From: Stefan Agner Date: Wed, 16 Aug 2017 18:00:57 +0000 (-0700) Subject: apalis/colibri_imx6: enable SDP by default X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=f0e0698cee4a6410a26bdb2fbee82cfd30f31785;p=u-boot.git apalis/colibri_imx6: enable SDP by default Enable Serial Download Protocol (SDP) in SPL and U-Boot. This is useful to make use of imx_usb to download the complete U-Boot (u-boot.img) after SPL has been downloaded. The U-Boot command sdp allows to enumerate as SDP capable device again, e.g. to download a Linux kernel and/or U-Boot script. Signed-off-by: Stefan Agner Acked-by: Max Krummenacher --- diff --git a/configs/apalis_imx6_defconfig b/configs/apalis_imx6_defconfig index 468a1fcac7..8f87f1d34c 100644 --- a/configs/apalis_imx6_defconfig +++ b/configs/apalis_imx6_defconfig @@ -17,6 +17,9 @@ CONFIG_BOARD_EARLY_INIT_F=y CONFIG_SPL=y CONFIG_SPL_DMA_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y +CONFIG_SPL_USB_HOST_SUPPORT=y +CONFIG_SPL_USB_GADGET_SUPPORT=y +CONFIG_SPL_USB_SDP_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="Apalis iMX6 # " CONFIG_CMD_BOOTZ=y @@ -33,6 +36,7 @@ CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_USB=y +CONFIG_CMD_USB_SDP=y CONFIG_CMD_USB_MASS_STORAGE=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y diff --git a/configs/colibri_imx6_defconfig b/configs/colibri_imx6_defconfig index edbd87fe19..beb74b5ae5 100644 --- a/configs/colibri_imx6_defconfig +++ b/configs/colibri_imx6_defconfig @@ -17,6 +17,9 @@ CONFIG_BOARD_EARLY_INIT_F=y CONFIG_SPL=y CONFIG_SPL_DMA_SUPPORT=y CONFIG_SPL_I2C_SUPPORT=y +CONFIG_SPL_USB_HOST_SUPPORT=y +CONFIG_SPL_USB_GADGET_SUPPORT=y +CONFIG_SPL_USB_SDP_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="Colibri iMX6 # " CONFIG_CMD_BOOTZ=y @@ -33,6 +36,7 @@ CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_USB=y +CONFIG_CMD_USB_SDP=y CONFIG_CMD_USB_MASS_STORAGE=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y