From: Miquel Raynal Date: Wed, 28 Feb 2018 19:51:44 +0000 (+0100) Subject: mtd: nand: sunxi: fix ECC strength choice X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=f3aff376892a5af55a090d29e53e10391f886d80;p=u-boot.git mtd: nand: sunxi: fix ECC strength choice When the requested ECC strength does not exactly match the strengths supported by the ECC engine, the driver is selecting the closest strength meeting the 'selected_strength > requested_strength' constraint. Fix the fact that, in this particular case, ecc->strength value was not updated to match the 'selected_strength'. For instance, one can encounter this issue when no ECC requirement is filled in the device tree while the NAND chip minimum requirement is not a strength/step_size combo natively supported by the ECC engine. Suggested-by: Boris Brezillon Signed-off-by: Miquel Raynal Acked-by: Boris Brezillon Signed-off-by: Maxime Ripard --- diff --git a/drivers/mtd/nand/sunxi_nand.c b/drivers/mtd/nand/sunxi_nand.c index 532e03cd84..37160aaec2 100644 --- a/drivers/mtd/nand/sunxi_nand.c +++ b/drivers/mtd/nand/sunxi_nand.c @@ -1407,8 +1407,14 @@ static int sunxi_nand_hw_common_ecc_ctrl_init(struct mtd_info *mtd, /* Add ECC info retrieval from DT */ for (i = 0; i < ARRAY_SIZE(strengths); i++) { - if (ecc->strength <= strengths[i]) + if (ecc->strength <= strengths[i]) { + /* + * Update ecc->strength value with the actual strength + * that will be used by the ECC engine. + */ + ecc->strength = strengths[i]; break; + } } if (i >= ARRAY_SIZE(strengths)) {