From: Simon Glass Date: Sun, 11 Jul 2021 03:14:26 +0000 (-0600) Subject: Rename SPL_ETH_SUPPORT to SPL_ETH X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=f2d7a36ec258f49eb80c9d4a0cc6cb7e697f5d6a;p=u-boot.git Rename SPL_ETH_SUPPORT to SPL_ETH Rename this option so that CONFIG_IS_ENABLED can be used with it. Signed-off-by: Simon Glass --- diff --git a/arch/arm/mach-omap2/boot-common.c b/arch/arm/mach-omap2/boot-common.c index 1268a32503..f4d63896b6 100644 --- a/arch/arm/mach-omap2/boot-common.c +++ b/arch/arm/mach-omap2/boot-common.c @@ -104,7 +104,7 @@ void save_omap_boot_params(void) sys_boot_device = 1; break; #endif -#if defined(BOOT_DEVICE_CPGMAC) && !defined(CONFIG_SPL_ETH_SUPPORT) +#if defined(BOOT_DEVICE_CPGMAC) && !defined(CONFIG_SPL_ETH) case BOOT_DEVICE_CPGMAC: sys_boot_device = 1; break; diff --git a/board/siemens/draco/board.c b/board/siemens/draco/board.c index 01fdfb5cb4..af35bc188e 100644 --- a/board/siemens/draco/board.c +++ b/board/siemens/draco/board.c @@ -288,7 +288,7 @@ int board_late_init(void) #endif #if (defined(CONFIG_DRIVER_TI_CPSW) && !defined(CONFIG_SPL_BUILD)) || \ - (defined(CONFIG_SPL_ETH_SUPPORT) && defined(CONFIG_SPL_BUILD)) + (defined(CONFIG_SPL_ETH) && defined(CONFIG_SPL_BUILD)) static void cpsw_control(int enabled) { /* VTP can be added here */ diff --git a/board/siemens/pxm2/board.c b/board/siemens/pxm2/board.c index b5e9b4242c..de52838d77 100644 --- a/board/siemens/pxm2/board.c +++ b/board/siemens/pxm2/board.c @@ -171,7 +171,7 @@ int read_eeprom(void) } #if (defined(CONFIG_DRIVER_TI_CPSW) && !defined(CONFIG_SPL_BUILD)) || \ - (defined(CONFIG_SPL_ETH_SUPPORT) && defined(CONFIG_SPL_BUILD)) + (defined(CONFIG_SPL_ETH) && defined(CONFIG_SPL_BUILD)) static void cpsw_control(int enabled) { /* VTP can be added here */ @@ -220,7 +220,7 @@ int board_eth_init(struct bd_info *bis) { int n = 0; #if (defined(CONFIG_DRIVER_TI_CPSW) && !defined(CONFIG_SPL_BUILD)) || \ - (defined(CONFIG_SPL_ETH_SUPPORT) && defined(CONFIG_SPL_BUILD)) + (defined(CONFIG_SPL_ETH) && defined(CONFIG_SPL_BUILD)) struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE; #ifdef CONFIG_FACTORYSET int rv; diff --git a/board/tcl/sl50/board.c b/board/tcl/sl50/board.c index 4821925c02..d213608499 100644 --- a/board/tcl/sl50/board.c +++ b/board/tcl/sl50/board.c @@ -250,7 +250,7 @@ int board_late_init(void) #endif #if (defined(CONFIG_DRIVER_TI_CPSW) && !defined(CONFIG_SPL_BUILD)) || \ - (defined(CONFIG_SPL_ETH_SUPPORT) && defined(CONFIG_SPL_BUILD)) + (defined(CONFIG_SPL_ETH) && defined(CONFIG_SPL_BUILD)) static void cpsw_control(int enabled) { /* VTP can be added here */ @@ -302,7 +302,7 @@ static struct cpsw_platform_data cpsw_data = { * Build in only these cases to avoid warnings about unused variables * when we build an SPL that has neither option but full U-Boot will. */ -#if ((defined(CONFIG_SPL_ETH_SUPPORT) || defined(CONFIG_SPL_USB_ETHER)) \ +#if ((defined(CONFIG_SPL_ETH) || defined(CONFIG_SPL_USB_ETHER)) \ && defined(CONFIG_SPL_BUILD)) || \ ((defined(CONFIG_DRIVER_TI_CPSW) || \ defined(CONFIG_USB_ETHER) && defined(CONFIG_MUSB_GADGET)) && \ @@ -324,7 +324,7 @@ int board_eth_init(struct bd_info *bis) mac_addr[5] = (mac_lo & 0xFF00) >> 8; #if (defined(CONFIG_DRIVER_TI_CPSW) && !defined(CONFIG_SPL_BUILD)) || \ - (defined(CONFIG_SPL_ETH_SUPPORT) && defined(CONFIG_SPL_BUILD)) + (defined(CONFIG_SPL_ETH) && defined(CONFIG_SPL_BUILD)) if (!env_get("ethaddr")) { printf(" not set. Validating first E-fuse MAC\n"); diff --git a/board/ti/am335x/board.c b/board/ti/am335x/board.c index 5c156a5d1d..555c0aa449 100644 --- a/board/ti/am335x/board.c +++ b/board/ti/am335x/board.c @@ -588,7 +588,7 @@ void sdram_init(void) #endif #if defined(CONFIG_CLOCK_SYNTHESIZER) && (!defined(CONFIG_SPL_BUILD) || \ - (defined(CONFIG_SPL_ETH_SUPPORT) && defined(CONFIG_SPL_BUILD))) + (defined(CONFIG_SPL_ETH) && defined(CONFIG_SPL_BUILD))) static void request_and_set_gpio(int gpio, char *name, int val) { int ret; @@ -724,7 +724,7 @@ int board_init(void) #endif #if defined(CONFIG_CLOCK_SYNTHESIZER) && (!defined(CONFIG_SPL_BUILD) || \ - (defined(CONFIG_SPL_ETH_SUPPORT) && defined(CONFIG_SPL_BUILD))) + (defined(CONFIG_SPL_ETH) && defined(CONFIG_SPL_BUILD))) if (board_is_icev2()) { int rv; u32 reg; diff --git a/board/vscom/baltos/board.c b/board/vscom/baltos/board.c index 4175d41469..0007cac1aa 100644 --- a/board/vscom/baltos/board.c +++ b/board/vscom/baltos/board.c @@ -379,7 +379,7 @@ int board_late_init(void) #endif #if (defined(CONFIG_DRIVER_TI_CPSW) && !defined(CONFIG_SPL_BUILD)) || \ - (defined(CONFIG_SPL_ETH_SUPPORT) && defined(CONFIG_SPL_BUILD)) + (defined(CONFIG_SPL_ETH) && defined(CONFIG_SPL_BUILD)) static void cpsw_control(int enabled) { /* VTP can be added here */ @@ -421,7 +421,7 @@ static struct cpsw_platform_data cpsw_data = { }; #endif -#if ((defined(CONFIG_SPL_ETH_SUPPORT) || defined(CONFIG_SPL_USB_ETHER)) \ +#if ((defined(CONFIG_SPL_ETH) || defined(CONFIG_SPL_USB_ETHER)) \ && defined(CONFIG_SPL_BUILD)) || \ ((defined(CONFIG_DRIVER_TI_CPSW) || \ defined(CONFIG_USB_ETHER) && defined(CONFIG_USB_MUSB_GADGET)) && \ @@ -450,7 +450,7 @@ int board_eth_init(struct bd_info *bis) mac_addr[5] = (mac_lo & 0xFF00) >> 8; #if (defined(CONFIG_DRIVER_TI_CPSW) && !defined(CONFIG_SPL_BUILD)) || \ - (defined(CONFIG_SPL_ETH_SUPPORT) && defined(CONFIG_SPL_BUILD)) + (defined(CONFIG_SPL_ETH) && defined(CONFIG_SPL_BUILD)) if (!env_get("ethaddr")) { printf(" not set. Validating first E-fuse MAC\n"); diff --git a/common/spl/Kconfig b/common/spl/Kconfig index 41108350af..6d442652a5 100644 --- a/common/spl/Kconfig +++ b/common/spl/Kconfig @@ -582,7 +582,7 @@ config SPL_SAVEENV "reboot_image" and act accordingly and change the reboot_image to default mode using setenv and save the environment. -config SPL_ETH_SUPPORT +config SPL_ETH bool "Support Ethernet" depends on SPL_ENV_SUPPORT help @@ -926,7 +926,7 @@ config SPL_NET_SUPPORT This permits SPL to load U-Boot over a network link rather than from an on-board peripheral. Environment support is required since the network stack uses a number of environment variables. See also - SPL_ETH_SUPPORT. + SPL_ETH. if SPL_NET_SUPPORT config SPL_NET_VCI_STRING @@ -1229,7 +1229,7 @@ config SPL_USB_ETHER USB-connected Ethernet link (such as a USB Ethernet dongle) rather than from an onboard peripheral. Environment support is required since the network stack uses a number of environment variables. - See also SPL_NET_SUPPORT and SPL_ETH_SUPPORT. + See also SPL_NET_SUPPORT and SPL_ETH. config SPL_DFU bool "Support DFU (Device Firmware Upgrade)" diff --git a/common/spl/spl_net.c b/common/spl/spl_net.c index e140a6306f..d23b395ab9 100644 --- a/common/spl/spl_net.c +++ b/common/spl/spl_net.c @@ -15,7 +15,7 @@ #include #include -#if defined(CONFIG_SPL_ETH_SUPPORT) || defined(CONFIG_SPL_USB_ETHER) +#if defined(CONFIG_SPL_ETH) || defined(CONFIG_SPL_USB_ETHER) static ulong spl_net_load_read(struct spl_load_info *load, ulong sector, ulong count, void *buf) { @@ -69,7 +69,7 @@ static int spl_net_load_image(struct spl_image_info *spl_image, } #endif -#ifdef CONFIG_SPL_ETH_SUPPORT +#ifdef CONFIG_SPL_ETH int spl_net_load_image_cpgmac(struct spl_image_info *spl_image, struct spl_boot_device *bootdev) { diff --git a/configs/am335x_evm_defconfig b/configs/am335x_evm_defconfig index c48be6bde1..c18c1ec36d 100644 --- a/configs/am335x_evm_defconfig +++ b/configs/am335x_evm_defconfig @@ -14,7 +14,7 @@ CONFIG_LOGLEVEL=3 CONFIG_SYS_CONSOLE_INFO_QUIET=y CONFIG_ARCH_MISC_INIT=y CONFIG_SPL_FIT_IMAGE_TINY=y -CONFIG_SPL_ETH_SUPPORT=y +CONFIG_SPL_ETH=y # CONFIG_SPL_FS_EXT4 is not set CONFIG_SPL_MTD_SUPPORT=y CONFIG_SPL_MUSB_NEW_SUPPORT=y diff --git a/configs/am335x_guardian_defconfig b/configs/am335x_guardian_defconfig index 2e31f20f25..75c196b21b 100644 --- a/configs/am335x_guardian_defconfig +++ b/configs/am335x_guardian_defconfig @@ -29,7 +29,7 @@ CONFIG_ARCH_MISC_INIT=y CONFIG_SPL_SEPARATE_BSS=y # CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR is not set CONFIG_SPL_ENV_SUPPORT=y -CONFIG_SPL_ETH_SUPPORT=y +CONFIG_SPL_ETH=y CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_MUSB_NEW_SUPPORT=y CONFIG_SPL_NAND_DRIVERS=y diff --git a/configs/am43xx_evm_defconfig b/configs/am43xx_evm_defconfig index ae1fffddb2..0ace38d785 100644 --- a/configs/am43xx_evm_defconfig +++ b/configs/am43xx_evm_defconfig @@ -15,7 +15,7 @@ CONFIG_SPL_LOAD_FIT=y CONFIG_BOOTCOMMAND="run findfdt; run finduuid; run distro_bootcmd" CONFIG_SYS_CONSOLE_INFO_QUIET=y # CONFIG_MISC_INIT_R is not set -CONFIG_SPL_ETH_SUPPORT=y +CONFIG_SPL_ETH=y CONFIG_SPL_MTD_SUPPORT=y CONFIG_SPL_NAND_DRIVERS=y CONFIG_SPL_NAND_ECC=y diff --git a/configs/am43xx_hs_evm_defconfig b/configs/am43xx_hs_evm_defconfig index 62c1ecbfed..94b5fd7a3c 100644 --- a/configs/am43xx_hs_evm_defconfig +++ b/configs/am43xx_hs_evm_defconfig @@ -24,7 +24,7 @@ CONFIG_OF_BOARD_SETUP=y CONFIG_BOOTCOMMAND="run findfdt; run finduuid; run distro_bootcmd" CONFIG_SYS_CONSOLE_INFO_QUIET=y # CONFIG_MISC_INIT_R is not set -CONFIG_SPL_ETH_SUPPORT=y +CONFIG_SPL_ETH=y CONFIG_SPL_MTD_SUPPORT=y CONFIG_SPL_NAND_DRIVERS=y CONFIG_SPL_NAND_ECC=y diff --git a/doc/SPL/README.am335x-network b/doc/SPL/README.am335x-network index e3cf93f8dc..e05270673d 100644 --- a/doc/SPL/README.am335x-network +++ b/doc/SPL/README.am335x-network @@ -8,7 +8,7 @@ NAND and bricked (empty) board with only a network cable. I. Building the required images 1. You have to enable generic SPL configuration options (see doc/README.SPL) as well as CONFIG_SPL_NET_SUPPORT, -CONFIG_ETH_SUPPORT, CONFIG_SPL_LIBGENERIC_SUPPORT and +CONFIG_SPL_ETH, CONFIG_SPL_LIBGENERIC_SUPPORT and CONFIG_SPL_LIBCOMMON_SUPPORT in your board configuration file to build SPL with support for booting over the network. Also you have to enable the driver for the NIC used and CONFIG_SPL_BOARD_INIT option if your diff --git a/drivers/Makefile b/drivers/Makefile index edff823e05..10d28f47fc 100644 --- a/drivers/Makefile +++ b/drivers/Makefile @@ -50,8 +50,8 @@ obj-$(CONFIG_SPL_POWER) += power/regulator/ obj-$(CONFIG_SPL_POWER_DOMAIN) += power/domain/ obj-$(CONFIG_SPL_DM_RESET) += reset/ obj-$(CONFIG_SPL_DMA) += dma/ -obj-$(CONFIG_SPL_ETH_SUPPORT) += net/ -obj-$(CONFIG_SPL_ETH_SUPPORT) += net/phy/ +obj-$(CONFIG_SPL_ETH) += net/ +obj-$(CONFIG_SPL_ETH) += net/phy/ obj-$(CONFIG_SPL_USB_ETHER) += net/phy/ obj-$(CONFIG_SPL_MUSB_NEW_SUPPORT) += usb/musb-new/ obj-$(CONFIG_SPL_USB_GADGET) += usb/gadget/ diff --git a/include/configs/topic_miami.h b/include/configs/topic_miami.h index b668817c6c..18179e9b7e 100644 --- a/include/configs/topic_miami.h +++ b/include/configs/topic_miami.h @@ -17,7 +17,7 @@ /* Fixup settings */ /* SPL settings */ -#undef CONFIG_SPL_ETH_SUPPORT +#undef CONFIG_SPL_ETH #undef CONFIG_SPL_MAX_FOOTPRINT #define CONFIG_SPL_MAX_FOOTPRINT CONFIG_SYS_SPI_U_BOOT_OFFS #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"