From: Michal Simek Date: Wed, 23 Nov 2022 11:48:44 +0000 (+0100) Subject: xilinx: Add option to select SC id instead of DUT id for SC support X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=f3538a3cbe8aa29e5b7188e223f926da79788d63;p=u-boot.git xilinx: Add option to select SC id instead of DUT id for SC support Reading MAC address from on board EEPROM requires different type for System Controller (SC). Signed-off-by: Michal Simek Link: https://lore.kernel.org/r/90bb7cc5463568a690b979f18c8d42556986b46d.1669204122.git.michal.simek@amd.com --- diff --git a/board/xilinx/Kconfig b/board/xilinx/Kconfig index 746a2332ad..7b31d7eaed 100644 --- a/board/xilinx/Kconfig +++ b/board/xilinx/Kconfig @@ -82,3 +82,12 @@ config CMD_FRU information present in the device. The FRU Information is used to primarily to provide "inventory" information about the boards that the FRU Information Device is located on. + +config FRU_SC + bool "FRU system controller decoding" + help + Xilinx System Controller (SC) FRU format is describing boards from two + angles. One from DUT and then from SC. DUT is default option for + the main CPU. SC behaves more or less as slave and have different ID. + If you build U-Boot for SC you should enable this option to get proper + MAC address. diff --git a/board/xilinx/common/fru.h b/board/xilinx/common/fru.h index 59f6b722cf..586c41b66e 100644 --- a/board/xilinx/common/fru.h +++ b/board/xilinx/common/fru.h @@ -90,6 +90,7 @@ struct fru_table { #define FRU_MULTIREC_MAC_OFFSET 4 #define FRU_LAST_REC BIT(7) #define FRU_DUT_MACID 0x31 +#define FRU_SC_MACID 0x11 /* This should be minimum of fields */ #define FRU_BOARD_AREA_TOTAL_FIELDS 5 diff --git a/board/xilinx/common/fru_ops.c b/board/xilinx/common/fru_ops.c index 49846ae3d6..c4f009affc 100644 --- a/board/xilinx/common/fru_ops.c +++ b/board/xilinx/common/fru_ops.c @@ -239,8 +239,12 @@ static int fru_parse_multirec(unsigned long addr) if (mrc.rec_type == FRU_MULTIREC_TYPE_OEM) { struct fru_multirec_mac *mac = (void *)addr + hdr_len; + u32 type = FRU_DUT_MACID; - if (mac->ver == FRU_DUT_MACID) { + if (CONFIG_IS_ENABLED(FRU_SC)) + type = FRU_SC_MACID; + + if (mac->ver == type) { mac_len = mrc.len - FRU_MULTIREC_MAC_OFFSET; memcpy(&fru_data.mac.macid, mac->macid, mac_len); }