From: Trevor Woerner Date: Fri, 11 Jun 2021 02:37:03 +0000 (-0400) Subject: lpc32xx: import device tree from Linux X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=eb5807e68f4334bcc610acd827c889e0abe9231b;p=u-boot.git lpc32xx: import device tree from Linux Import the dtsi, dts, and clock binding files for the lpc32xx ea3250 board directly and unmodified from the latest Linux kernel. Signed-off-by: Trevor Woerner --- diff --git a/arch/arm/dts/lpc3250-ea3250.dts b/arch/arm/dts/lpc3250-ea3250.dts new file mode 100644 index 0000000000..63c6f17bb7 --- /dev/null +++ b/arch/arm/dts/lpc3250-ea3250.dts @@ -0,0 +1,273 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Embedded Artists LPC3250 board + * + * Copyright 2012 Roland Stigge + */ + +/dts-v1/; +#include "lpc32xx.dtsi" + +/ { + model = "Embedded Artists LPC3250 board based on NXP LPC3250"; + compatible = "ea,ea3250", "nxp,lpc3250"; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x4000000>; + }; + + gpio-keys { + compatible = "gpio-keys"; + autorepeat; + + button { + label = "Interrupt Key"; + linux,code = <103>; + gpios = <&gpio 4 1 0>; /* GPI_P3 1 */ + }; + + key1 { + label = "KEY1"; + linux,code = <1>; + gpios = <&pca9532 0 0>; + }; + + key2 { + label = "KEY2"; + linux,code = <2>; + gpios = <&pca9532 1 0>; + }; + + key3 { + label = "KEY3"; + linux,code = <3>; + gpios = <&pca9532 2 0>; + }; + + key4 { + label = "KEY4"; + linux,code = <4>; + gpios = <&pca9532 3 0>; + }; + + joy0 { + label = "Joystick Key 0"; + linux,code = <10>; + gpios = <&gpio 2 0 0>; /* P2.0 */ + }; + + joy1 { + label = "Joystick Key 1"; + linux,code = <11>; + gpios = <&gpio 2 1 0>; /* P2.1 */ + }; + + joy2 { + label = "Joystick Key 2"; + linux,code = <12>; + gpios = <&gpio 2 2 0>; /* P2.2 */ + }; + + joy3 { + label = "Joystick Key 3"; + linux,code = <13>; + gpios = <&gpio 2 3 0>; /* P2.3 */ + }; + + joy4 { + label = "Joystick Key 4"; + linux,code = <14>; + gpios = <&gpio 2 4 0>; /* P2.4 */ + }; + }; + + leds { + compatible = "gpio-leds"; + + /* LEDs on OEM Board */ + + led1 { + gpios = <&gpio 5 14 1>; /* GPO_P3 14, GPIO 93, active low */ + linux,default-trigger = "timer"; + default-state = "off"; + }; + + led2 { + gpios = <&gpio 2 10 1>; /* P2.10, active low */ + default-state = "off"; + }; + + led3 { + gpios = <&gpio 2 11 1>; /* P2.11, active low */ + default-state = "off"; + }; + + led4 { + gpios = <&gpio 2 12 1>; /* P2.12, active low */ + default-state = "off"; + }; + + /* LEDs on Base Board */ + + lede1 { + gpios = <&pca9532 8 0>; + default-state = "off"; + }; + lede2 { + gpios = <&pca9532 9 0>; + default-state = "off"; + }; + lede3 { + gpios = <&pca9532 10 0>; + default-state = "off"; + }; + lede4 { + gpios = <&pca9532 11 0>; + default-state = "off"; + }; + lede5 { + gpios = <&pca9532 12 0>; + default-state = "off"; + }; + lede6 { + gpios = <&pca9532 13 0>; + default-state = "off"; + }; + lede7 { + gpios = <&pca9532 14 0>; + default-state = "off"; + }; + lede8 { + gpios = <&pca9532 15 0>; + default-state = "off"; + }; + }; +}; + +/* 3-axis accelerometer X,Y,Z (or AD-IN instead of Z) */ +&adc { + status = "okay"; +}; + +&i2c1 { + clock-frequency = <100000>; + + uda1380: uda1380@18 { + compatible = "nxp,uda1380"; + reg = <0x18>; + power-gpio = <&gpio 3 10 0>; + reset-gpio = <&gpio 3 2 0>; + dac-clk = "wspll"; + }; + + eeprom@50 { + compatible = "atmel,24c256"; + reg = <0x50>; + }; + + eeprom@57 { + compatible = "atmel,24c64"; + reg = <0x57>; + }; + + pca9532: pca9532@60 { + compatible = "nxp,pca9532"; + gpio-controller; + #gpio-cells = <2>; + reg = <0x60>; + }; +}; + +&i2c2 { + clock-frequency = <100000>; +}; + +&i2cusb { + clock-frequency = <100000>; + + isp1301: usb-transceiver@2d { + compatible = "nxp,isp1301"; + reg = <0x2d>; + }; +}; + +&mac { + phy-mode = "rmii"; + use-iram; + status = "okay"; +}; + +/* Here, choose exactly one from: ohci, usbd */ +&ohci /* &usbd */ { + transceiver = <&isp1301>; + status = "okay"; +}; + +&sd { + wp-gpios = <&pca9532 5 0>; + cd-gpios = <&pca9532 4 0>; + cd-inverted; + bus-width = <4>; + status = "okay"; +}; + +/* 128MB Flash via SLC NAND controller */ +&slc { + status = "okay"; + + nxp,wdr-clks = <14>; + nxp,wwidth = <260000000>; + nxp,whold = <104000000>; + nxp,wsetup = <200000000>; + nxp,rdr-clks = <14>; + nxp,rwidth = <34666666>; + nxp,rhold = <104000000>; + nxp,rsetup = <200000000>; + nand-on-flash-bbt; + gpios = <&gpio 5 19 1>; /* GPO_P3 19, active low */ + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + mtd0@0 { + label = "ea3250-boot"; + reg = <0x00000000 0x00080000>; + read-only; + }; + + mtd1@80000 { + label = "ea3250-uboot"; + reg = <0x00080000 0x000c0000>; + read-only; + }; + + mtd2@140000 { + label = "ea3250-kernel"; + reg = <0x00140000 0x00400000>; + }; + + mtd3@540000 { + label = "ea3250-rootfs"; + reg = <0x00540000 0x07ac0000>; + }; + }; +}; + +&uart1 { + status = "okay"; +}; + +&uart3 { + status = "okay"; +}; + +&uart5 { + status = "okay"; +}; + +&uart6 { + status = "okay"; +}; diff --git a/arch/arm/dts/lpc32xx.dtsi b/arch/arm/dts/lpc32xx.dtsi new file mode 100644 index 0000000000..c87066d6c9 --- /dev/null +++ b/arch/arm/dts/lpc32xx.dtsi @@ -0,0 +1,508 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * NXP LPC32xx SoC + * + * Copyright (C) 2015-2019 Vladimir Zapolskiy + * Copyright 2012 Roland Stigge + */ + +#include +#include + +/ { + #address-cells = <1>; + #size-cells = <1>; + compatible = "nxp,lpc3220"; + interrupt-parent = <&mic>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + compatible = "arm,arm926ej-s"; + device_type = "cpu"; + reg = <0x0>; + }; + }; + + clocks { + xtal_32k: xtal_32k { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "xtal_32k"; + }; + + xtal: xtal { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <13000000>; + clock-output-names = "xtal"; + }; + }; + + ahb { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + ranges = <0x00000000 0x00000000 0x10000000>, + <0x20000000 0x20000000 0x30000000>, + <0xe0000000 0xe0000000 0x04000000>; + + iram: sram@8000000 { + compatible = "mmio-sram"; + reg = <0x08000000 0x20000>; + + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x00000000 0x08000000 0x20000>; + }; + + /* + * Enable either SLC or MLC + */ + slc: flash@20020000 { + compatible = "nxp,lpc3220-slc"; + reg = <0x20020000 0x1000>; + clocks = <&clk LPC32XX_CLK_SLC>; + status = "disabled"; + }; + + mlc: flash@200a8000 { + compatible = "nxp,lpc3220-mlc"; + reg = <0x200a8000 0x11000>; + interrupts = <11 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk LPC32XX_CLK_MLC>; + status = "disabled"; + }; + + dma: dma@31000000 { + compatible = "arm,pl080", "arm,primecell"; + reg = <0x31000000 0x1000>; + interrupts = <28 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk LPC32XX_CLK_DMA>; + clock-names = "apb_pclk"; + }; + + usb { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + ranges = <0x0 0x31020000 0x00001000>; + + /* + * Enable either ohci or usbd (gadget)! + */ + ohci: ohci@0 { + compatible = "nxp,ohci-nxp", "usb-ohci"; + reg = <0x0 0x300>; + interrupt-parent = <&sic1>; + interrupts = <27 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&usbclk LPC32XX_USB_CLK_HOST>; + status = "disabled"; + }; + + usbd: usbd@0 { + compatible = "nxp,lpc3220-udc"; + reg = <0x0 0x300>; + interrupt-parent = <&sic1>; + interrupts = <29 IRQ_TYPE_LEVEL_HIGH>, + <30 IRQ_TYPE_LEVEL_HIGH>, + <28 IRQ_TYPE_LEVEL_HIGH>, + <26 IRQ_TYPE_LEVEL_LOW>; + clocks = <&usbclk LPC32XX_USB_CLK_DEVICE>; + status = "disabled"; + }; + + i2cusb: i2c@300 { + compatible = "nxp,pnx-i2c"; + reg = <0x300 0x100>; + interrupt-parent = <&sic1>; + interrupts = <31 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&usbclk LPC32XX_USB_CLK_I2C>; + #address-cells = <1>; + #size-cells = <0>; + }; + + usbclk: clock-controller@f00 { + compatible = "nxp,lpc3220-usb-clk"; + reg = <0xf00 0x100>; + #clock-cells = <1>; + }; + }; + + clcd: clcd@31040000 { + compatible = "arm,pl111", "arm,primecell"; + reg = <0x31040000 0x1000>; + interrupts = <14 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk LPC32XX_CLK_LCD>, <&clk LPC32XX_CLK_LCD>; + clock-names = "clcdclk", "apb_pclk"; + status = "disabled"; + }; + + mac: ethernet@31060000 { + compatible = "nxp,lpc-eth"; + reg = <0x31060000 0x1000>; + interrupts = <29 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk LPC32XX_CLK_MAC>; + status = "disabled"; + }; + + emc: memory-controller@31080000 { + compatible = "arm,pl175", "arm,primecell"; + reg = <0x31080000 0x1000>; + clocks = <&clk LPC32XX_CLK_DDRAM>, <&clk LPC32XX_CLK_DDRAM>; + clock-names = "mpmcclk", "apb_pclk"; + #address-cells = <1>; + #size-cells = <1>; + + ranges = <0 0xe0000000 0x01000000>, + <1 0xe1000000 0x01000000>, + <2 0xe2000000 0x01000000>, + <3 0xe3000000 0x01000000>; + status = "disabled"; + }; + + apb { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + ranges = <0x20000000 0x20000000 0x30000000>; + + /* + * ssp0 and spi1 are shared pins; + * enable one in your board dts, as needed. + */ + ssp0: spi@20084000 { + compatible = "arm,pl022", "arm,primecell"; + reg = <0x20084000 0x1000>; + interrupts = <20 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk LPC32XX_CLK_SSP0>; + clock-names = "apb_pclk"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi1: spi@20088000 { + compatible = "nxp,lpc3220-spi"; + reg = <0x20088000 0x1000>; + clocks = <&clk LPC32XX_CLK_SPI1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + /* + * ssp1 and spi2 are shared pins; + * enable one in your board dts, as needed. + */ + ssp1: spi@2008c000 { + compatible = "arm,pl022", "arm,primecell"; + reg = <0x2008c000 0x1000>; + interrupts = <21 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk LPC32XX_CLK_SSP1>; + clock-names = "apb_pclk"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi2: spi@20090000 { + compatible = "nxp,lpc3220-spi"; + reg = <0x20090000 0x1000>; + clocks = <&clk LPC32XX_CLK_SPI2>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2s0: i2s@20094000 { + compatible = "nxp,lpc3220-i2s"; + reg = <0x20094000 0x1000>; + status = "disabled"; + }; + + sd: sd@20098000 { + compatible = "arm,pl18x", "arm,primecell"; + reg = <0x20098000 0x1000>; + interrupts = <15 IRQ_TYPE_LEVEL_HIGH>, + <13 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk LPC32XX_CLK_SD>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + + i2s1: i2s@2009c000 { + compatible = "nxp,lpc3220-i2s"; + reg = <0x2009c000 0x1000>; + status = "disabled"; + }; + + /* UART5 first since it is the default console, ttyS0 */ + uart5: serial@40090000 { + /* actually, ns16550a w/ 64 byte fifos! */ + compatible = "nxp,lpc3220-uart"; + reg = <0x40090000 0x1000>; + interrupts = <9 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + clocks = <&clk LPC32XX_CLK_UART5>; + status = "disabled"; + }; + + uart3: serial@40080000 { + compatible = "nxp,lpc3220-uart"; + reg = <0x40080000 0x1000>; + interrupts = <7 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + clocks = <&clk LPC32XX_CLK_UART3>; + status = "disabled"; + }; + + uart4: serial@40088000 { + compatible = "nxp,lpc3220-uart"; + reg = <0x40088000 0x1000>; + interrupts = <8 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + clocks = <&clk LPC32XX_CLK_UART4>; + status = "disabled"; + }; + + uart6: serial@40098000 { + compatible = "nxp,lpc3220-uart"; + reg = <0x40098000 0x1000>; + interrupts = <10 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + clocks = <&clk LPC32XX_CLK_UART6>; + status = "disabled"; + }; + + i2c1: i2c@400a0000 { + compatible = "nxp,pnx-i2c"; + reg = <0x400a0000 0x100>; + interrupt-parent = <&sic1>; + interrupts = <19 IRQ_TYPE_LEVEL_LOW>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clk LPC32XX_CLK_I2C1>; + }; + + i2c2: i2c@400a8000 { + compatible = "nxp,pnx-i2c"; + reg = <0x400a8000 0x100>; + interrupt-parent = <&sic1>; + interrupts = <18 IRQ_TYPE_LEVEL_LOW>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clk LPC32XX_CLK_I2C2>; + }; + + mpwm: mpwm@400e8000 { + compatible = "nxp,lpc3220-motor-pwm"; + reg = <0x400e8000 0x78>; + status = "disabled"; + #pwm-cells = <2>; + }; + }; + + fab { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + ranges = <0x20000000 0x20000000 0x30000000>; + + /* System Control Block */ + scb { + compatible = "simple-bus"; + ranges = <0x0 0x040004000 0x00001000>; + #address-cells = <1>; + #size-cells = <1>; + + clk: clock-controller@0 { + compatible = "nxp,lpc3220-clk"; + reg = <0x00 0x114>; + #clock-cells = <1>; + + clocks = <&xtal_32k>, <&xtal>; + clock-names = "xtal_32k", "xtal"; + }; + }; + + mic: interrupt-controller@40008000 { + compatible = "nxp,lpc3220-mic"; + reg = <0x40008000 0x4000>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + sic1: interrupt-controller@4000c000 { + compatible = "nxp,lpc3220-sic"; + reg = <0x4000c000 0x4000>; + interrupt-controller; + #interrupt-cells = <2>; + + interrupt-parent = <&mic>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>, + <30 IRQ_TYPE_LEVEL_LOW>; + }; + + sic2: interrupt-controller@40010000 { + compatible = "nxp,lpc3220-sic"; + reg = <0x40010000 0x4000>; + interrupt-controller; + #interrupt-cells = <2>; + + interrupt-parent = <&mic>; + interrupts = <1 IRQ_TYPE_LEVEL_LOW>, + <31 IRQ_TYPE_LEVEL_LOW>; + }; + + uart1: serial@40014000 { + compatible = "nxp,lpc3220-hsuart"; + reg = <0x40014000 0x1000>; + interrupts = <26 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + uart2: serial@40018000 { + compatible = "nxp,lpc3220-hsuart"; + reg = <0x40018000 0x1000>; + interrupts = <25 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + uart7: serial@4001c000 { + compatible = "nxp,lpc3220-hsuart"; + reg = <0x4001c000 0x1000>; + interrupts = <24 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + rtc: rtc@40024000 { + compatible = "nxp,lpc3220-rtc"; + reg = <0x40024000 0x1000>; + interrupt-parent = <&sic1>; + interrupts = <20 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk LPC32XX_CLK_RTC>; + }; + + gpio: gpio@40028000 { + compatible = "nxp,lpc3220-gpio"; + reg = <0x40028000 0x1000>; + gpio-controller; + #gpio-cells = <3>; /* bank, pin, flags */ + }; + + timer4: timer@4002c000 { + compatible = "nxp,lpc3220-timer"; + reg = <0x4002c000 0x1000>; + interrupts = <3 IRQ_TYPE_LEVEL_LOW>; + clocks = <&clk LPC32XX_CLK_TIMER4>; + clock-names = "timerclk"; + status = "disabled"; + }; + + timer5: timer@40030000 { + compatible = "nxp,lpc3220-timer"; + reg = <0x40030000 0x1000>; + interrupts = <4 IRQ_TYPE_LEVEL_LOW>; + clocks = <&clk LPC32XX_CLK_TIMER5>; + clock-names = "timerclk"; + status = "disabled"; + }; + + watchdog: watchdog@4003c000 { + compatible = "nxp,pnx4008-wdt"; + reg = <0x4003c000 0x1000>; + clocks = <&clk LPC32XX_CLK_WDOG>; + }; + + timer0: timer@40044000 { + compatible = "nxp,lpc3220-timer"; + reg = <0x40044000 0x1000>; + clocks = <&clk LPC32XX_CLK_TIMER0>; + clock-names = "timerclk"; + interrupts = <16 IRQ_TYPE_LEVEL_LOW>; + }; + + /* + * TSC vs. ADC: Since those two share the same + * hardware, you need to choose from one of the + * following two and do 'status = "okay";' for one of + * them + */ + + adc: adc@40048000 { + compatible = "nxp,lpc3220-adc"; + reg = <0x40048000 0x1000>; + interrupt-parent = <&sic1>; + interrupts = <7 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk LPC32XX_CLK_ADC>; + status = "disabled"; + }; + + tsc: tsc@40048000 { + compatible = "nxp,lpc3220-tsc"; + reg = <0x40048000 0x1000>; + interrupt-parent = <&sic1>; + interrupts = <7 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk LPC32XX_CLK_ADC>; + status = "disabled"; + }; + + timer1: timer@4004c000 { + compatible = "nxp,lpc3220-timer"; + reg = <0x4004c000 0x1000>; + interrupts = <17 IRQ_TYPE_LEVEL_LOW>; + clocks = <&clk LPC32XX_CLK_TIMER1>; + clock-names = "timerclk"; + }; + + key: key@40050000 { + compatible = "nxp,lpc3220-key"; + reg = <0x40050000 0x1000>; + clocks = <&clk LPC32XX_CLK_KEY>; + interrupt-parent = <&sic1>; + interrupts = <22 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + timer2: timer@40058000 { + compatible = "nxp,lpc3220-timer"; + reg = <0x40058000 0x1000>; + interrupts = <18 IRQ_TYPE_LEVEL_LOW>; + clocks = <&clk LPC32XX_CLK_TIMER2>; + clock-names = "timerclk"; + status = "disabled"; + }; + + pwm1: pwm@4005c000 { + compatible = "nxp,lpc3220-pwm"; + reg = <0x4005c000 0x4>; + clocks = <&clk LPC32XX_CLK_PWM1>; + assigned-clocks = <&clk LPC32XX_CLK_PWM1>; + assigned-clock-parents = <&clk LPC32XX_CLK_PERIPH>; + status = "disabled"; + }; + + pwm2: pwm@4005c004 { + compatible = "nxp,lpc3220-pwm"; + reg = <0x4005c004 0x4>; + clocks = <&clk LPC32XX_CLK_PWM2>; + assigned-clocks = <&clk LPC32XX_CLK_PWM2>; + assigned-clock-parents = <&clk LPC32XX_CLK_PERIPH>; + status = "disabled"; + }; + + timer3: timer@40060000 { + compatible = "nxp,lpc3220-timer"; + reg = <0x40060000 0x1000>; + interrupts = <19 IRQ_TYPE_LEVEL_LOW>; + clocks = <&clk LPC32XX_CLK_TIMER3>; + clock-names = "timerclk"; + status = "disabled"; + }; + }; + }; +}; diff --git a/include/dt-bindings/clock/lpc32xx-clock.h b/include/dt-bindings/clock/lpc32xx-clock.h new file mode 100644 index 0000000000..e624d3a527 --- /dev/null +++ b/include/dt-bindings/clock/lpc32xx-clock.h @@ -0,0 +1,58 @@ +/* + * Copyright (c) 2015 Vladimir Zapolskiy + * + * This code is released using a dual license strategy: BSD/GPL + * You can choose the licence that better fits your requirements. + * + * Released under the terms of 3-clause BSD License + * Released under the terms of GNU General Public License Version 2.0 + * + */ + +#ifndef __DT_BINDINGS_LPC32XX_CLOCK_H +#define __DT_BINDINGS_LPC32XX_CLOCK_H + +/* LPC32XX System Control Block clocks */ +#define LPC32XX_CLK_RTC 1 +#define LPC32XX_CLK_DMA 2 +#define LPC32XX_CLK_MLC 3 +#define LPC32XX_CLK_SLC 4 +#define LPC32XX_CLK_LCD 5 +#define LPC32XX_CLK_MAC 6 +#define LPC32XX_CLK_SD 7 +#define LPC32XX_CLK_DDRAM 8 +#define LPC32XX_CLK_SSP0 9 +#define LPC32XX_CLK_SSP1 10 +#define LPC32XX_CLK_UART3 11 +#define LPC32XX_CLK_UART4 12 +#define LPC32XX_CLK_UART5 13 +#define LPC32XX_CLK_UART6 14 +#define LPC32XX_CLK_IRDA 15 +#define LPC32XX_CLK_I2C1 16 +#define LPC32XX_CLK_I2C2 17 +#define LPC32XX_CLK_TIMER0 18 +#define LPC32XX_CLK_TIMER1 19 +#define LPC32XX_CLK_TIMER2 20 +#define LPC32XX_CLK_TIMER3 21 +#define LPC32XX_CLK_TIMER4 22 +#define LPC32XX_CLK_TIMER5 23 +#define LPC32XX_CLK_WDOG 24 +#define LPC32XX_CLK_I2S0 25 +#define LPC32XX_CLK_I2S1 26 +#define LPC32XX_CLK_SPI1 27 +#define LPC32XX_CLK_SPI2 28 +#define LPC32XX_CLK_MCPWM 29 +#define LPC32XX_CLK_HSTIMER 30 +#define LPC32XX_CLK_KEY 31 +#define LPC32XX_CLK_PWM1 32 +#define LPC32XX_CLK_PWM2 33 +#define LPC32XX_CLK_ADC 34 +#define LPC32XX_CLK_HCLK_PLL 35 +#define LPC32XX_CLK_PERIPH 36 + +/* LPC32XX USB clocks */ +#define LPC32XX_USB_CLK_I2C 1 +#define LPC32XX_USB_CLK_DEVICE 2 +#define LPC32XX_USB_CLK_HOST 3 + +#endif /* __DT_BINDINGS_LPC32XX_CLOCK_H */