3.MCU_HYPERBUS0_DQ3 */ - J721E_WKUP_IOPAD(0x1c, PIN_INPUT, 1) /* (F21) MCU_OSPI0_D4.MCU_HYPERBUS0_DQ4 */ - J721E_WKUP_IOPAD(0x20, PIN_INPUT, 1) /* (E21) MCU_OSPI0_D5.MCU_HYPERBUS0_DQ5 */ - J721E_WKUP_IOPAD(0x24, PIN_INPUT, 1) /* (B22) MCU_OSPI0_D6.MCU_HYPERBUS0_DQ6 */ - J721E_WKUP_IOPAD(0x28, PIN_INPUT, 1) /* (G21) MCU_OSPI0_D7.MCU_HYPERBUS0_DQ7 */ - >; - }; - mcu_fss0_ospi0_pins_default: mcu-fss0-ospi0-pins-default { pinctrl-single,pins = < J721E_WKUP_IOPAD(0x0000, PIN_OUTPUT, 0) /* MCU_OSPI0_CLK */ @@ -186,19 +167,6 @@ }; }; -&hbmc { - status = "disabled"; - pinctrl-names = "default"; - pinctrl-0 = <&mcu_fss0_hpb0_pins_default>; - ranges = <0x0 0x0 0x5 0x0 0x4000000>, /* 64MB Flash on CS0 */ - <0x1 0x0 0x5 0x4000000 0x800000>; /* 8MB RAM on CS1 */ - - flash@0,0 { - compatible = "cypress,hyperflash", "cfi-flash"; - reg = <0x0 0x0 0x4000000>; - }; -}; - &ospi0 { pinctrl-names = "default"; pinctrl-0 = <&mcu_fss0_ospi0_pins_default>; @@ -206,9 +174,9 @@ flash@0{ compatible = "jedec,spi-nor"; reg = <0x0>; - spi-tx-bus-width = <1>; + spi-tx-bus-width = <8>; spi-rx-bus-width = <8>; - spi-max-frequency = <40000000>; + spi-max-frequency = <25000000>; cdns,tshsl-ns = <60>; cdns,tsd2d-ns = <60>; cdns,tchsh-ns = <60>; diff --git a/arch/arm/dts/k3-j721e.dtsi b/arch/arm/dts/k3-j721e.dtsi index 84693fce65..f0587fde14 100644 --- a/arch/arm/dts/k3-j721e.dtsi +++ b/arch/arm/dts/k3-j721e.dtsi @@ -115,7 +115,7 @@ }; pmu: pmu { - compatible = "arm,armv8-pmuv3"; + compatible = "arm,cortex-a72-pmu"; /* Recommendation from GIC500 TRM Table A.3 */ interrupts = ; }; @@ -126,7 +126,6 @@ #size-cells = <2>; ranges = <0x00 0x00100000 0x00 0x00100000 0x00 0x00020000>, /* ctrl mmr */ <0x00 0x00600000 0x00 0x00600000 0x00 0x00031100>, /* GPIO */ - <0x00 0x00700000 0x00 0x00700000 0x00 0x00001000>, /* ESM */ <0x00 0x00900000 0x00 0x00900000 0x00 0x00012000>, /* serdes */ <0x00 0x00a40000 0x00 0x00a40000 0x00 0x00000800>, /* timesync router */ <0x00 0x06000000 0x00 0x06000000 0x00 0x00400000>, /* USBSS0 */ diff --git a/include/dt-bindings/net/ti-dp83867.h b/include/dt-bindings/net/ti-dp83867.h index cde5aa7e27..6fc4b445d3 100644 --- a/include/dt-bindings/net/ti-dp83867.h +++ b/include/dt-bindings/net/ti-dp83867.h @@ -1,7 +1,10 @@ -/* SPDX-License-Identifier: GPL-2.0 */ +/* SPDX-License-Identifier: GPL-2.0-only */ /* - * TI DP83867 PHY drivers + * Device Tree constants for the Texas Instruments DP83867 PHY * + * Author: Dan Murphy + * + * Copyright: (C) 2015 Texas Instruments, Inc. */ #ifndef _DT_BINDINGS_TI_DP83867_H @@ -14,22 +17,22 @@ #define DP83867_PHYCR_FIFO_DEPTH_8_B_NIB 0x03 /* RGMIIDCTL internal delay for rx and tx */ -#define DP83867_RGMIIDCTL_250_PS 0x0 -#define DP83867_RGMIIDCTL_500_PS 0x1 -#define DP83867_RGMIIDCTL_750_PS 0x2 -#define DP83867_RGMIIDCTL_1_NS 0x3 -#define DP83867_RGMIIDCTL_1_25_NS 0x4 -#define DP83867_RGMIIDCTL_1_50_NS 0x5 -#define DP83867_RGMIIDCTL_1_75_NS 0x6 -#define DP83867_RGMIIDCTL_2_00_NS 0x7 -#define DP83867_RGMIIDCTL_2_25_NS 0x8 -#define DP83867_RGMIIDCTL_2_50_NS 0x9 -#define DP83867_RGMIIDCTL_2_75_NS 0xa -#define DP83867_RGMIIDCTL_3_00_NS 0xb -#define DP83867_RGMIIDCTL_3_25_NS 0xc -#define DP83867_RGMIIDCTL_3_50_NS 0xd -#define DP83867_RGMIIDCTL_3_75_NS 0xe -#define DP83867_RGMIIDCTL_4_00_NS 0xf +#define DP83867_RGMIIDCTL_250_PS 0x0 +#define DP83867_RGMIIDCTL_500_PS 0x1 +#define DP83867_RGMIIDCTL_750_PS 0x2 +#define DP83867_RGMIIDCTL_1_NS 0x3 +#define DP83867_RGMIIDCTL_1_25_NS 0x4 +#define DP83867_RGMIIDCTL_1_50_NS 0x5 +#define DP83867_RGMIIDCTL_1_75_NS 0x6 +#define DP83867_RGMIIDCTL_2_00_NS 0x7 +#define DP83867_RGMIIDCTL_2_25_NS 0x8 +#define DP83867_RGMIIDCTL_2_50_NS 0x9 +#define DP83867_RGMIIDCTL_2_75_NS 0xa +#define DP83867_RGMIIDCTL_3_00_NS 0xb +#define DP83867_RGMIIDCTL_3_25_NS 0xc +#define DP83867_RGMIIDCTL_3_50_NS 0xd +#define DP83867_RGMIIDCTL_3_75_NS 0xe +#define DP83867_RGMIIDCTL_4_00_NS 0xf /* IO_MUX_CFG - Clock output selection */ #define DP83867_CLK_O_SEL_CHN_A_RCLK 0x0