From: Anatolij Gustschin Date: Mon, 18 Mar 2019 22:29:45 +0000 (+0100) Subject: imx6: wandboard: convert to DM_PMIC X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=ec837c82d709;p=u-boot.git imx6: wandboard: convert to DM_PMIC Enable DM_PMIC_PFUZE100 driver and add PMIC description to DTS. Rework power_init_board() code. Signed-off-by: Anatolij Gustschin --- diff --git a/arch/arm/dts/imx6qdl-wandboard.dtsi b/arch/arm/dts/imx6qdl-wandboard.dtsi index 381bf61fcd..4d03d49fde 100644 --- a/arch/arm/dts/imx6qdl-wandboard.dtsi +++ b/arch/arm/dts/imx6qdl-wandboard.dtsi @@ -90,6 +90,107 @@ VDDIO-supply = <®_3p3v>; lrclk-strength = <3>; }; + + pmic: pfuze100@8 { + compatible = "fsl,pfuze100"; + reg = <0x08>; + + regulators { + sw1a_reg: sw1ab { + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + sw1c_reg: sw1c { + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + sw2_reg: sw2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + sw3a_reg: sw3a { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1975000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3b_reg: sw3b { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1975000>; + regulator-boot-on; + regulator-always-on; + }; + + sw4_reg: sw4 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + swbst_reg: swbst { + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5150000>; + }; + + snvs_reg: vsnvs { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3000000>; + regulator-boot-on; + regulator-always-on; + }; + + vref_reg: vrefddr { + regulator-boot-on; + regulator-always-on; + }; + + vgen1_reg: vgen1 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + }; + + vgen2_reg: vgen2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + }; + + vgen3_reg: vgen3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + vgen4_reg: vgen4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen5_reg: vgen5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen6_reg: vgen6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; + }; }; &iomuxc { diff --git a/board/wandboard/wandboard.c b/board/wandboard/wandboard.c index e0d5769131..23589df932 100644 --- a/board/wandboard/wandboard.c +++ b/board/wandboard/wandboard.c @@ -453,24 +453,30 @@ int board_early_init_f(void) int power_init_board(void) { - struct pmic *p; - u32 reg; - - /* configure PFUZE100 PMIC */ - power_pfuze100_init(PMIC_I2C_BUS); - p = pmic_get("PFUZE100"); - if (p && !pmic_probe(p)) { - pmic_reg_read(p, PFUZE100_DEVICEID, ®); - printf("PMIC: PFUZE100 ID=0x%02x\n", reg); - with_pmic = true; - - /* Set VGEN2 to 1.5V and enable */ - pmic_reg_read(p, PFUZE100_VGEN2VOL, ®); - reg &= ~(LDO_VOL_MASK); - reg |= (LDOA_1_50V | (1 << (LDO_EN))); - pmic_reg_write(p, PFUZE100_VGEN2VOL, reg); + struct udevice *dev; + int reg, ret; + + puts("PMIC: "); + + ret = pmic_get("pfuze100", &dev); + if (ret < 0) { + printf("pmic_get() ret %d\n", ret); + return 0; } + reg = pmic_reg_read(dev, PFUZE100_DEVICEID); + if (reg < 0) { + printf("pmic_reg_read() ret %d\n", reg); + return 0; + } + printf("PMIC: PFUZE100 ID=0x%02x\n", reg); + with_pmic = true; + + /* Set VGEN2 to 1.5V and enable */ + reg = pmic_reg_read(dev, PFUZE100_VGEN2VOL); + reg &= ~(LDO_VOL_MASK); + reg |= (LDOA_1_50V | (1 << (LDO_EN))); + pmic_reg_write(dev, PFUZE100_VGEN2VOL, reg); return 0; } diff --git a/configs/wandboard_defconfig b/configs/wandboard_defconfig index c4018cce4a..63f2639bd3 100644 --- a/configs/wandboard_defconfig +++ b/configs/wandboard_defconfig @@ -44,6 +44,8 @@ CONFIG_PHYLIB=y CONFIG_MII=y CONFIG_PINCTRL=y CONFIG_PINCTRL_IMX6=y +CONFIG_DM_PMIC=y +CONFIG_DM_PMIC_PFUZE100=y CONFIG_DM_THERMAL=y CONFIG_USB=y CONFIG_DM_USB=y diff --git a/include/configs/wandboard.h b/include/configs/wandboard.h index 13a9fd2450..aeb66ad454 100644 --- a/include/configs/wandboard.h +++ b/include/configs/wandboard.h @@ -40,12 +40,6 @@ #define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */ #define CONFIG_SYS_I2C_SPEED 100000 -/* PMIC */ -#define CONFIG_POWER -#define CONFIG_POWER_I2C -#define CONFIG_POWER_PFUZE100 -#define CONFIG_POWER_PFUZE100_I2C_ADDR 0x08 - /* MMC Configuration */ #define CONFIG_SYS_FSL_USDHC_NUM 2 #define CONFIG_SYS_FSL_ESDHC_ADDR 0