From: Baruch Siach Date: Sun, 3 Feb 2019 13:15:38 +0000 (+0200) Subject: arm: mvebu: mcbin: dts: fix PCIe reset polarity X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=f301ba55c877707e15378401247cc828740ba00e;p=u-boot.git arm: mvebu: mcbin: dts: fix PCIe reset polarity The PCIe slot PERST signal is active low. Fix the gpio signal description in the dts. This happened to work because the pcie_dw_mvebu driver sets the reset gpio level to 1 (high) to release the reset. The following commit will fix that. Signed-off-by: Baruch Siach Reviewed-by: Stefan Roese Signed-off-by: Stefan Roese --- diff --git a/arch/arm/dts/armada-8040-mcbin.dts b/arch/arm/dts/armada-8040-mcbin.dts index 7e8e2f707c..5a046d9de4 100644 --- a/arch/arm/dts/armada-8040-mcbin.dts +++ b/arch/arm/dts/armada-8040-mcbin.dts @@ -132,7 +132,7 @@ num-lanes = <4>; pinctrl-names = "default"; pinctrl-0 = <&cpm_pcie_reset_pins>; - marvell,reset-gpio = <&cpm_gpio1 20 GPIO_ACTIVE_HIGH>; /* GPIO[52] */ + marvell,reset-gpio = <&cpm_gpio1 20 GPIO_ACTIVE_LOW>; /* GPIO[52] */ status = "okay"; };