From: Ryan Harkin <ryan.harkin@linaro.org>
Date: Wed, 18 Nov 2015 10:39:09 +0000 (+0000)
Subject: vexpress64: store env in flash
X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=f3c71c93d71dbc8994648b7f7b98210df2d0a0a6;p=u-boot.git

vexpress64: store env in flash

Add support for storing the environment in CFI NOR flash on Juno and FVP
models.

I also removed some config values that are not used by CFI flash parts.

Juno has 1 flash part with 259 sectors.  The first 255 sectors are
0x40000 (256kb) and are followed by 4 sectors of 0x10000 (64KB).

FVP models simulate a 64MB NOR flash part at base address 0x0FFC0000.
This part has 256 x 256kb sectors.  We use the last sector to store the
environment.

To save the NOR flash to a file, the following parameters should be
passed to the model:

    -C bp.flashloader1.fname=${FILENAME}
    -C bp.flashloader1.fnameWrite=${FILENAME}

Foundation models don't simulate the NOR flash, but having NOR support
in the u-boot binary does not harm:  attempting to write to the NOR will
fail gracefully.

Signed-off-by: Ryan Harkin <ryan.harkin@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
---

diff --git a/configs/vexpress_aemv8a_dram_defconfig b/configs/vexpress_aemv8a_dram_defconfig
index 72d405f74c..cad446682c 100644
--- a/configs/vexpress_aemv8a_dram_defconfig
+++ b/configs/vexpress_aemv8a_dram_defconfig
@@ -10,7 +10,6 @@ CONFIG_SYS_PROMPT="VExpress64# "
 # CONFIG_CMD_EDITENV is not set
 # CONFIG_CMD_ENV_EXISTS is not set
 # CONFIG_CMD_LOADS is not set
-# CONFIG_CMD_FLASH is not set
 # CONFIG_CMD_FPGA is not set
 # CONFIG_CMD_ITEST is not set
 # CONFIG_CMD_SETEXPR is not set
diff --git a/configs/vexpress_aemv8a_semi_defconfig b/configs/vexpress_aemv8a_semi_defconfig
index a082d2778c..e899b90687 100644
--- a/configs/vexpress_aemv8a_semi_defconfig
+++ b/configs/vexpress_aemv8a_semi_defconfig
@@ -10,7 +10,6 @@ CONFIG_SYS_PROMPT="VExpress64# "
 # CONFIG_CMD_EDITENV is not set
 # CONFIG_CMD_ENV_EXISTS is not set
 # CONFIG_CMD_LOADS is not set
-# CONFIG_CMD_FLASH is not set
 # CONFIG_CMD_FPGA is not set
 # CONFIG_CMD_ITEST is not set
 # CONFIG_CMD_SETEXPR is not set
diff --git a/include/configs/vexpress_aemv8a.h b/include/configs/vexpress_aemv8a.h
index 6734d7e1fa..c767f90e88 100644
--- a/include/configs/vexpress_aemv8a.h
+++ b/include/configs/vexpress_aemv8a.h
@@ -276,10 +276,6 @@
 
 #endif
 
-/* Do not preserve environment */
-#define CONFIG_ENV_IS_NOWHERE		1
-#define CONFIG_ENV_SIZE			0x1000
-
 /* Monitor Command Prompt */
 #define CONFIG_SYS_CBSIZE		512	/* Console I/O Buffer Size */
 #define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
@@ -290,28 +286,35 @@
 #define CONFIG_CMDLINE_EDITING
 #define CONFIG_SYS_MAXARGS		64	/* max command args */
 
-/* Flash memory is available on the Juno board only */
-#ifndef CONFIG_TARGET_VEXPRESS64_JUNO
-#define CONFIG_SYS_NO_FLASH
+#ifdef CONFIG_TARGET_VEXPRESS64_JUNO
+#define CONFIG_SYS_FLASH_BASE		0x08000000
+/* 255 x 256KiB sectors + 4 x 64KiB sectors at the end = 259 */
+#define CONFIG_SYS_MAX_FLASH_SECT	259
+/* Store environment at top of flash in the same location as blank.img */
+/* in the Juno firmware. */
+#define CONFIG_ENV_ADDR			0x0BFC0000
+#define CONFIG_ENV_SECT_SIZE		0x00010000
 #else
+#define CONFIG_SYS_FLASH_BASE		0x0C000000
+/* 256 x 256KiB sectors */
+#define CONFIG_SYS_MAX_FLASH_SECT	256
+/* Store environment at top of flash */
+#define CONFIG_ENV_ADDR			0x0FFC0000
+#define CONFIG_ENV_SECT_SIZE		0x00040000
+#endif
+
 #define CONFIG_CMD_ARMFLASH
 #define CONFIG_SYS_FLASH_CFI		1
 #define CONFIG_FLASH_CFI_DRIVER		1
 #define CONFIG_SYS_FLASH_CFI_WIDTH	FLASH_CFI_32BIT
-#define CONFIG_SYS_FLASH_BASE		0x08000000
-#define CONFIG_SYS_FLASH_SIZE		0x04000000 /* 64 MiB */
-#define CONFIG_SYS_MAX_FLASH_BANKS	2
+#define CONFIG_SYS_MAX_FLASH_BANKS	1
 
-/* Timeout values in ticks */
-#define CONFIG_SYS_FLASH_ERASE_TOUT	(2 * CONFIG_SYS_HZ) /* Erase Timeout */
-#define CONFIG_SYS_FLASH_WRITE_TOUT	(2 * CONFIG_SYS_HZ) /* Write Timeout */
-
-/* 255 0x40000 sectors + first or last sector may have 4 erase regions = 259 */
-#define CONFIG_SYS_MAX_FLASH_SECT	259		/* Max sectors */
 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE /* use buffered writes */
 #define CONFIG_SYS_FLASH_PROTECTION	/* The devices have real protection */
 #define CONFIG_SYS_FLASH_EMPTY_INFO	/* flinfo indicates empty blocks */
+#define FLASH_MAX_SECTOR_SIZE		0x00040000
+#define CONFIG_ENV_SIZE			CONFIG_ENV_SECT_SIZE
+#define CONFIG_ENV_IS_IN_FLASH		1
 
-#endif
 
 #endif /* __VEXPRESS_AEMV8A_H */