From: Marek Vasut Date: Sun, 17 Sep 2023 14:13:08 +0000 (+0200) Subject: ARM: dts: renesas: Synchronize R-Car R8A77980 V3H DTs with Linux 6.5.3 X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=f8c24dabda32aa9c2381be17a6c5c3f5901278fb;p=u-boot.git ARM: dts: renesas: Synchronize R-Car R8A77980 V3H DTs with Linux 6.5.3 Synchronize R-Car R8A77980 V3H DTs with Linux 6.5.3, commit 238589d0f7b421aae18c5704dc931595019fa6c7 . Signed-off-by: Marek Vasut --- diff --git a/arch/arm/dts/condor-common.dtsi b/arch/arm/dts/condor-common.dtsi index dfbe35bf46..7c34d14dcd 100644 --- a/arch/arm/dts/condor-common.dtsi +++ b/arch/arm/dts/condor-common.dtsi @@ -21,6 +21,7 @@ chosen { stdout-path = "serial0:115200n8"; + bootargs = "ignore_loglevel rw root=/dev/nfs ip=on"; }; d1_8v: regulator-2 { diff --git a/arch/arm/dts/r8a77980-condor.dts b/arch/arm/dts/r8a77980-condor.dts index 1d326552e2..68d1f1d53b 100644 --- a/arch/arm/dts/r8a77980-condor.dts +++ b/arch/arm/dts/r8a77980-condor.dts @@ -14,3 +14,11 @@ model = "Renesas Condor board based on r8a77980"; compatible = "renesas,condor", "renesas,r8a77980"; }; + +&i2c0 { + eeprom@50 { + compatible = "rohm,br24t01", "atmel,24c01"; + reg = <0x50>; + pagesize = <8>; + }; +}; diff --git a/arch/arm/dts/r8a77980-v3hsk.dts b/arch/arm/dts/r8a77980-v3hsk.dts index d168b0e774..77d22df25f 100644 --- a/arch/arm/dts/r8a77980-v3hsk.dts +++ b/arch/arm/dts/r8a77980-v3hsk.dts @@ -122,6 +122,7 @@ phy0: ethernet-phy@0 { compatible = "ethernet-phy-id0022.1622", "ethernet-phy-ieee802.3-c22"; + rxc-skew-ps = <1500>; reg = <0>; interrupt-parent = <&gpio4>; interrupts = <23 IRQ_TYPE_LEVEL_LOW>; diff --git a/arch/arm/dts/r8a77980.dtsi b/arch/arm/dts/r8a77980.dtsi index c4ac28a0f7..5ed2daaca1 100644 --- a/arch/arm/dts/r8a77980.dtsi +++ b/arch/arm/dts/r8a77980.dtsi @@ -1386,7 +1386,8 @@ <0x02000000 0 0xfe200000 0 0xfe200000 0 0x0200000>, <0x02000000 0 0x30000000 0 0x30000000 0 0x8000000>, <0x42000000 0 0x38000000 0 0x38000000 0 0x8000000>; - dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000>; + /* Map all possible DDR/IOMMU as inbound ranges */ + dma-ranges = <0x42000000 0 0x00000000 0 0x00000000 1 0x00000000>; interrupts = , , ; @@ -1399,6 +1400,8 @@ resets = <&cpg 319>; phys = <&pcie_phy>; phy-names = "pcie"; + iommu-map = <0 &ipmmu_vi0 5 1>; + iommu-map-mask = <0>; status = "disabled"; };