From: Bin Meng <bmeng.cn@gmail.com>
Date: Mon, 15 Jun 2015 10:40:19 +0000 (+0800)
Subject: net: designware: Program MAC address to hardware after soft reset
X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=f3edfd30541d6f245d7dfa6fa7354cc916cc53e1;p=u-boot.git

net: designware: Program MAC address to hardware after soft reset

commit f566c99 "net: Update hardware MAC address if it changes in env"
removes writing MAC address to designware controller after soft reset.
This makes designware ethernet port fail to work. Actually the MAC
address should always be programmed after soft reset.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
---

diff --git a/drivers/net/designware.c b/drivers/net/designware.c
index ae51cf3781..645ca6427c 100644
--- a/drivers/net/designware.c
+++ b/drivers/net/designware.c
@@ -243,6 +243,12 @@ static int _dw_eth_init(struct dw_eth_dev *priv, u8 *enetaddr)
 		mdelay(100);
 	};
 
+	/*
+	 * Soft reset above clears HW address registers.
+	 * So we have to set it here once again.
+	 */
+	_dw_write_hwaddr(priv, enetaddr);
+
 	rx_descs_init(priv);
 	tx_descs_init(priv);