From: Simon Glass Date: Fri, 22 Oct 2021 03:08:47 +0000 (-0600) Subject: sandbox: Use a text-based environment X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=f501bb4c2aa8ba6dd6260f961e788eb46c0a36b3;p=u-boot.git sandbox: Use a text-based environment Use a text file for the environment instead of the #define settings. Signed-off-by: Simon Glass Reviewed-by: Marek Behún --- diff --git a/board/sandbox/sandbox.env b/board/sandbox/sandbox.env new file mode 100644 index 0000000000..0f8d95b8db --- /dev/null +++ b/board/sandbox/sandbox.env @@ -0,0 +1,25 @@ +stdin=serial +#ifdef CONFIG_SANDBOX_SDL +stdin+=,cros-ec-keyb,usbkbd +#endif +stdout=serial,vidconsole +stderr=serial,vidconsole + +ethaddr=00:00:11:22:33:44 +eth2addr=00:00:11:22:33:48 +eth3addr=00:00:11:22:33:45 +eth4addr=00:00:11:22:33:48 +eth5addr=00:00:11:22:33:46 +eth6addr=00:00:11:22:33:47 +ipaddr=1.2.3.4 + +/* + * These are used for distro boot which is not supported. But once bootmethod + * is provided these will be used again. + */ +bootm_size=0x10000000 +kernel_addr_r=0x1000000 +fdt_addr_r=0xc00000 +ramdisk_addr_r=0x2000000 +scriptaddr=0x1000 +pxefile_addr_r=0x2000 diff --git a/include/configs/sandbox.h b/include/configs/sandbox.h index 0da0cf5092..cc3a7ff05e 100644 --- a/include/configs/sandbox.h +++ b/include/configs/sandbox.h @@ -54,37 +54,8 @@ #define CONFIG_LCD_BMP_RLE8 #define CONFIG_KEYBOARD - -#define SANDBOX_SERIAL_SETTINGS "stdin=serial,cros-ec-keyb,usbkbd\0" \ - "stdout=serial,vidconsole\0" \ - "stderr=serial,vidconsole\0" -#else -#define SANDBOX_SERIAL_SETTINGS "stdin=serial\0" \ - "stdout=serial,vidconsole\0" \ - "stderr=serial,vidconsole\0" #endif -#define SANDBOX_ETH_SETTINGS "ethaddr=00:00:11:22:33:44\0" \ - "eth2addr=00:00:11:22:33:48\0" \ - "eth3addr=00:00:11:22:33:45\0" \ - "eth4addr=00:00:11:22:33:48\0" \ - "eth5addr=00:00:11:22:33:46\0" \ - "eth6addr=00:00:11:22:33:47\0" \ - "ipaddr=1.2.3.4\0" - -#define MEM_LAYOUT_ENV_SETTINGS \ - "bootm_size=0x10000000\0" \ - "kernel_addr_r=0x1000000\0" \ - "fdt_addr_r=0xc00000\0" \ - "ramdisk_addr_r=0x2000000\0" \ - "scriptaddr=0x1000\0" \ - "pxefile_addr_r=0x2000\0" - -#define CONFIG_EXTRA_ENV_SETTINGS \ - SANDBOX_SERIAL_SETTINGS \ - SANDBOX_ETH_SETTINGS \ - MEM_LAYOUT_ENV_SETTINGS - #ifndef CONFIG_SPL_BUILD #define CONFIG_SYS_IDE_MAXBUS 1 #define CONFIG_SYS_ATA_IDE0_OFFSET 0