From: Yuantian Tang Date: Wed, 10 Apr 2019 08:43:35 +0000 (+0800) Subject: armv8: ls1028aqds: Add support of LS1028AQDS X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=f278a217491a0072629480010868eb1ffda407a6;p=u-boot.git armv8: ls1028aqds: Add support of LS1028AQDS LS1028AQDS Development System is a high-performance computing, evaluation, and development platform that supports LS1028A QorIQ Architecture processor. Signed-off-by: Sudhanshu Gupta Signed-off-by: Rai Harninder Signed-off-by: Rajesh Bhagat Signed-off-by: Bhaskar Upadhaya Signed-off-by: Tang yuantian Signed-off-by: Prabhakar Kushwaha --- diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 0c9b035352..efb9aab390 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1262,6 +1262,17 @@ config TARGET_LS1012AFRDM development platform that supports the QorIQ LS1012A Layerscape Architecture processor. +config TARGET_LS1028AQDS + bool "Support ls1028aqds" + select ARCH_LS1028A + select ARM64 + select ARMV8_MULTIENTRY + help + Support for Freescale LS1028AQDS platform + The LS1028A Development System (QDS) is a high-performance + development platform that supports the QorIQ LS1028A + Layerscape Architecture processor. + config TARGET_LS1028ARDB bool "Support ls1028ardb" select ARCH_LS1028A diff --git a/arch/arm/cpu/armv8/Kconfig b/arch/arm/cpu/armv8/Kconfig index 54831f7905..8a97d5b3fb 100644 --- a/arch/arm/cpu/armv8/Kconfig +++ b/arch/arm/cpu/armv8/Kconfig @@ -104,7 +104,7 @@ config PSCI_RESET !TARGET_LS1012ARDB && !TARGET_LS1012AFRDM && \ !TARGET_LS1012A2G5RDB && !TARGET_LS1012AQDS && \ !TARGET_LS1012AFRWY && \ - !TARGET_LS1028ARDB && \ + !TARGET_LS1028ARDB && !TARGET_LS1028AQDS && \ !TARGET_LS1043ARDB && !TARGET_LS1043AQDS && \ !TARGET_LS1046ARDB && !TARGET_LS1046AQDS && \ !TARGET_LS2081ARDB && !TARGET_LX2160ARDB && \ diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 8855a01438..31ef2b66a3 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -330,6 +330,7 @@ dtb-$(CONFIG_FSL_LSCH3) += fsl-ls2080a-qds.dtb \ fsl-ls1088a-rdb.dtb \ fsl-ls1088a-qds.dtb \ fsl-ls1028a-rdb.dtb \ + fsl-ls1028a-qds.dtb \ fsl-lx2160a-rdb.dtb \ fsl-lx2160a-qds.dtb dtb-$(CONFIG_FSL_LSCH2) += fsl-ls1043a-qds-duart.dtb \ diff --git a/arch/arm/dts/fsl-ls1028a-qds.dts b/arch/arm/dts/fsl-ls1028a-qds.dts new file mode 100644 index 0000000000..46a0419d77 --- /dev/null +++ b/arch/arm/dts/fsl-ls1028a-qds.dts @@ -0,0 +1,88 @@ +// SPDX-License-Identifier: GPL-2.0+ OR X11 +/* + * NXP ls1028AQDS device tree source + * + * Copyright 2019 NXP + * + */ + +/dts-v1/; + +#include "fsl-ls1028a.dtsi" + +/ { + model = "NXP Layerscape 1028a QDS Board"; + compatible = "fsl,ls1028a-qds", "fsl,ls1028a"; +}; + +&dspi0 { + status = "okay"; +}; + +&dspi1 { + status = "okay"; +}; + +&dspi2 { + status = "okay"; +}; + +&esdhc0 { + status = "okay"; +}; + +&esdhc1 { + status = "okay"; +}; + +&i2c0 { + status = "okay"; +}; + +&i2c1 { + status = "okay"; +}; + +&i2c2 { + status = "okay"; +}; + +&i2c3 { + status = "okay"; +}; + +&i2c4 { + status = "okay"; +}; + +&i2c5 { + status = "okay"; +}; + +&i2c6 { + status = "okay"; +}; + +&i2c7 { + status = "okay"; +}; + +&sata { + status = "okay"; +}; + +&serial0 { + status = "okay"; +}; + +&serial1 { + status = "okay"; +}; + +&usb1 { + status = "okay"; +}; + +&usb2 { + status = "okay"; +}; diff --git a/board/freescale/ls1028a/Kconfig b/board/freescale/ls1028a/Kconfig index bbfd4dd07d..ca22c92203 100644 --- a/board/freescale/ls1028a/Kconfig +++ b/board/freescale/ls1028a/Kconfig @@ -1,3 +1,42 @@ +if TARGET_LS1028AQDS + +config SYS_BOARD + default "ls1028a" + +config SYS_VENDOR + default "freescale" + +config SYS_SOC + default "fsl-layerscape" + +config SYS_CONFIG_NAME + default "ls1028aqds" + +config EMMC_BOOT + bool "Support for booting from EMMC" + default n + +config SYS_TEXT_BASE + default 0x96000000 if SD_BOOT || EMMC_BOOT + default 0x82000000 if TFABOOT + default 0x20100000 + +if FSL_LS_PPA +config SYS_LS_PPA_FW_ADDR + hex "PPA Firmware Addr" + default 0x20400000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS1028A + default 0x400000 if SYS_LS_PPA_FW_IN_MMC && ARCH_LS1028A +if CHAIN_OF_TRUST +config SYS_LS_PPA_ESBC_ADDR + hex "PPA header Addr" + default 0x20600000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS1028A +endif +endif + +source "board/freescale/common/Kconfig" + +endif + if TARGET_LS1028ARDB config SYS_BOARD diff --git a/board/freescale/ls1028a/MAINTAINERS b/board/freescale/ls1028a/MAINTAINERS index 135454cfd6..6f1a95ea3b 100644 --- a/board/freescale/ls1028a/MAINTAINERS +++ b/board/freescale/ls1028a/MAINTAINERS @@ -1,3 +1,14 @@ +LS1028AQDS BOARD +M: Sudhanshu Gupta +M: Rai Harninder +M: Rajesh Bhagat +M: Tang Yuantian +S: Maintained +F: board/freescale/ls1028a/ +F: include/configs/ls1028a_common.h +F: include/configs/ls1028aqds.h +F: configs/ls1028aqds_tfa_defconfig + LS1028ARDB BOARD M: Sudhanshu Gupta M: Rai Harninder diff --git a/board/freescale/ls1028a/README b/board/freescale/ls1028a/README index 94a390c917..323881faa5 100644 --- a/board/freescale/ls1028a/README +++ b/board/freescale/ls1028a/README @@ -77,3 +77,88 @@ Serial audio interface(SAI) - Audio codec SGTL5000 provides headphone and audio LINEOUT for stereo speakers - IEEE1588 interface to support audio on SAI4 + +QDS Default Switch Settings (1: ON; 0: OFF) +------------------------------------------- +For SD Boot +SW1 : 1000_0000 +SW2 : 1110_0110 +SW3 : 0000_0010 +SW4 : 0000_0000 +SW5 : 0000_0000 +SW6 : 0000_0000 +SW7 : 1111_0011 +SW8 : 1110_0000 +SW9 : 1000_0001 +SW10: 1110_0000 + +For XSPI Boot +SW1 : 1111_0000 +SW2 : 0000_0110 +SW3 : 0000_0010 +SW4 : 0000_0000 +SW5 : 0110_0000 +SW6 : 0101_0000 +SW7 : 1111_0011 +SW8 : 1110_0000 +SW9 : 1000_0000 +SW10: 1110_0000 + +LS1028AQDS board Overview +------------------------- +Processor + Two Arm Cortex- A72 processor cores: + - Based on 64-bit ARMv8 architecture + - Up to 1.3 GHz operation + - Single-threaded cores with 48 KB L1 instruction cache and 32 KB L1 + data cache + - Arranged as a single cluster of two cores sharing a single 1 MB L2 + cache +DDR memory + - Supports data rates of up to 1.6 GT/s for both, DDR4 and DDR3L + - Supports a single- or dual-ranked SODIMM or UDIMM connector + - 32-bit data and 4-bit ECC + - Supports x8/x16 devices + - Supports ECC error detection and correction + - 1.35 V or 1.2 V DDR power supply, with automatic tracking of VTT, to + all devices in case of DDR3L or DDR4, respectively. Power can + switch to 1.35 V or 1.2 V, based on the switch settings for DDR3L or + DDR4 devices, respectively +SerDes (Serializer/Deserializer) + - Four-lane (0-3) SerDes: + - Lane 0: supports PCIe Gen1/2/3 with x1, x2, and x4 operation, 10 + Gbit SXGMII, 1 Gbit SGMII + - Lane 1: supports PCIe Gen1/2/3 with x1, x2, and x4 operation, 1 Gbit + SGMII, 10 Gbit QXGMII, 5 Gbit QSGMII, 1 Gbit SGMII + - Lane 2: supports PCIe Gen1/2/3 with x1, x2, and x4 operation, 1 Gbit + SGMII + - Lane 3: supports PCIe Gen1/2/3 with x1, x2, and x4 operation, 1 Gbit + SGMII, SATA 2.0/3.0 + - Four slots on SerDes lanes support PCIe Gen1/2/3, 1 Gbit SGMII + add-in cards + - Lane 1 connects to a 2x10 connector with SFP+ through a retimer; + lane 2 (TX lines) connects to an SMA connector + Lane 3 connects to 1x7 header to support SATA devices +eSDHC + - eSDHC1, eSDHC2 +SPI + - SPI1 and SPI2 support three onboard SPI flash memory devices: + 512 Mbit high-speed flash (with speed of up to 108/54 MHz) + memory for storage + 4 Mbit low-speed flash memory (with speed of up to 40 MHz) + 64 Mbit high-speed flash memory (with speed of up to 104/80 + MHz) + - SPI3 supports one onboard 64 Mbit SPI flash memory (with speed of + up to 104/80 MHz) + - All memories operate at 1.8 V + - A header is provided on SPI1 to test SPI slave mode +I2C + - LS1028A supports eight I2C controllers +Serial audio interface(SAI) + Two SAI ports with audio codec SGTL5000: + - Include stereo LINEIN with support for external analog input + - Provide headphone and line output +Display + - DisplayPort connector to connect the DP data to a 4K display device + (computer monitor) + - eDP connector to connect the DP data to a 4K display panel diff --git a/board/freescale/ls1028a/ls1028a.c b/board/freescale/ls1028a/ls1028a.c index e3666c34b6..e5de4eb70c 100644 --- a/board/freescale/ls1028a/ls1028a.c +++ b/board/freescale/ls1028a/ls1028a.c @@ -27,6 +27,35 @@ DECLARE_GLOBAL_DATA_PTR; +int config_board_mux(void) +{ +#if defined(CONFIG_TARGET_LS1028AQDS) && defined(CONFIG_FSL_QIXIS) + u8 reg; + + reg = QIXIS_READ(brdcfg[13]); + /* Field| Function + * 7-6 | Controls I2C3 routing (net CFG_MUX_I2C3): + * I2C3 | 10= Routes {SCL, SDA} to CAN1 transceiver as {TX, RX}. + * 5-4 | Controls I2C4 routing (net CFG_MUX_I2C4): + * I2C4 |11= Routes {SCL, SDA} to CAN2 transceiver as {TX, RX}. + */ + reg &= ~(0xf0); + reg |= 0xb0; + QIXIS_WRITE(brdcfg[13], reg); + + reg = QIXIS_READ(brdcfg[15]); + /* Field| Function + * 7 | Controls the CAN1 transceiver (net CFG_CAN1_STBY): + * CAN1 | 0= CAN #1 transceiver enabled + * 6 | Controls the CAN2 transceiver (net CFG_CAN2_STBY): + * CAN2 | 0= CAN #2 transceiver enabled + */ + reg &= ~(0xc0); + QIXIS_WRITE(brdcfg[15], reg); +#endif + return 0; +} + int board_init(void) { #ifdef CONFIG_ENV_IS_NOWHERE @@ -54,6 +83,15 @@ int board_eth_init(bd_t *bis) return pci_eth_init(bis); } +#if defined(CONFIG_ARCH_MISC_INIT) +int arch_misc_init(void) +{ + config_board_mux(); + + return 0; +} +#endif + int board_early_init_f(void) { #ifdef CONFIG_SYS_I2C_EARLY_INIT diff --git a/configs/ls1028aqds_tfa_defconfig b/configs/ls1028aqds_tfa_defconfig new file mode 100644 index 0000000000..b02af02c1c --- /dev/null +++ b/configs/ls1028aqds_tfa_defconfig @@ -0,0 +1,61 @@ +CONFIG_ARM=y +CONFIG_TARGET_LS1028AQDS=y +CONFIG_SYS_FSL_SDHC_CLK_DIV=1 +CONFIG_TFABOOT=y +CONFIG_NR_DRAM_BANKS=2 +CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y +CONFIG_SEC_FIRMWARE_ARMV8_PSCI=y +CONFIG_AHCI=y +CONFIG_DISTRO_DEFAULTS=y +# CONFIG_SYS_MALLOC_F is not set +CONFIG_FIT_VERBOSE=y +CONFIG_OF_BOARD_SETUP=y +CONFIG_OF_STDOUT_VIA_ALIAS=y +CONFIG_BOOTDELAY=10 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 ramdisk_size=0x2000000 default_hugepagesz=2m hugepagesz=2m hugepages=256 video=1920x1080-32@60 cma=256M" +CONFIG_CMD_GREPENV=y +CONFIG_CMD_GPT=y +CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y +CONFIG_CMD_PCI=y +CONFIG_CMD_SF=y +CONFIG_CMD_USB=y +# CONFIG_CMD_SETEXPR is not set +CONFIG_CMD_CACHE=y +CONFIG_OF_CONTROL=y +CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1028a-qds" +CONFIG_ENV_IS_IN_MMC=y +CONFIG_ENV_IS_IN_SPI_FLASH=y +CONFIG_NET_RANDOM_ETHADDR=y +CONFIG_NETCONSOLE=y +CONFIG_DM=y +CONFIG_SCSI_AHCI=y +CONFIG_SATA_CEVA=y +CONFIG_FSL_CAAM=y +CONFIG_DM_MMC=y +CONFIG_DM_SPI_FLASH=y +CONFIG_SPI_FLASH=y +CONFIG_SPI_FLASH_SPANSION=y +CONFIG_SPI_FLASH_STMICRO=y +# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set +CONFIG_PHYLIB=y +CONFIG_PHY_ATHEROS=y +CONFIG_DM_ETH=y +CONFIG_PHY_GIGE=y +CONFIG_E1000=y +CONFIG_PCI=y +CONFIG_DM_PCI=y +CONFIG_DM_PCI_COMPAT=y +CONFIG_PCIE_LAYERSCAPE=y +CONFIG_SCSI=y +CONFIG_DM_SCSI=y +CONFIG_SYS_NS16550=y +CONFIG_SPI=y +CONFIG_DM_SPI=y +CONFIG_FSL_DSPI=y +CONFIG_USB=y +CONFIG_DM_USB=y +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_XHCI_DWC3=y +CONFIG_EFI_LOADER_BOUNCE_BUFFER=y diff --git a/include/configs/ls1028aqds.h b/include/configs/ls1028aqds.h new file mode 100644 index 0000000000..be018ef2be --- /dev/null +++ b/include/configs/ls1028aqds.h @@ -0,0 +1,161 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright 2019 NXP + */ + +#ifndef __LS1028A_QDS_H +#define __LS1028A_QDS_H + +#include "ls1028a_common.h" + +#define CONFIG_SYS_CLK_FREQ 100000000 +#define CONFIG_DDR_CLK_FREQ 100000000 +#define COUNTER_FREQUENCY_REAL (CONFIG_SYS_CLK_FREQ / 4) + +/* DDR */ +#define CONFIG_DIMM_SLOTS_PER_CTLR 2 + +#define CONFIG_QIXIS_I2C_ACCESS +#define CONFIG_SYS_I2C_EARLY_INIT + +/* + * QIXIS Definitions + */ +#define CONFIG_FSL_QIXIS + +#ifdef CONFIG_FSL_QIXIS +#define QIXIS_BASE 0x7fb00000 +#define QIXIS_BASE_PHYS QIXIS_BASE +#define CONFIG_SYS_I2C_FPGA_ADDR 0x66 +#define QIXIS_LBMAP_SWITCH 1 +#define QIXIS_LBMAP_MASK 0x0f +#define QIXIS_LBMAP_SHIFT 5 +#define QIXIS_LBMAP_DFLTBANK 0x00 +#define QIXIS_LBMAP_ALTBANK 0x00 +#define QIXIS_LBMAP_SD 0x00 +#define QIXIS_LBMAP_EMMC 0x00 +#define QIXIS_LBMAP_QSPI 0x00 +#define QIXIS_RCW_SRC_SD 0x8 +#define QIXIS_RCW_SRC_EMMC 0x9 +#define QIXIS_RCW_SRC_QSPI 0xf +#define QIXIS_RST_CTL_RESET 0x31 +#define QIXIS_RCFG_CTL_RECONFIG_IDLE 0x20 +#define QIXIS_RCFG_CTL_RECONFIG_START 0x21 +#define QIXIS_RCFG_CTL_WATCHDOG_ENBLE 0x08 +#define QIXIS_RST_FORCE_MEM 0x01 + +#define CONFIG_SYS_FPGA_CSPR_EXT (0x0) +#define CONFIG_SYS_FPGA_CSPR (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) | \ + CSPR_PORT_SIZE_8 | \ + CSPR_MSEL_GPCM | \ + CSPR_V) +#define CONFIG_SYS_FPGA_AMASK IFC_AMASK(64 * 1024) +#define CONFIG_SYS_FPGA_CSOR (CSOR_NOR_ADM_SHIFT(4) | \ + CSOR_NOR_NOR_MODE_AVD_NOR | \ + CSOR_NOR_TRHZ_80) +#endif + +/* RTC */ +#define CONFIG_SYS_RTC_BUS_NUM 1 +#define I2C_MUX_CH_RTC 0xB + +/* Store environment at top of flash */ +#define CONFIG_ENV_SIZE 0x2000 + +#ifdef CONFIG_SPL_BUILD +#define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE +#else +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE +#endif + +/* SATA */ +#define CONFIG_SCSI_AHCI_PLAT + +#define CONFIG_SYS_SATA1 AHCI_BASE_ADDR1 +#ifndef CONFIG_CMD_EXT2 +#define CONFIG_CMD_EXT2 +#endif +#define CONFIG_SYS_SCSI_MAX_SCSI_ID 1 +#define CONFIG_SYS_SCSI_MAX_LUN 1 +#define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \ + CONFIG_SYS_SCSI_MAX_LUN) +/* DSPI */ +#ifdef CONFIG_FSL_DSPI +#define CONFIG_SPI_FLASH_SST +#define CONFIG_SPI_FLASH_EON +#endif + +#ifndef SPL_NO_ENV +#undef CONFIG_EXTRA_ENV_SETTINGS +#define CONFIG_EXTRA_ENV_SETTINGS \ + "board=ls1028aqds\0" \ + "hwconfig=fsl_ddr:bank_intlv=auto\0" \ + "ramdisk_addr=0x800000\0" \ + "ramdisk_size=0x2000000\0" \ + "fdt_high=0xffffffffffffffff\0" \ + "initrd_high=0xffffffffffffffff\0" \ + "fdt_addr=0x00f00000\0" \ + "kernel_addr=0x01000000\0" \ + "scriptaddr=0x80000000\0" \ + "scripthdraddr=0x80080000\0" \ + "fdtheader_addr_r=0x80100000\0" \ + "kernelheader_addr_r=0x80200000\0" \ + "load_addr=0xa0000000\0" \ + "kernel_addr_r=0x81000000\0" \ + "fdt_addr_r=0x90000000\0" \ + "ramdisk_addr_r=0xa0000000\0" \ + "kernel_start=0x1000000\0" \ + "kernelheader_start=0x800000\0" \ + "kernel_load=0xa0000000\0" \ + "kernel_size=0x2800000\0" \ + "kernelheader_size=0x40000\0" \ + "kernel_addr_sd=0x8000\0" \ + "kernel_size_sd=0x14000\0" \ + "kernelhdr_addr_sd=0x4000\0" \ + "kernelhdr_size_sd=0x10\0" \ + "console=ttyS0,115200\0" \ + "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \ + BOOTENV \ + "boot_scripts=ls1028aqds_boot.scr\0" \ + "boot_script_hdr=hdr_ls1028aqds_bs.out\0" \ + "scan_dev_for_boot_part=" \ + "part list ${devtype} ${devnum} devplist; " \ + "env exists devplist || setenv devplist 1; " \ + "for distro_bootpart in ${devplist}; do " \ + "if fstype ${devtype} " \ + "${devnum}:${distro_bootpart} " \ + "bootfstype; then " \ + "run scan_dev_for_boot; " \ + "fi; " \ + "done\0" \ + "scan_dev_for_boot=" \ + "echo Scanning ${devtype} " \ + "${devnum}:${distro_bootpart}...; " \ + "for prefix in ${boot_prefixes}; do " \ + "run scan_dev_for_scripts; " \ + "done;" \ + "\0" \ + "boot_a_script=" \ + "load ${devtype} ${devnum}:${distro_bootpart} " \ + "${scriptaddr} ${prefix}${script}; " \ + "env exists secureboot && load ${devtype} " \ + "${devnum}:${distro_bootpart} " \ + "${scripthdraddr} ${prefix}${boot_script_hdr} " \ + "&& esbc_validate ${scripthdraddr};" \ + "source ${scriptaddr}\0" \ + "sd_bootcmd=echo Trying load from SD ..;" \ + "mmcinfo; mmc read $load_addr " \ + "$kernel_addr_sd $kernel_size_sd && " \ + "env exists secureboot && mmc read $kernelheader_addr_r " \ + "$kernelhdr_addr_sd $kernelhdr_size_sd " \ + " && esbc_validate ${kernelheader_addr_r};" \ + "bootm $load_addr#$board\0" \ + "emmc_bootcmd=echo Trying load from EMMC ..;" \ + "mmcinfo; mmc dev 1; mmc read $load_addr " \ + "$kernel_addr_sd $kernel_size_sd && " \ + "env exists secureboot && mmc read $kernelheader_addr_r " \ + "$kernelhdr_addr_sd $kernelhdr_size_sd " \ + " && esbc_validate ${kernelheader_addr_r};" \ + "bootm $load_addr#$board\0" +#endif +#endif /* __LS1028A_QDS_H */