From: Miquel Raynal Date: Tue, 7 May 2019 12:18:49 +0000 (+0200) Subject: arm: spear: Use PUSH/POP mnemonics when relevant X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=f30765b74896bcd604decc46e341035f7f3b4961;p=u-boot.git arm: spear: Use PUSH/POP mnemonics when relevant Quoting ARM "RealView Compilation Tools Assembler Guide v4.0": PUSH and POP are synonyms for STMDB and LDM (or LDMIA), with the base register sp (r13), and the adjusted address written back to the base register. PUSH and POP are the preferred mnemonic in these cases. Let's follow this recommandation to ease the reading and substitute LDMIA/STMDB operations with PUSH/POP mnemonics. Signed-off-by: Miquel Raynal Reviewed-by: Stefan Roese --- diff --git a/arch/arm/cpu/arm926ejs/spear/start.S b/arch/arm/cpu/arm926ejs/spear/start.S index 566cf668b7..25895f01ac 100644 --- a/arch/arm/cpu/arm926ejs/spear/start.S +++ b/arch/arm/cpu/arm926ejs/spear/start.S @@ -35,9 +35,9 @@ reset: * SPL has to return back to BootROM in a few cases (eg. Ethernet boot, * UART boot, USB boot): save registers in BootROM's stack. */ - stmdb sp!, {r0-r12,r14} + push {r0-r12,r14} bl cpu_init_crit - ldmia sp!, {r0-r12,pc} + pop {r0-r12,pc} /* ************************************************************************* @@ -67,6 +67,6 @@ cpu_init_crit: /* * Go setup Memory and board specific bits prior to relocation. */ - stmdb sp!, {lr} + push {lr} bl _main /* _main will call board_init_f */ - ldmia sp!, {pc} + pop {pc}