From: Simon Glass Date: Mon, 13 Jun 2016 05:30:28 +0000 (-0600) Subject: dm: mmc: sdhci: Support CONFIG_BLK and CONFIG_DM_MMC_OPS X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=ef1e4eda6b4ef2077a943b638b33f95d715062ae;p=u-boot.git dm: mmc: sdhci: Support CONFIG_BLK and CONFIG_DM_MMC_OPS Add support for using driver model for block devices and MMC operations in this driver. Signed-off-by: Simon Glass --- diff --git a/drivers/mmc/sdhci.c b/drivers/mmc/sdhci.c index 8db7ec8c3e..de8d8ea70c 100644 --- a/drivers/mmc/sdhci.c +++ b/drivers/mmc/sdhci.c @@ -130,9 +130,17 @@ static int sdhci_transfer_data(struct sdhci_host *host, struct mmc_data *data, #define CONFIG_SDHCI_CMD_DEFAULT_TIMEOUT 100 #define SDHCI_READ_STATUS_TIMEOUT 1000 +#ifdef CONFIG_DM_MMC_OPS +static int sdhci_send_command(struct udevice *dev, struct mmc_cmd *cmd, + struct mmc_data *data) +{ + struct mmc *mmc = mmc_get_mmc_dev(dev); + +#else static int sdhci_send_command(struct mmc *mmc, struct mmc_cmd *cmd, - struct mmc_data *data) + struct mmc_data *data) { +#endif struct sdhci_host *host = mmc->priv; unsigned int stat = 0; int ret = 0; @@ -390,8 +398,14 @@ static void sdhci_set_power(struct sdhci_host *host, unsigned short power) sdhci_writeb(host, pwr, SDHCI_POWER_CONTROL); } +#ifdef CONFIG_DM_MMC_OPS +static int sdhci_set_ios(struct udevice *dev) +{ + struct mmc *mmc = mmc_get_mmc_dev(dev); +#else static void sdhci_set_ios(struct mmc *mmc) { +#endif u32 ctrl; struct sdhci_host *host = mmc->priv; @@ -427,6 +441,9 @@ static void sdhci_set_ios(struct mmc *mmc) ctrl &= ~SDHCI_CTRL_HISPD; sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL); +#ifdef CONFIG_DM_MMC_OPS + return 0; +#endif } static int sdhci_init(struct mmc *mmc) @@ -473,12 +490,25 @@ static int sdhci_init(struct mmc *mmc) return 0; } +#ifdef CONFIG_DM_MMC_OPS +int sdhci_probe(struct udevice *dev) +{ + struct mmc *mmc = mmc_get_mmc_dev(dev); + + return sdhci_init(mmc); +} +const struct dm_mmc_ops sdhci_ops = { + .send_cmd = sdhci_send_command, + .set_ios = sdhci_set_ios, +}; +#else static const struct mmc_ops sdhci_ops = { .send_cmd = sdhci_send_command, .set_ios = sdhci_set_ios, .init = sdhci_init, }; +#endif int sdhci_setup_cfg(struct mmc_config *cfg, const char *name, int buswidth, uint caps, u32 max_clk, u32 min_clk, uint version, @@ -529,11 +559,18 @@ int sdhci_setup_cfg(struct mmc_config *cfg, const char *name, int buswidth, if (host_caps) cfg->host_caps |= host_caps; + cfg->b_max = CONFIG_SYS_MMC_MAX_BLK_COUNT; return 0; } +#ifdef CONFIG_BLK +int sdhci_bind(struct udevice *dev, struct mmc *mmc, struct mmc_config *cfg) +{ + return mmc_bind(dev, mmc, cfg); +} +#else int add_sdhci(struct sdhci_host *host, u32 max_clk, u32 min_clk) { unsigned int caps; @@ -568,3 +605,4 @@ int add_sdhci(struct sdhci_host *host, u32 max_clk, u32 min_clk) return 0; } +#endif diff --git a/include/sdhci.h b/include/sdhci.h index e0f66670b6..c4d3b552d1 100644 --- a/include/sdhci.h +++ b/include/sdhci.h @@ -338,5 +338,85 @@ static inline u8 sdhci_readb(struct sdhci_host *host, int reg) } #endif +#ifdef CONFIG_BLK +/** + * sdhci_setup_cfg() - Set up the configuration for DWMMC + * + * This is used to set up an SDHCI device when you are using CONFIG_BLK. + * + * This should be called from your MMC driver's probe() method once you have + * the information required. + * + * Generally your driver will have a platform data structure which holds both + * the configuration (struct mmc_config) and the MMC device info (struct mmc). + * For example: + * + * struct msm_sdhc_plat { + * struct mmc_config cfg; + * struct mmc mmc; + * }; + * + * ... + * + * Inside U_BOOT_DRIVER(): + * .platdata_auto_alloc_size = sizeof(struct msm_sdhc_plat), + * + * To access platform data: + * struct msm_sdhc_plat *plat = dev_get_platdata(dev); + * + * See msm_sdhci.c for an example. + * + * @cfg: Configuration structure to fill in (generally &plat->mmc) + * @name: Device name (normally dev->name) + * @buswidth: Bus width (in bits, such as 4 or 8) + * @caps: Host capabilities (MMC_MODE_...) + * @max_clk: Maximum supported clock speed in HZ (0 for default) + * @min_clk: Minimum supported clock speed in HZ (0 for default) + * @version: Host controller version (generally read from the + * SDHCI_HOST_VERSION register) + * @quirks: Quick flags (SDHCI_QUIRK_...) + * @host_caps: Additional host capabilities (0 if none) + */ +int sdhci_setup_cfg(struct mmc_config *cfg, const char *name, int buswidth, + uint caps, u32 max_clk, u32 min_clk, uint version, + uint quirks, uint host_caps); + +/** + * sdhci_bind() - Set up a new MMC block device + * + * This is used to set up an SDHCI block device when you are using CONFIG_BLK. + * It should be called from your driver's bind() method. + * + * See msm_sdhci.c for an example. + * + * @dev: Device to set up + * @mmc: Pointer to mmc structure (normally &plat->mmc) + * @cfg: Empty configuration structure (generally &plat->cfg). This is + * normally all zeroes at this point. The only purpose of passing + * this in is to set mmc->cfg to it. + * @return 0 if OK, -ve if the block device could not be created + */ +int sdhci_bind(struct udevice *dev, struct mmc *mmc, struct mmc_config *cfg); +#else + +/** + * add_sdhci() - Add a new SDHCI interface + * + * This is used when you are not using CONFIG_BLK. Convert your driver over! + * + * @host: SDHCI host structure + * @max_clk: Maximum supported clock speed in HZ (0 for default) + * @min_clk: Minimum supported clock speed in HZ (0 for default) + * @return 0 if OK, -ve on error + */ int add_sdhci(struct sdhci_host *host, u32 max_clk, u32 min_clk); +#endif /* !CONFIG_BLK */ + +#ifdef CONFIG_DM_MMC_OPS +/* Export the operations to drivers */ +int sdhci_probe(struct udevice *dev); +extern const struct dm_mmc_ops sdhci_ops; +#else +#endif + #endif /* __SDHCI_HW_H */