From: Wolfgang Denk <wd@denx.de>
Date: Thu, 31 May 2007 15:20:09 +0000 (+0200)
Subject: Add support for STX GP3SSA (stxssa) Board with 4 MiB flash.
X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=ee1529838abbfaa35f14e3ffbeaaba693159475f;p=u-boot.git

Add support for STX GP3SSA (stxssa) Board with 4 MiB flash.

Signed-off-by: Wolfgang Denk <wd@denx.de>
---

diff --git a/Makefile b/Makefile
index 2fe9a4682f..356fb91687 100644
--- a/Makefile
+++ b/Makefile
@@ -1771,8 +1771,16 @@ sbc8560_66_config:      unconfig
 stxgp3_config:		unconfig
 	@$(MKCONFIG) $(@:_config=) ppc mpc85xx stxgp3
 
-stxssa_config:		unconfig
-	@$(MKCONFIG) $(@:_config=) ppc mpc85xx stxssa
+stxssa_config		\
+stxssa_4M_config:	unconfig
+	@mkdir -p $(obj)include
+	@if [ "$(findstring _4M_,$@)" ] ; then \
+		echo "#define CONFIG_STXSSA_4M" >>$(obj)include/config.h ; \
+		echo "... with 4 MiB flash memory" ; \
+	else \
+		>$(obj)include/config.h ; \
+	fi
+	@$(MKCONFIG) -a stxssa ppc mpc85xx stxssa
 
 TQM8540_config		\
 TQM8541_config		\
diff --git a/board/stxssa/config.mk b/board/stxssa/config.mk
index 30f42c53aa..5f4fc7403e 100644
--- a/board/stxssa/config.mk
+++ b/board/stxssa/config.mk
@@ -22,13 +22,12 @@
 # MA 02111-1307 USA
 #
 
-#
 # default CCARBAR is at 0xff700000
 # assume U-Boot is less than 0.5MB
 # U-Boot is less than 256K, so push
 # it further up into the flash
 #
-TEXT_BASE = 0xfffC0000
+TEXT_BASE = 0xFFFC0000
 
 PLATFORM_CPPFLAGS += -DCONFIG_MPC85xx=1
 PLATFORM_CPPFLAGS += -DCONFIG_E500=1
diff --git a/include/configs/stxssa.h b/include/configs/stxssa.h
index 8624f4b74b..1978a32bb1 100644
--- a/include/configs/stxssa.h
+++ b/include/configs/stxssa.h
@@ -80,16 +80,20 @@
  * This address, however, is used to configure a 256M local bus
  * window that includes the Config latch below.
  */
-#define CFG_LBC_OPTION_BASE	0xf0000000      /* Localbus Extension */
+#define CFG_LBC_OPTION_BASE	0xF0000000      /* Localbus Extension */
 #define CFG_LBC_OPTION_SIZE	256		/* 256MB */
 
 /* There are various flash options used, we configure for the largest,
  * which is 64Mbytes.  The CFI works fine and will discover the proper
  * sizes.
  */
-#define CFG_FLASH_BASE		0xFC000000      /* start of FLASH 64M    */
-#define CFG_BR0_PRELIM		0xFC001801	/* port size 32bit      */
-#define CFG_OR0_PRELIM		0xFC000FF7	/* 64 MB Flash           */
+#ifdef CONFIG_STXSSA_4M
+#define CFG_FLASH_BASE		0xFFC00000      /* start of  4 MiB flash */
+#else
+#define CFG_FLASH_BASE		0xFC000000      /* start of 64 MiB flash */
+#endif
+#define CFG_BR0_PRELIM	(CFG_FLASH_BASE | 0x1801) /* port size 32bit	 */
+#define CFG_OR0_PRELIM	(CFG_FLASH_BASE | 0x0FF7)
 
 #define CFG_FLASH_CFI		1
 #define CFG_FLASH_CFI_DRIVER	1
@@ -104,9 +108,9 @@
 /* The configuration latch is Chip Select 1.
  * It's an 8-bit latch in the lower 8 bits of the word.
  */
-#define CFG_LBC_CFGLATCH_BASE	0xfb000000	/* Base of config latch */
-#define CFG_BR1_PRELIM		0xfb001801	/* 32-bit port */
-#define CFG_OR1_PRELIM		0xffff0ff7      /* 64K is enough */
+#define CFG_LBC_CFGLATCH_BASE	0xFB000000	/* Base of config latch */
+#define CFG_BR1_PRELIM		0xFB001801	/* 32-bit port */
+#define CFG_OR1_PRELIM		0xFFFF0FF7      /* 64K is enough */
 
 #define CFG_MONITOR_BASE    	TEXT_BASE	/* start of monitor	*/
 
@@ -300,17 +304,20 @@
 
 /* Environment - default config is in flash, see below */
 #if 0	/* in EEPROM */
-#define CFG_ENV_IS_IN_EEPROM	1
-#define CFG_ENV_OFFSET		0
-#define CFG_ENV_SIZE		2048
+# define CFG_ENV_IS_IN_EEPROM	1
+# define CFG_ENV_OFFSET		0
+# define CFG_ENV_SIZE		2048
 #else	/* in flash */
-#define	CFG_ENV_IS_IN_FLASH	1
-#define CFG_ENV_SECT_SIZE	0x40000
-
-#define	CFG_ENV_ADDR		(CFG_MONITOR_BASE - CFG_ENV_SECT_SIZE)
-#define	CFG_ENV_SIZE		0x4000
-#define CFG_ENV_ADDR_REDUND	(CFG_ENV_ADDR - CFG_ENV_SECT_SIZE)
-#define CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)
+# define CFG_ENV_IS_IN_FLASH	1
+# ifdef CONFIG_STXSSA_4M
+#  define CFG_ENV_SECT_SIZE	0x20000
+# else	/* default configuration - 64 MiB flash */
+#  define CFG_ENV_SECT_SIZE	0x40000
+# endif
+# define CFG_ENV_ADDR		(CFG_MONITOR_BASE - CFG_ENV_SECT_SIZE)
+# define CFG_ENV_SIZE		0x4000
+# define CFG_ENV_ADDR_REDUND	(CFG_ENV_ADDR - CFG_ENV_SECT_SIZE)
+# define CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)
 #endif
 
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/