From: Quentin Schulz Date: Fri, 24 May 2024 09:23:33 +0000 (+0200) Subject: rockchip: px30/rk3326: migrate to OF_UPSTREAM X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=f087f7fd277d;p=u-boot.git rockchip: px30/rk3326: migrate to OF_UPSTREAM Migrate PX30/RK3326 boards that exists in Linux v6.8 to use OF_UPSTREAM. firefly-px30 is not migrated to OF_UPSTREAM because there's no Device Tree in the Linux kernel. Differences between U-Boot's Odroid-Go2 and Linux's are now moved to the -u-boot.dtsi, though I have a gut feeling that the existing cru overrides aren't necessary (anymore?). The U-Boot GPIO led-0 is on GPIO0_C1 but such is the pin of PWM3 which is used for Linux's PWM led-2 so keep Linux's. I also doubt vcc_cam is actually used, though the Odroid-Go2 Black Edition uses this dcdc regulator for WiFi, so let's just move it to the -u-boot.dtsi to play it safe. Signed-off-by: Quentin Schulz --- diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index cef42ab53a..97eb14d3ca 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -52,14 +52,6 @@ dtb-$(CONFIG_MACH_S900) += \ dtb-$(CONFIG_MACH_S700) += \ s700-cubieboard7.dtb -dtb-$(CONFIG_ROCKCHIP_PX30) += \ - px30-evb.dtb \ - px30-firefly.dtb \ - px30-engicam-px30-core-ctouch2.dtb \ - px30-engicam-px30-core-ctouch2-of10.dtb \ - px30-engicam-px30-core-edimm2.2.dtb \ - rk3326-odroid-go2.dtb - dtb-$(CONFIG_ROCKCHIP_RK3036) += \ rk3036-sdk.dtb diff --git a/arch/arm/dts/px30-engicam-common.dtsi b/arch/arm/dts/px30-engicam-common.dtsi deleted file mode 100644 index 3429e124d9..0000000000 --- a/arch/arm/dts/px30-engicam-common.dtsi +++ /dev/null @@ -1,129 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2020 Engicam srl - * Copyright (c) 2020 Amarula Solutions - * Copyright (c) 2020 Amarula Solutions(India) - */ - -/ { - aliases { - mmc1 = &sdmmc; - mmc2 = &sdio; - }; - - vcc5v0_sys: vcc5v0-sys { - compatible = "regulator-fixed"; - regulator-name = "vcc5v0_sys"; /* +5V */ - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - }; - - sdio_pwrseq: sdio-pwrseq { - compatible = "mmc-pwrseq-simple"; - clocks = <&xin32k>; - clock-names = "ext_clock"; - post-power-on-delay-ms = <80>; - pinctrl-names = "default"; - pinctrl-0 = <&wifi_enable_h>; - }; - - vcc3v3_btreg: vcc3v3-btreg { - compatible = "regulator-gpio"; - enable-active-high; - pinctrl-names = "default"; - pinctrl-0 = <&bt_enable_h>; - regulator-name = "btreg-gpio-supply"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - states = <3300000 0x0>; - }; - - vcc3v3_rf_aux_mod: vcc3v3-rf-aux-mod { - compatible = "regulator-fixed"; - regulator-name = "vcc3v3_rf_aux_mod"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - regulator-boot-on; - vin-supply = <&vcc5v0_sys>; - }; - - xin32k: xin32k { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <32768>; - clock-output-names = "xin32k"; - }; -}; - -&sdio { - #address-cells = <1>; - #size-cells = <0>; - bus-width = <4>; - clock-frequency = <50000000>; - cap-sdio-irq; - cap-sd-highspeed; - keep-power-in-suspend; - mmc-pwrseq = <&sdio_pwrseq>; - non-removable; - sd-uhs-sdr104; - status = "okay"; - - brcmf: wifi@1 { - compatible = "brcm,bcm4329-fmac"; - reg = <1>; - }; -}; - -&gmac { - clock_in_out = "output"; - phy-supply = <&vcc_3v3>; /* +3V3_SOM */ - snps,reset-active-low; - snps,reset-delays-us = <0 50000 50000>; - snps,reset-gpio = <&gpio2 RK_PB5 GPIO_ACTIVE_HIGH>; - status = "okay"; -}; - -&pwm0 { - status = "okay"; -}; - -&sdmmc { - cap-sd-highspeed; - card-detect-delay = <800>; - vmmc-supply = <&vcc_3v3>; /* +3V3_SOM */ - vqmmc-supply = <&vcc_3v3>; - status = "okay"; -}; - -&u2phy { - status = "okay"; - - u2phy_host: host-port { - status = "okay"; - }; - - u2phy_otg: otg-port { - status = "okay"; - }; -}; - -&uart2 { - pinctrl-0 = <&uart2m1_xfer>; - status = "okay"; -}; - -&usb20_otg { - status = "okay"; -}; - -&usb_host0_ehci { - status = "okay"; -}; - -&usb_host0_ohci { - status = "okay"; -}; diff --git a/arch/arm/dts/px30-engicam-ctouch2.dtsi b/arch/arm/dts/px30-engicam-ctouch2.dtsi deleted file mode 100644 index bf10a3d29f..0000000000 --- a/arch/arm/dts/px30-engicam-ctouch2.dtsi +++ /dev/null @@ -1,30 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2020 Engicam srl - * Copyright (c) 2020 Amarula Solutions - * Copyright (c) 2020 Amarula Solutions(India) - */ - -#include "px30-engicam-common.dtsi" - -&pinctrl { - bt { - bt_enable_h: bt-enable-h { - rockchip,pins = <1 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - sdio-pwrseq { - wifi_enable_h: wifi-enable-h { - rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; -}; - -&sdio_pwrseq { - reset-gpios = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>; -}; - -&vcc3v3_btreg { - enable-gpio = <&gpio1 RK_PC3 GPIO_ACTIVE_HIGH>; -}; diff --git a/arch/arm/dts/px30-engicam-edimm2.2.dtsi b/arch/arm/dts/px30-engicam-edimm2.2.dtsi deleted file mode 100644 index 449b8eb645..0000000000 --- a/arch/arm/dts/px30-engicam-edimm2.2.dtsi +++ /dev/null @@ -1,66 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2020 Engicam srl - * Copyright (c) 2020 Amarula Solutions(India) - */ - -#include "px30-engicam-common.dtsi" - -/ { - backlight: backlight { - compatible = "pwm-backlight"; - pwms = <&pwm0 0 25000 0>; - }; - - panel { - compatible = "yes-optoelectronics,ytc700tlag-05-201c"; - backlight = <&backlight>; - data-mapping = "vesa-24"; - power-supply = <&vcc3v3_lcd>; - - port { - panel_in_lvds: endpoint { - remote-endpoint = <&lvds_out_panel>; - }; - }; - }; -}; - -&display_subsystem { - status = "okay"; -}; - -&dsi_dphy { - status = "okay"; -}; - -/* LVDS_B(secondary) */ -&lvds { - status = "okay"; - - ports { - port@1 { - reg = <1>; - - lvds_out_panel: endpoint { - remote-endpoint = <&panel_in_lvds>; - }; - }; - }; -}; - -&vopb { - status = "okay"; -}; - -&vopb_mmu { - status = "okay"; -}; - -&vopl { - status = "okay"; -}; - -&vopl_mmu { - status = "okay"; -}; diff --git a/arch/arm/dts/px30-engicam-px30-core-ctouch2-of10.dts b/arch/arm/dts/px30-engicam-px30-core-ctouch2-of10.dts deleted file mode 100644 index 47aa30505a..0000000000 --- a/arch/arm/dts/px30-engicam-px30-core-ctouch2-of10.dts +++ /dev/null @@ -1,77 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2020 Fuzhou Rockchip Electronics Co., Ltd - * Copyright (c) 2020 Engicam srl - * Copyright (c) 2020 Amarula Solutions(India) - */ - -/dts-v1/; -#include "px30.dtsi" -#include "px30-engicam-ctouch2.dtsi" -#include "px30-engicam-px30-core.dtsi" - -/ { - model = "Engicam PX30.Core C.TOUCH 2.0 10.1\" Open Frame"; - compatible = "engicam,px30-core-ctouch2-of10", "engicam,px30-core", - "rockchip,px30"; - - backlight: backlight { - compatible = "pwm-backlight"; - pwms = <&pwm0 0 25000 0>; - }; - - chosen { - stdout-path = "serial2:115200n8"; - }; - - panel { - compatible = "ampire,am-1280800n3tzqw-t00h"; - backlight = <&backlight>; - power-supply = <&vcc3v3_lcd>; - data-mapping = "vesa-24"; - - port { - panel_in_lvds: endpoint { - remote-endpoint = <&lvds_out_panel>; - }; - }; - }; -}; - -&display_subsystem { - status = "okay"; -}; - -&dsi_dphy { - status = "okay"; -}; - -&lvds { - status = "okay"; - - ports { - port@1 { - reg = <1>; - - lvds_out_panel: endpoint { - remote-endpoint = <&panel_in_lvds>; - }; - }; - }; -}; - -&vopb { - status = "okay"; -}; - -&vopb_mmu { - status = "okay"; -}; - -&vopl { - status = "okay"; -}; - -&vopl_mmu { - status = "okay"; -}; diff --git a/arch/arm/dts/px30-engicam-px30-core-ctouch2.dts b/arch/arm/dts/px30-engicam-px30-core-ctouch2.dts deleted file mode 100644 index 5a0ecb8fae..0000000000 --- a/arch/arm/dts/px30-engicam-px30-core-ctouch2.dts +++ /dev/null @@ -1,22 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2020 Fuzhou Rockchip Electronics Co., Ltd - * Copyright (c) 2020 Engicam srl - * Copyright (c) 2020 Amarula Solutions - * Copyright (c) 2020 Amarula Solutions(India) - */ - -/dts-v1/; -#include "px30.dtsi" -#include "px30-engicam-ctouch2.dtsi" -#include "px30-engicam-px30-core.dtsi" - -/ { - model = "Engicam PX30.Core C.TOUCH 2.0"; - compatible = "engicam,px30-core-ctouch2", "engicam,px30-core", - "rockchip,px30"; - - chosen { - stdout-path = "serial2:115200n8"; - }; -}; diff --git a/arch/arm/dts/px30-engicam-px30-core-edimm2.2.dts b/arch/arm/dts/px30-engicam-px30-core-edimm2.2.dts deleted file mode 100644 index d759478e1c..0000000000 --- a/arch/arm/dts/px30-engicam-px30-core-edimm2.2.dts +++ /dev/null @@ -1,43 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2020 Fuzhou Rockchip Electronics Co., Ltd - * Copyright (c) 2020 Engicam srl - * Copyright (c) 2020 Amarula Solutions(India) - */ - -/dts-v1/; -#include "px30.dtsi" -#include "px30-engicam-edimm2.2.dtsi" -#include "px30-engicam-px30-core.dtsi" - -/ { - model = "Engicam PX30.Core EDIMM2.2 Starter Kit"; - compatible = "engicam,px30-core-edimm2.2", "engicam,px30-core", - "rockchip,px30"; - - chosen { - stdout-path = "serial2:115200n8"; - }; -}; - -&pinctrl { - bt { - bt_enable_h: bt-enable-h { - rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - sdio-pwrseq { - wifi_enable_h: wifi-enable-h { - rockchip,pins = <1 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; -}; - -&sdio_pwrseq { - reset-gpios = <&gpio1 RK_PC3 GPIO_ACTIVE_LOW>; -}; - -&vcc3v3_btreg { - enable-gpio = <&gpio1 RK_PC2 GPIO_ACTIVE_HIGH>; -}; diff --git a/arch/arm/dts/px30-engicam-px30-core.dtsi b/arch/arm/dts/px30-engicam-px30-core.dtsi deleted file mode 100644 index 7249871530..0000000000 --- a/arch/arm/dts/px30-engicam-px30-core.dtsi +++ /dev/null @@ -1,241 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2020 Fuzhou Rockchip Electronics Co., Ltd - * Copyright (c) 2020 Engicam srl - * Copyright (c) 2020 Amarula Solutons - * Copyright (c) 2020 Amarula Solutons(India) - */ - -#include -#include - -/ { - compatible = "engicam,px30-core", "rockchip,px30"; - - aliases { - mmc0 = &emmc; - }; -}; - -&cpu0 { - cpu-supply = <&vdd_arm>; -}; - -&cpu1 { - cpu-supply = <&vdd_arm>; -}; - -&cpu2 { - cpu-supply = <&vdd_arm>; -}; - -&cpu3 { - cpu-supply = <&vdd_arm>; -}; - -&emmc { - cap-mmc-highspeed; - mmc-hs200-1_8v; - non-removable; - status = "okay"; -}; - -&i2c0 { - status = "okay"; - - rk809: pmic@20 { - compatible = "rockchip,rk809"; - reg = <0x20>; - interrupt-parent = <&gpio0>; - interrupts = ; - pinctrl-names = "default"; - pinctrl-0 = <&pmic_int>; - rockchip,system-power-controller; - wakeup-source; - #clock-cells = <1>; - clock-output-names = "rk808-clkout1", "rk808-clkout2"; - - vcc1-supply = <&vcc5v0_sys>; - vcc2-supply = <&vcc5v0_sys>; - vcc3-supply = <&vcc5v0_sys>; - vcc4-supply = <&vcc5v0_sys>; - vcc5-supply = <&vcc3v3_sys>; - vcc6-supply = <&vcc3v3_sys>; - vcc7-supply = <&vcc3v3_sys>; - vcc8-supply = <&vcc3v3_sys>; - vcc9-supply = <&vcc5v0_sys>; - - regulators { - vdd_log: DCDC_REG1 { - regulator-name = "vdd_log"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <950000>; - regulator-max-microvolt = <1350000>; - regulator-ramp-delay = <6001>; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <950000>; - }; - }; - - vdd_arm: DCDC_REG2 { - regulator-name = "vdd_arm"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <950000>; - regulator-max-microvolt = <1350000>; - regulator-ramp-delay = <6001>; - - regulator-state-mem { - regulator-off-in-suspend; - regulator-suspend-microvolt = <950000>; - }; - }; - - vcc_ddr: DCDC_REG3 { - regulator-name = "vcc_ddr"; - regulator-always-on; - regulator-boot-on; - - regulator-state-mem { - regulator-on-in-suspend; - }; - }; - - vcc_3v3: DCDC_REG4 { - regulator-name = "vcc_3v3"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <3300000>; - }; - }; - - vcc3v3_sys: DCDC_REG5 { - regulator-name = "vcc3v3_sys"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <3300000>; - }; - }; - - vcc_1v0: LDO_REG1 { - regulator-name = "vcc_1v0"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1000000>; - }; - }; - - vcc_1v8: LDO_REG2 { - regulator-name = "vcc_1v8"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1800000>; - }; - }; - - vdd_1v0: LDO_REG3 { - regulator-name = "vdd_1v0"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1000000>; - }; - }; - - vcc3v0_pmu: LDO_REG4 { - regulator-name = "vcc3v0_pmu"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <3300000>; - - }; - }; - - vccio_sd: LDO_REG5 { - regulator-name = "vccio_sd"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <3300000>; - }; - }; - - vcc3v3_lcd: SWITCH_REG1 { - regulator-boot-on; - regulator-name = "vcc3v3_lcd"; - }; - - vcc5v0_host: SWITCH_REG2 { - regulator-name = "vcc5v0_host"; - regulator-always-on; - regulator-boot-on; - }; - }; - }; -}; - -&io_domains { - vccio1-supply = <&vcc_3v3>; - vccio2-supply = <&vcc_3v3>; - vccio3-supply = <&vcc_3v3>; - vccio4-supply = <&vcc_3v3>; - vccio5-supply = <&vcc_3v3>; - vccio6-supply = <&vcc_1v8>; - status = "okay"; -}; - -&pinctrl { - pmic { - pmic_int: pmic_int { - rockchip,pins = <0 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>; - }; - }; -}; - -&pmu_io_domains { - pmuio1-supply = <&vcc_3v3>; - pmuio2-supply = <&vcc_3v3>; - status = "okay"; -}; - -&tsadc { - rockchip,hw-tshut-mode = <1>; - rockchip,hw-tshut-polarity = <1>; - status = "okay"; -}; diff --git a/arch/arm/dts/px30-evb.dts b/arch/arm/dts/px30-evb.dts deleted file mode 100644 index 848bc39cf8..0000000000 --- a/arch/arm/dts/px30-evb.dts +++ /dev/null @@ -1,634 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2018 Fuzhou Rockchip Electronics Co., Ltd - */ - -/dts-v1/; -#include -#include -#include -#include "px30.dtsi" - -/ { - model = "Rockchip PX30 EVB"; - compatible = "rockchip,px30-evb", "rockchip,px30"; - - aliases { - mmc0 = &sdmmc; - mmc1 = &sdio; - mmc2 = &emmc; - }; - - chosen { - stdout-path = "serial5:115200n8"; - }; - - adc-keys { - compatible = "adc-keys"; - io-channels = <&saradc 2>; - io-channel-names = "buttons"; - keyup-threshold-microvolt = <1800000>; - poll-interval = <100>; - - esc-key { - label = "esc"; - linux,code = ; - press-threshold-microvolt = <1310000>; - }; - - home-key { - label = "home"; - linux,code = ; - press-threshold-microvolt = <624000>; - }; - - menu-key { - label = "menu"; - linux,code = ; - press-threshold-microvolt = <987000>; - }; - - vol-down-key { - label = "volume down"; - linux,code = ; - press-threshold-microvolt = <300000>; - }; - - vol-up-key { - label = "volume up"; - linux,code = ; - press-threshold-microvolt = <17000>; - }; - }; - - backlight: backlight { - compatible = "pwm-backlight"; - pwms = <&pwm1 0 25000 0>; - power-supply = <&vcc3v3_lcd>; - }; - - emmc_pwrseq: emmc-pwrseq { - compatible = "mmc-pwrseq-emmc"; - pinctrl-0 = <&emmc_reset>; - pinctrl-names = "default"; - reset-gpios = <&gpio1 RK_PB3 GPIO_ACTIVE_HIGH>; - }; - - sdio_pwrseq: sdio-pwrseq { - compatible = "mmc-pwrseq-simple"; - pinctrl-names = "default"; - pinctrl-0 = <&wifi_enable_h>; - - /* - * On the module itself this is one of these (depending - * on the actual card populated): - * - SDIO_RESET_L_WL_REG_ON - * - PDN (power down when low) - */ - reset-gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_LOW>; /* GPIO3_A4 */ - }; - - vcc5v0_sys: vccsys { - compatible = "regulator-fixed"; - regulator-name = "vcc5v0_sys"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - }; -}; - -&cpu0 { - cpu-supply = <&vdd_arm>; -}; - -&cpu1 { - cpu-supply = <&vdd_arm>; -}; - -&cpu2 { - cpu-supply = <&vdd_arm>; -}; - -&cpu3 { - cpu-supply = <&vdd_arm>; -}; - -&csi_dphy { - status = "okay"; -}; - -&display_subsystem { - status = "okay"; -}; - -&dsi { - status = "okay"; - - ports { - mipi_out: port@1 { - reg = <1>; - - mipi_out_panel: endpoint { - remote-endpoint = <&mipi_in_panel>; - }; - }; - }; - - panel@0 { - compatible = "xinpeng,xpp055c272"; - reg = <0>; - backlight = <&backlight>; - iovcc-supply = <&vcc_1v8>; - vci-supply = <&vcc3v3_lcd>; - - port { - mipi_in_panel: endpoint { - remote-endpoint = <&mipi_out_panel>; - }; - }; - }; -}; - -&dsi_dphy { - status = "okay"; -}; - -&emmc { - cap-mmc-highspeed; - mmc-hs200-1_8v; - non-removable; - mmc-pwrseq = <&emmc_pwrseq>; - vmmc-supply = <&vcc_3v0>; - vqmmc-supply = <&vccio_flash>; - status = "okay"; -}; - -&gmac { - clock_in_out = "output"; - phy-supply = <&vcc_rmii>; - snps,reset-gpio = <&gpio2 13 GPIO_ACTIVE_LOW>; - snps,reset-active-low; - snps,reset-delays-us = <0 50000 50000>; - status = "okay"; -}; - -&gpu { - mali-supply = <&vdd_log>; - status = "okay"; -}; - -&i2c0 { - status = "okay"; - - rk809: pmic@20 { - compatible = "rockchip,rk809"; - reg = <0x20>; - interrupt-parent = <&gpio0>; - interrupts = <7 IRQ_TYPE_LEVEL_LOW>; - pinctrl-names = "default"; - pinctrl-0 = <&pmic_int>; - rockchip,system-power-controller; - wakeup-source; - #clock-cells = <0>; - clock-output-names = "xin32k"; - - vcc1-supply = <&vcc5v0_sys>; - vcc2-supply = <&vcc5v0_sys>; - vcc3-supply = <&vcc5v0_sys>; - vcc4-supply = <&vcc5v0_sys>; - vcc5-supply = <&vcc3v3_sys>; - vcc6-supply = <&vcc3v3_sys>; - vcc7-supply = <&vcc3v3_sys>; - vcc8-supply = <&vcc3v3_sys>; - vcc9-supply = <&vcc5v0_sys>; - - regulators { - vdd_log: DCDC_REG1 { - regulator-name = "vdd_log"; - regulator-min-microvolt = <950000>; - regulator-max-microvolt = <1350000>; - regulator-ramp-delay = <6001>; - regulator-always-on; - regulator-boot-on; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <950000>; - }; - }; - - vdd_arm: DCDC_REG2 { - regulator-name = "vdd_arm"; - regulator-min-microvolt = <950000>; - regulator-max-microvolt = <1350000>; - regulator-ramp-delay = <6001>; - regulator-always-on; - regulator-boot-on; - - regulator-state-mem { - regulator-off-in-suspend; - regulator-suspend-microvolt = <950000>; - }; - }; - - vcc_ddr: DCDC_REG3 { - regulator-name = "vcc_ddr"; - regulator-always-on; - regulator-boot-on; - - regulator-state-mem { - regulator-on-in-suspend; - }; - }; - - vcc_3v0: vcc_rmii: DCDC_REG4 { - regulator-name = "vcc_3v0"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-always-on; - regulator-boot-on; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <3000000>; - }; - }; - - vcc3v3_sys: DCDC_REG5 { - regulator-name = "vcc3v3_sys"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - regulator-boot-on; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <3300000>; - }; - }; - - vcc_1v0: LDO_REG1 { - regulator-name = "vcc_1v0"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - regulator-boot-on; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1000000>; - }; - }; - - vcc_1v8: vccio_flash: vccio_sdio: LDO_REG2 { - regulator-name = "vcc_1v8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1800000>; - }; - }; - - vdd_1v0: LDO_REG3 { - regulator-name = "vdd_1v0"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - regulator-boot-on; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1000000>; - }; - }; - - vcc3v0_pmu: LDO_REG4 { - regulator-name = "vcc3v0_pmu"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-always-on; - regulator-boot-on; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <3000000>; - }; - }; - - vccio_sd: LDO_REG5 { - regulator-name = "vccio_sd"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - regulator-boot-on; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <3300000>; - }; - }; - - vcc_sd: LDO_REG6 { - regulator-name = "vcc_sd"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <3300000>; - }; - }; - - vcc2v8_dvp: LDO_REG7 { - regulator-name = "vcc2v8_dvp"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - regulator-boot-on; - - regulator-state-mem { - regulator-off-in-suspend; - regulator-suspend-microvolt = <2800000>; - }; - }; - - vcc1v8_dvp: LDO_REG8 { - regulator-name = "vcc1v8_dvp"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-boot-on; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1800000>; - }; - }; - - vcc1v5_dvp: LDO_REG9 { - regulator-name = "vcc1v5_dvp"; - regulator-min-microvolt = <1500000>; - regulator-max-microvolt = <1500000>; - regulator-boot-on; - - regulator-state-mem { - regulator-off-in-suspend; - regulator-suspend-microvolt = <1500000>; - }; - }; - - vcc3v3_lcd: SWITCH_REG1 { - regulator-name = "vcc3v3_lcd"; - regulator-boot-on; - }; - - vcc5v0_host: SWITCH_REG2 { - regulator-name = "vcc5v0_host"; - regulator-always-on; - regulator-boot-on; - }; - }; - }; -}; - -&i2c1 { - status = "okay"; - - sensor@d { - compatible = "asahi-kasei,ak8963"; - reg = <0x0d>; - gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>; - vdd-supply = <&vcc3v0_pmu>; - mount-matrix = "1", /* x0 */ - "0", /* y0 */ - "0", /* z0 */ - "0", /* x1 */ - "1", /* y1 */ - "0", /* z1 */ - "0", /* x2 */ - "0", /* y2 */ - "1"; /* z2 */ - }; - - touchscreen@14 { - compatible = "goodix,gt1151"; - reg = <0x14>; - interrupt-parent = <&gpio0>; - interrupts = ; - irq-gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; - reset-gpios = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>; - VDDIO-supply = <&vcc3v3_lcd>; - }; - - sensor@4c { - compatible = "fsl,mma7660"; - reg = <0x4c>; - interrupt-parent = <&gpio0>; - interrupts = ; - }; -}; - -&i2c2 { - status = "okay"; - - clock-frequency = <100000>; - - /* These are relatively safe rise/fall times; TODO: measure */ - i2c-scl-falling-time-ns = <50>; - i2c-scl-rising-time-ns = <300>; - - ov5695: ov5695@36 { - compatible = "ovti,ov5695"; - reg = <0x36>; - avdd-supply = <&vcc2v8_dvp>; - clocks = <&cru SCLK_CIF_OUT>; - clock-names = "xvclk"; - dvdd-supply = <&vcc1v5_dvp>; - dovdd-supply = <&vcc1v8_dvp>; - pinctrl-names = "default"; - pinctrl-0 = <&cif_clkout_m0>; - reset-gpios = <&gpio2 14 GPIO_ACTIVE_LOW>; - - port { - ucam_out: endpoint { - remote-endpoint = <&mipi_in_ucam>; - data-lanes = <1 2>; - }; - }; - }; -}; - -&i2s1_2ch { - status = "okay"; -}; - -&io_domains { - status = "okay"; - - vccio1-supply = <&vccio_sdio>; - vccio2-supply = <&vccio_sd>; - vccio3-supply = <&vcc_3v0>; - vccio4-supply = <&vcc3v0_pmu>; - vccio5-supply = <&vcc_3v0>; - vccio6-supply = <&vccio_flash>; -}; - -&isp { - status = "okay"; - - ports { - port@0 { - mipi_in_ucam: endpoint@0 { - reg = <0>; - data-lanes = <1 2>; - remote-endpoint = <&ucam_out>; - }; - }; - }; -}; - -&isp_mmu { - status = "okay"; -}; - -&pinctrl { - headphone { - hp_det: hp-det { - rockchip,pins = - <2 RK_PB0 RK_FUNC_GPIO &pcfg_pull_down>; - }; - }; - - emmc { - emmc_reset: emmc-reset { - rockchip,pins = <1 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - pmic { - pmic_int: pmic_int { - rockchip,pins = - <0 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>; - }; - - soc_slppin_gpio: soc_slppin_gpio { - rockchip,pins = - <0 RK_PA4 RK_FUNC_GPIO &pcfg_output_low>; - }; - - soc_slppin_slp: soc_slppin_slp { - rockchip,pins = - <0 RK_PA4 1 &pcfg_pull_none>; - }; - - soc_slppin_rst: soc_slppin_rst { - rockchip,pins = - <0 RK_PA4 2 &pcfg_pull_none>; - }; - }; - - sdio-pwrseq { - wifi_enable_h: wifi-enable-h { - rockchip,pins = - <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; -}; - -&pmu_io_domains { - status = "okay"; - - pmuio1-supply = <&vcc3v0_pmu>; - pmuio2-supply = <&vcc3v0_pmu>; -}; - -&pwm1 { - status = "okay"; -}; - -&saradc { - vref-supply = <&vcc_1v8>; - status = "okay"; -}; - -&sdmmc { - cap-mmc-highspeed; - cap-sd-highspeed; - card-detect-delay = <800>; - sd-uhs-sdr12; - sd-uhs-sdr25; - sd-uhs-sdr50; - sd-uhs-sdr104; - vmmc-supply = <&vcc_sd>; - vqmmc-supply = <&vccio_sd>; - status = "okay"; -}; - -&sdio { - cap-sd-highspeed; - keep-power-in-suspend; - non-removable; - mmc-pwrseq = <&sdio_pwrseq>; - sd-uhs-sdr104; - status = "okay"; -}; - -&tsadc { - rockchip,hw-tshut-mode = <1>; - rockchip,hw-tshut-polarity = <1>; - status = "okay"; -}; - -&u2phy { - status = "okay"; - - u2phy_host: host-port { - status = "okay"; - }; - - u2phy_otg: otg-port { - status = "okay"; - }; -}; - -&uart1 { - pinctrl-names = "default"; - pinctrl-0 = <&uart1_xfer &uart1_cts>; - status = "okay"; -}; - -&uart5 { - status = "okay"; -}; - -&usb20_otg { - status = "okay"; -}; - -&usb_host0_ehci { - status = "okay"; -}; - -&usb_host0_ohci { - status = "okay"; -}; - -&vopb { - status = "okay"; -}; - -&vopb_mmu { - status = "okay"; -}; - -&vopl { - status = "okay"; -}; - -&vopl_mmu { - status = "okay"; -}; diff --git a/arch/arm/dts/px30-ringneck-haikou.dts b/arch/arm/dts/px30-ringneck-haikou.dts deleted file mode 100644 index 08a3ad3e7a..0000000000 --- a/arch/arm/dts/px30-ringneck-haikou.dts +++ /dev/null @@ -1,232 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2022 Theobroma Systems Design und Consulting GmbH - */ - -/dts-v1/; -#include "px30-ringneck.dtsi" -#include -#include - -/ { - model = "Theobroma Systems PX30-uQ7 SoM on Haikou devkit"; - compatible = "tsd,px30-ringneck-haikou", "rockchip,px30"; - - aliases { - mmc2 = &sdmmc; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - gpio-keys { - compatible = "gpio-keys"; - pinctrl-0 = <&haikou_keys_pin>; - pinctrl-names = "default"; - - button-batlow-n { - label = "BATLOW#"; - linux,code = ; - gpios = <&gpio3 RK_PA7 GPIO_ACTIVE_LOW>; - }; - - button-slp-btn-n { - label = "SLP_BTN#"; - linux,code = ; - gpios = <&gpio1 RK_PB7 GPIO_ACTIVE_LOW>; - }; - - button-wake-n { - label = "WAKE#"; - linux,code = ; - gpios = <&gpio1 RK_PB6 GPIO_ACTIVE_LOW>; - wakeup-source; - }; - - switch-lid-btn-n { - label = "LID_BTN#"; - linux,code = ; - linux,input-type = ; - gpios = <&gpio3 RK_PA6 GPIO_ACTIVE_LOW>; - }; - }; - - leds { - pinctrl-0 = <&module_led_pin>, <&sd_card_led_pin>; - - sd_card_led: led-1 { - gpios = <&gpio3 RK_PB3 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "mmc2"; - function = LED_FUNCTION_SD; - color = ; - }; - }; - - i2s0-sound { - compatible = "simple-audio-card"; - simple-audio-card,format = "i2s"; - simple-audio-card,name = "Haikou,I2S-codec"; - simple-audio-card,mclk-fs = <512>; - - simple-audio-card,codec { - clocks = <&sgtl5000_clk>; - sound-dai = <&sgtl5000>; - }; - - simple-audio-card,cpu { - bitclock-master; - frame-master; - sound-dai = <&i2s0_8ch>; - }; - }; - - sgtl5000_clk: sgtl5000-oscillator { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <24576000>; - }; - - dc_12v: dc-12v-regulator { - compatible = "regulator-fixed"; - regulator-name = "dc_12v"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <12000000>; - regulator-max-microvolt = <12000000>; - }; - - vcc3v3_baseboard: vcc3v3-baseboard-regulator { - compatible = "regulator-fixed"; - regulator-name = "vcc3v3_baseboard"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&dc_12v>; - }; - - vcc5v0_baseboard: vcc5v0-baseboard-regulator { - compatible = "regulator-fixed"; - regulator-name = "vcc5v0_baseboard"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <&dc_12v>; - }; - - vdda_codec: vdda-codec-regulator { - compatible = "regulator-fixed"; - regulator-name = "vdda_codec"; - regulator-boot-on; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - vin-supply = <&vcc5v0_baseboard>; - }; - - vddd_codec: vddd-codec-regulator { - compatible = "regulator-fixed"; - regulator-name = "vddd_codec"; - regulator-boot-on; - regulator-min-microvolt = <1600000>; - regulator-max-microvolt = <1600000>; - vin-supply = <&vcc5v0_baseboard>; - }; -}; - -&i2c2 { - status = "okay"; - clock-frequency = <400000>; - - sgtl5000: codec@a { - compatible = "fsl,sgtl5000"; - reg = <0x0a>; - clocks = <&sgtl5000_clk>; - #sound-dai-cells = <0>; - VDDA-supply = <&vdda_codec>; - VDDIO-supply = <&vcc3v3_baseboard>; - VDDD-supply = <&vddd_codec>; - }; -}; - -&i2c3 { - eeprom@50 { - reg = <0x50>; - compatible = "atmel,24c01"; - pagesize = <8>; - size = <128>; - vcc-supply = <&vcc3v3_baseboard>; - }; -}; - -&i2s0_8ch { - status = "okay"; -}; - -&gmac { - status = "okay"; -}; - -&pinctrl { - haikou { - haikou_keys_pin: haikou-keys-pin { - rockchip,pins = - /* WAKE# */ - <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_up>, - /* SLP_BTN# */ - <1 RK_PB7 RK_FUNC_GPIO &pcfg_pull_up>, - /* LID_BTN */ - <3 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>, - /* BATLOW# */ - <3 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>, - /* BIOS_DISABLE# */ - <2 RK_PC2 RK_FUNC_GPIO &pcfg_pull_up>; - }; - }; - - leds { - sd_card_led_pin: sd-card-led-pin { - rockchip,pins = - <3 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; -}; - -&pwm0 { - status = "okay"; -}; - -&sdmmc { - sd-uhs-sdr12; - sd-uhs-sdr25; - sd-uhs-sdr50; - bus-width = <4>; - cap-mmc-highspeed; - cap-sd-highspeed; - cd-gpios = <&gpio0 RK_PA3 GPIO_ACTIVE_LOW>; - disable-wp; - vmmc-supply = <&vcc3v3_baseboard>; - status = "okay"; -}; - -&spi1 { - status = "okay"; -}; - -&u2phy_otg { - status = "okay"; -}; - -&uart0 { - status = "okay"; -}; - -&uart5 { - pinctrl-0 = <&uart5_xfer>; - status = "okay"; -}; - -&usb20_otg { - status = "okay"; -}; diff --git a/arch/arm/dts/px30-ringneck.dtsi b/arch/arm/dts/px30-ringneck.dtsi deleted file mode 100644 index 1239775583..0000000000 --- a/arch/arm/dts/px30-ringneck.dtsi +++ /dev/null @@ -1,382 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2022 Theobroma Systems Design und Consulting GmbH - */ - -/dts-v1/; -#include "px30.dtsi" -#include - -/ { - aliases { - mmc0 = &emmc; - mmc1 = &sdio; - rtc0 = &rtc_twi; - rtc1 = &rk809; - }; - - emmc_pwrseq: emmc-pwrseq { - compatible = "mmc-pwrseq-emmc"; - pinctrl-0 = <&emmc_reset>; - pinctrl-names = "default"; - reset-gpios = <&gpio1 RK_PB3 GPIO_ACTIVE_HIGH>; - }; - - leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&module_led_pin>; - status = "okay"; - - module_led: led-0 { - gpios = <&gpio1 RK_PB0 GPIO_ACTIVE_HIGH>; - function = LED_FUNCTION_HEARTBEAT; - linux,default-trigger = "heartbeat"; - color = ; - }; - }; - - vcc5v0_sys: vccsys-regulator { - compatible = "regulator-fixed"; - regulator-name = "vcc5v0_sys"; - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - }; -}; - -&cpu0 { - cpu-supply = <&vdd_arm>; -}; - -&cpu1 { - cpu-supply = <&vdd_arm>; -}; - -&cpu2 { - cpu-supply = <&vdd_arm>; -}; - -&cpu3 { - cpu-supply = <&vdd_arm>; -}; - -&emmc { - bus-width = <8>; - cap-mmc-highspeed; - mmc-hs200-1_8v; - supports-emmc; - mmc-pwrseq = <&emmc_pwrseq>; - non-removable; - vmmc-supply = <&vcc_3v3>; - vqmmc-supply = <&vcc_emmc>; - - status = "okay"; -}; - -/* On-module TI DP83825I PHY but no connector, enable in carrierboard */ -&gmac { - snps,reset-gpio = <&gpio3 RK_PB0 GPIO_ACTIVE_LOW>; - snps,reset-active-low; - snps,reset-delays-us = <0 50000 50000>; - phy-supply = <&vcc_3v3>; - clock_in_out = "output"; -}; - -&gpio2 { - /* - * The Qseven BIOS_DISABLE signal on the PX30-µQ7 keeps the on-module - * eMMC powered-down initially (in fact it keeps the reset signal - * asserted). BIOS_DISABLE_OVERRIDE pin allows to re-enable eMMC after - * the SPL has been booted from SD Card. - */ - bios-disable-override-hog { - gpios = ; - output-high; - line-name = "bios_disable_override"; - gpio-hog; - }; - - /* - * The BIOS_DISABLE hog is a feedback pin for the actual status of the - * signal, ignoring the BIOS_DISABLE_OVERRIDE logic. This usually - * represents the state of a switch on the baseboard. - */ - bios-disable-n-hog { - gpios = ; - line-name = "bios_disable"; - input; - gpio-hog; - }; -}; - -&gpu { - status = "okay"; -}; - -&i2c0 { - status = "okay"; - - rk809: pmic@20 { - compatible = "rockchip,rk809"; - reg = <0x20>; - interrupt-parent = <&gpio0>; - interrupts = <7 IRQ_TYPE_LEVEL_LOW>; - pinctrl-0 = <&pmic_int>; - pinctrl-names = "default"; - #clock-cells = <0>; - clock-output-names = "xin32k"; - rockchip,system-power-controller; - wakeup-source; - - vcc1-supply = <&vcc5v0_sys>; - vcc2-supply = <&vcc5v0_sys>; - vcc3-supply = <&vcc5v0_sys>; - vcc4-supply = <&vcc5v0_sys>; - vcc5-supply = <&vcc_3v3>; - vcc6-supply = <&vcc_3v3>; - vcc7-supply = <&vcc_3v3>; - vcc9-supply = <&vcc5v0_sys>; - - regulators { - vdd_log: DCDC_REG1 { - regulator-name = "vdd_log"; - regulator-min-microvolt = <950000>; - regulator-max-microvolt = <1350000>; - regulator-ramp-delay = <6001>; - regulator-always-on; - regulator-boot-on; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <950000>; - }; - }; - - vdd_arm: DCDC_REG2 { - regulator-name = "vdd_arm"; - regulator-min-microvolt = <950000>; - regulator-max-microvolt = <1350000>; - regulator-ramp-delay = <6001>; - regulator-always-on; - regulator-boot-on; - - regulator-state-mem { - regulator-off-in-suspend; - regulator-suspend-microvolt = <950000>; - }; - }; - - vcc_ddr: DCDC_REG3 { - regulator-name = "vcc_ddr"; - regulator-always-on; - regulator-boot-on; - - regulator-state-mem { - regulator-on-in-suspend; - }; - }; - - vcc_3v0_1v8: vcc_emmc: DCDC_REG4 { - regulator-name = "vcc_3v0_1v8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3000000>; - regulator-always-on; - regulator-boot-on; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <3000000>; - }; - }; - - vcc_3v3: DCDC_REG5 { - regulator-name = "vcc_3v3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - regulator-boot-on; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <3300000>; - }; - }; - - vcc_1v8: LDO_REG2 { - regulator-name = "vcc_1v8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1800000>; - }; - }; - - vcc_1v0: LDO_REG3 { - regulator-name = "vcc_1v0"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - regulator-boot-on; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1000000>; - }; - }; - - vccio_sd: LDO_REG5 { - regulator-name = "vccio_sd"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - regulator-boot-on; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <3300000>; - }; - }; - - vcc_lcd: LDO_REG7 { - regulator-always-on; - regulator-boot-on; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-name = "vcc_lcd"; - - regulator-state-mem { - regulator-off-in-suspend; - regulator-suspend-microvolt = <1000000>; - }; - }; - - vcc_1v8_lcd: LDO_REG8 { - regulator-name = "vcc_1v8_lcd"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1800000>; - }; - }; - - vcca_1v8: LDO_REG9 { - regulator-name = "vcca_1v8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - - regulator-state-mem { - regulator-off-in-suspend; - regulator-suspend-microvolt = <1800000>; - }; - }; - }; - }; -}; - -&i2c1 { - status = "okay"; - - /* SE05x is limited to Fast Mode */ - clock-frequency = <400000>; - - fan: fan@18 { - compatible = "ti,amc6821"; - reg = <0x18>; - #cooling-cells = <2>; - }; - - rtc_twi: rtc@6f { - compatible = "isil,isl1208"; - reg = <0x6f>; - }; -}; - -&i2c3 { - status = "okay"; -}; - -&i2s0_8ch { - rockchip,trcm-sync-tx-only; - - pinctrl-0 = <&i2s0_8ch_sclktx &i2s0_8ch_lrcktx - &i2s0_8ch_sdo0 &i2s0_8ch_sdi0>; -}; - -&io_domains { - vccio1-supply = <&vcc_3v3>; - vccio2-supply = <&vccio_sd>; - vccio3-supply = <&vcc_3v3>; - vccio4-supply = <&vcc_3v3>; - vccio5-supply = <&vcc_3v3>; - vccio6-supply = <&vcc_emmc>; - vccio-oscgpi-supply = <&vcc_3v3>; - - status = "okay"; -}; - -&pinctrl { - emmc { - emmc_reset: emmc-reset { - rockchip,pins = <1 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - leds { - module_led_pin: module-led-pin { - rockchip,pins = <1 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - pmic { - pmic_int: pmic-int { - rockchip,pins = - <0 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>; - }; - }; -}; - -&saradc { - vref-supply = <&vcc_1v8>; - status = "okay"; -}; - -&sdmmc { - vqmmc-supply = <&vccio_sd>; -}; - -&tsadc { - status = "okay"; -}; - -&u2phy { - status = "okay"; -}; - -&u2phy_host { - status = "okay"; -}; - -/* Mule UCAN */ -&usb_host0_ehci { - status = "okay"; -}; - -&usb_host0_ohci { - status = "okay"; -}; - -&wdt { - status = "okay"; -}; diff --git a/arch/arm/dts/rk3326-odroid-go2-u-boot.dtsi b/arch/arm/dts/rk3326-odroid-go2-u-boot.dtsi index 04028bf649..a31dea8db3 100644 --- a/arch/arm/dts/rk3326-odroid-go2-u-boot.dtsi +++ b/arch/arm/dts/rk3326-odroid-go2-u-boot.dtsi @@ -74,6 +74,21 @@ bootph-all; }; +&rk817 { + regulators { + vcc_cam: LDO_REG9 { + regulator-name = "vcc_cam"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <3000000>; + }; + }; + }; +}; + &saradc { bootph-all; status = "okay"; diff --git a/arch/arm/dts/rk3326-odroid-go2.dts b/arch/arm/dts/rk3326-odroid-go2.dts deleted file mode 100644 index ea0695b51e..0000000000 --- a/arch/arm/dts/rk3326-odroid-go2.dts +++ /dev/null @@ -1,642 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -/* - * Copyright (c) 2019 Hardkernel Co., Ltd - * Copyright (c) 2020 Theobroma Systems Design und Consulting GmbH - */ - -/dts-v1/; -#include -#include -#include -#include "rk3326.dtsi" - -/ { - model = "ODROID-GO Advance"; - compatible = "hardkernel,rk3326-odroid-go2", "rockchip,rk3326"; - - aliases { - mmc0 = &sdmmc; - }; - - chosen { - stdout-path = "serial2:115200n8"; - }; - - adc-joystick { - compatible = "adc-joystick"; - io-channels = <&saradc 1>, - <&saradc 2>; - #address-cells = <1>; - #size-cells = <0>; - - axis@0 { - reg = <0>; - abs-flat = <10>; - abs-fuzz = <10>; - abs-range = <172 772>; - linux,code = ; - }; - - axis@1 { - reg = <1>; - abs-flat = <10>; - abs-fuzz = <10>; - abs-range = <278 815>; - linux,code = ; - }; - }; - - backlight: backlight { - compatible = "pwm-backlight"; - power-supply = <&vcc_bl>; - pwms = <&pwm1 0 25000 0>; - }; - - gpio-keys { - compatible = "gpio-keys"; - pinctrl-names = "default"; - pinctrl-0 = <&btn_pins>; - - /* - * *** ODROIDGO2-Advance Switch layout *** - * |------------------------------------------------| - * | sw15 sw16 | - * |------------------------------------------------| - * | sw1 |-------------------| sw8 | - * | sw3 sw4 | | sw7 sw5 | - * | sw2 | LCD Display | sw6 | - * | | | | - * | |-------------------| | - * | sw9 sw10 sw11 sw12 sw13 sw14 | - * |------------------------------------------------| - */ - - sw1 { - gpios = <&gpio1 RK_PB4 GPIO_ACTIVE_LOW>; - label = "DPAD-UP"; - linux,code = ; - }; - sw2 { - gpios = <&gpio1 RK_PB5 GPIO_ACTIVE_LOW>; - label = "DPAD-DOWN"; - linux,code = ; - }; - sw3 { - gpios = <&gpio1 RK_PB6 GPIO_ACTIVE_LOW>; - label = "DPAD-LEFT"; - linux,code = ; - }; - sw4 { - gpios = <&gpio1 RK_PB7 GPIO_ACTIVE_LOW>; - label = "DPAD-RIGHT"; - linux,code = ; - }; - sw5 { - gpios = <&gpio1 RK_PA2 GPIO_ACTIVE_LOW>; - label = "BTN-A"; - linux,code = ; - }; - sw6 { - gpios = <&gpio1 RK_PA5 GPIO_ACTIVE_LOW>; - label = "BTN-B"; - linux,code = ; - }; - sw7 { - gpios = <&gpio1 RK_PA6 GPIO_ACTIVE_LOW>; - label = "BTN-Y"; - linux,code = ; - }; - sw8 { - gpios = <&gpio1 RK_PA7 GPIO_ACTIVE_LOW>; - label = "BTN-X"; - linux,code = ; - }; - sw9 { - gpios = <&gpio2 RK_PA0 GPIO_ACTIVE_LOW>; - label = "F1"; - linux,code = ; - }; - sw10 { - gpios = <&gpio2 RK_PA1 GPIO_ACTIVE_LOW>; - label = "F2"; - linux,code = ; - }; - sw11 { - gpios = <&gpio2 RK_PA2 GPIO_ACTIVE_LOW>; - label = "F3"; - linux,code = ; - }; - sw12 { - gpios = <&gpio2 RK_PA3 GPIO_ACTIVE_LOW>; - label = "F4"; - linux,code = ; - }; - sw13 { - gpios = <&gpio2 RK_PA4 GPIO_ACTIVE_LOW>; - label = "F5"; - linux,code = ; - }; - sw14 { - gpios = <&gpio2 RK_PA5 GPIO_ACTIVE_LOW>; - label = "F6"; - linux,code = ; - }; - sw15 { - gpios = <&gpio2 RK_PA6 GPIO_ACTIVE_LOW>; - label = "TOP-LEFT"; - linux,code = ; - }; - sw16 { - gpios = <&gpio2 RK_PA7 GPIO_ACTIVE_LOW>; - label = "TOP-RIGHT"; - linux,code = ; - }; - }; - - leds: gpio-leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&blue_led_pin>; - - blue_led: led-0 { - label = "blue:heartbeat"; - gpios = <&gpio0 RK_PC1 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "heartbeat"; - }; - }; - - rk817-sound { - compatible = "simple-audio-card"; - simple-audio-card,name = "Analog"; - simple-audio-card,format = "i2s"; - simple-audio-card,hp-det-gpio = <&gpio2 RK_PC6 GPIO_ACTIVE_HIGH>; - simple-audio-card,mclk-fs = <256>; - simple-audio-card,widgets = - "Microphone", "Mic Jack", - "Headphone", "Headphones", - "Speaker", "Speaker"; - simple-audio-card,routing = - "MICL", "Mic Jack", - "Headphones", "HPOL", - "Headphones", "HPOR", - "Speaker", "SPKO"; - - simple-audio-card,codec { - sound-dai = <&rk817>; - }; - - simple-audio-card,cpu { - sound-dai = <&i2s1_2ch>; - }; - }; - - vccsys: vccsys { - compatible = "regulator-fixed"; - regulator-name = "vcc3v8_sys"; - regulator-always-on; - regulator-min-microvolt = <3800000>; - regulator-max-microvolt = <3800000>; - }; - - vcc_host: vcc_host { - compatible = "regulator-fixed"; - regulator-name = "vcc_host"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - - gpio = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>; - enable-active-high; - regulator-always-on; - regulator-boot-on; - vin-supply = <&usb_midu>; - }; -}; - -&cpu0 { - cpu-supply = <&vdd_arm>; -}; - -&cpu1 { - cpu-supply = <&vdd_arm>; -}; - -&cpu2 { - cpu-supply = <&vdd_arm>; -}; - -&cpu3 { - cpu-supply = <&vdd_arm>; -}; - -&cru { - assigned-clocks = <&cru PLL_NPLL>, - <&cru ACLK_BUS_PRE>, <&cru ACLK_PERI_PRE>, - <&cru HCLK_BUS_PRE>, <&cru HCLK_PERI_PRE>, - <&cru PCLK_BUS_PRE>, <&cru SCLK_GPU>, - <&cru PLL_CPLL>; - - assigned-clock-rates = <1188000000>, - <200000000>, <200000000>, - <150000000>, <150000000>, - <100000000>, <200000000>, - <17000000>; -}; - -&display_subsystem { - status = "okay"; -}; - -&dsi { - status = "okay"; - - ports { - mipi_out: port@1 { - reg = <1>; - - mipi_out_panel: endpoint { - remote-endpoint = <&mipi_in_panel>; - }; - }; - }; - - panel@0 { - compatible = "elida,kd35t133"; - reg = <0>; - backlight = <&backlight>; - iovcc-supply = <&vcc_lcd>; - reset-gpios = <&gpio3 RK_PC0 GPIO_ACTIVE_LOW>; - rotation = <270>; - vdd-supply = <&vcc_lcd>; - - port { - mipi_in_panel: endpoint { - remote-endpoint = <&mipi_out_panel>; - }; - }; - }; -}; - -&dsi_dphy { - status = "okay"; -}; - -&gpu { - mali-supply = <&vdd_logic>; - status = "okay"; -}; - -&i2c0 { - clock-frequency = <400000>; - i2c-scl-falling-time-ns = <16>; - i2c-scl-rising-time-ns = <280>; - status = "okay"; - - rk817: pmic@20 { - compatible = "rockchip,rk817"; - reg = <0x20>; - interrupt-parent = <&gpio0>; - interrupts = ; - clock-output-names = "rk808-clkout1", "xin32k"; - clock-names = "mclk"; - clocks = <&cru SCLK_I2S1_OUT>; - pinctrl-names = "default"; - pinctrl-0 = <&pmic_int>, <&i2s1_2ch_mclk>; - wakeup-source; - #clock-cells = <1>; - #sound-dai-cells = <0>; - - vcc1-supply = <&vccsys>; - vcc2-supply = <&vccsys>; - vcc3-supply = <&vccsys>; - vcc4-supply = <&vccsys>; - vcc5-supply = <&vccsys>; - vcc6-supply = <&vccsys>; - vcc7-supply = <&vccsys>; - vcc8-supply = <&vccsys>; - - regulators { - vdd_logic: DCDC_REG1 { - regulator-name = "vdd_logic"; - regulator-min-microvolt = <950000>; - regulator-max-microvolt = <1150000>; - regulator-ramp-delay = <6001>; - regulator-always-on; - regulator-boot-on; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <950000>; - }; - }; - - vdd_arm: DCDC_REG2 { - regulator-name = "vdd_arm"; - regulator-min-microvolt = <950000>; - regulator-max-microvolt = <1350000>; - regulator-ramp-delay = <6001>; - regulator-always-on; - regulator-boot-on; - - regulator-state-mem { - regulator-off-in-suspend; - regulator-suspend-microvolt = <950000>; - }; - }; - - vcc_ddr: DCDC_REG3 { - regulator-name = "vcc_ddr"; - regulator-always-on; - regulator-boot-on; - - regulator-state-mem { - regulator-on-in-suspend; - }; - }; - - vcc_3v3: DCDC_REG4 { - regulator-name = "vcc_3v3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - regulator-boot-on; - - regulator-state-mem { - regulator-off-in-suspend; - regulator-suspend-microvolt = <3300000>; - }; - }; - - vcc_1v8: LDO_REG2 { - regulator-name = "vcc_1v8"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1800000>; - }; - }; - - vdd_1v0: LDO_REG3 { - regulator-name = "vdd_1v0"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - regulator-boot-on; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <1000000>; - }; - }; - - vcc3v3_pmu: LDO_REG4 { - regulator-name = "vcc3v3_pmu"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - regulator-boot-on; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <3300000>; - }; - }; - - vccio_sd: LDO_REG5 { - regulator-name = "vccio_sd"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - regulator-boot-on; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <3300000>; - }; - }; - - vcc_sd: LDO_REG6 { - regulator-name = "vcc_sd"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - - regulator-state-mem { - regulator-on-in-suspend; - regulator-suspend-microvolt = <3300000>; - }; - }; - - vcc_bl: LDO_REG7 { - regulator-name = "vcc_bl"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - - regulator-state-mem { - regulator-off-in-suspend; - regulator-suspend-microvolt = <3300000>; - }; - }; - - vcc_lcd: LDO_REG8 { - regulator-name = "vcc_lcd"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - - regulator-state-mem { - regulator-off-in-suspend; - regulator-suspend-microvolt = <2800000>; - }; - }; - - vcc_cam: LDO_REG9 { - regulator-name = "vcc_cam"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - - regulator-state-mem { - regulator-off-in-suspend; - regulator-suspend-microvolt = <3000000>; - }; - }; - - usb_midu: BOOST { - regulator-name = "usb_midu"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5400000>; - regulator-always-on; - regulator-boot-on; - }; - }; - - rk817_codec: codec { - rockchip,mic-in-differential; - }; - }; -}; - -/* EXT Header(P2): 7(SCL:GPIO0.C2), 8(SDA:GPIO0.C3) */ -&i2c1 { - clock-frequency = <400000>; - status = "okay"; -}; - -/* I2S 1 Channel Used */ -&i2s1_2ch { - status = "okay"; -}; - -&io_domains { - vccio1-supply = <&vcc_3v3>; - vccio2-supply = <&vccio_sd>; - vccio3-supply = <&vcc_3v3>; - vccio4-supply = <&vcc_3v3>; - vccio5-supply = <&vcc_3v3>; - vccio6-supply = <&vcc_3v3>; - status = "okay"; -}; - -&pmu_io_domains { - pmuio1-supply = <&vcc3v3_pmu>; - pmuio2-supply = <&vcc3v3_pmu>; - status = "okay"; -}; - -&pwm1 { - status = "okay"; -}; - -&saradc { - vref-supply = <&vcc_1v8>; - status = "okay"; -}; - -&sdmmc { - cap-sd-highspeed; - card-detect-delay = <200>; - cd-gpios = <&gpio0 RK_PA3 GPIO_ACTIVE_LOW>; /*[> CD GPIO <]*/ - sd-uhs-sdr12; - sd-uhs-sdr25; - sd-uhs-sdr50; - sd-uhs-sdr104; - vmmc-supply = <&vcc_sd>; - vqmmc-supply = <&vccio_sd>; - status = "okay"; -}; - -&sfc { - pinctrl-0 = <&sfc_clk &sfc_cs0 &sfc_bus2>; - pinctrl-names = "default"; - #address-cells = <1>; - #size-cells = <0>; - status = "okay"; - - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <108000000>; - spi-rx-bus-width = <2>; - spi-tx-bus-width = <1>; - }; -}; - -&tsadc { - status = "okay"; -}; - -&u2phy { - status = "okay"; - - u2phy_host: host-port { - status = "okay"; - }; - - u2phy_otg: otg-port { - status = "disabled"; - }; -}; - -&usb20_otg { - status = "okay"; -}; - -/* EXT Header(P2): 2(RXD:GPIO1.C0),3(TXD:.C1),4(CTS:.C2),5(RTS:.C3) */ -&uart1 { - pinctrl-names = "default"; - pinctrl-0 = <&uart1_xfer &uart1_cts>; - status = "okay"; -}; - -&uart2 { - pinctrl-names = "default"; - pinctrl-0 = <&uart2m1_xfer>; - status = "okay"; -}; - -&vopb { - status = "okay"; -}; - -&vopb_mmu { - status = "okay"; -}; - -&pinctrl { - btns { - btn_pins: btn-pins { - rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>, - <1 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>, - <1 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>, - <1 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>, - <1 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>, - <1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>, - <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_up>, - <1 RK_PB7 RK_FUNC_GPIO &pcfg_pull_up>, - <2 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>, - <2 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>, - <2 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>, - <2 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>, - <2 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>, - <2 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>, - <2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>, - <2 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>; - }; - }; - - headphone { - hp_det: hp-det { - rockchip,pins = <2 RK_PC6 RK_FUNC_GPIO &pcfg_pull_down>; - }; - }; - - leds { - blue_led_pin: blue-led-pin { - rockchip,pins = <0 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>; - }; - }; - - pmic { - dc_det: dc-det { - rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>; - }; - - pmic_int: pmic-int { - rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>; - }; - - soc_slppin_gpio: soc_slppin_gpio { - rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_output_low>; - }; - - soc_slppin_rst: soc_slppin_rst { - rockchip,pins = <0 RK_PA4 2 &pcfg_pull_none>; - }; - - soc_slppin_slp: soc_slppin_slp { - rockchip,pins = <0 RK_PA4 1 &pcfg_pull_none>; - }; - }; -}; diff --git a/arch/arm/mach-rockchip/Kconfig b/arch/arm/mach-rockchip/Kconfig index 661e7fd1c9..14b3ab1a57 100644 --- a/arch/arm/mach-rockchip/Kconfig +++ b/arch/arm/mach-rockchip/Kconfig @@ -3,6 +3,7 @@ if ARCH_ROCKCHIP config ROCKCHIP_PX30 bool "Support Rockchip PX30" select ARM64 + imply OF_UPSTREAM select SUPPORT_SPL select SUPPORT_TPL select SPL diff --git a/configs/evb-px30_defconfig b/configs/evb-px30_defconfig index abe545625a..488a259e26 100644 --- a/configs/evb-px30_defconfig +++ b/configs/evb-px30_defconfig @@ -3,7 +3,7 @@ CONFIG_SKIP_LOWLEVEL_INIT=y CONFIG_COUNTER_FREQUENCY=24000000 CONFIG_ARCH_ROCKCHIP=y CONFIG_NR_DRAM_BANKS=1 -CONFIG_DEFAULT_DEVICE_TREE="px30-evb" +CONFIG_DEFAULT_DEVICE_TREE="rockchip/px30-evb" CONFIG_DM_RESET=y CONFIG_ROCKCHIP_PX30=y # CONFIG_TPL_ROCKCHIP_COMMON_BOARD is not set diff --git a/configs/firefly-px30_defconfig b/configs/firefly-px30_defconfig index 063e4211fb..3fe1dc3ab1 100644 --- a/configs/firefly-px30_defconfig +++ b/configs/firefly-px30_defconfig @@ -52,6 +52,7 @@ CONFIG_CMD_USB_MASS_STORAGE=y CONFIG_EFI_PARTITION_ENTRIES_NUMBERS=64 CONFIG_SPL_OF_CONTROL=y CONFIG_OF_LIVE=y +# CONFIG_OF_UPSTREAM is not set CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents" CONFIG_ENV_IS_IN_MMC=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y diff --git a/configs/odroid-go2_defconfig b/configs/odroid-go2_defconfig index f4c9b02e12..a9af415101 100644 --- a/configs/odroid-go2_defconfig +++ b/configs/odroid-go2_defconfig @@ -5,7 +5,7 @@ CONFIG_ARCH_ROCKCHIP=y CONFIG_NR_DRAM_BANKS=1 CONFIG_ENV_SIZE=0x4000 CONFIG_ENV_OFFSET=0x4000 -CONFIG_DEFAULT_DEVICE_TREE="rk3326-odroid-go2" +CONFIG_DEFAULT_DEVICE_TREE="rockchip/rk3326-odroid-go2" CONFIG_DM_RESET=y CONFIG_ROCKCHIP_PX30=y # CONFIG_TPL_ROCKCHIP_COMMON_BOARD is not set diff --git a/configs/px30-core-ctouch2-of10-px30_defconfig b/configs/px30-core-ctouch2-of10-px30_defconfig index dd005f20ff..fdcbd8a0fc 100644 --- a/configs/px30-core-ctouch2-of10-px30_defconfig +++ b/configs/px30-core-ctouch2-of10-px30_defconfig @@ -3,7 +3,7 @@ CONFIG_SKIP_LOWLEVEL_INIT=y CONFIG_COUNTER_FREQUENCY=24000000 CONFIG_ARCH_ROCKCHIP=y CONFIG_NR_DRAM_BANKS=1 -CONFIG_DEFAULT_DEVICE_TREE="px30-engicam-px30-core-ctouch2-of10" +CONFIG_DEFAULT_DEVICE_TREE="rockchip/px30-engicam-px30-core-ctouch2-of10" CONFIG_DM_RESET=y CONFIG_ROCKCHIP_PX30=y # CONFIG_TPL_ROCKCHIP_COMMON_BOARD is not set diff --git a/configs/px30-core-ctouch2-px30_defconfig b/configs/px30-core-ctouch2-px30_defconfig index f6559fbae3..343fd0bf51 100644 --- a/configs/px30-core-ctouch2-px30_defconfig +++ b/configs/px30-core-ctouch2-px30_defconfig @@ -3,7 +3,7 @@ CONFIG_SKIP_LOWLEVEL_INIT=y CONFIG_COUNTER_FREQUENCY=24000000 CONFIG_ARCH_ROCKCHIP=y CONFIG_NR_DRAM_BANKS=1 -CONFIG_DEFAULT_DEVICE_TREE="px30-engicam-px30-core-ctouch2" +CONFIG_DEFAULT_DEVICE_TREE="rockchip/px30-engicam-px30-core-ctouch2" CONFIG_DM_RESET=y CONFIG_ROCKCHIP_PX30=y # CONFIG_TPL_ROCKCHIP_COMMON_BOARD is not set diff --git a/configs/px30-core-edimm2.2-px30_defconfig b/configs/px30-core-edimm2.2-px30_defconfig index a099e9378c..aa0bff4667 100644 --- a/configs/px30-core-edimm2.2-px30_defconfig +++ b/configs/px30-core-edimm2.2-px30_defconfig @@ -3,7 +3,7 @@ CONFIG_SKIP_LOWLEVEL_INIT=y CONFIG_COUNTER_FREQUENCY=24000000 CONFIG_ARCH_ROCKCHIP=y CONFIG_NR_DRAM_BANKS=1 -CONFIG_DEFAULT_DEVICE_TREE="px30-engicam-px30-core-edimm2.2" +CONFIG_DEFAULT_DEVICE_TREE="rockchip/px30-engicam-px30-core-edimm2.2" CONFIG_DM_RESET=y CONFIG_ROCKCHIP_PX30=y # CONFIG_TPL_ROCKCHIP_COMMON_BOARD is not set diff --git a/configs/ringneck-px30_defconfig b/configs/ringneck-px30_defconfig index 94179dca3a..dedf35d434 100644 --- a/configs/ringneck-px30_defconfig +++ b/configs/ringneck-px30_defconfig @@ -4,7 +4,7 @@ CONFIG_COUNTER_FREQUENCY=24000000 CONFIG_ARCH_ROCKCHIP=y CONFIG_SPL_GPIO=y CONFIG_NR_DRAM_BANKS=2 -CONFIG_DEFAULT_DEVICE_TREE="px30-ringneck-haikou" +CONFIG_DEFAULT_DEVICE_TREE="rockchip/px30-ringneck-haikou" CONFIG_DM_RESET=y CONFIG_ROCKCHIP_PX30=y # CONFIG_TPL_ROCKCHIP_COMMON_BOARD is not set