From: Simon Glass Date: Sun, 8 Aug 2021 18:20:17 +0000 (-0600) Subject: sata: Rename SATA_SUPPORT to SATA X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=f7560376aec089357da0e4b9faf7d4f594ef1ebd;p=u-boot.git sata: Rename SATA_SUPPORT to SATA Rename this options so that CONFIG_IS_ENABLED can be used with it. Signed-off-by: Simon Glass --- diff --git a/arch/arm/mach-mvebu/Kconfig b/arch/arm/mach-mvebu/Kconfig index 73327aa131..087643725e 100644 --- a/arch/arm/mach-mvebu/Kconfig +++ b/arch/arm/mach-mvebu/Kconfig @@ -298,7 +298,7 @@ config MVEBU_SPL_BOOT_DEVICE_MMC config MVEBU_SPL_BOOT_DEVICE_SATA bool "SATA" - imply SPL_SATA_SUPPORT + imply SPL_SATA imply SPL_LIBDISK_SUPPORT select SPL_BOOTROM_SUPPORT diff --git a/arch/arm/mach-mvebu/spl.c b/arch/arm/mach-mvebu/spl.c index d0cdf68292..77ee46cdd8 100644 --- a/arch/arm/mach-mvebu/spl.c +++ b/arch/arm/mach-mvebu/spl.c @@ -18,7 +18,7 @@ #include #if defined(CONFIG_SPL_SPI_FLASH_SUPPORT) || defined(CONFIG_SPL_MMC) || \ - defined(CONFIG_SPL_SATA_SUPPORT) + defined(CONFIG_SPL_SATA) /* * When loading U-Boot via SPL from SPI NOR, CONFIG_SYS_SPI_U_BOOT_OFFS must @@ -57,7 +57,7 @@ * stored at sector 1. Therefore CONFIG_SPL_SATA_RAW_U_BOOT_SECTOR must be * set to 1. Otherwise U-Boot SPL would not be able to load U-Boot proper. */ -#ifdef CONFIG_SPL_SATA_SUPPORT +#ifdef CONFIG_SPL_SATA #if !defined(CONFIG_SPL_SATA_RAW_U_BOOT_USE_SECTOR) || !defined(CONFIG_SPL_SATA_RAW_U_BOOT_SECTOR) || CONFIG_SPL_SATA_RAW_U_BOOT_SECTOR != 1 #error CONFIG_SPL_SATA_RAW_U_BOOT_SECTOR must be set to 1 #endif @@ -122,7 +122,7 @@ int spl_parse_board_header(struct spl_image_info *spl_image, #ifdef CONFIG_SPL_SPI_FLASH_SUPPORT mhdr->blockid != IBR_HDR_SPI_ID && #endif -#ifdef CONFIG_SPL_SATA_SUPPORT +#ifdef CONFIG_SPL_SATA mhdr->blockid != IBR_HDR_SATA_ID && #endif #ifdef CONFIG_SPL_MMC @@ -136,7 +136,7 @@ int spl_parse_board_header(struct spl_image_info *spl_image, spl_image->offset = mhdr->srcaddr; -#ifdef CONFIG_SPL_SATA_SUPPORT +#ifdef CONFIG_SPL_SATA /* * For SATA srcaddr is specified in number of sectors. * The main header is must be stored at sector number 1. @@ -266,7 +266,7 @@ u32 spl_boot_device(void) case BOOT_DEVICE_MMC1: return BOOT_DEVICE_MMC1; #endif -#ifdef CONFIG_SPL_SATA_SUPPORT +#ifdef CONFIG_SPL_SATA case BOOT_FROM_SATA: return BOOT_FROM_SATA; #endif diff --git a/arch/arm/mach-zynqmp/spl.c b/arch/arm/mach-zynqmp/spl.c index c3a99041b0..6b836cbff2 100644 --- a/arch/arm/mach-zynqmp/spl.c +++ b/arch/arm/mach-zynqmp/spl.c @@ -100,7 +100,7 @@ u32 spl_boot_device(void) case USB_MODE: return BOOT_DEVICE_DFU; #endif -#ifdef CONFIG_SPL_SATA_SUPPORT +#ifdef CONFIG_SPL_SATA case SW_SATA_MODE: return BOOT_DEVICE_SATA; #endif diff --git a/arch/powerpc/cpu/mpc83xx/Kconfig b/arch/powerpc/cpu/mpc83xx/Kconfig index 7c922b2309..fcf4ef2b36 100644 --- a/arch/powerpc/cpu/mpc83xx/Kconfig +++ b/arch/powerpc/cpu/mpc83xx/Kconfig @@ -119,7 +119,7 @@ config MPC83XX_PCIE2_SUPPORT config MPC83XX_SDHC_SUPPORT bool -config MPC83XX_SATA_SUPPORT +config MPC83XX_SATA bool config MPC83XX_SECOND_I2C @@ -198,7 +198,7 @@ config ARCH_MPC837X select MPC83XX_PCIE1_SUPPORT select MPC83XX_PCIE2_SUPPORT select MPC83XX_SDHC_SUPPORT - select MPC83XX_SATA_SUPPORT + select MPC83XX_SATA select MPC83XX_LDP_PIN select MPC83XX_SECOND_I2C select SYS_CACHE_SHIFT_5 diff --git a/common/spl/Kconfig b/common/spl/Kconfig index 76bb29444d..2618857860 100644 --- a/common/spl/Kconfig +++ b/common/spl/Kconfig @@ -196,7 +196,7 @@ config SPL_BOOTCOUNT_LIMIT config SPL_RAW_IMAGE_SUPPORT bool "Support SPL loading and booting of RAW images" - default n if (ARCH_MX6 && (SPL_MMC || SPL_SATA_SUPPORT)) + default n if (ARCH_MX6 && (SPL_MMC || SPL_SATA)) default y if !TI_SECURE_DEVICE help SPL will support loading and booting a RAW image when this option @@ -1076,7 +1076,7 @@ config SPL_RTC needed. This enables the drivers in drivers/rtc as part of an SPL build. -config SPL_SATA_SUPPORT +config SPL_SATA bool "Support loading from SATA" help Enable support for SATA (Serial AT attachment) in SPL. This allows @@ -1088,7 +1088,7 @@ config SPL_SATA_SUPPORT config SPL_SATA_RAW_U_BOOT_USE_SECTOR bool "SATA raw mode: by sector" - depends on SPL_SATA_SUPPORT + depends on SPL_SATA default y if ARCH_MVEBU help Use sector number for specifying U-Boot location on SATA disk in diff --git a/common/spl/Makefile b/common/spl/Makefile index 29ac624f9a..40107e39bd 100644 --- a/common/spl/Makefile +++ b/common/spl/Makefile @@ -27,7 +27,7 @@ obj-$(CONFIG_$(SPL_TPL_)OPENSBI) += spl_opensbi.o obj-$(CONFIG_$(SPL_TPL_)USB_STORAGE) += spl_usb.o obj-$(CONFIG_$(SPL_TPL_)FS_FAT) += spl_fat.o obj-$(CONFIG_$(SPL_TPL_)FS_EXT4) += spl_ext.o -obj-$(CONFIG_$(SPL_TPL_)SATA_SUPPORT) += spl_sata.o +obj-$(CONFIG_$(SPL_TPL_)SATA) += spl_sata.o obj-$(CONFIG_$(SPL_TPL_)DFU) += spl_dfu.o obj-$(CONFIG_$(SPL_TPL_)SPI_LOAD) += spl_spi.o obj-$(CONFIG_$(SPL_TPL_)RAM_SUPPORT) += spl_ram.o diff --git a/drivers/Makefile b/drivers/Makefile index 2205dd2582..d62e3dec73 100644 --- a/drivers/Makefile +++ b/drivers/Makefile @@ -60,7 +60,7 @@ obj-$(CONFIG_SPL_USB_GADGET) += usb/gadget/udc/ obj-$(CONFIG_SPL_WATCHDOG) += watchdog/ obj-$(CONFIG_SPL_USB_HOST) += usb/host/ obj-$(CONFIG_OMAP_USB_PHY) += usb/phy/ -obj-$(CONFIG_SPL_SATA_SUPPORT) += ata/ scsi/ +obj-$(CONFIG_SPL_SATA) += ata/ scsi/ obj-$(CONFIG_HAVE_BLOCK_DEVICE) += block/ obj-$(CONFIG_SPL_THERMAL) += thermal/ diff --git a/drivers/scsi/Makefile b/drivers/scsi/Makefile index 6fc5f4a9f9..e9f848636c 100644 --- a/drivers/scsi/Makefile +++ b/drivers/scsi/Makefile @@ -9,7 +9,7 @@ obj-$(CONFIG_SCSI) += scsi.o endif ifdef CONFIG_SPL_BUILD -ifdef CONFIG_SPL_SATA_SUPPORT +ifdef CONFIG_SPL_SATA obj-$(CONFIG_DM_SCSI) += scsi-uclass.o obj-$(CONFIG_SCSI) += scsi.o endif diff --git a/include/configs/imx6_spl.h b/include/configs/imx6_spl.h index b5d50333dd..234aacb3b9 100644 --- a/include/configs/imx6_spl.h +++ b/include/configs/imx6_spl.h @@ -59,7 +59,7 @@ #endif /* SATA support */ -#if defined(CONFIG_SPL_SATA_SUPPORT) +#if defined(CONFIG_SPL_SATA) #define CONFIG_SPL_SATA_BOOT_DEVICE 0 #define CONFIG_SYS_SATA_FAT_BOOT_PARTITION 1 #endif