From: Tim Harvey <tharvey@gateworks.com>
Date: Tue, 1 Mar 2022 20:15:02 +0000 (-0800)
Subject: net: eth-phy: prevent undesired de-assertion of phy-reset on request
X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=f3409d7ae6127b6aa33ec9cdb63808745ed4b56e;p=u-boot.git

net: eth-phy: prevent undesired de-assertion of phy-reset on request

When gpio_request_by_name allocates a gpio output it by default will
de-assert the gpio which for phy-reset will take the PHY out of reset.
As this occurs before eth_phy_reset is called to assert the reset
line it can cause undesired affects if reset timings are not properly
met.

Configure the gpio with GPIOD_IS_OUT_ACTIVE so that reset is kept active
(reset asserted) to avoid this.

Cc: Sean Anderson <sean.anderson@seco.com>
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
---

diff --git a/drivers/net/eth-phy-uclass.c b/drivers/net/eth-phy-uclass.c
index 1f285f7afd..27b77444a0 100644
--- a/drivers/net/eth-phy-uclass.c
+++ b/drivers/net/eth-phy-uclass.c
@@ -137,7 +137,7 @@ static int eth_phy_of_to_plat(struct udevice *dev)
 	/* search "reset-gpios" in phy node */
 	ret = gpio_request_by_name(dev, "reset-gpios", 0,
 				   &uc_priv->reset_gpio,
-				   GPIOD_IS_OUT);
+				   GPIOD_IS_OUT | GPIOD_IS_OUT_ACTIVE);
 	if (ret && ret != -ENOENT)
 		return ret;