From: Jagdish Gediya <jagdish.gediya@nxp.com>
Date: Tue, 5 Jun 2018 03:34:05 +0000 (+0530)
Subject: armv8: ls1088a: change dpl load command from apply to lazyapply
X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=f4ef476d2061853ca9a348ec15ce04d2558c755b;p=u-boot.git

armv8: ls1088a: change dpl load command from apply to lazyapply

use "fsl_mc lazyapply dpl addr" instead of "fsl_mc apply dpl addr"

change dpl load addr to 0x80001000 from 0x80200000 because dpl gets
corrupted at 0x80200000 during bootm command excecution.

Signed-off-by: Jagdish Gediya <jagdish.gediya@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
---

diff --git a/include/configs/ls1088a_common.h b/include/configs/ls1088a_common.h
index 137a181217..df81be1971 100644
--- a/include/configs/ls1088a_common.h
+++ b/include/configs/ls1088a_common.h
@@ -195,17 +195,17 @@ unsigned long long get_qixis_addr(void);
 
 #if defined(CONFIG_QSPI_BOOT)
 #define CONFIG_BOOTCOMMAND	"sf probe 0:0;" \
-				"sf read 0x80200000 0xd00000 0x100000;"\
-				" fsl_mc apply dpl 0x80200000 &&" \
+				"sf read 0x80001000 0xd00000 0x100000;"\
+				" fsl_mc lazyapply dpl 0x80001000 &&" \
 				" sf read $kernel_load $kernel_start" \
 				" $kernel_size && bootm $kernel_load"
 #elif defined(CONFIG_SD_BOOT)
-#define CONFIG_BOOTCOMMAND	"mmcinfo;mmc read 0x80200000 0x6800 0x800;"\
-				" fsl_mc apply dpl 0x80200000 &&" \
+#define CONFIG_BOOTCOMMAND	"mmcinfo;mmc read 0x80001000 0x6800 0x800;"\
+				" fsl_mc lazyapply dpl 0x80001000 &&" \
 				" mmc read $kernel_load $kernel_start" \
 				" $kernel_size && bootm $kernel_load"
 #else /* NOR BOOT*/
-#define CONFIG_BOOTCOMMAND	"fsl_mc apply dpl 0x580d00000 &&" \
+#define CONFIG_BOOTCOMMAND	"fsl_mc lazyapply dpl 0x580d00000 &&" \
 				" cp.b $kernel_start $kernel_load" \
 				" $kernel_size && bootm $kernel_load"
 #endif
diff --git a/include/configs/ls1088ardb.h b/include/configs/ls1088ardb.h
index 4459994eb4..d0ab2fa39e 100644
--- a/include/configs/ls1088ardb.h
+++ b/include/configs/ls1088ardb.h
@@ -381,8 +381,8 @@
 	"installer=load mmc 0:2 $load_addr "			\
 		"/flex_installer_arm64.itb; "			\
 		"env exists mcinitcmd && run mcinitcmd && "	\
-		"mmc read 0x80200000 0x6800 0x800;"		\
-		"fsl_mc apply dpl 0x80200000;"			\
+		"mmc read 0x80001000 0x6800 0x800;"		\
+		"fsl_mc lazyapply dpl 0x80001000;"			\
 		"bootm $load_addr#ls1088ardb\0"			\
 	"qspi_bootcmd=echo Trying load from qspi..;"		\
 		"sf probe && sf read $load_addr "		\
@@ -402,11 +402,11 @@
 #if defined(CONFIG_QSPI_BOOT)
 /* Try to boot an on-QSPI kernel first, then do normal distro boot */
 #define CONFIG_BOOTCOMMAND                                      \
-		"sf read 0x80200000 0xd00000 0x100000;"		\
+		"sf read 0x80001000 0xd00000 0x100000;"		\
 		"env exists mcinitcmd && env exists secureboot "	\
 		" && sf read 0x80780000 0x780000 0x100000 "	\
 		"&& esbc_validate 0x80780000;env exists mcinitcmd "	\
-		"&& fsl_mc apply dpl 0x80200000;"		\
+		"&& fsl_mc lazyapply dpl 0x80001000;"		\
 		"run distro_bootcmd;run qspi_bootcmd;"		\
 		"env exists secureboot && esbc_halt;"
 
@@ -414,11 +414,11 @@
 #elif defined(CONFIG_SD_BOOT)
 #define CONFIG_BOOTCOMMAND                                      \
 		"env exists mcinitcmd && mmcinfo; "		\
-		"mmc read 0x80200000 0x6800 0x800; "		\
+		"mmc read 0x80001000 0x6800 0x800; "		\
 		"env exists mcinitcmd && env exists secureboot "	\
 		" && mmc read 0x80780000 0x3800 0x10 "		\
 		"&& esbc_validate 0x80780000;env exists mcinitcmd "	\
-		"&& fsl_mc apply dpl 0x80200000;"		\
+		"&& fsl_mc lazyapply dpl 0x80001000;"		\
 		"run distro_bootcmd;run sd_bootcmd;"		\
 		"env exists secureboot && esbc_halt;"
 #endif