From: Marek Vasut Date: Tue, 4 Apr 2023 19:25:10 +0000 (+0200) Subject: thermal: imx_tmu: Move architecture code into driver X-Git-Url: http://git.dujemihanovic.xyz/?a=commitdiff_plain;h=eb1e370a9baeb0c50401a7473c8f564541e155ea;p=u-boot.git thermal: imx_tmu: Move architecture code into driver Stop polluting the architecture directory with driver specific code, move it into driver where it should be. Split the code slightly so the MX8MM/MX8MN fuse readout and programming and MX8MP fuse readout and programming are in their separate functions, and called in case of matching SoC. Signed-off-by: Marek Vasut Reviewed-by: Fabio Estevam Reviewed-by: Andrejs Cainikovs --- diff --git a/arch/arm/mach-imx/imx8m/soc.c b/arch/arm/mach-imx/imx8m/soc.c index a7b4d622af..5ffdcabbb5 100644 --- a/arch/arm/mach-imx/imx8m/soc.c +++ b/arch/arm/mach-imx/imx8m/soc.c @@ -1430,79 +1430,6 @@ int arch_misc_init(void) } #endif -void imx_tmu_arch_init(void *reg_base) -{ - if (is_imx8mm() || is_imx8mn()) { - /* Load TCALIV and TASR from fuses */ - struct ocotp_regs *ocotp = - (struct ocotp_regs *)OCOTP_BASE_ADDR; - struct fuse_bank *bank = &ocotp->bank[3]; - struct fuse_bank3_regs *fuse = - (struct fuse_bank3_regs *)bank->fuse_regs; - - u32 tca_rt, tca_hr, tca_en; - u32 buf_vref, buf_slope; - - tca_rt = fuse->ana0 & 0xFF; - tca_hr = (fuse->ana0 & 0xFF00) >> 8; - tca_en = (fuse->ana0 & 0x2000000) >> 25; - - buf_vref = (fuse->ana0 & 0x1F00000) >> 20; - buf_slope = (fuse->ana0 & 0xF0000) >> 16; - - writel(buf_vref | (buf_slope << 16), (ulong)reg_base + 0x28); - writel((tca_en << 31) | (tca_hr << 16) | tca_rt, - (ulong)reg_base + 0x30); - } -#ifdef CONFIG_IMX8MP - /* Load TCALIV0/1/m40 and TRIM from fuses */ - struct ocotp_regs *ocotp = (struct ocotp_regs *)OCOTP_BASE_ADDR; - struct fuse_bank *bank = &ocotp->bank[38]; - struct fuse_bank38_regs *fuse = - (struct fuse_bank38_regs *)bank->fuse_regs; - struct fuse_bank *bank2 = &ocotp->bank[39]; - struct fuse_bank39_regs *fuse2 = - (struct fuse_bank39_regs *)bank2->fuse_regs; - u32 buf_vref, buf_slope, bjt_cur, vlsb, bgr; - u32 reg; - u32 tca40[2], tca25[2], tca105[2]; - - /* For blank sample */ - if (!fuse->ana_trim2 && !fuse->ana_trim3 && - !fuse->ana_trim4 && !fuse2->ana_trim5) { - /* Use a default 25C binary codes */ - tca25[0] = 1596; - tca25[1] = 1596; - writel(tca25[0], (ulong)reg_base + 0x30); - writel(tca25[1], (ulong)reg_base + 0x34); - return; - } - - buf_vref = (fuse->ana_trim2 & 0xc0) >> 6; - buf_slope = (fuse->ana_trim2 & 0xF00) >> 8; - bjt_cur = (fuse->ana_trim2 & 0xF000) >> 12; - bgr = (fuse->ana_trim2 & 0xF0000) >> 16; - vlsb = (fuse->ana_trim2 & 0xF00000) >> 20; - writel(buf_vref | (buf_slope << 16), (ulong)reg_base + 0x28); - - reg = (bgr << 28) | (bjt_cur << 20) | (vlsb << 12) | (1 << 7); - writel(reg, (ulong)reg_base + 0x3c); - - tca40[0] = (fuse->ana_trim3 & 0xFFF0000) >> 16; - tca25[0] = (fuse->ana_trim3 & 0xF0000000) >> 28; - tca25[0] |= ((fuse->ana_trim4 & 0xFF) << 4); - tca105[0] = (fuse->ana_trim4 & 0xFFF00) >> 8; - tca40[1] = (fuse->ana_trim4 & 0xFFF00000) >> 20; - tca25[1] = fuse2->ana_trim5 & 0xFFF; - tca105[1] = (fuse2->ana_trim5 & 0xFFF000) >> 12; - - /* use 25c for 1p calibration */ - writel(tca25[0] | (tca105[0] << 16), (ulong)reg_base + 0x30); - writel(tca25[1] | (tca105[1] << 16), (ulong)reg_base + 0x34); - writel(tca40[0] | (tca40[1] << 16), (ulong)reg_base + 0x38); -#endif -} - #if defined(CONFIG_SPL_BUILD) #if defined(CONFIG_IMX8MQ) || defined(CONFIG_IMX8MM) || defined(CONFIG_IMX8MN) bool serror_need_skip = true; diff --git a/drivers/thermal/imx_tmu.c b/drivers/thermal/imx_tmu.c index 8d638797eb..eb5605590f 100644 --- a/drivers/thermal/imx_tmu.c +++ b/drivers/thermal/imx_tmu.c @@ -244,8 +244,99 @@ static int imx_tmu_calibration(struct udevice *dev) return 0; } -void __weak imx_tmu_arch_init(void *reg_base) +#if defined(CONFIG_IMX8MM) || defined(CONFIG_IMX8MN) +static void imx_tmu_mx8mm_mx8mn_init(struct udevice *dev) { + /* Load TCALIV and TASR from fuses */ + struct ocotp_regs *ocotp = + (struct ocotp_regs *)OCOTP_BASE_ADDR; + struct fuse_bank *bank = &ocotp->bank[3]; + struct fuse_bank3_regs *fuse = + (struct fuse_bank3_regs *)bank->fuse_regs; + struct imx_tmu_plat *pdata = dev_get_plat(dev); + void *reg_base = (void *)pdata->regs; + + u32 tca_rt, tca_hr, tca_en; + u32 buf_vref, buf_slope; + + tca_rt = fuse->ana0 & 0xFF; + tca_hr = (fuse->ana0 & 0xFF00) >> 8; + tca_en = (fuse->ana0 & 0x2000000) >> 25; + + buf_vref = (fuse->ana0 & 0x1F00000) >> 20; + buf_slope = (fuse->ana0 & 0xF0000) >> 16; + + writel(buf_vref | (buf_slope << 16), (ulong)reg_base + 0x28); + writel((tca_en << 31) | (tca_hr << 16) | tca_rt, + (ulong)reg_base + 0x30); +} +#else +static inline void imx_tmu_mx8mm_mx8mn_init(struct udevice *dev) { } +#endif + +#if defined(CONFIG_IMX8MP) +static void imx_tmu_mx8mp_init(struct udevice *dev) +{ + /* Load TCALIV0/1/m40 and TRIM from fuses */ + struct ocotp_regs *ocotp = (struct ocotp_regs *)OCOTP_BASE_ADDR; + struct fuse_bank *bank = &ocotp->bank[38]; + struct fuse_bank38_regs *fuse = + (struct fuse_bank38_regs *)bank->fuse_regs; + struct fuse_bank *bank2 = &ocotp->bank[39]; + struct fuse_bank39_regs *fuse2 = + (struct fuse_bank39_regs *)bank2->fuse_regs; + struct imx_tmu_plat *pdata = dev_get_plat(dev); + void *reg_base = (void *)pdata->regs; + u32 buf_vref, buf_slope, bjt_cur, vlsb, bgr; + u32 reg; + u32 tca40[2], tca25[2], tca105[2]; + + /* For blank sample */ + if (!fuse->ana_trim2 && !fuse->ana_trim3 && + !fuse->ana_trim4 && !fuse2->ana_trim5) { + /* Use a default 25C binary codes */ + tca25[0] = 1596; + tca25[1] = 1596; + writel(tca25[0], (ulong)reg_base + 0x30); + writel(tca25[1], (ulong)reg_base + 0x34); + return; + } + + buf_vref = (fuse->ana_trim2 & 0xc0) >> 6; + buf_slope = (fuse->ana_trim2 & 0xF00) >> 8; + bjt_cur = (fuse->ana_trim2 & 0xF000) >> 12; + bgr = (fuse->ana_trim2 & 0xF0000) >> 16; + vlsb = (fuse->ana_trim2 & 0xF00000) >> 20; + writel(buf_vref | (buf_slope << 16), (ulong)reg_base + 0x28); + + reg = (bgr << 28) | (bjt_cur << 20) | (vlsb << 12) | (1 << 7); + writel(reg, (ulong)reg_base + 0x3c); + + tca40[0] = (fuse->ana_trim3 & 0xFFF0000) >> 16; + tca25[0] = (fuse->ana_trim3 & 0xF0000000) >> 28; + tca25[0] |= ((fuse->ana_trim4 & 0xFF) << 4); + tca105[0] = (fuse->ana_trim4 & 0xFFF00) >> 8; + tca40[1] = (fuse->ana_trim4 & 0xFFF00000) >> 20; + tca25[1] = fuse2->ana_trim5 & 0xFFF; + tca105[1] = (fuse2->ana_trim5 & 0xFFF000) >> 12; + + /* use 25c for 1p calibration */ + writel(tca25[0] | (tca105[0] << 16), (ulong)reg_base + 0x30); + writel(tca25[1] | (tca105[1] << 16), (ulong)reg_base + 0x34); + writel(tca40[0] | (tca40[1] << 16), (ulong)reg_base + 0x38); +} +#else +static inline void imx_tmu_mx8mp_init(struct udevice *dev) { } +#endif + +static void imx_tmu_arch_init(struct udevice *dev) +{ + if (is_imx8mm() || is_imx8mn()) + imx_tmu_mx8mm_mx8mn_init(dev); + else if (is_imx8mp()) + imx_tmu_mx8mp_init(dev); + else + dev_err(dev, "Unsupported SoC, TMU calibration not loaded!\n"); } static void imx_tmu_init(struct udevice *dev) @@ -279,7 +370,7 @@ static void imx_tmu_init(struct udevice *dev) writel(TMTMIR_DEFAULT, &pdata->regs->regs_v1.tmtmir); } - imx_tmu_arch_init((void *)pdata->regs); + imx_tmu_arch_init(dev); } static int imx_tmu_enable_msite(struct udevice *dev)