From: SRICHARAN R Date: Mon, 4 Feb 2013 04:22:01 +0000 (+0000) Subject: ARM: OMAP4+: Cleanup the clocks layer X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=ee9447bfe37a646a8dce182e6f625f27c10512a0;p=u-boot.git ARM: OMAP4+: Cleanup the clocks layer Currently there is quite a lot of code which is duplicated in the clocks code for OMAP 4 and 5 Socs. Avoiding this here by moving the clocks data to a SOC specific place and the sharing the common code. This helps in addition of a new Soc with minimal changes. Signed-off-by: R Sricharan Signed-off-by: Lokesh Vutla Reviewed-by: Tom Rini --- diff --git a/arch/arm/cpu/armv7/omap-common/clocks-common.c b/arch/arm/cpu/armv7/omap-common/clocks-common.c index d36fcccafe..2becc4aff5 100644 --- a/arch/arm/cpu/armv7/omap-common/clocks-common.c +++ b/arch/arm/cpu/armv7/omap-common/clocks-common.c @@ -47,6 +47,16 @@ #define puts(s) #endif +const u32 sys_clk_array[8] = { + 12000000, /* 12 MHz */ + 13000000, /* 13 MHz */ + 16800000, /* 16.8 MHz */ + 19200000, /* 19.2 MHz */ + 26000000, /* 26 MHz */ + 27000000, /* 27 MHz */ + 38400000, /* 38.4 MHz */ +}; + static inline u32 __get_sys_clk_index(void) { u32 ind; @@ -76,6 +86,29 @@ u32 get_sys_clk_freq(void) return sys_clk_array[index]; } +void setup_post_dividers(u32 const base, const struct dpll_params *params) +{ + struct dpll_regs *const dpll_regs = (struct dpll_regs *)base; + + /* Setup post-dividers */ + if (params->m2 >= 0) + writel(params->m2, &dpll_regs->cm_div_m2_dpll); + if (params->m3 >= 0) + writel(params->m3, &dpll_regs->cm_div_m3_dpll); + if (params->m4_h11 >= 0) + writel(params->m4_h11, &dpll_regs->cm_div_m4_h11_dpll); + if (params->m5_h12 >= 0) + writel(params->m5_h12, &dpll_regs->cm_div_m5_h12_dpll); + if (params->m6_h13 >= 0) + writel(params->m6_h13, &dpll_regs->cm_div_m6_h13_dpll); + if (params->m7_h14 >= 0) + writel(params->m7_h14, &dpll_regs->cm_div_m7_h14_dpll); + if (params->h22 >= 0) + writel(params->h22, &dpll_regs->cm_div_h22_dpll); + if (params->h23 >= 0) + writel(params->h23, &dpll_regs->cm_div_h23_dpll); +} + static inline void do_bypass_dpll(u32 const base) { struct dpll_regs *dpll_regs = (struct dpll_regs *)base; @@ -124,6 +157,46 @@ inline u32 check_for_lock(u32 const base) return lock; } +const struct dpll_params *get_mpu_dpll_params(struct dplls const *dpll_data) +{ + u32 sysclk_ind = get_sys_clk_index(); + return &dpll_data->mpu[sysclk_ind]; +} + +const struct dpll_params *get_core_dpll_params(struct dplls const *dpll_data) +{ + u32 sysclk_ind = get_sys_clk_index(); + return &dpll_data->core[sysclk_ind]; +} + +const struct dpll_params *get_per_dpll_params(struct dplls const *dpll_data) +{ + u32 sysclk_ind = get_sys_clk_index(); + return &dpll_data->per[sysclk_ind]; +} + +const struct dpll_params *get_iva_dpll_params(struct dplls const *dpll_data) +{ + u32 sysclk_ind = get_sys_clk_index(); + return &dpll_data->iva[sysclk_ind]; +} + +const struct dpll_params *get_usb_dpll_params(struct dplls const *dpll_data) +{ + u32 sysclk_ind = get_sys_clk_index(); + return &dpll_data->usb[sysclk_ind]; +} + +const struct dpll_params *get_abe_dpll_params(struct dplls const *dpll_data) +{ +#ifdef CONFIG_SYS_OMAP_ABE_SYSCK + u32 sysclk_ind = get_sys_clk_index(); + return &dpll_data->abe[sysclk_ind]; +#else + return dpll_data->abe; +#endif +} + static void do_setup_dpll(u32 const base, const struct dpll_params *params, u8 lock, char *dpll) { @@ -184,7 +257,7 @@ u32 omap_ddr_clk(void) omap_rev = omap_revision(); sys_clk_khz = get_sys_clk_freq() / 1000; - core_dpll_params = get_core_dpll_params(); + core_dpll_params = get_core_dpll_params(*dplls_data); debug("sys_clk %d\n ", sys_clk_khz * 1000); @@ -251,7 +324,7 @@ void configure_mpu_dpll(void) setbits_le32((*prcm)->cm_mpu_mpu_clkctrl, MPU_CLKCTRL_CLKSEL_ABE_DIV_MODE_MASK); - params = get_mpu_dpll_params(); + params = get_mpu_dpll_params(*dplls_data); do_setup_dpll((*prcm)->cm_clkmode_dpll_mpu, params, DPLL_LOCK, "mpu"); debug("MPU DPLL locked\n"); @@ -272,7 +345,7 @@ static void setup_usb_dpll(void) * Use CLKINP in KHz and adjust the denominator accordingly so * that we have enough accuracy and at the same time no overflow */ - params = get_usb_dpll_params(); + params = get_usb_dpll_params(*dplls_data); num = params->m * sys_clk_khz; den = (params->n + 1) * 250 * 1000; num += den - 1; @@ -294,7 +367,7 @@ static void setup_dplls(void) debug("setup_dplls\n"); /* CORE dpll */ - params = get_core_dpll_params(); /* default - safest */ + params = get_core_dpll_params(*dplls_data); /* default - safest */ /* * Do not lock the core DPLL now. Just set it up. * Core DPLL will be locked after setting up EMIF @@ -314,7 +387,7 @@ static void setup_dplls(void) debug("Core DPLL configured\n"); /* lock PER dpll */ - params = get_per_dpll_params(); + params = get_per_dpll_params(*dplls_data); do_setup_dpll((*prcm)->cm_clkmode_dpll_per, params, DPLL_LOCK, "per"); debug("PER DPLL locked\n"); @@ -337,11 +410,11 @@ static void setup_non_essential_dplls(void) clrsetbits_le32((*prcm)->cm_bypclk_dpll_iva, CM_BYPCLK_DPLL_IVA_CLKSEL_MASK, DPLL_IVA_CLKSEL_CORE_X2_DIV_2); - params = get_iva_dpll_params(); + params = get_iva_dpll_params(*dplls_data); do_setup_dpll((*prcm)->cm_clkmode_dpll_iva, params, DPLL_LOCK, "iva"); /* Configure ABE dpll */ - params = get_abe_dpll_params(); + params = get_abe_dpll_params(*dplls_data); #ifdef CONFIG_SYS_OMAP_ABE_SYSCK abe_ref_clk = CM_ABE_PLL_REF_CLKSEL_CLKSEL_SYSCLK; #else @@ -459,7 +532,7 @@ void freq_update_core(void) const struct dpll_params *core_dpll_params; u32 omap_rev = omap_revision(); - core_dpll_params = get_core_dpll_params(); + core_dpll_params = get_core_dpll_params(*dplls_data); /* Put EMIF clock domain in sw wakeup mode */ enable_clock_domain((*prcm)->cm_memif_clkstctrl, CD_CLKCTRL_CLKTRCTRL_SW_WKUP); diff --git a/arch/arm/cpu/armv7/omap4/clocks.c b/arch/arm/cpu/armv7/omap4/clocks.c index 9acceb0d45..4772743947 100644 --- a/arch/arm/cpu/armv7/omap4/clocks.c +++ b/arch/arm/cpu/armv7/omap4/clocks.c @@ -46,221 +46,6 @@ #define puts(s) #endif /* !CONFIG_SPL_BUILD */ -const u32 sys_clk_array[8] = { - 12000000, /* 12 MHz */ - 13000000, /* 13 MHz */ - 16800000, /* 16.8 MHz */ - 19200000, /* 19.2 MHz */ - 26000000, /* 26 MHz */ - 27000000, /* 27 MHz */ - 38400000, /* 38.4 MHz */ -}; - -/* - * The M & N values in the following tables are created using the - * following tool: - * tools/omap/clocks_get_m_n.c - * Please use this tool for creating the table for any new frequency. - */ - -/* dpll locked at 1400 MHz MPU clk at 700 MHz(OPP100) - DCC OFF */ -static const struct dpll_params mpu_dpll_params_1400mhz[NUM_SYS_CLKS] = { - {175, 2, 1, -1, -1, -1, -1, -1}, /* 12 MHz */ - {700, 12, 1, -1, -1, -1, -1, -1}, /* 13 MHz */ - {125, 2, 1, -1, -1, -1, -1, -1}, /* 16.8 MHz */ - {401, 10, 1, -1, -1, -1, -1, -1}, /* 19.2 MHz */ - {350, 12, 1, -1, -1, -1, -1, -1}, /* 26 MHz */ - {700, 26, 1, -1, -1, -1, -1, -1}, /* 27 MHz */ - {638, 34, 1, -1, -1, -1, -1, -1} /* 38.4 MHz */ -}; - -/* dpll locked at 1584 MHz - MPU clk at 792 MHz(OPP Turbo 4430) */ -static const struct dpll_params mpu_dpll_params_1600mhz[NUM_SYS_CLKS] = { - {200, 2, 1, -1, -1, -1, -1, -1}, /* 12 MHz */ - {800, 12, 1, -1, -1, -1, -1, -1}, /* 13 MHz */ - {619, 12, 1, -1, -1, -1, -1, -1}, /* 16.8 MHz */ - {125, 2, 1, -1, -1, -1, -1, -1}, /* 19.2 MHz */ - {400, 12, 1, -1, -1, -1, -1, -1}, /* 26 MHz */ - {800, 26, 1, -1, -1, -1, -1, -1}, /* 27 MHz */ - {125, 5, 1, -1, -1, -1, -1, -1} /* 38.4 MHz */ -}; - -/* dpll locked at 1200 MHz - MPU clk at 600 MHz */ -static const struct dpll_params mpu_dpll_params_1200mhz[NUM_SYS_CLKS] = { - {50, 0, 1, -1, -1, -1, -1, -1}, /* 12 MHz */ - {600, 12, 1, -1, -1, -1, -1, -1}, /* 13 MHz */ - {250, 6, 1, -1, -1, -1, -1, -1}, /* 16.8 MHz */ - {125, 3, 1, -1, -1, -1, -1, -1}, /* 19.2 MHz */ - {300, 12, 1, -1, -1, -1, -1, -1}, /* 26 MHz */ - {200, 8, 1, -1, -1, -1, -1, -1}, /* 27 MHz */ - {125, 7, 1, -1, -1, -1, -1, -1} /* 38.4 MHz */ -}; - -static const struct dpll_params core_dpll_params_1600mhz[NUM_SYS_CLKS] = { - {200, 2, 1, 5, 8, 4, 6, 5}, /* 12 MHz */ - {800, 12, 1, 5, 8, 4, 6, 5}, /* 13 MHz */ - {619, 12, 1, 5, 8, 4, 6, 5}, /* 16.8 MHz */ - {125, 2, 1, 5, 8, 4, 6, 5}, /* 19.2 MHz */ - {400, 12, 1, 5, 8, 4, 6, 5}, /* 26 MHz */ - {800, 26, 1, 5, 8, 4, 6, 5}, /* 27 MHz */ - {125, 5, 1, 5, 8, 4, 6, 5} /* 38.4 MHz */ -}; - -static const struct dpll_params core_dpll_params_es1_1524mhz[NUM_SYS_CLKS] = { - {127, 1, 1, 5, 8, 4, 6, 5}, /* 12 MHz */ - {762, 12, 1, 5, 8, 4, 6, 5}, /* 13 MHz */ - {635, 13, 1, 5, 8, 4, 6, 5}, /* 16.8 MHz */ - {635, 15, 1, 5, 8, 4, 6, 5}, /* 19.2 MHz */ - {381, 12, 1, 5, 8, 4, 6, 5}, /* 26 MHz */ - {254, 8, 1, 5, 8, 4, 6, 5}, /* 27 MHz */ - {496, 24, 1, 5, 8, 4, 6, 5} /* 38.4 MHz */ -}; - -static const struct dpll_params - core_dpll_params_es2_1600mhz_ddr200mhz[NUM_SYS_CLKS] = { - {200, 2, 2, 5, 8, 4, 6, 5}, /* 12 MHz */ - {800, 12, 2, 5, 8, 4, 6, 5}, /* 13 MHz */ - {619, 12, 2, 5, 8, 4, 6, 5}, /* 16.8 MHz */ - {125, 2, 2, 5, 8, 4, 6, 5}, /* 19.2 MHz */ - {400, 12, 2, 5, 8, 4, 6, 5}, /* 26 MHz */ - {800, 26, 2, 5, 8, 4, 6, 5}, /* 27 MHz */ - {125, 5, 2, 5, 8, 4, 6, 5} /* 38.4 MHz */ -}; - -static const struct dpll_params per_dpll_params_1536mhz[NUM_SYS_CLKS] = { - {64, 0, 8, 6, 12, 9, 4, 5}, /* 12 MHz */ - {768, 12, 8, 6, 12, 9, 4, 5}, /* 13 MHz */ - {320, 6, 8, 6, 12, 9, 4, 5}, /* 16.8 MHz */ - {40, 0, 8, 6, 12, 9, 4, 5}, /* 19.2 MHz */ - {384, 12, 8, 6, 12, 9, 4, 5}, /* 26 MHz */ - {256, 8, 8, 6, 12, 9, 4, 5}, /* 27 MHz */ - {20, 0, 8, 6, 12, 9, 4, 5} /* 38.4 MHz */ -}; - -static const struct dpll_params iva_dpll_params_1862mhz[NUM_SYS_CLKS] = { - {931, 11, -1, -1, 4, 7, -1, -1}, /* 12 MHz */ - {931, 12, -1, -1, 4, 7, -1, -1}, /* 13 MHz */ - {665, 11, -1, -1, 4, 7, -1, -1}, /* 16.8 MHz */ - {727, 14, -1, -1, 4, 7, -1, -1}, /* 19.2 MHz */ - {931, 25, -1, -1, 4, 7, -1, -1}, /* 26 MHz */ - {931, 26, -1, -1, 4, 7, -1, -1}, /* 27 MHz */ - {291, 11, -1, -1, 4, 7, -1, -1} /* 38.4 MHz */ -}; - -/* ABE M & N values with sys_clk as source */ -static const struct dpll_params - abe_dpll_params_sysclk_196608khz[NUM_SYS_CLKS] = { - {49, 5, 1, 1, -1, -1, -1, -1}, /* 12 MHz */ - {68, 8, 1, 1, -1, -1, -1, -1}, /* 13 MHz */ - {35, 5, 1, 1, -1, -1, -1, -1}, /* 16.8 MHz */ - {46, 8, 1, 1, -1, -1, -1, -1}, /* 19.2 MHz */ - {34, 8, 1, 1, -1, -1, -1, -1}, /* 26 MHz */ - {29, 7, 1, 1, -1, -1, -1, -1}, /* 27 MHz */ - {64, 24, 1, 1, -1, -1, -1, -1} /* 38.4 MHz */ -}; - -/* ABE M & N values with 32K clock as source */ -static const struct dpll_params abe_dpll_params_32k_196608khz = { - 750, 0, 1, 1, -1, -1, -1, -1 -}; - -static const struct dpll_params usb_dpll_params_1920mhz[NUM_SYS_CLKS] = { - {80, 0, 2, -1, -1, -1, -1, -1}, /* 12 MHz */ - {960, 12, 2, -1, -1, -1, -1, -1}, /* 13 MHz */ - {400, 6, 2, -1, -1, -1, -1, -1}, /* 16.8 MHz */ - {50, 0, 2, -1, -1, -1, -1, -1}, /* 19.2 MHz */ - {480, 12, 2, -1, -1, -1, -1, -1}, /* 26 MHz */ - {320, 8, 2, -1, -1, -1, -1, -1}, /* 27 MHz */ - {25, 0, 2, -1, -1, -1, -1, -1} /* 38.4 MHz */ -}; - -void setup_post_dividers(u32 const base, const struct dpll_params *params) -{ - struct dpll_regs *const dpll_regs = (struct dpll_regs *)base; - - /* Setup post-dividers */ - if (params->m2 >= 0) - writel(params->m2, &dpll_regs->cm_div_m2_dpll); - if (params->m3 >= 0) - writel(params->m3, &dpll_regs->cm_div_m3_dpll); - if (params->m4 >= 0) - writel(params->m4, &dpll_regs->cm_div_m4_dpll); - if (params->m5 >= 0) - writel(params->m5, &dpll_regs->cm_div_m5_dpll); - if (params->m6 >= 0) - writel(params->m6, &dpll_regs->cm_div_m6_dpll); - if (params->m7 >= 0) - writel(params->m7, &dpll_regs->cm_div_m7_dpll); -} - -/* - * Lock MPU dpll - * - * Resulting MPU frequencies: - * 4430 ES1.0 : 600 MHz - * 4430 ES2.x : 792 MHz (OPP Turbo) - * 4460 : 920 MHz (OPP Turbo) - DCC disabled - */ -const struct dpll_params *get_mpu_dpll_params(void) -{ - u32 omap_rev, sysclk_ind; - - omap_rev = omap_revision(); - sysclk_ind = get_sys_clk_index(); - - if (omap_rev == OMAP4430_ES1_0) - return &mpu_dpll_params_1200mhz[sysclk_ind]; - else if (omap_rev < OMAP4460_ES1_0) - return &mpu_dpll_params_1600mhz[sysclk_ind]; - else - return &mpu_dpll_params_1400mhz[sysclk_ind]; -} - -const struct dpll_params *get_core_dpll_params(void) -{ - u32 sysclk_ind = get_sys_clk_index(); - - switch (omap_revision()) { - case OMAP4430_ES1_0: - return &core_dpll_params_es1_1524mhz[sysclk_ind]; - case OMAP4430_ES2_0: - case OMAP4430_SILICON_ID_INVALID: - /* safest */ - return &core_dpll_params_es2_1600mhz_ddr200mhz[sysclk_ind]; - default: - return &core_dpll_params_1600mhz[sysclk_ind]; - } -} - - -const struct dpll_params *get_per_dpll_params(void) -{ - u32 sysclk_ind = get_sys_clk_index(); - return &per_dpll_params_1536mhz[sysclk_ind]; -} - -const struct dpll_params *get_iva_dpll_params(void) -{ - u32 sysclk_ind = get_sys_clk_index(); - return &iva_dpll_params_1862mhz[sysclk_ind]; -} - -const struct dpll_params *get_usb_dpll_params(void) -{ - u32 sysclk_ind = get_sys_clk_index(); - return &usb_dpll_params_1920mhz[sysclk_ind]; -} - -const struct dpll_params *get_abe_dpll_params(void) -{ -#ifdef CONFIG_SYS_OMAP_ABE_SYSCK - u32 sysclk_ind = get_sys_clk_index(); - return &abe_dpll_params_sysclk_196608khz[sysclk_ind]; -#else - return &abe_dpll_params_32k_196608khz; -#endif -} - /* * Setup the voltages for vdd_mpu, vdd_core, and vdd_iva * We set the maximum voltages allowed here because Smart-Reflex is not @@ -336,181 +121,3 @@ u32 get_offset_code(u32 offset) /* The code starts at 1 not 0 */ return ++offset_code; } - -/* - * Enable essential clock domains, modules and - * do some additional special settings needed - */ -void enable_basic_clocks(void) -{ - u32 const clk_domains_essential[] = { - (*prcm)->cm_l4per_clkstctrl, - (*prcm)->cm_l3init_clkstctrl, - (*prcm)->cm_memif_clkstctrl, - (*prcm)->cm_l4cfg_clkstctrl, - 0 - }; - - u32 const clk_modules_hw_auto_essential[] = { - (*prcm)->cm_l3_2_gpmc_clkctrl, - (*prcm)->cm_memif_emif_1_clkctrl, - (*prcm)->cm_memif_emif_2_clkctrl, - (*prcm)->cm_l4cfg_l4_cfg_clkctrl, - (*prcm)->cm_wkup_gpio1_clkctrl, - (*prcm)->cm_l4per_gpio2_clkctrl, - (*prcm)->cm_l4per_gpio3_clkctrl, - (*prcm)->cm_l4per_gpio4_clkctrl, - (*prcm)->cm_l4per_gpio5_clkctrl, - (*prcm)->cm_l4per_gpio6_clkctrl, - 0 - }; - - u32 const clk_modules_explicit_en_essential[] = { - (*prcm)->cm_wkup_gptimer1_clkctrl, - (*prcm)->cm_l3init_hsmmc1_clkctrl, - (*prcm)->cm_l3init_hsmmc2_clkctrl, - (*prcm)->cm_l4per_gptimer2_clkctrl, - (*prcm)->cm_wkup_wdtimer2_clkctrl, - (*prcm)->cm_l4per_uart3_clkctrl, - 0 - }; - - /* Enable optional additional functional clock for GPIO4 */ - setbits_le32((*prcm)->cm_l4per_gpio4_clkctrl, - GPIO4_CLKCTRL_OPTFCLKEN_MASK); - - /* Enable 96 MHz clock for MMC1 & MMC2 */ - setbits_le32((*prcm)->cm_l3init_hsmmc1_clkctrl, - HSMMC_CLKCTRL_CLKSEL_MASK); - setbits_le32((*prcm)->cm_l3init_hsmmc2_clkctrl, - HSMMC_CLKCTRL_CLKSEL_MASK); - - /* Select 32KHz clock as the source of GPTIMER1 */ - setbits_le32((*prcm)->cm_wkup_gptimer1_clkctrl, - GPTIMER1_CLKCTRL_CLKSEL_MASK); - - /* Enable optional 48M functional clock for USB PHY */ - setbits_le32((*prcm)->cm_l3init_usbphy_clkctrl, - USBPHY_CLKCTRL_OPTFCLKEN_PHY_48M_MASK); - - do_enable_clocks(clk_domains_essential, - clk_modules_hw_auto_essential, - clk_modules_explicit_en_essential, - 1); -} - -void enable_basic_uboot_clocks(void) -{ - u32 const clk_domains_essential[] = { - 0 - }; - - u32 const clk_modules_hw_auto_essential[] = { - (*prcm)->cm_l3init_hsusbotg_clkctrl, - (*prcm)->cm_l3init_usbphy_clkctrl, - (*prcm)->cm_l3init_usbphy_clkctrl, - (*prcm)->cm_clksel_usb_60mhz, - (*prcm)->cm_l3init_hsusbtll_clkctrl, - 0 - }; - - u32 const clk_modules_explicit_en_essential[] = { - (*prcm)->cm_l4per_mcspi1_clkctrl, - (*prcm)->cm_l4per_i2c1_clkctrl, - (*prcm)->cm_l4per_i2c2_clkctrl, - (*prcm)->cm_l4per_i2c3_clkctrl, - (*prcm)->cm_l4per_i2c4_clkctrl, - (*prcm)->cm_l3init_hsusbhost_clkctrl, - 0 - }; - - do_enable_clocks(clk_domains_essential, - clk_modules_hw_auto_essential, - clk_modules_explicit_en_essential, - 1); -} - -/* - * Enable non-essential clock domains, modules and - * do some additional special settings needed - */ -void enable_non_essential_clocks(void) -{ - u32 const clk_domains_non_essential[] = { - (*prcm)->cm_mpu_m3_clkstctrl, - (*prcm)->cm_ivahd_clkstctrl, - (*prcm)->cm_dsp_clkstctrl, - (*prcm)->cm_dss_clkstctrl, - (*prcm)->cm_sgx_clkstctrl, - (*prcm)->cm1_abe_clkstctrl, - (*prcm)->cm_c2c_clkstctrl, - (*prcm)->cm_cam_clkstctrl, - (*prcm)->cm_dss_clkstctrl, - (*prcm)->cm_sdma_clkstctrl, - 0 - }; - - u32 const clk_modules_hw_auto_non_essential[] = { - (*prcm)->cm_l3instr_l3_3_clkctrl, - (*prcm)->cm_l3instr_l3_instr_clkctrl, - (*prcm)->cm_l3instr_intrconn_wp1_clkctrl, - (*prcm)->cm_l3init_hsi_clkctrl, - 0 - }; - - u32 const clk_modules_explicit_en_non_essential[] = { - (*prcm)->cm1_abe_aess_clkctrl, - (*prcm)->cm1_abe_pdm_clkctrl, - (*prcm)->cm1_abe_dmic_clkctrl, - (*prcm)->cm1_abe_mcasp_clkctrl, - (*prcm)->cm1_abe_mcbsp1_clkctrl, - (*prcm)->cm1_abe_mcbsp2_clkctrl, - (*prcm)->cm1_abe_mcbsp3_clkctrl, - (*prcm)->cm1_abe_slimbus_clkctrl, - (*prcm)->cm1_abe_timer5_clkctrl, - (*prcm)->cm1_abe_timer6_clkctrl, - (*prcm)->cm1_abe_timer7_clkctrl, - (*prcm)->cm1_abe_timer8_clkctrl, - (*prcm)->cm1_abe_wdt3_clkctrl, - (*prcm)->cm_l4per_gptimer9_clkctrl, - (*prcm)->cm_l4per_gptimer10_clkctrl, - (*prcm)->cm_l4per_gptimer11_clkctrl, - (*prcm)->cm_l4per_gptimer3_clkctrl, - (*prcm)->cm_l4per_gptimer4_clkctrl, - (*prcm)->cm_l4per_hdq1w_clkctrl, - (*prcm)->cm_l4per_mcbsp4_clkctrl, - (*prcm)->cm_l4per_mcspi2_clkctrl, - (*prcm)->cm_l4per_mcspi3_clkctrl, - (*prcm)->cm_l4per_mcspi4_clkctrl, - (*prcm)->cm_l4per_mmcsd3_clkctrl, - (*prcm)->cm_l4per_mmcsd4_clkctrl, - (*prcm)->cm_l4per_mmcsd5_clkctrl, - (*prcm)->cm_l4per_uart1_clkctrl, - (*prcm)->cm_l4per_uart2_clkctrl, - (*prcm)->cm_l4per_uart4_clkctrl, - (*prcm)->cm_wkup_keyboard_clkctrl, - (*prcm)->cm_wkup_wdtimer2_clkctrl, - (*prcm)->cm_cam_iss_clkctrl, - (*prcm)->cm_cam_fdif_clkctrl, - (*prcm)->cm_dss_dss_clkctrl, - (*prcm)->cm_sgx_sgx_clkctrl, - 0 - }; - - /* Enable optional functional clock for ISS */ - setbits_le32((*prcm)->cm_cam_iss_clkctrl, ISS_CLKCTRL_OPTFCLKEN_MASK); - - /* Enable all optional functional clocks of DSS */ - setbits_le32((*prcm)->cm_dss_dss_clkctrl, DSS_CLKCTRL_OPTFCLKEN_MASK); - - do_enable_clocks(clk_domains_non_essential, - clk_modules_hw_auto_non_essential, - clk_modules_explicit_en_non_essential, - 0); - - /* Put camera module in no sleep mode */ - clrsetbits_le32((*prcm)->cm_cam_clkstctrl, - MODULE_CLKCTRL_MODULEMODE_MASK, - CD_CLKCTRL_CLKTRCTRL_NO_SLEEP << - MODULE_CLKCTRL_MODULEMODE_SHIFT); -} diff --git a/arch/arm/cpu/armv7/omap4/hw_data.c b/arch/arm/cpu/armv7/omap4/hw_data.c index 3174cc3262..6ae3986d73 100644 --- a/arch/arm/cpu/armv7/omap4/hw_data.c +++ b/arch/arm/cpu/armv7/omap4/hw_data.c @@ -27,12 +27,377 @@ */ #include #include +#include #include +#include +#include struct prcm_regs const **prcm = (struct prcm_regs const **) OMAP_SRAM_SCRATCH_PRCM_PTR; +struct dplls const **dplls_data = + (struct dplls const **) OMAP_SRAM_SCRATCH_DPLLS_PTR; + +/* + * The M & N values in the following tables are created using the + * following tool: + * tools/omap/clocks_get_m_n.c + * Please use this tool for creating the table for any new frequency. + */ + +/* dpll locked at 1400 MHz MPU clk at 700 MHz(OPP100) - DCC OFF */ +static const struct dpll_params mpu_dpll_params_1400mhz[NUM_SYS_CLKS] = { + {175, 2, 1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */ + {700, 12, 1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ + {125, 2, 1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */ + {401, 10, 1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */ + {350, 12, 1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */ + {700, 26, 1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ + {638, 34, 1, -1, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */ +}; + +/* dpll locked at 1584 MHz - MPU clk at 792 MHz(OPP Turbo 4430) */ +static const struct dpll_params mpu_dpll_params_1600mhz[NUM_SYS_CLKS] = { + {200, 2, 1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */ + {800, 12, 1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ + {619, 12, 1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */ + {125, 2, 1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */ + {400, 12, 1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */ + {800, 26, 1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ + {125, 5, 1, -1, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */ +}; + +/* dpll locked at 1200 MHz - MPU clk at 600 MHz */ +static const struct dpll_params mpu_dpll_params_1200mhz[NUM_SYS_CLKS] = { + {50, 0, 1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */ + {600, 12, 1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ + {250, 6, 1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */ + {125, 3, 1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */ + {300, 12, 1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */ + {200, 8, 1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ + {125, 7, 1, -1, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */ +}; + +static const struct dpll_params core_dpll_params_1600mhz[NUM_SYS_CLKS] = { + {200, 2, 1, 5, 8, 4, 6, 5, -1, -1}, /* 12 MHz */ + {800, 12, 1, 5, 8, 4, 6, 5, -1, -1}, /* 13 MHz */ + {619, 12, 1, 5, 8, 4, 6, 5, -1, -1}, /* 16.8 MHz */ + {125, 2, 1, 5, 8, 4, 6, 5, -1, -1}, /* 19.2 MHz */ + {400, 12, 1, 5, 8, 4, 6, 5, -1, -1}, /* 26 MHz */ + {800, 26, 1, 5, 8, 4, 6, 5, -1, -1}, /* 27 MHz */ + {125, 5, 1, 5, 8, 4, 6, 5, -1, -1} /* 38.4 MHz */ +}; + +static const struct dpll_params core_dpll_params_es1_1524mhz[NUM_SYS_CLKS] = { + {127, 1, 1, 5, 8, 4, 6, 5, -1, -1}, /* 12 MHz */ + {762, 12, 1, 5, 8, 4, 6, 5, -1, -1}, /* 13 MHz */ + {635, 13, 1, 5, 8, 4, 6, 5, -1, -1}, /* 16.8 MHz */ + {635, 15, 1, 5, 8, 4, 6, 5, -1, -1}, /* 19.2 MHz */ + {381, 12, 1, 5, 8, 4, 6, 5, -1, -1}, /* 26 MHz */ + {254, 8, 1, 5, 8, 4, 6, 5, -1, -1}, /* 27 MHz */ + {496, 24, 1, 5, 8, 4, 6, 5, -1, -1} /* 38.4 MHz */ +}; + +static const struct dpll_params + core_dpll_params_es2_1600mhz_ddr200mhz[NUM_SYS_CLKS] = { + {200, 2, 2, 5, 8, 4, 6, 5, -1, -1}, /* 12 MHz */ + {800, 12, 2, 5, 8, 4, 6, 5, -1, -1}, /* 13 MHz */ + {619, 12, 2, 5, 8, 4, 6, 5, -1, -1}, /* 16.8 MHz */ + {125, 2, 2, 5, 8, 4, 6, 5, -1, -1}, /* 19.2 MHz */ + {400, 12, 2, 5, 8, 4, 6, 5, -1, -1}, /* 26 MHz */ + {800, 26, 2, 5, 8, 4, 6, 5, -1, -1}, /* 27 MHz */ + {125, 5, 2, 5, 8, 4, 6, 5, -1, -1} /* 38.4 MHz */ +}; + +static const struct dpll_params per_dpll_params_1536mhz[NUM_SYS_CLKS] = { + {64, 0, 8, 6, 12, 9, 4, 5, -1, -1}, /* 12 MHz */ + {768, 12, 8, 6, 12, 9, 4, 5, -1, -1}, /* 13 MHz */ + {320, 6, 8, 6, 12, 9, 4, 5, -1, -1}, /* 16.8 MHz */ + {40, 0, 8, 6, 12, 9, 4, 5, -1, -1}, /* 19.2 MHz */ + {384, 12, 8, 6, 12, 9, 4, 5, -1, -1}, /* 26 MHz */ + {256, 8, 8, 6, 12, 9, 4, 5, -1, -1}, /* 27 MHz */ + {20, 0, 8, 6, 12, 9, 4, 5, -1, -1} /* 38.4 MHz */ +}; + +static const struct dpll_params iva_dpll_params_1862mhz[NUM_SYS_CLKS] = { + {931, 11, -1, -1, 4, 7, -1, -1, -1, -1}, /* 12 MHz */ + {931, 12, -1, -1, 4, 7, -1, -1, -1, -1}, /* 13 MHz */ + {665, 11, -1, -1, 4, 7, -1, -1, -1, -1}, /* 16.8 MHz */ + {727, 14, -1, -1, 4, 7, -1, -1, -1, -1}, /* 19.2 MHz */ + {931, 25, -1, -1, 4, 7, -1, -1, -1, -1}, /* 26 MHz */ + {931, 26, -1, -1, 4, 7, -1, -1, -1, -1}, /* 27 MHz */ + {291, 11, -1, -1, 4, 7, -1, -1, -1, -1} /* 38.4 MHz */ +}; + +/* ABE M & N values with sys_clk as source */ +static const struct dpll_params + abe_dpll_params_sysclk_196608khz[NUM_SYS_CLKS] = { + {49, 5, 1, 1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */ + {68, 8, 1, 1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ + {35, 5, 1, 1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */ + {46, 8, 1, 1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */ + {34, 8, 1, 1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */ + {29, 7, 1, 1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ + {64, 24, 1, 1, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */ +}; + +/* ABE M & N values with 32K clock as source */ +static const struct dpll_params abe_dpll_params_32k_196608khz = { + 750, 0, 1, 1, -1, -1, -1, -1, -1, -1 +}; + +static const struct dpll_params usb_dpll_params_1920mhz[NUM_SYS_CLKS] = { + {80, 0, 2, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */ + {960, 12, 2, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ + {400, 6, 2, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */ + {50, 0, 2, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */ + {480, 12, 2, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */ + {320, 8, 2, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ + {25, 0, 2, -1, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */ +}; + +struct dplls omap4430_dplls_es1 = { + .mpu = mpu_dpll_params_1200mhz, + .core = core_dpll_params_es1_1524mhz, + .per = per_dpll_params_1536mhz, + .iva = iva_dpll_params_1862mhz, +#ifdef CONFIG_SYS_OMAP_ABE_SYSCK + .abe = abe_dpll_params_sysclk_196608khz, +#else + .abe = &abe_dpll_params_32k_196608khz, +#endif + .usb = usb_dpll_params_1920mhz +}; + +struct dplls omap4430_dplls = { + .mpu = mpu_dpll_params_1600mhz, + .core = core_dpll_params_es2_1600mhz_ddr200mhz, + .per = per_dpll_params_1536mhz, + .iva = iva_dpll_params_1862mhz, +#ifdef CONFIG_SYS_OMAP_ABE_SYSCK + .abe = abe_dpll_params_sysclk_196608khz, +#else + .abe = &abe_dpll_params_32k_196608khz, +#endif + .usb = usb_dpll_params_1920mhz +}; + +struct dplls omap4460_dplls = { + .mpu = mpu_dpll_params_1400mhz, + .core = core_dpll_params_1600mhz, + .per = per_dpll_params_1536mhz, + .iva = iva_dpll_params_1862mhz, +#ifdef CONFIG_SYS_OMAP_ABE_SYSCK + .abe = abe_dpll_params_sysclk_196608khz, +#else + .abe = &abe_dpll_params_32k_196608khz, +#endif + .usb = usb_dpll_params_1920mhz +}; + +/* + * Enable essential clock domains, modules and + * do some additional special settings needed + */ +void enable_basic_clocks(void) +{ + u32 const clk_domains_essential[] = { + (*prcm)->cm_l4per_clkstctrl, + (*prcm)->cm_l3init_clkstctrl, + (*prcm)->cm_memif_clkstctrl, + (*prcm)->cm_l4cfg_clkstctrl, + 0 + }; + + u32 const clk_modules_hw_auto_essential[] = { + (*prcm)->cm_l3_2_gpmc_clkctrl, + (*prcm)->cm_memif_emif_1_clkctrl, + (*prcm)->cm_memif_emif_2_clkctrl, + (*prcm)->cm_l4cfg_l4_cfg_clkctrl, + (*prcm)->cm_wkup_gpio1_clkctrl, + (*prcm)->cm_l4per_gpio2_clkctrl, + (*prcm)->cm_l4per_gpio3_clkctrl, + (*prcm)->cm_l4per_gpio4_clkctrl, + (*prcm)->cm_l4per_gpio5_clkctrl, + (*prcm)->cm_l4per_gpio6_clkctrl, + 0 + }; + + u32 const clk_modules_explicit_en_essential[] = { + (*prcm)->cm_wkup_gptimer1_clkctrl, + (*prcm)->cm_l3init_hsmmc1_clkctrl, + (*prcm)->cm_l3init_hsmmc2_clkctrl, + (*prcm)->cm_l4per_gptimer2_clkctrl, + (*prcm)->cm_wkup_wdtimer2_clkctrl, + (*prcm)->cm_l4per_uart3_clkctrl, + 0 + }; + + /* Enable optional additional functional clock for GPIO4 */ + setbits_le32((*prcm)->cm_l4per_gpio4_clkctrl, + GPIO4_CLKCTRL_OPTFCLKEN_MASK); + + /* Enable 96 MHz clock for MMC1 & MMC2 */ + setbits_le32((*prcm)->cm_l3init_hsmmc1_clkctrl, + HSMMC_CLKCTRL_CLKSEL_MASK); + setbits_le32((*prcm)->cm_l3init_hsmmc2_clkctrl, + HSMMC_CLKCTRL_CLKSEL_MASK); + + /* Select 32KHz clock as the source of GPTIMER1 */ + setbits_le32((*prcm)->cm_wkup_gptimer1_clkctrl, + GPTIMER1_CLKCTRL_CLKSEL_MASK); + + /* Enable optional 48M functional clock for USB PHY */ + setbits_le32((*prcm)->cm_l3init_usbphy_clkctrl, + USBPHY_CLKCTRL_OPTFCLKEN_PHY_48M_MASK); + + do_enable_clocks(clk_domains_essential, + clk_modules_hw_auto_essential, + clk_modules_explicit_en_essential, + 1); +} + +void enable_basic_uboot_clocks(void) +{ + u32 const clk_domains_essential[] = { + 0 + }; + + u32 const clk_modules_hw_auto_essential[] = { + (*prcm)->cm_l3init_hsusbotg_clkctrl, + (*prcm)->cm_l3init_usbphy_clkctrl, + (*prcm)->cm_l3init_usbphy_clkctrl, + (*prcm)->cm_clksel_usb_60mhz, + (*prcm)->cm_l3init_hsusbtll_clkctrl, + 0 + }; + + u32 const clk_modules_explicit_en_essential[] = { + (*prcm)->cm_l4per_mcspi1_clkctrl, + (*prcm)->cm_l4per_i2c1_clkctrl, + (*prcm)->cm_l4per_i2c2_clkctrl, + (*prcm)->cm_l4per_i2c3_clkctrl, + (*prcm)->cm_l4per_i2c4_clkctrl, + (*prcm)->cm_l3init_hsusbhost_clkctrl, + 0 + }; + + do_enable_clocks(clk_domains_essential, + clk_modules_hw_auto_essential, + clk_modules_explicit_en_essential, + 1); +} + +/* + * Enable non-essential clock domains, modules and + * do some additional special settings needed + */ +void enable_non_essential_clocks(void) +{ + u32 const clk_domains_non_essential[] = { + (*prcm)->cm_mpu_m3_clkstctrl, + (*prcm)->cm_ivahd_clkstctrl, + (*prcm)->cm_dsp_clkstctrl, + (*prcm)->cm_dss_clkstctrl, + (*prcm)->cm_sgx_clkstctrl, + (*prcm)->cm1_abe_clkstctrl, + (*prcm)->cm_c2c_clkstctrl, + (*prcm)->cm_cam_clkstctrl, + (*prcm)->cm_dss_clkstctrl, + (*prcm)->cm_sdma_clkstctrl, + 0 + }; + + u32 const clk_modules_hw_auto_non_essential[] = { + (*prcm)->cm_l3instr_l3_3_clkctrl, + (*prcm)->cm_l3instr_l3_instr_clkctrl, + (*prcm)->cm_l3instr_intrconn_wp1_clkctrl, + (*prcm)->cm_l3init_hsi_clkctrl, + 0 + }; + + u32 const clk_modules_explicit_en_non_essential[] = { + (*prcm)->cm1_abe_aess_clkctrl, + (*prcm)->cm1_abe_pdm_clkctrl, + (*prcm)->cm1_abe_dmic_clkctrl, + (*prcm)->cm1_abe_mcasp_clkctrl, + (*prcm)->cm1_abe_mcbsp1_clkctrl, + (*prcm)->cm1_abe_mcbsp2_clkctrl, + (*prcm)->cm1_abe_mcbsp3_clkctrl, + (*prcm)->cm1_abe_slimbus_clkctrl, + (*prcm)->cm1_abe_timer5_clkctrl, + (*prcm)->cm1_abe_timer6_clkctrl, + (*prcm)->cm1_abe_timer7_clkctrl, + (*prcm)->cm1_abe_timer8_clkctrl, + (*prcm)->cm1_abe_wdt3_clkctrl, + (*prcm)->cm_l4per_gptimer9_clkctrl, + (*prcm)->cm_l4per_gptimer10_clkctrl, + (*prcm)->cm_l4per_gptimer11_clkctrl, + (*prcm)->cm_l4per_gptimer3_clkctrl, + (*prcm)->cm_l4per_gptimer4_clkctrl, + (*prcm)->cm_l4per_hdq1w_clkctrl, + (*prcm)->cm_l4per_mcbsp4_clkctrl, + (*prcm)->cm_l4per_mcspi2_clkctrl, + (*prcm)->cm_l4per_mcspi3_clkctrl, + (*prcm)->cm_l4per_mcspi4_clkctrl, + (*prcm)->cm_l4per_mmcsd3_clkctrl, + (*prcm)->cm_l4per_mmcsd4_clkctrl, + (*prcm)->cm_l4per_mmcsd5_clkctrl, + (*prcm)->cm_l4per_uart1_clkctrl, + (*prcm)->cm_l4per_uart2_clkctrl, + (*prcm)->cm_l4per_uart4_clkctrl, + (*prcm)->cm_wkup_keyboard_clkctrl, + (*prcm)->cm_wkup_wdtimer2_clkctrl, + (*prcm)->cm_cam_iss_clkctrl, + (*prcm)->cm_cam_fdif_clkctrl, + (*prcm)->cm_dss_dss_clkctrl, + (*prcm)->cm_sgx_sgx_clkctrl, + 0 + }; + + /* Enable optional functional clock for ISS */ + setbits_le32((*prcm)->cm_cam_iss_clkctrl, ISS_CLKCTRL_OPTFCLKEN_MASK); + + /* Enable all optional functional clocks of DSS */ + setbits_le32((*prcm)->cm_dss_dss_clkctrl, DSS_CLKCTRL_OPTFCLKEN_MASK); + + do_enable_clocks(clk_domains_non_essential, + clk_modules_hw_auto_non_essential, + clk_modules_explicit_en_non_essential, + 0); + + /* Put camera module in no sleep mode */ + clrsetbits_le32((*prcm)->cm_cam_clkstctrl, + MODULE_CLKCTRL_MODULEMODE_MASK, + CD_CLKCTRL_CLKTRCTRL_NO_SLEEP << + MODULE_CLKCTRL_MODULEMODE_SHIFT); +} void hw_data_init(void) { - *prcm = &omap4_prcm; + u32 omap_rev = omap_revision(); + + (*prcm) = &omap4_prcm; + + switch (omap_rev) { + + case OMAP4430_ES1_0: + *dplls_data = &omap4430_dplls_es1; + break; + + case OMAP4430_ES2_0: + case OMAP4430_ES2_1: + case OMAP4430_ES2_2: + case OMAP4430_ES2_3: + *dplls_data = &omap4430_dplls; + break; + + case OMAP4460_ES1_0: + case OMAP4460_ES1_1: + *dplls_data = &omap4460_dplls; + break; + + default: + printf("\n INVALID OMAP REVISION "); + } + } diff --git a/arch/arm/cpu/armv7/omap5/clocks.c b/arch/arm/cpu/armv7/omap5/clocks.c index a90f9222ca..da5b3acf1e 100644 --- a/arch/arm/cpu/armv7/omap5/clocks.c +++ b/arch/arm/cpu/armv7/omap5/clocks.c @@ -47,210 +47,6 @@ #define puts(s) #endif -const u32 sys_clk_array[8] = { - 12000000, /* 12 MHz */ - 0, /* NA */ - 16800000, /* 16.8 MHz */ - 19200000, /* 19.2 MHz */ - 26000000, /* 26 MHz */ - 0, /* NA */ - 38400000, /* 38.4 MHz */ -}; - -static const struct dpll_params mpu_dpll_params_1_5ghz[NUM_SYS_CLKS] = { - {125, 0, 1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */ - {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ - {625, 6, 1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */ - {625, 7, 1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */ - {750, 12, 1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */ - {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ - {625, 15, 1, -1, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */ -}; - -static const struct dpll_params mpu_dpll_params_2ghz[NUM_SYS_CLKS] = { - {500, 2, 1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */ - {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ - {2024, 16, 1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */ - {625, 5, 1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */ - {1000, 12, 1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */ - {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ - {625, 11, 1, -1, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */ -}; - -static const struct dpll_params mpu_dpll_params_1100mhz[NUM_SYS_CLKS] = { - {275, 2, 1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */ - {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ - {1375, 20, 1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */ - {1375, 23, 1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */ - {550, 12, 1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */ - {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ - {1375, 47, 1, -1, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */ -}; - -static const struct dpll_params mpu_dpll_params_800mhz[NUM_SYS_CLKS] = { - {200, 2, 1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */ - {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ - {1000, 20, 1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */ - {375, 8, 1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */ - {400, 12, 1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */ - {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ - {375, 17, 1, -1, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */ -}; - -static const struct dpll_params mpu_dpll_params_400mhz[NUM_SYS_CLKS] = { - {200, 2, 2, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */ - {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ - {1000, 20, 2, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */ - {375, 8, 2, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */ - {400, 12, 2, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */ - {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ - {375, 17, 2, -1, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */ -}; - -static const struct dpll_params mpu_dpll_params_550mhz[NUM_SYS_CLKS] = { - {275, 2, 2, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */ - {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ - {1375, 20, 2, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */ - {1375, 23, 2, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */ - {550, 12, 2, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */ - {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ - {1375, 47, 2, -1, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */ -}; - -static const struct dpll_params - core_dpll_params_2128mhz_ddr532[NUM_SYS_CLKS] = { - {266, 2, 2, 5, 8, 4, 62, 5, 5, 7}, /* 12 MHz */ - {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ - {570, 8, 2, 5, 8, 4, 62, 5, 5, 7}, /* 16.8 MHz */ - {665, 11, 2, 5, 8, 4, 62, 5, 5, 7}, /* 19.2 MHz */ - {532, 12, 2, 5, 8, 4, 62, 5, 5, 7}, /* 26 MHz */ - {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ - {665, 23, 2, 5, 8, 4, 62, 5, 5, 7} /* 38.4 MHz */ -}; - -static const struct dpll_params - core_dpll_params_2128mhz_ddr266[NUM_SYS_CLKS] = { - {266, 2, 4, 5, 8, 8, 62, 10, 10, 14}, /* 12 MHz */ - {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ - {570, 8, 4, 5, 8, 8, 62, 10, 10, 14}, /* 16.8 MHz */ - {665, 11, 4, 5, 8, 8, 62, 10, 10, 14}, /* 19.2 MHz */ - {532, 12, 4, 8, 8, 8, 62, 10, 10, 14}, /* 26 MHz */ - {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ - {665, 23, 4, 8, 8, 8, 62, 10, 10, 14} /* 38.4 MHz */ -}; - -static const struct dpll_params per_dpll_params_768mhz[NUM_SYS_CLKS] = { - {32, 0, 4, 3, 6, 4, -1, 2, -1, -1}, /* 12 MHz */ - {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ - {160, 6, 4, 3, 6, 4, -1, 2, -1, -1}, /* 16.8 MHz */ - {20, 0, 4, 3, 6, 4, -1, 2, -1, -1}, /* 19.2 MHz */ - {192, 12, 4, 3, 6, 4, -1, 2, -1, -1}, /* 26 MHz */ - {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ - {10, 0, 4, 3, 6, 4, -1, 2, -1, -1} /* 38.4 MHz */ -}; - -static const struct dpll_params iva_dpll_params_2330mhz[NUM_SYS_CLKS] = { - {1165, 11, -1, -1, 5, 6, -1, -1, -1, -1}, /* 12 MHz */ - {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ - {2011, 28, -1, -1, 5, 6, -1, -1, -1, -1}, /* 16.8 MHz */ - {1881, 30, -1, -1, 5, 6, -1, -1, -1, -1}, /* 19.2 MHz */ - {1165, 25, -1, -1, 5, 6, -1, -1, -1, -1}, /* 26 MHz */ - {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ - {1972, 64, -1, -1, 5, 6, -1, -1, -1, -1} /* 38.4 MHz */ -}; - -/* ABE M & N values with sys_clk as source */ -static const struct dpll_params - abe_dpll_params_sysclk_196608khz[NUM_SYS_CLKS] = { - {49, 5, 1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */ - {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ - {35, 5, 1, 1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */ - {46, 8, 1, 1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */ - {34, 8, 1, 1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */ - {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ - {64, 24, 1, 1, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */ -}; - -/* ABE M & N values with 32K clock as source */ -static const struct dpll_params abe_dpll_params_32k_196608khz = { - 750, 0, 1, 1, -1, -1, -1, -1, -1, -1 -}; - -static const struct dpll_params usb_dpll_params_1920mhz[NUM_SYS_CLKS] = { - {400, 4, 2, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */ - {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ - {400, 6, 2, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */ - {400, 7, 2, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */ - {480, 12, 2, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */ - {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ - {400, 15, 2, -1, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */ -}; - -void setup_post_dividers(u32 const base, const struct dpll_params *params) -{ - struct dpll_regs *const dpll_regs = (struct dpll_regs *)base; - - /* Setup post-dividers */ - if (params->m2 >= 0) - writel(params->m2, &dpll_regs->cm_div_m2_dpll); - if (params->m3 >= 0) - writel(params->m3, &dpll_regs->cm_div_m3_dpll); - if (params->h11 >= 0) - writel(params->h11, &dpll_regs->cm_div_h11_dpll); - if (params->h12 >= 0) - writel(params->h12, &dpll_regs->cm_div_h12_dpll); - if (params->h13 >= 0) - writel(params->h13, &dpll_regs->cm_div_h13_dpll); - if (params->h14 >= 0) - writel(params->h14, &dpll_regs->cm_div_h14_dpll); - if (params->h22 >= 0) - writel(params->h22, &dpll_regs->cm_div_h22_dpll); - if (params->h23 >= 0) - writel(params->h23, &dpll_regs->cm_div_h23_dpll); -} - -const struct dpll_params *get_mpu_dpll_params(void) -{ - u32 sysclk_ind = get_sys_clk_index(); - return &mpu_dpll_params_800mhz[sysclk_ind]; -} - -const struct dpll_params *get_core_dpll_params(void) -{ - u32 sysclk_ind = get_sys_clk_index(); - - /* Configuring the DDR to be at 532mhz */ - return &core_dpll_params_2128mhz_ddr532[sysclk_ind]; -} - -const struct dpll_params *get_per_dpll_params(void) -{ - u32 sysclk_ind = get_sys_clk_index(); - return &per_dpll_params_768mhz[sysclk_ind]; -} - -const struct dpll_params *get_iva_dpll_params(void) -{ - u32 sysclk_ind = get_sys_clk_index(); - return &iva_dpll_params_2330mhz[sysclk_ind]; -} - -const struct dpll_params *get_usb_dpll_params(void) -{ - u32 sysclk_ind = get_sys_clk_index(); - return &usb_dpll_params_1920mhz[sysclk_ind]; -} - -const struct dpll_params *get_abe_dpll_params(void) -{ -#ifdef CONFIG_SYS_OMAP_ABE_SYSCK - u32 sysclk_ind = get_sys_clk_index(); - return &abe_dpll_params_sysclk_196608khz[sysclk_ind]; -#else - return &abe_dpll_params_32k_196608khz; -#endif -} - /* * Setup the voltages for vdd_mpu, vdd_core, and vdd_iva * We set the maximum voltages allowed here because Smart-Reflex is not @@ -300,195 +96,3 @@ u32 get_offset_code(u32 volt_offset) */ return offset_code + 6; } - -/* - * Enable essential clock domains, modules and - * do some additional special settings needed - */ -void enable_basic_clocks(void) -{ - u32 const clk_domains_essential[] = { - (*prcm)->cm_l4per_clkstctrl, - (*prcm)->cm_l3init_clkstctrl, - (*prcm)->cm_memif_clkstctrl, - (*prcm)->cm_l4cfg_clkstctrl, - 0 - }; - - u32 const clk_modules_hw_auto_essential[] = { - (*prcm)->cm_l3_2_gpmc_clkctrl, - (*prcm)->cm_memif_emif_1_clkctrl, - (*prcm)->cm_memif_emif_2_clkctrl, - (*prcm)->cm_l4cfg_l4_cfg_clkctrl, - (*prcm)->cm_wkup_gpio1_clkctrl, - (*prcm)->cm_l4per_gpio2_clkctrl, - (*prcm)->cm_l4per_gpio3_clkctrl, - (*prcm)->cm_l4per_gpio4_clkctrl, - (*prcm)->cm_l4per_gpio5_clkctrl, - (*prcm)->cm_l4per_gpio6_clkctrl, - 0 - }; - - u32 const clk_modules_explicit_en_essential[] = { - (*prcm)->cm_wkup_gptimer1_clkctrl, - (*prcm)->cm_l3init_hsmmc1_clkctrl, - (*prcm)->cm_l3init_hsmmc2_clkctrl, - (*prcm)->cm_l4per_gptimer2_clkctrl, - (*prcm)->cm_wkup_wdtimer2_clkctrl, - (*prcm)->cm_l4per_uart3_clkctrl, - (*prcm)->cm_l4per_i2c1_clkctrl, - 0 - }; - - /* Enable optional additional functional clock for GPIO4 */ - setbits_le32((*prcm)->cm_l4per_gpio4_clkctrl, - GPIO4_CLKCTRL_OPTFCLKEN_MASK); - - /* Enable 96 MHz clock for MMC1 & MMC2 */ - setbits_le32((*prcm)->cm_l3init_hsmmc1_clkctrl, - HSMMC_CLKCTRL_CLKSEL_MASK); - setbits_le32((*prcm)->cm_l3init_hsmmc2_clkctrl, - HSMMC_CLKCTRL_CLKSEL_MASK); - - /* Set the correct clock dividers for mmc */ - setbits_le32((*prcm)->cm_l3init_hsmmc1_clkctrl, - HSMMC_CLKCTRL_CLKSEL_DIV_MASK); - setbits_le32((*prcm)->cm_l3init_hsmmc2_clkctrl, - HSMMC_CLKCTRL_CLKSEL_DIV_MASK); - - /* Select 32KHz clock as the source of GPTIMER1 */ - setbits_le32((*prcm)->cm_wkup_gptimer1_clkctrl, - GPTIMER1_CLKCTRL_CLKSEL_MASK); - - do_enable_clocks(clk_domains_essential, - clk_modules_hw_auto_essential, - clk_modules_explicit_en_essential, - 1); - - /* Select 384Mhz for GPU as its the POR for ES1.0 */ - setbits_le32((*prcm)->cm_sgx_sgx_clkctrl, - CLKSEL_GPU_HYD_GCLK_MASK); - setbits_le32((*prcm)->cm_sgx_sgx_clkctrl, - CLKSEL_GPU_CORE_GCLK_MASK); - - /* Enable SCRM OPT clocks for PER and CORE dpll */ - setbits_le32((*prcm)->cm_wkupaon_scrm_clkctrl, - OPTFCLKEN_SCRM_PER_MASK); - setbits_le32((*prcm)->cm_wkupaon_scrm_clkctrl, - OPTFCLKEN_SCRM_CORE_MASK); -} - -void enable_basic_uboot_clocks(void) -{ - u32 const clk_domains_essential[] = { - 0 - }; - - u32 const clk_modules_hw_auto_essential[] = { - 0 - }; - - u32 const clk_modules_explicit_en_essential[] = { - (*prcm)->cm_l4per_mcspi1_clkctrl, - (*prcm)->cm_l4per_i2c2_clkctrl, - (*prcm)->cm_l4per_i2c3_clkctrl, - (*prcm)->cm_l4per_i2c4_clkctrl, - (*prcm)->cm_l3init_hsusbtll_clkctrl, - (*prcm)->cm_l3init_hsusbhost_clkctrl, - (*prcm)->cm_l3init_fsusb_clkctrl, - 0 - }; - - do_enable_clocks(clk_domains_essential, - clk_modules_hw_auto_essential, - clk_modules_explicit_en_essential, - 1); -} - -/* - * Enable non-essential clock domains, modules and - * do some additional special settings needed - */ -void enable_non_essential_clocks(void) -{ - u32 const clk_domains_non_essential[] = { - (*prcm)->cm_mpu_m3_clkstctrl, - (*prcm)->cm_ivahd_clkstctrl, - (*prcm)->cm_dsp_clkstctrl, - (*prcm)->cm_dss_clkstctrl, - (*prcm)->cm_sgx_clkstctrl, - (*prcm)->cm1_abe_clkstctrl, - (*prcm)->cm_c2c_clkstctrl, - (*prcm)->cm_cam_clkstctrl, - (*prcm)->cm_dss_clkstctrl, - (*prcm)->cm_sdma_clkstctrl, - 0 - }; - - u32 const clk_modules_hw_auto_non_essential[] = { - (*prcm)->cm_mpu_m3_mpu_m3_clkctrl, - (*prcm)->cm_ivahd_ivahd_clkctrl, - (*prcm)->cm_ivahd_sl2_clkctrl, - (*prcm)->cm_dsp_dsp_clkctrl, - (*prcm)->cm_l3instr_l3_3_clkctrl, - (*prcm)->cm_l3instr_l3_instr_clkctrl, - (*prcm)->cm_l3instr_intrconn_wp1_clkctrl, - (*prcm)->cm_l3init_hsi_clkctrl, - (*prcm)->cm_l4per_hdq1w_clkctrl, - 0 - }; - - u32 const clk_modules_explicit_en_non_essential[] = { - (*prcm)->cm1_abe_aess_clkctrl, - (*prcm)->cm1_abe_pdm_clkctrl, - (*prcm)->cm1_abe_dmic_clkctrl, - (*prcm)->cm1_abe_mcasp_clkctrl, - (*prcm)->cm1_abe_mcbsp1_clkctrl, - (*prcm)->cm1_abe_mcbsp2_clkctrl, - (*prcm)->cm1_abe_mcbsp3_clkctrl, - (*prcm)->cm1_abe_slimbus_clkctrl, - (*prcm)->cm1_abe_timer5_clkctrl, - (*prcm)->cm1_abe_timer6_clkctrl, - (*prcm)->cm1_abe_timer7_clkctrl, - (*prcm)->cm1_abe_timer8_clkctrl, - (*prcm)->cm1_abe_wdt3_clkctrl, - (*prcm)->cm_l4per_gptimer9_clkctrl, - (*prcm)->cm_l4per_gptimer10_clkctrl, - (*prcm)->cm_l4per_gptimer11_clkctrl, - (*prcm)->cm_l4per_gptimer3_clkctrl, - (*prcm)->cm_l4per_gptimer4_clkctrl, - (*prcm)->cm_l4per_mcspi2_clkctrl, - (*prcm)->cm_l4per_mcspi3_clkctrl, - (*prcm)->cm_l4per_mcspi4_clkctrl, - (*prcm)->cm_l4per_mmcsd3_clkctrl, - (*prcm)->cm_l4per_mmcsd4_clkctrl, - (*prcm)->cm_l4per_mmcsd5_clkctrl, - (*prcm)->cm_l4per_uart1_clkctrl, - (*prcm)->cm_l4per_uart2_clkctrl, - (*prcm)->cm_l4per_uart4_clkctrl, - (*prcm)->cm_wkup_keyboard_clkctrl, - (*prcm)->cm_wkup_wdtimer2_clkctrl, - (*prcm)->cm_cam_iss_clkctrl, - (*prcm)->cm_cam_fdif_clkctrl, - (*prcm)->cm_dss_dss_clkctrl, - (*prcm)->cm_sgx_sgx_clkctrl, - 0 - }; - - /* Enable optional functional clock for ISS */ - setbits_le32((*prcm)->cm_cam_iss_clkctrl, ISS_CLKCTRL_OPTFCLKEN_MASK); - - /* Enable all optional functional clocks of DSS */ - setbits_le32((*prcm)->cm_dss_dss_clkctrl, DSS_CLKCTRL_OPTFCLKEN_MASK); - - do_enable_clocks(clk_domains_non_essential, - clk_modules_hw_auto_non_essential, - clk_modules_explicit_en_non_essential, - 0); - - /* Put camera module in no sleep mode */ - clrsetbits_le32((*prcm)->cm_cam_clkstctrl, - MODULE_CLKCTRL_MODULEMODE_MASK, - CD_CLKCTRL_CLKTRCTRL_NO_SLEEP << - MODULE_CLKCTRL_MODULEMODE_SHIFT); -} diff --git a/arch/arm/cpu/armv7/omap5/hw_data.c b/arch/arm/cpu/armv7/omap5/hw_data.c index 0f1234c1eb..df375f99a6 100644 --- a/arch/arm/cpu/armv7/omap5/hw_data.c +++ b/arch/arm/cpu/armv7/omap5/hw_data.c @@ -27,12 +27,367 @@ */ #include #include +#include #include +#include +#include struct prcm_regs const **prcm = (struct prcm_regs const **) OMAP_SRAM_SCRATCH_PRCM_PTR; +struct dplls const **dplls_data = + (struct dplls const **) OMAP_SRAM_SCRATCH_DPLLS_PTR; + +static const struct dpll_params mpu_dpll_params_1_5ghz[NUM_SYS_CLKS] = { + {125, 0, 1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ + {625, 6, 1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */ + {625, 7, 1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */ + {750, 12, 1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ + {625, 15, 1, -1, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */ +}; + +static const struct dpll_params mpu_dpll_params_2ghz[NUM_SYS_CLKS] = { + {500, 2, 1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ + {2024, 16, 1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */ + {625, 5, 1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */ + {1000, 12, 1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ + {625, 11, 1, -1, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */ +}; + +static const struct dpll_params mpu_dpll_params_1100mhz[NUM_SYS_CLKS] = { + {275, 2, 1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ + {1375, 20, 1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */ + {1375, 23, 1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */ + {550, 12, 1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ + {1375, 47, 1, -1, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */ +}; + +static const struct dpll_params mpu_dpll_params_800mhz[NUM_SYS_CLKS] = { + {200, 2, 1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ + {1000, 20, 1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */ + {375, 8, 1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */ + {400, 12, 1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ + {375, 17, 1, -1, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */ +}; + +static const struct dpll_params mpu_dpll_params_400mhz[NUM_SYS_CLKS] = { + {200, 2, 2, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ + {1000, 20, 2, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */ + {375, 8, 2, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */ + {400, 12, 2, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ + {375, 17, 2, -1, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */ +}; + +static const struct dpll_params mpu_dpll_params_550mhz[NUM_SYS_CLKS] = { + {275, 2, 2, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ + {1375, 20, 2, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */ + {1375, 23, 2, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */ + {550, 12, 2, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ + {1375, 47, 2, -1, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */ +}; + +static const struct dpll_params + core_dpll_params_2128mhz_ddr532[NUM_SYS_CLKS] = { + {266, 2, 2, 5, 8, 4, 62, 5, 5, 7}, /* 12 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ + {570, 8, 2, 5, 8, 4, 62, 5, 5, 7}, /* 16.8 MHz */ + {665, 11, 2, 5, 8, 4, 62, 5, 5, 7}, /* 19.2 MHz */ + {532, 12, 2, 5, 8, 4, 62, 5, 5, 7}, /* 26 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ + {665, 23, 2, 5, 8, 4, 62, 5, 5, 7} /* 38.4 MHz */ +}; + +static const struct dpll_params + core_dpll_params_2128mhz_ddr266[NUM_SYS_CLKS] = { + {266, 2, 4, 5, 8, 8, 62, 10, 10, 14}, /* 12 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ + {570, 8, 4, 5, 8, 8, 62, 10, 10, 14}, /* 16.8 MHz */ + {665, 11, 4, 5, 8, 8, 62, 10, 10, 14}, /* 19.2 MHz */ + {532, 12, 4, 8, 8, 8, 62, 10, 10, 14}, /* 26 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ + {665, 23, 4, 8, 8, 8, 62, 10, 10, 14} /* 38.4 MHz */ +}; + +static const struct dpll_params per_dpll_params_768mhz[NUM_SYS_CLKS] = { + {32, 0, 4, 3, 6, 4, -1, 2, -1, -1}, /* 12 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ + {160, 6, 4, 3, 6, 4, -1, 2, -1, -1}, /* 16.8 MHz */ + {20, 0, 4, 3, 6, 4, -1, 2, -1, -1}, /* 19.2 MHz */ + {192, 12, 4, 3, 6, 4, -1, 2, -1, -1}, /* 26 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ + {10, 0, 4, 3, 6, 4, -1, 2, -1, -1} /* 38.4 MHz */ +}; + +static const struct dpll_params iva_dpll_params_2330mhz[NUM_SYS_CLKS] = { + {1165, 11, -1, -1, 5, 6, -1, -1, -1, -1}, /* 12 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ + {2011, 28, -1, -1, 5, 6, -1, -1, -1, -1}, /* 16.8 MHz */ + {1881, 30, -1, -1, 5, 6, -1, -1, -1, -1}, /* 19.2 MHz */ + {1165, 25, -1, -1, 5, 6, -1, -1, -1, -1}, /* 26 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ + {1972, 64, -1, -1, 5, 6, -1, -1, -1, -1} /* 38.4 MHz */ +}; + +/* ABE M & N values with sys_clk as source */ +static const struct dpll_params + abe_dpll_params_sysclk_196608khz[NUM_SYS_CLKS] = { + {49, 5, 1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ + {35, 5, 1, 1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */ + {46, 8, 1, 1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */ + {34, 8, 1, 1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ + {64, 24, 1, 1, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */ +}; + +/* ABE M & N values with 32K clock as source */ +static const struct dpll_params abe_dpll_params_32k_196608khz = { + 750, 0, 1, 1, -1, -1, -1, -1, -1, -1 +}; + +static const struct dpll_params usb_dpll_params_1920mhz[NUM_SYS_CLKS] = { + {400, 4, 2, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */ + {400, 6, 2, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */ + {400, 7, 2, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */ + {480, 12, 2, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */ + {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */ + {400, 15, 2, -1, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */ +}; + +struct dplls omap5_dplls_es1 = { + .mpu = mpu_dpll_params_800mhz, + .core = core_dpll_params_2128mhz_ddr532, + .per = per_dpll_params_768mhz, + .iva = iva_dpll_params_2330mhz, +#ifdef CONFIG_SYS_OMAP_ABE_SYSCK + .abe = abe_dpll_params_sysclk_196608khz, +#else + .abe = &abe_dpll_params_32k_196608khz, +#endif + .usb = usb_dpll_params_1920mhz +}; + +/* + * Enable essential clock domains, modules and + * do some additional special settings needed + */ +void enable_basic_clocks(void) +{ + u32 const clk_domains_essential[] = { + (*prcm)->cm_l4per_clkstctrl, + (*prcm)->cm_l3init_clkstctrl, + (*prcm)->cm_memif_clkstctrl, + (*prcm)->cm_l4cfg_clkstctrl, + 0 + }; + + u32 const clk_modules_hw_auto_essential[] = { + (*prcm)->cm_l3_2_gpmc_clkctrl, + (*prcm)->cm_memif_emif_1_clkctrl, + (*prcm)->cm_memif_emif_2_clkctrl, + (*prcm)->cm_l4cfg_l4_cfg_clkctrl, + (*prcm)->cm_wkup_gpio1_clkctrl, + (*prcm)->cm_l4per_gpio2_clkctrl, + (*prcm)->cm_l4per_gpio3_clkctrl, + (*prcm)->cm_l4per_gpio4_clkctrl, + (*prcm)->cm_l4per_gpio5_clkctrl, + (*prcm)->cm_l4per_gpio6_clkctrl, + 0 + }; + + u32 const clk_modules_explicit_en_essential[] = { + (*prcm)->cm_wkup_gptimer1_clkctrl, + (*prcm)->cm_l3init_hsmmc1_clkctrl, + (*prcm)->cm_l3init_hsmmc2_clkctrl, + (*prcm)->cm_l4per_gptimer2_clkctrl, + (*prcm)->cm_wkup_wdtimer2_clkctrl, + (*prcm)->cm_l4per_uart3_clkctrl, + (*prcm)->cm_l4per_i2c1_clkctrl, + 0 + }; + + /* Enable optional additional functional clock for GPIO4 */ + setbits_le32((*prcm)->cm_l4per_gpio4_clkctrl, + GPIO4_CLKCTRL_OPTFCLKEN_MASK); + + /* Enable 96 MHz clock for MMC1 & MMC2 */ + setbits_le32((*prcm)->cm_l3init_hsmmc1_clkctrl, + HSMMC_CLKCTRL_CLKSEL_MASK); + setbits_le32((*prcm)->cm_l3init_hsmmc2_clkctrl, + HSMMC_CLKCTRL_CLKSEL_MASK); + + /* Set the correct clock dividers for mmc */ + setbits_le32((*prcm)->cm_l3init_hsmmc1_clkctrl, + HSMMC_CLKCTRL_CLKSEL_DIV_MASK); + setbits_le32((*prcm)->cm_l3init_hsmmc2_clkctrl, + HSMMC_CLKCTRL_CLKSEL_DIV_MASK); + + /* Select 32KHz clock as the source of GPTIMER1 */ + setbits_le32((*prcm)->cm_wkup_gptimer1_clkctrl, + GPTIMER1_CLKCTRL_CLKSEL_MASK); + + do_enable_clocks(clk_domains_essential, + clk_modules_hw_auto_essential, + clk_modules_explicit_en_essential, + 1); + + /* Select 384Mhz for GPU as its the POR for ES1.0 */ + setbits_le32((*prcm)->cm_sgx_sgx_clkctrl, + CLKSEL_GPU_HYD_GCLK_MASK); + setbits_le32((*prcm)->cm_sgx_sgx_clkctrl, + CLKSEL_GPU_CORE_GCLK_MASK); + + /* Enable SCRM OPT clocks for PER and CORE dpll */ + setbits_le32((*prcm)->cm_wkupaon_scrm_clkctrl, + OPTFCLKEN_SCRM_PER_MASK); + setbits_le32((*prcm)->cm_wkupaon_scrm_clkctrl, + OPTFCLKEN_SCRM_CORE_MASK); +} + +void enable_basic_uboot_clocks(void) +{ + u32 const clk_domains_essential[] = { + 0 + }; + + u32 const clk_modules_hw_auto_essential[] = { + 0 + }; + + u32 const clk_modules_explicit_en_essential[] = { + (*prcm)->cm_l4per_mcspi1_clkctrl, + (*prcm)->cm_l4per_i2c2_clkctrl, + (*prcm)->cm_l4per_i2c3_clkctrl, + (*prcm)->cm_l4per_i2c4_clkctrl, + (*prcm)->cm_l3init_hsusbtll_clkctrl, + (*prcm)->cm_l3init_hsusbhost_clkctrl, + (*prcm)->cm_l3init_fsusb_clkctrl, + 0 + }; + + do_enable_clocks(clk_domains_essential, + clk_modules_hw_auto_essential, + clk_modules_explicit_en_essential, + 1); +} + +/* + * Enable non-essential clock domains, modules and + * do some additional special settings needed + */ +void enable_non_essential_clocks(void) +{ + u32 const clk_domains_non_essential[] = { + (*prcm)->cm_mpu_m3_clkstctrl, + (*prcm)->cm_ivahd_clkstctrl, + (*prcm)->cm_dsp_clkstctrl, + (*prcm)->cm_dss_clkstctrl, + (*prcm)->cm_sgx_clkstctrl, + (*prcm)->cm1_abe_clkstctrl, + (*prcm)->cm_c2c_clkstctrl, + (*prcm)->cm_cam_clkstctrl, + (*prcm)->cm_dss_clkstctrl, + (*prcm)->cm_sdma_clkstctrl, + 0 + }; + + u32 const clk_modules_hw_auto_non_essential[] = { + (*prcm)->cm_mpu_m3_mpu_m3_clkctrl, + (*prcm)->cm_ivahd_ivahd_clkctrl, + (*prcm)->cm_ivahd_sl2_clkctrl, + (*prcm)->cm_dsp_dsp_clkctrl, + (*prcm)->cm_l3instr_l3_3_clkctrl, + (*prcm)->cm_l3instr_l3_instr_clkctrl, + (*prcm)->cm_l3instr_intrconn_wp1_clkctrl, + (*prcm)->cm_l3init_hsi_clkctrl, + (*prcm)->cm_l4per_hdq1w_clkctrl, + 0 + }; + + u32 const clk_modules_explicit_en_non_essential[] = { + (*prcm)->cm1_abe_aess_clkctrl, + (*prcm)->cm1_abe_pdm_clkctrl, + (*prcm)->cm1_abe_dmic_clkctrl, + (*prcm)->cm1_abe_mcasp_clkctrl, + (*prcm)->cm1_abe_mcbsp1_clkctrl, + (*prcm)->cm1_abe_mcbsp2_clkctrl, + (*prcm)->cm1_abe_mcbsp3_clkctrl, + (*prcm)->cm1_abe_slimbus_clkctrl, + (*prcm)->cm1_abe_timer5_clkctrl, + (*prcm)->cm1_abe_timer6_clkctrl, + (*prcm)->cm1_abe_timer7_clkctrl, + (*prcm)->cm1_abe_timer8_clkctrl, + (*prcm)->cm1_abe_wdt3_clkctrl, + (*prcm)->cm_l4per_gptimer9_clkctrl, + (*prcm)->cm_l4per_gptimer10_clkctrl, + (*prcm)->cm_l4per_gptimer11_clkctrl, + (*prcm)->cm_l4per_gptimer3_clkctrl, + (*prcm)->cm_l4per_gptimer4_clkctrl, + (*prcm)->cm_l4per_mcspi2_clkctrl, + (*prcm)->cm_l4per_mcspi3_clkctrl, + (*prcm)->cm_l4per_mcspi4_clkctrl, + (*prcm)->cm_l4per_mmcsd3_clkctrl, + (*prcm)->cm_l4per_mmcsd4_clkctrl, + (*prcm)->cm_l4per_mmcsd5_clkctrl, + (*prcm)->cm_l4per_uart1_clkctrl, + (*prcm)->cm_l4per_uart2_clkctrl, + (*prcm)->cm_l4per_uart4_clkctrl, + (*prcm)->cm_wkup_keyboard_clkctrl, + (*prcm)->cm_wkup_wdtimer2_clkctrl, + (*prcm)->cm_cam_iss_clkctrl, + (*prcm)->cm_cam_fdif_clkctrl, + (*prcm)->cm_dss_dss_clkctrl, + (*prcm)->cm_sgx_sgx_clkctrl, + 0 + }; + + /* Enable optional functional clock for ISS */ + setbits_le32((*prcm)->cm_cam_iss_clkctrl, ISS_CLKCTRL_OPTFCLKEN_MASK); + + /* Enable all optional functional clocks of DSS */ + setbits_le32((*prcm)->cm_dss_dss_clkctrl, DSS_CLKCTRL_OPTFCLKEN_MASK); + + do_enable_clocks(clk_domains_non_essential, + clk_modules_hw_auto_non_essential, + clk_modules_explicit_en_non_essential, + 0); + + /* Put camera module in no sleep mode */ + clrsetbits_le32((*prcm)->cm_cam_clkstctrl, + MODULE_CLKCTRL_MODULEMODE_MASK, + CD_CLKCTRL_CLKTRCTRL_NO_SLEEP << + MODULE_CLKCTRL_MODULEMODE_SHIFT); +} void hw_data_init(void) { + u32 omap_rev = omap_revision(); + + switch (omap_rev) { + + case OMAP5430_ES1_0: *prcm = &omap5_es1_prcm; + *dplls_data = &omap5_dplls_es1; + break; + + case OMAP5432_ES1_0: + *prcm = &omap5_es1_prcm; + *dplls_data = &omap5_dplls_es1; + break; + + default: + printf("\n INVALID OMAP REVISION "); + } } diff --git a/arch/arm/include/asm/arch-omap4/clocks.h b/arch/arm/include/asm/arch-omap4/clocks.h index 4710d88b4d..ceb3367449 100644 --- a/arch/arm/include/asm/arch-omap4/clocks.h +++ b/arch/arm/include/asm/arch-omap4/clocks.h @@ -242,55 +242,10 @@ #define DPLL_NO_LOCK 0 #define DPLL_LOCK 1 -#define NUM_SYS_CLKS 7 - -struct dpll_regs { - u32 cm_clkmode_dpll; - u32 cm_idlest_dpll; - u32 cm_autoidle_dpll; - u32 cm_clksel_dpll; - u32 cm_div_m2_dpll; - u32 cm_div_m3_dpll; - u32 cm_div_m4_dpll; - u32 cm_div_m5_dpll; - u32 cm_div_m6_dpll; - u32 cm_div_m7_dpll; -}; - -/* DPLL parameter table */ -struct dpll_params { - u32 m; - u32 n; - s8 m2; - s8 m3; - s8 m4; - s8 m5; - s8 m6; - s8 m7; -}; - -extern const u32 sys_clk_array[8]; - void scale_vcores(void); void do_scale_tps62361(int gpio, u32 reg, u32 volt_mv); u32 get_offset_code(u32 offset); -u32 omap_ddr_clk(void); void do_scale_vcore(u32 vcore_reg, u32 volt_mv); -void setup_post_dividers(u32 const base, const struct dpll_params *params); -u32 get_sys_clk_index(void); -void enable_basic_clocks(void); -void enable_basic_uboot_clocks(void); -void enable_non_essential_clocks(void); -void do_enable_clocks(u32 const *clk_domains, - u32 const *clk_modules_hw_auto, - u32 const *clk_modules_explicit_en, - u8 wait_for_enable); -const struct dpll_params *get_mpu_dpll_params(void); -const struct dpll_params *get_core_dpll_params(void); -const struct dpll_params *get_per_dpll_params(void); -const struct dpll_params *get_iva_dpll_params(void); -const struct dpll_params *get_usb_dpll_params(void); -const struct dpll_params *get_abe_dpll_params(void); struct omap4_scrm_regs { u32 revision; /* 0x0000 */ diff --git a/arch/arm/include/asm/arch-omap4/omap.h b/arch/arm/include/asm/arch-omap4/omap.h index 86ba3359ec..1c0ce9b38b 100644 --- a/arch/arm/include/asm/arch-omap4/omap.h +++ b/arch/arm/include/asm/arch-omap4/omap.h @@ -179,7 +179,8 @@ struct control_lpddr2io_regs { #define OMAP4_SRAM_SCRATCH_EMIF_T_NUM (SRAM_SCRATCH_SPACE_ADDR + 0xC) #define OMAP4_SRAM_SCRATCH_EMIF_T_DEN (SRAM_SCRATCH_SPACE_ADDR + 0x10) #define OMAP_SRAM_SCRATCH_PRCM_PTR (SRAM_SCRATCH_SPACE_ADDR + 0x14) -#define OMAP4_SRAM_SCRATCH_SPACE_END (SRAM_SCRATCH_SPACE_ADDR + 0x18) +#define OMAP_SRAM_SCRATCH_DPLLS_PTR (SRAM_SCRATCH_SPACE_ADDR + 0x18) +#define OMAP4_SRAM_SCRATCH_SPACE_END (SRAM_SCRATCH_SPACE_ADDR + 0x1C) /* ROM code defines */ /* Boot device */ diff --git a/arch/arm/include/asm/arch-omap5/clocks.h b/arch/arm/include/asm/arch-omap5/clocks.h index 67e74ca402..063347f69e 100644 --- a/arch/arm/include/asm/arch-omap5/clocks.h +++ b/arch/arm/include/asm/arch-omap5/clocks.h @@ -234,58 +234,8 @@ #define DPLL_NO_LOCK 0 #define DPLL_LOCK 1 -#define NUM_SYS_CLKS 7 - -struct dpll_regs { - u32 cm_clkmode_dpll; - u32 cm_idlest_dpll; - u32 cm_autoidle_dpll; - u32 cm_clksel_dpll; - u32 cm_div_m2_dpll; - u32 cm_div_m3_dpll; - u32 cm_div_h11_dpll; - u32 cm_div_h12_dpll; - u32 cm_div_h13_dpll; - u32 cm_div_h14_dpll; - u32 reserved[3]; - u32 cm_div_h22_dpll; - u32 cm_div_h23_dpll; -}; - -/* DPLL parameter table */ -struct dpll_params { - u32 m; - u32 n; - s8 m2; - s8 m3; - s8 h11; - s8 h12; - s8 h13; - s8 h14; - s8 h22; - s8 h23; -}; - -extern const u32 sys_clk_array[8]; - void scale_vcores(void); void do_scale_tps62361(int gpio, u32 reg, u32 volt_mv); u32 get_offset_code(u32 offset); -u32 omap_ddr_clk(void); void do_scale_vcore(u32 vcore_reg, u32 volt_mv); -void setup_post_dividers(u32 const base, const struct dpll_params *params); -u32 get_sys_clk_index(void); -void enable_basic_clocks(void); -void enable_non_essential_clocks(void); -void enable_basic_uboot_clocks(void); -void do_enable_clocks(u32 const *clk_domains, - u32 const *clk_modules_hw_auto, - u32 const *clk_modules_explicit_en, - u8 wait_for_enable); -const struct dpll_params *get_mpu_dpll_params(void); -const struct dpll_params *get_core_dpll_params(void); -const struct dpll_params *get_per_dpll_params(void); -const struct dpll_params *get_iva_dpll_params(void); -const struct dpll_params *get_usb_dpll_params(void); -const struct dpll_params *get_abe_dpll_params(void); #endif /* _CLOCKS_OMAP5_H_ */ diff --git a/arch/arm/include/asm/arch-omap5/omap.h b/arch/arm/include/asm/arch-omap5/omap.h index 50e055ec67..7123694045 100644 --- a/arch/arm/include/asm/arch-omap5/omap.h +++ b/arch/arm/include/asm/arch-omap5/omap.h @@ -272,7 +272,8 @@ struct omap_sys_ctrl_regs { #define OMAP5_SRAM_SCRATCH_EMIF_T_NUM (SRAM_SCRATCH_SPACE_ADDR + 0xC) #define OMAP5_SRAM_SCRATCH_EMIF_T_DEN (SRAM_SCRATCH_SPACE_ADDR + 0x10) #define OMAP_SRAM_SCRATCH_PRCM_PTR (SRAM_SCRATCH_SPACE_ADDR + 0x14) -#define OMAP5_SRAM_SCRATCH_SPACE_END (SRAM_SCRATCH_SPACE_ADDR + 0x18) +#define OMAP_SRAM_SCRATCH_DPLLS_PTR (SRAM_SCRATCH_SPACE_ADDR + 0x18) +#define OMAP5_SRAM_SCRATCH_SPACE_END (SRAM_SCRATCH_SPACE_ADDR + 0x1C) /* Silicon revisions */ #define OMAP4430_SILICON_ID_INVALID 0xFFFFFFFF diff --git a/arch/arm/include/asm/omap_common.h b/arch/arm/include/asm/omap_common.h index fcf9ce50d6..c2d8388b32 100644 --- a/arch/arm/include/asm/omap_common.h +++ b/arch/arm/include/asm/omap_common.h @@ -27,6 +27,8 @@ #include +#define NUM_SYS_CLKS 7 + struct prcm_regs { /* cm1.ckgen */ u32 cm_clksel_core; @@ -324,11 +326,72 @@ struct prcm_regs { u32 prm_vc_cfg_channel; }; +struct dpll_params { + u32 m; + u32 n; + s8 m2; + s8 m3; + s8 m4_h11; + s8 m5_h12; + s8 m6_h13; + s8 m7_h14; + s8 h22; + s8 h23; +}; + +struct dpll_regs { + u32 cm_clkmode_dpll; + u32 cm_idlest_dpll; + u32 cm_autoidle_dpll; + u32 cm_clksel_dpll; + u32 cm_div_m2_dpll; + u32 cm_div_m3_dpll; + u32 cm_div_m4_h11_dpll; + u32 cm_div_m5_h12_dpll; + u32 cm_div_m6_h13_dpll; + u32 cm_div_m7_h14_dpll; + u32 reserved[3]; + u32 cm_div_h22_dpll; + u32 cm_div_h23_dpll; +}; + +struct dplls { + const struct dpll_params *mpu; + const struct dpll_params *core; + const struct dpll_params *per; + const struct dpll_params *abe; + const struct dpll_params *iva; + const struct dpll_params *usb; +}; + extern struct prcm_regs const **prcm; extern struct prcm_regs const omap5_es1_prcm; extern struct prcm_regs const omap4_prcm; +extern struct dplls const **dplls_data; +extern const u32 sys_clk_array[8]; void hw_data_init(void); + +const struct dpll_params *get_mpu_dpll_params(struct dplls const *); +const struct dpll_params *get_core_dpll_params(struct dplls const *); +const struct dpll_params *get_per_dpll_params(struct dplls const *); +const struct dpll_params *get_iva_dpll_params(struct dplls const *); +const struct dpll_params *get_usb_dpll_params(struct dplls const *); +const struct dpll_params *get_abe_dpll_params(struct dplls const *); + +void do_enable_clocks(u32 const *clk_domains, + u32 const *clk_modules_hw_auto, + u32 const *clk_modules_explicit_en, + u8 wait_for_enable); + +void setup_post_dividers(u32 const base, + const struct dpll_params *params); +u32 omap_ddr_clk(void); +u32 get_sys_clk_index(void); +void enable_basic_clocks(void); +void enable_basic_uboot_clocks(void); +void enable_non_essential_clocks(void); + /* Max value for DPLL multiplier M */ #define OMAP_DPLL_MAX_N 127