From: Eric Bénard Date: Tue, 25 Jan 2011 22:31:23 +0000 (+0100) Subject: mp2usb: remove board support X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=ee986e2a7d1fd38568e2e5f83563b7bc4f607963;p=u-boot.git mp2usb: remove board support this board was cancelled long time ago so remove it as it won't be maintained anymore Signed-off-by: Eric Bénard --- diff --git a/board/mp2usb/Makefile b/board/mp2usb/Makefile deleted file mode 100644 index 335734a7ab..0000000000 --- a/board/mp2usb/Makefile +++ /dev/null @@ -1,50 +0,0 @@ -# -# (C) Copyright 2003-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# - -include $(TOPDIR)/config.mk - -LIB = $(obj)lib$(BOARD).o - -COBJS := mp2usb.o flash.o - -SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) -OBJS := $(addprefix $(obj),$(COBJS)) -SOBJS := $(addprefix $(obj),$(SOBJS)) - -$(LIB): $(obj).depend $(OBJS) - $(call cmd_link_o_target, $(OBJS)) - -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - -######################################################################### - -# defines $(obj).depend target -include $(SRCTREE)/rules.mk - -sinclude $(obj).depend - -######################################################################### diff --git a/board/mp2usb/config.mk b/board/mp2usb/config.mk deleted file mode 100644 index 948e4ffb69..0000000000 --- a/board/mp2usb/config.mk +++ /dev/null @@ -1,3 +0,0 @@ -CONFIG_SYS_TEXT_BASE = 0x27F00000 -## For testing: load at 0x20100000 and "go" at 0x201000A4 -#CONFIG_SYS_TEXT_BASE = 0x20100000 diff --git a/board/mp2usb/flash.c b/board/mp2usb/flash.c deleted file mode 100644 index 21a8ef9e54..0000000000 --- a/board/mp2usb/flash.c +++ /dev/null @@ -1,552 +0,0 @@ -/* - * (C) Copyright 2001 - * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net - * - * (C) Copyright 2001 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * Modified for the MP2USB by (C) Copyright 2005 Eric Benard - * ebenard@eukrea.com - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include -#include - -#define CONFIG_SYS_MAX_FLASH_BANKS 1 -#define PHYS_FLASH_SECT_SIZE 0x00020000 /* 128 KB sectors (x1) */ - -flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */ - -#define FLASH_PORT_WIDTH ushort -#define FLASH_PORT_WIDTHV vu_short -#define SWAP(x) __swab16(x) - -#define FPW FLASH_PORT_WIDTH -#define FPWV FLASH_PORT_WIDTHV - -#define mb() __asm__ __volatile__ ("" : : : "memory") - -/* Intel-compatible flash commands */ -#define INTEL_PROGRAM 0x00100010 -#define INTEL_ERASE 0x00200020 -#define INTEL_PROG 0x00400040 -#define INTEL_CLEAR 0x00500050 -#define INTEL_LOCKBIT 0x00600060 -#define INTEL_PROTECT 0x00010001 -#define INTEL_STATUS 0x00700070 -#define INTEL_READID 0x00900090 -#define INTEL_SUSPEND 0x00B000B0 -#define INTEL_CONFIRM 0x00D000D0 -#define INTEL_RESET 0xFFFFFFFF - -/* Intel-compatible flash status bits */ -#define INTEL_FINISHED 0x00800080 -#define INTEL_OK 0x00800080 - -/*----------------------------------------------------------------------- - * Functions - */ -static ulong flash_get_size (FPW *addr, flash_info_t *info); -static int write_data (flash_info_t *info, ulong dest, FPW data); -static void flash_get_offsets (ulong base, flash_info_t *info); -void inline spin_wheel (void); - -/*----------------------------------------------------------------------- - */ - -unsigned long flash_init (void) -{ - int i; - ulong size = 0; - - for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) { - switch (i) { - case 0: - flash_get_size ((FPW *) PHYS_FLASH_1, &flash_info[i]); - flash_get_offsets (PHYS_FLASH_1, &flash_info[i]); - break; - default: - panic ("configured too many flash banks!\n"); - break; - } - size += flash_info[i].size; - } - - /* Protect monitor and environment sectors - */ - flash_protect ( FLAG_PROTECT_SET, - CONFIG_SYS_FLASH_BASE, - CONFIG_SYS_FLASH_BASE + monitor_flash_len - 1, - &flash_info[0] ); - - flash_protect ( FLAG_PROTECT_SET, - CONFIG_ENV_ADDR, - CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, &flash_info[0] ); - - return size; -} - -/*----------------------------------------------------------------------- - */ -static void flash_get_offsets (ulong base, flash_info_t *info) -{ - int i; - - if (info->flash_id == FLASH_UNKNOWN) { - return; - } - - if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL) { - for (i = 0; i < info->sector_count; i++) { - info->start[i] = base + (i * PHYS_FLASH_SECT_SIZE); - info->protect[i] = 0; - } - } -} - -/*----------------------------------------------------------------------- - */ -void flash_print_info (flash_info_t *info) -{ - int i; - - if (info->flash_id == FLASH_UNKNOWN) { - printf ("missing or unknown FLASH type\n"); - return; - } - - switch (info->flash_id & FLASH_VENDMASK) { - case FLASH_MAN_INTEL: - printf ("INTEL "); - break; - default: - printf ("Unknown Vendor "); - break; - } - - switch (info->flash_id & FLASH_TYPEMASK) { - case FLASH_28F640J3A: - printf ("28F640J3A\n"); - break; - case FLASH_28F128J3A: - printf ("28F128J3A\n"); - break; - default: - printf ("Unknown Chip Type\n"); - break; - } - - printf (" Size: %ld MB in %d Sectors\n", - info->size >> 20, info->sector_count); - - printf (" Sector Start Addresses:"); - for (i = 0; i < info->sector_count; ++i) { - if ((i % 5) == 0) - printf ("\n "); - printf (" %08lX%s", - info->start[i], - info->protect[i] ? " (RO)" : " "); - } - printf ("\n"); - return; -} - -/* - * The following code cannot be run from FLASH! - */ -static ulong flash_get_size (FPW *addr, flash_info_t *info) -{ - volatile FPW value; - - /* Write auto select command: read Manufacturer ID */ - addr[0x5555] = (FPW) 0x00AA00AA; - addr[0x2AAA] = (FPW) 0x00550055; - addr[0x5555] = (FPW) 0x00900090; - - mb (); - value = addr[0]; - - switch (value) { - - case (FPW) INTEL_MANUFACT: - info->flash_id = FLASH_MAN_INTEL; - break; - - default: - info->flash_id = FLASH_UNKNOWN; - info->sector_count = 0; - info->size = 0; - addr[0] = (FPW) INTEL_RESET; /* restore read mode */ - return (0); /* no or unknown flash */ - } - - mb (); - value = addr[1]; /* device ID */ - - switch (value) { - - case (FPW) INTEL_ID_28F640J3A: - info->flash_id += FLASH_28F640J3A; - info->sector_count = 64; - info->size = 0x00800000; - break; /* => 8 MB */ - - case (FPW) INTEL_ID_28F128J3A: - info->flash_id += FLASH_28F128J3A; - info->sector_count = 128; - info->size = 0x01000000; - break; /* => 16 MB */ - - default: - info->flash_id = FLASH_UNKNOWN; - break; - } - - if (info->sector_count > CONFIG_SYS_MAX_FLASH_SECT) { - printf ("** ERROR: sector count %d > max (%d) **\n", - info->sector_count, CONFIG_SYS_MAX_FLASH_SECT); - info->sector_count = CONFIG_SYS_MAX_FLASH_SECT; - } - - addr[0] = (FPW) INTEL_RESET; /* restore read mode */ - - return (info->size); -} - - -/*----------------------------------------------------------------------- - */ - -int flash_erase (flash_info_t *info, int s_first, int s_last) -{ - int prot, sect; - ulong type, start, last; - int rcode = 0; - int cflag, iflag; - - if ((s_first < 0) || (s_first > s_last)) { - if (info->flash_id == FLASH_UNKNOWN) { - printf ("- missing\n"); - } else { - printf ("- no sectors to erase\n"); - } - return 1; - } - - type = (info->flash_id & FLASH_VENDMASK); - if ((type != FLASH_MAN_INTEL)) { - printf ("Can't erase unknown flash type %08lx - aborted\n", - info->flash_id); - return 1; - } - - prot = 0; - for (sect = s_first; sect <= s_last; ++sect) { - if (info->protect[sect]) { - prot++; - } - } - - if (prot) { - printf ("- Warning: %d protected sectors will not be erased!\n", - prot); - } else { - printf ("\n"); - } - - start = get_timer (0); - last = start; - - /* - * Disable interrupts which might cause a timeout - * here. Remember that our exception vectors are - * at address 0 in the flash, and we don't want a - * (ticker) exception to happen while the flash - * chip is in programming mode. - */ - cflag = icache_status (); - icache_disable (); - /* Disable interrupts which might cause a timeout here */ - iflag = disable_interrupts (); - - /* Start erase on unprotected sectors */ - for (sect = s_first; sect <= s_last; sect++) { - if (info->protect[sect] == 0) { /* not protected */ - FPWV *addr = (FPWV *) (info->start[sect]); - FPW status; - - printf ("Erasing sector %2d ... ", sect); - - /* arm simple, non interrupt dependent timer */ - reset_timer_masked (); - - *addr = (FPW) INTEL_CLEAR; /* clear status register */ - *addr = (FPW) INTEL_ERASE; /* erase setup */ - *addr = (FPW) INTEL_CONFIRM; /* erase confirm */ - - while (((status = *addr) & (FPW) INTEL_FINISHED) != (FPW) INTEL_FINISHED) { - if (get_timer_masked () > CONFIG_SYS_FLASH_ERASE_TOUT) { - printf ("Timeout\n"); - *addr = (FPW) INTEL_SUSPEND; /* suspend erase */ - *addr = (FPW) INTEL_RESET; /* reset to read mode */ - rcode = 1; - break; - } - } - - *addr = (FPWV)INTEL_CLEAR; /* clear status register cmd. */ - *addr = (FPWV)INTEL_RESET; /* resest to read mode */ - - printf (" done\n"); - } - } - - if (iflag) - enable_interrupts (); - - if (cflag) - icache_enable (); - - return rcode; -} - -/*----------------------------------------------------------------------- - * Copy memory to flash, returns: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - * 4 - Flash not identified - */ - -int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt) -{ - ulong cp, wp; - FPW data; - int count, i, l, rc, port_width; - - if (info->flash_id == FLASH_UNKNOWN) { - return 4; - } - - /* get lower word aligned address */ - wp = (addr & ~1); - port_width = 2; - - /* - * handle unaligned start bytes - */ - if ((l = addr - wp) != 0) { - data = 0; - for (i = 0, cp = wp; i < l; ++i, ++cp) { - data = (data << 8) | (*(uchar *) cp); - } - for (; i < port_width && cnt > 0; ++i) { - data = (data << 8) | *src++; - --cnt; - ++cp; - } - for (; cnt == 0 && i < port_width; ++i, ++cp) { - data = (data << 8) | (*(uchar *) cp); - } - - if ((rc = write_data (info, wp, SWAP (data))) != 0) { - return (rc); - } - wp += port_width; - } - - /* - * handle word aligned part - */ - count = 0; - while (cnt >= port_width) { - data = 0; - for (i = 0; i < port_width; ++i) { - data = (data << 8) | *src++; - } - if ((rc = write_data (info, wp, SWAP (data))) != 0) { - return (rc); - } - wp += port_width; - cnt -= port_width; - if (count++ > 0x800) { - spin_wheel (); - count = 0; - } - } - - if (cnt == 0) { - return (0); - } - - /* - * handle unaligned tail bytes - */ - data = 0; - for (i = 0, cp = wp; i < port_width && cnt > 0; ++i, ++cp) { - data = (data << 8) | *src++; - --cnt; - } - for (; i < port_width; ++i, ++cp) { - data = (data << 8) | (*(uchar *) cp); - } - - return (write_data (info, wp, SWAP (data))); -} - -/*----------------------------------------------------------------------- - * Write a word or halfword to Flash, returns: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - */ -static int write_data (flash_info_t *info, ulong dest, FPW data) -{ - FPWV *addr = (FPWV *) dest; - ulong status; - int cflag, iflag; - - /* Check if Flash is (sufficiently) erased */ - if ((*addr & data) != data) { - printf ("not erased at %08lx (%lx)\n", (ulong) addr, (ulong) *addr); - return (2); - } - /* - * Disable interrupts which might cause a timeout - * here. Remember that our exception vectors are - * at address 0 in the flash, and we don't want a - * (ticker) exception to happen while the flash - * chip is in programming mode. - */ - cflag = icache_status (); - icache_disable (); - /* Disable interrupts which might cause a timeout here */ - iflag = disable_interrupts (); - - *addr = (FPW) INTEL_PROG; /* write setup */ - *addr = data; - - /* arm simple, non interrupt dependent timer */ - reset_timer_masked (); - - /* wait while polling the status register */ - while (((status = *addr) & (FPW) INTEL_FINISHED) != (FPW) INTEL_FINISHED) { - if (get_timer_masked () > CONFIG_SYS_FLASH_WRITE_TOUT) { - *addr = (FPW) INTEL_RESET; /* restore read mode */ - return (1); - } - } - - *addr = (FPW) INTEL_RESET; /* restore read mode */ - - if (iflag) - enable_interrupts (); - - if (cflag) - icache_enable (); - - return (0); -} - -void inline spin_wheel (void) -{ - static int p = 0; - static char w[] = "\\/-"; - - printf ("\010%c", w[p]); - (++p == 3) ? (p = 0) : 0; -} - -/*----------------------------------------------------------------------- - * Set/Clear sector's lock bit, returns: - * 0 - OK - * 1 - Error (timeout, voltage problems, etc.) - */ -int flash_real_protect(flash_info_t *info, long sector, int prot) -{ - int i; - int rc = 0; - FPWV *addr = (FPWV *)(info->start[sector]); - int flag = disable_interrupts(); - - *addr = (FPW) INTEL_CLEAR; /* Clear status register */ - if (prot) { /* Set sector lock bit */ - *addr = (FPW) INTEL_LOCKBIT; /* Sector lock bit */ - *addr = (FPW) INTEL_PROTECT; /* set */ - } - else { /* Clear sector lock bit */ - *addr = (FPW) INTEL_LOCKBIT; /* All sectors lock bits */ - *addr = (FPW) INTEL_CONFIRM; /* clear */ - } - - reset_timer_masked (); - - while ((*addr & (FPW) INTEL_FINISHED) != (FPW) INTEL_FINISHED) { - if (get_timer_masked () > CONFIG_SYS_FLASH_UNLOCK_TOUT) { - printf("Flash lock bit operation timed out\n"); - rc = 1; - break; - } - } - - if (*addr != (FPW) INTEL_OK) { - printf("Flash lock bit operation failed at %08X, CSR=%08X\n", - (uint)addr, (uint)*addr); - rc = 1; - } - - if (!rc) - info->protect[sector] = prot; - - /* - * Clear lock bit command clears all sectors lock bits, so - * we have to restore lock bits of protected sectors. - */ - if (!prot) - { - for (i = 0; i < info->sector_count; i++) - { - if (info->protect[i]) - { - reset_timer_masked (); - addr = (FPWV *) (info->start[i]); - *addr = (FPW) INTEL_LOCKBIT; /* Sector lock bit */ - *addr = (FPW) INTEL_PROTECT; /* set */ - while ((*addr & (FPW) INTEL_FINISHED) != (FPW) INTEL_FINISHED) - { - if (get_timer_masked () > CONFIG_SYS_FLASH_UNLOCK_TOUT) - { - printf("Flash lock bit operation timed out\n"); - rc = 1; - break; - } - } - } - } - } - - if (flag) - enable_interrupts(); - - *addr = (FPW) INTEL_RESET; /* Reset to read array mode */ - - return rc; -} diff --git a/board/mp2usb/mp2usb.c b/board/mp2usb/mp2usb.c deleted file mode 100644 index e5eba6bbc0..0000000000 --- a/board/mp2usb/mp2usb.c +++ /dev/null @@ -1,98 +0,0 @@ -/* - * (C) Copyright 2002 - * Sysgo Real-Time Solutions, GmbH - * Marius Groeger - * - * Modified for the MP2USB by (C) Copyright 2005 Eric Benard - * ebenard@eukrea.com - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include -#include -#include -#include -#if defined(CONFIG_DRIVER_ETHER) -#include -#include -#endif -#include - -DECLARE_GLOBAL_DATA_PTR; - -/* - * Miscelaneous platform dependent initialisations - */ - -int board_init (void) -{ - /* Enable Ctrlc */ - console_init_f (); - - /* memory and cpu-speed are setup before relocation */ - /* so we do _nothing_ here */ - - /* arch number of MP2USB-Board. */ - gd->bd->bi_arch_number = MACH_TYPE_MP2USB; - /* adress of boot parameters */ - gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; - - return 0; -} - -int dram_init (void) -{ - gd->bd->bi_dram[0].start = PHYS_SDRAM; - gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE; - return 0; -} - -#ifdef CONFIG_DRIVER_ETHER -#if defined(CONFIG_CMD_NET) - -/* - * Name: - * at91rm9200_GetPhyInterface - * Description: - * Initialise the interface functions to the PHY - * Arguments: - * None - * Return value: - * None - */ -void at91rm9200_GetPhyInterface(AT91PS_PhyOps p_phyops) -{ - p_phyops->Init = dm9161_InitPhy; - p_phyops->IsPhyConnected = dm9161_IsPhyConnected; - p_phyops->GetLinkSpeed = dm9161_GetLinkSpeed; - p_phyops->AutoNegotiate = dm9161_AutoNegotiate; -} - -#endif -#endif /* CONFIG_DRIVER_ETHER */ - -#ifdef CONFIG_DRIVER_AT91EMAC -int board_eth_init(bd_t *bis) -{ - int rc = 0; - rc = at91emac_register(bis, 0); - return rc; -} -#endif diff --git a/include/configs/mp2usb.h b/include/configs/mp2usb.h deleted file mode 100644 index 8e398d7205..0000000000 --- a/include/configs/mp2usb.h +++ /dev/null @@ -1,242 +0,0 @@ -/* - * 2004-2005 Gary Jennejohn - * - * Modified for the MP2USB by (C) Copyright 2005 Eric Benard - * ebenard@eukrea.com - * - * Configuration settings for the MP2USB board. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#define CONFIG_AT91_LEGACY - -/* ARM asynchronous clock */ -#define AT91C_MAIN_CLOCK 179712000 /* from 18.432 MHz crystal (18432000 / 4 * 45) */ -#define AT91C_MASTER_CLOCK (AT91C_MAIN_CLOCK/3) /* peripheral clock */ - -#define AT91_SLOW_CLOCK 32768 /* slow clock */ - -#define CONFIG_ARM920T 1 /* This is an ARM920T Core */ -#define CONFIG_AT91RM9200 1 /* It's an Atmel AT91RM9200 SoC */ -#define CONFIG_AT91RM9200DK 1 /* on an AT91RM9200DK Board */ -#define CONFIG_MP2USB 1 /* on an MP2USB Board */ -#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ -#define USE_920T_MMU 1 - -#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ -#define CONFIG_SETUP_MEMORY_TAGS 1 -#define CONFIG_INITRD_TAG 1 - -#define CONFIG_SYS_ATMEL_PLL_INIT_BUG 1 -#ifndef CONFIG_SKIP_LOWLEVEL_INIT -#define CONFIG_SYS_USE_MAIN_OSCILLATOR 1 -/* flash */ -#define CONFIG_SYS_EBI_CFGR_VAL 0x00000000 -#define CONFIG_SYS_SMC_CSR0_VAL 0x00003084 /* 16bit, 2 TDF, 4 WS */ - -/* clocks */ -#define CONFIG_SYS_PLLAR_VAL 0x20263E04 /* 180 MHz for PCK */ -#define CONFIG_SYS_PLLBR_VAL 0x1048bE0E /* 48 MHz (divider by 2 for USB) */ -#define CONFIG_SYS_MCKR_VAL 0x00000202 /* PCK/3 = MCK Master Clock = 60MHz from PLLA */ - -/* sdram */ -#define CONFIG_SYS_PIOC_ASR_VAL 0xFFFF0000 /* Configure PIOC as peripheral (D16/D31) */ -#define CONFIG_SYS_PIOC_BSR_VAL 0x00000000 -#define CONFIG_SYS_PIOC_PDR_VAL 0xFFFF0000 -#define CONFIG_SYS_EBI_CSA_VAL 0x00000002 /* CS1=CONFIG_SYS_SDRAM */ -#define CONFIG_SYS_SDRC_CR_VAL 0x3211295A /* set up the CONFIG_SYS_SDRAM */ -#define CONFIG_SYS_SDRAM 0x20000000 /* address of the CONFIG_SYS_SDRAM */ -#define CONFIG_SYS_SDRAM1 0x20000020 /* address of the CONFIG_SYS_SDRAM */ -#define CONFIG_SYS_SDRAM_VAL 0x00000000 /* value written to CONFIG_SYS_SDRAM */ -#define CONFIG_SYS_SDRC_MR_VAL 0x00000002 /* Precharge All */ -#define CONFIG_SYS_SDRC_MR_VAL1 0x00000004 /* refresh */ -#define CONFIG_SYS_SDRC_MR_VAL2 0x00000003 /* Load Mode Register */ -#define CONFIG_SYS_SDRC_MR_VAL3 0x00000000 /* Normal Mode */ -#define CONFIG_SYS_SDRC_TR_VAL 0x000002E0 /* Write refresh rate */ -#endif /* CONFIG_SKIP_LOWLEVEL_INIT */ - -/* - * Size of malloc() pool - */ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) - -#define CONFIG_BAUDRATE 115200 - -#define CONFIG_SYS_AT91C_BRGR_DIVISOR 33 /* hardcode so no __divsi3 : AT91C_MASTER_CLOCK /(baudrate * 16) */ - -/* - * Hardware drivers - */ - -/* define one of these to choose the DBGU, USART0 or USART1 as console */ -#define CONFIG_AT91RM9200_USART -#define CONFIG_DBGU -#undef CONFIG_USART0 -#undef CONFIG_USART1 - -#undef CONFIG_HWFLOW /* don't include RTS/CTS flow control support */ - -#undef CONFIG_MODEM_SUPPORT /* disable modem initialization stuff */ - -#define CONFIG_USB_OHCI_NEW 1 -#define CONFIG_USB_KEYBOARD 1 -#define CONFIG_USB_STORAGE 1 -#define CONFIG_DOS_PARTITION 1 -#define CONFIG_AT91C_PQFP_UHPBUG 1 - -#undef CONFIG_SYS_USB_OHCI_BOARD_INIT -#define CONFIG_SYS_USB_OHCI_CPU_INIT 1 -#define CONFIG_SYS_USB_OHCI_REGS_BASE AT91_USB_HOST_BASE -#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91rm9200" -#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 15 - -#undef CONFIG_HARD_I2C - -#ifdef CONFIG_HARD_I2C -#define CONFIG_SYS_I2C_SPEED 0 /* not used */ -#define CONFIG_SYS_I2C_SLAVE 0 /* not used */ -#define CONFIG_RTC_RS5C372A /* RICOH I2C RTC */ -#define CONFIG_SYS_I2C_RTC_ADDR 0x32 -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 -#define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW -#endif -/* still about 20 kB free with this defined */ -#define CONFIG_SYS_LONGHELP - -#define CONFIG_BOOTDELAY 3 - -#if !defined(CONFIG_HARD_I2C) -#define CONFIG_TIMESTAMP -#endif - - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - - -/* - * Command line configuration. - */ -#include - -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_NFS -#define CONFIG_CMD_SNTP - -#if defined(CONFIG_HARD_I2C) - - #define CONFIG_CMD_DATE - #define CONFIG_CMD_EEPROM - #define CONFIG_CMD_I2C - #define CONFIG_CMD_MISC - -#else - - #define CONFIG_CMD_CACHE - #define CONFIG_CMD_USB - - #undef CONFIG_CMD_BDI - #undef CONFIG_CMD_FPGA - #undef CONFIG_CMD_IMI - #undef CONFIG_CMD_LOADS - #undef CONFIG_CMD_MISC - #undef CONFIG_CMD_SOURCE - -#endif - - -#define CONFIG_SYS_LONGHELP - -#define CONFIG_NR_DRAM_BANKS 1 -#define PHYS_SDRAM 0x20000000 -#define PHYS_SDRAM_SIZE 0x08000000 /* 128 megs */ - -#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM -#define CONFIG_SYS_MEMTEST_END CONFIG_SYS_MEMTEST_START + PHYS_SDRAM_SIZE - 262144 - -#define CONFIG_NET_MULTI 1 -#ifdef CONFIG_NET_MULTI -#define CONFIG_DRIVER_AT91EMAC 1 -#define CONFIG_SYS_RX_ETH_BUFFER 8 -#else -#define CONFIG_DRIVER_ETHER 1 -#endif -#define CONFIG_NET_RETRY_COUNT 20 -#undef CONFIG_AT91C_USE_RMII - -#define PHYS_FLASH_1 0x10000000 -#define PHYS_FLASH_SIZE 0x1000000 /* 16 megs main flash */ -#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_MAX_FLASH_BANKS 1 -#define CONFIG_SYS_MAX_FLASH_SECT 256 -#define CONFIG_SYS_FLASH_ERASE_TOUT (2 * CONFIG_SYS_HZ) /* Timeout for Flash Erase */ -#define CONFIG_SYS_FLASH_WRITE_TOUT (2 * CONFIG_SYS_HZ) /* Timeout for Flash Write */ -#define CONFIG_SYS_FLASH_LOCK_TOUT (10*CONFIG_SYS_HZ) /* Timeout for Flash Set Lock Bit */ -#define CONFIG_SYS_FLASH_UNLOCK_TOUT (10*CONFIG_SYS_HZ) /* Timeout for Flash Clear Lock Bits */ -#define CONFIG_SYS_FLASH_PROTECTION /* "Real" (hardware) sectors protection */ - -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_OFFSET 0x20000 /* after u-boot.bin */ -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE+CONFIG_ENV_OFFSET) -#define CONFIG_ENV_SIZE 0x20000 - -#define CONFIG_SYS_LOAD_ADDR 0x21000000 /* default load address */ - -#define CONFIG_SYS_BAUDRATE_TABLE { 115200, 57600, 38400, 19200, 9600 } - -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#define CONFIG_SYS_MAXARGS 32 /* max number of command args */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ - -#define CONFIG_SYS_STDIO_DEREGISTER /* needs stdio_deregister */ - -#define CONFIG_SYS_HZ 1000 -#define CONFIG_SYS_HZ_CLOCK (AT91C_MASTER_CLOCK/2) /* AT91C_TC0_CMR is implicitly set to */ - /* AT91C_TC_TIMER_DIV1_CLOCK */ - -#define CONFIG_STACKSIZE (32*1024) /* regular stack */ - -#ifdef CONFIG_USE_IRQ -#error CONFIG_USE_IRQ not supported -#endif - -#define CONFIG_SYS_DEVICE_NULLDEV 1 /* enble null device */ -#undef CONFIG_SILENT_CONSOLE /* enable silent startup */ - -#define CONFIG_AUTOBOOT_KEYED -#define CONFIG_AUTOBOOT_PROMPT \ - "Press SPACE to abort autoboot in %d seconds\n", bootdelay -#define CONFIG_AUTOBOOT_STOP_STR " " -#define CONFIG_AUTOBOOT_DELAY_STR "d" - -#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */ - -#endif /* __CONFIG_H */