From: Simon Glass Date: Mon, 22 Feb 2016 04:08:58 +0000 (-0700) Subject: exynos: dts: Add display-related device tree fragments X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=f948f5de94822a372d01e0903b4fe8c682d230e4;p=u-boot.git exynos: dts: Add display-related device tree fragments Bring in device tree pieces related to display from Linux 4.4 for: - snow - peach_pit - peach_pi - spring Signed-off-by: Simon Glass Signed-off-by: Minkyu Kang --- diff --git a/arch/arm/dts/exynos5.dtsi b/arch/arm/dts/exynos5.dtsi index 179584c748..8650800f52 100644 --- a/arch/arm/dts/exynos5.dtsi +++ b/arch/arm/dts/exynos5.dtsi @@ -163,13 +163,14 @@ }; fimd@14400000 { + u-boot,dm-pre-reloc; compatible = "samsung,exynos-fimd"; reg = <0x14400000 0x10000>; #address-cells = <1>; #size-cells = <1>; }; - dp@145b0000 { + dp: dp@145b0000 { compatible = "samsung,exynos5-dp"; reg = <0x145b0000 0x1000>; #address-cells = <1>; diff --git a/arch/arm/dts/exynos5250-snow.dts b/arch/arm/dts/exynos5250-snow.dts index bda5499988..29c13c1257 100644 --- a/arch/arm/dts/exynos5250-snow.dts +++ b/arch/arm/dts/exynos5250-snow.dts @@ -198,6 +198,20 @@ reset-gpios = <&gpx1 5 GPIO_ACTIVE_LOW>; hotplug-gpios = <&gpx0 7 GPIO_ACTIVE_HIGH>; edid-emulation = <5>; + + ports { + port@0 { + bridge_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + + port@1 { + bridge_in: endpoint { + remote-endpoint = <&dp_out>; + }; + }; + }; }; soundcodec@22 { @@ -223,6 +237,27 @@ }; }; + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm 0 1000000 0>; + brightness-levels = <0 100 500 1000 1500 2000 2500 2800>; + default-brightness-level = <7>; + enable-gpios = <&gpx3 0 GPIO_ACTIVE_HIGH>; + power-supply = <&fet1>; + }; + + panel: panel { + compatible = "auo,b116xw03"; + power-supply = <&fet6>; + backlight = <&backlight>; + + port { + panel_in: endpoint { + remote-endpoint = <&bridge_out>; + }; + }; + }; + spi@131b0000 { spi-max-frequency = <1000000>; spi-deactivate-delay = <100>; @@ -337,6 +372,15 @@ samsung,dynamic-range = <0>; samsung,ycbcr-coeff = <0>; samsung,color-depth = <1>; + samsung,hpd-gpio = <&gpx0 7 GPIO_ACTIVE_HIGH>; + + ports { + port@0 { + dp_out: endpoint { + remote-endpoint = <&bridge_in>; + }; + }; + }; }; }; diff --git a/arch/arm/dts/exynos5250-spring.dts b/arch/arm/dts/exynos5250-spring.dts index 81b3d29f9c..693501e4c1 100644 --- a/arch/arm/dts/exynos5250-spring.dts +++ b/arch/arm/dts/exynos5250-spring.dts @@ -158,6 +158,27 @@ samsung,ycbcr-coeff = <0>; samsung,color-depth = <1>; }; + + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm 0 1000000 0>; + brightness-levels = <0 100 500 1000 1500 2000 2500 2800>; + default-brightness-level = <1>; + enable-gpios = <&gpx3 0 GPIO_ACTIVE_HIGH>; + power-supply = <&fet1>; + }; + + panel: panel { + compatible = "auo,b116xw03"; + power-supply = <&fet6>; + backlight = <&backlight>; + + port { + panel_in: endpoint { + remote-endpoint = <&bridge_out>; + }; + }; + }; }; &i2c_0 { @@ -385,6 +406,25 @@ }; }; +&dp { + status = "okay"; + samsung,color-space = <0>; + samsung,dynamic-range = <0>; + samsung,ycbcr-coeff = <0>; + samsung,color-depth = <1>; + samsung,link-rate = <0x0a>; + samsung,lane-count = <1>; + samsung,hpd-gpio = <&gpc3 0 GPIO_ACTIVE_HIGH>; + + ports { + port@0 { + dp_out: endpoint { + remote-endpoint = <&bridge_in>; + }; + }; + }; +}; + &i2c_1 { status = "okay"; samsung,i2c-sda-delay = <100>; @@ -585,6 +625,19 @@ 0x04 0x59 0x60 /* MPU Clock source: LC => RCO */ 0x04 0x54 0x14 /* LC -> RCO */ 0x02 0xa1 0x91>; /* HPD high */ + ports { + port@0 { + bridge_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + + port@1 { + bridge_in: endpoint { + remote-endpoint = <&dp_out>; + }; + }; + }; }; soundcodec@20 { diff --git a/arch/arm/dts/exynos5420-peach-pit.dts b/arch/arm/dts/exynos5420-peach-pit.dts index 16d52f4928..2db4ad2dbd 100644 --- a/arch/arm/dts/exynos5420-peach-pit.dts +++ b/arch/arm/dts/exynos5420-peach-pit.dts @@ -9,6 +9,8 @@ /dts-v1/; #include "exynos54xx.dtsi" +#include +#include / { model = "Samsung/Google Peach Pit board based on Exynos5420"; @@ -29,6 +31,14 @@ i2c104 = &i2c_tunnel; }; + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm 0 1000000 0>; + brightness-levels = <0 100 500 1000 1500 2000 2500 2800>; + default-brightness-level = <7>; + power-supply = <&tps65090_fet1>; + }; + dmc { mem-manuf = "samsung"; mem-type = "ddr3"; @@ -188,6 +198,20 @@ 0x04 0x59 0x60 0x04 0x54 0x14 /* LC -> RCO */ 0x02 0xa1 0x91>; /* HPD high */ + + ports { + port@0 { + bridge_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + + port@1 { + bridge_in: endpoint { + remote-endpoint = <&dp_out>; + }; + }; + }; }; }; @@ -203,6 +227,18 @@ }; }; + panel: panel { + compatible = "auo,b116xw03"; + power-supply = <&tps65090_fet6>; + backlight = <&backlight>; + + port { + panel_in: endpoint { + remote-endpoint = <&bridge_out>; + }; + }; + }; + spi@12d30000 { /* spi1 */ spi-max-frequency = <50000000>; firmware_storage_spi: flash@0 { @@ -254,6 +290,25 @@ }; }; +&dp { + status = "okay"; + samsung,color-space = <0>; + samsung,dynamic-range = <0>; + samsung,ycbcr-coeff = <0>; + samsung,color-depth = <1>; + samsung,link-rate = <0x06>; + samsung,lane-count = <2>; + samsung,hpd-gpio = <&gpx2 6 GPIO_ACTIVE_HIGH>; + + ports { + port@0 { + dp_out: endpoint { + remote-endpoint = <&bridge_in>; + }; + }; + }; +}; + &spi_2 { spi-max-frequency = <3125000>; spi-deactivate-delay = <200>; diff --git a/arch/arm/dts/exynos54xx.dtsi b/arch/arm/dts/exynos54xx.dtsi index be99a82d5f..b4ddf53a2e 100644 --- a/arch/arm/dts/exynos54xx.dtsi +++ b/arch/arm/dts/exynos54xx.dtsi @@ -49,7 +49,7 @@ status = "disabled"; }; - i2c@12CA0000 { + hsi2c_4: i2c@12CA0000 { #address-cells = <1>; #size-cells = <0>; compatible = "samsung,exynos5-hsi2c"; @@ -178,7 +178,7 @@ samsung,pwm-out-gpio = <&gpb2 0 GPIO_ACTIVE_HIGH>; }; - dp@145b0000 { + dp: dp@145b0000 { samsung,lt-status = <0>; samsung,master-mode = <0>; diff --git a/arch/arm/dts/exynos5800-peach-pi.dts b/arch/arm/dts/exynos5800-peach-pi.dts index 76826dc23b..4c139bf143 100644 --- a/arch/arm/dts/exynos5800-peach-pi.dts +++ b/arch/arm/dts/exynos5800-peach-pi.dts @@ -30,6 +30,27 @@ i2c104 = &i2c_tunnel; }; + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm 0 1000000 0>; + brightness-levels = <0 100 500 1000 1500 2000 2500 2800>; + default-brightness-level = <7>; + enable-gpios = <&gpx2 2 GPIO_ACTIVE_HIGH>; + power-supply = <&tps65090_fet1>; + }; + + panel: panel { + compatible = "auo,b133htn01"; + power-supply = <&tps65090_fet6>; + backlight = <&backlight>; + + port { + panel_in: endpoint { + remote-endpoint = <&dp_out>; + }; + }; + }; + dmc { mem-manuf = "samsung"; mem-type = "ddr3"; @@ -132,6 +153,25 @@ }; }; +&dp { + status = "okay"; + samsung,color-space = <0>; + samsung,dynamic-range = <0>; + samsung,ycbcr-coeff = <0>; + samsung,color-depth = <1>; + samsung,link-rate = <0x0a>; + samsung,lane-count = <2>; + samsung,hpd-gpio = <&gpx2 6 GPIO_ACTIVE_HIGH>; + + ports { + port { + dp_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + }; +}; + &spi_2 { spi-max-frequency = <3125000>; spi-deactivate-delay = <200>;